Steady-state frictional sliding contact on surfaces of plastically graded materials

Acta Materialia

Volumn 57, Issue 2, 2009, Pages 511-524

  Prasad, A ^a   Dao, M ^a   Suresh, S ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

Author keywords

Finite element method; Pile up; Plastically graded material; Scratch test; Tribology

Indexed keywords

BEAMS AND GIRDERS; ELASTOPLASTICITY; FINITE ELEMENT METHOD; FRICTION; MACHINE DESIGN; PILES; STRESSES; SURFACE PROPERTIES; TESTING; TRIBOLOGY; VICKERS HARDNESS TESTING; YIELD STRESS;

ABRASIVE WEARS; ELASTIC PLASTICS; FRICTIONAL SLIDING; INDENTER; INTERFACIAL FRICTIONS; LINEAR GRADIENTS; LOAD-CARRYING CAPACITIES; MISES STRESSES; PEAK VALUES; PILE-UP; PLASTICALLY GRADED MATERIAL; SCRATCH TEST; SLIDING CONTACTS; SURFACE DAMAGES; SURFACE SHIFTS; SYSTEMATIC METHODOLOGIES; TEST MATERIALS; TRIBOLOGICAL APPLICATIONS; YIELD STRENGTHS;

SURFACES;

EID: 57949097748     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2008.09.036     Document Type: Article

References (62)

1. Beste U., Hartzell T., Engqvist H., and Axen N. Surface damage on cemented carbide rock-drill buttons. Wear 249 (2001) 324
2. Bhushan B. Nanotribology and nanomechanics of MEMS/NEMS and BioMEMS/BioNEMS materials and devices. Microelectron Eng 84 (2007) 387
3. Boer de M.P., and Mayer T.M. Tribology of MEMS. MRS Bull 26 (2001) 302
4. Sasaki M., and Hirai T. Fabrication and Properties of Functionally Gradient Materials. Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi - J Ceram Soc Jpn 99 (1991) 1002
5. Kesler O., Matejicek J., Sampath S., et al. Measurement of residual stress in plasma-sprayed metallic, ceramic and composite coatings. Mater. Sci. Eng. A. 257 (1998) 215
6. Suresh S. Graded materials for resistance to contact deformation and damage. Science 292 (2001) 2447
7. Giannakopoulos A.E., and Suresh S. Indentation of solids with gradients in elastic properties: 1. Point force. 2. Axisymmetric Indenters. Int J Solids Struct 34 (1997) 2357
8. Suresh S., Giannakopoulos A.E., and Olsson M. Elastoplastic analysis of thermal cycling: layered materials with sharp interfaces. J Mech Phys Solids 42 (1994) 979
9. Jitcharoen J., Padture N.P., Giannakopoulos A.E., and Suresh S. Hertzian-crack suppression in ceramics with elastic-modulus-graded surfaces. J Am Ceram Soc 81 (1998) 2301
10. Suresh S., Olsson M., Giannakopoulos A.E., Padture N.P., and Jitcharoen J. Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces. Acta Mater 47 (1999) 3915
11. Giannakopoulos A.E. Indentation of plastically graded substrates by sharp indentors. Int J Solids Struct 39 (2002) 2495
12. Cao Y.P., and Lu J. A new scheme for computational modeling of conical indentation in plastically graded materials. J Mater Res 19 (2004) 1703
13. Choi I.S., Dao M., and Suresh S. Mechanics of indentation of plastically graded materials. I. Analysis. J Mech Phys Solids 56 (2008) 157
14. Choi I.S., Detor A.J., Schwaiger R., Dao M., Schuh C.A., and Suresh S. Mechanics of Indentation of plastically graded materials: II. Experiment on nnaocrystalline alloys with grain size gradients. J Mech Phys Solids 56 (2008) 172
15. Hall E.O. The Deformation and Ageing of mild steel: III-Discussion of Results. Proc Phy Soc London, Sect B 64 (1951) 747
16. Petch N. The Cleavage Strength of polycrystals. J Iron Steel Ins London 174 (1953) 25
17. Gleiter H. Nanostructured materials. Adv Mater 4 (1992) 474
18. Kumar K.S., Van Swygenhoven H., and Suresh S. Mechanical behavior of nanocrystalline metals and alloys. Acta Mater 51 (2003) 5743
19. Dao M., Lu L., Asaro R.J., De Hosson J.T.M., and Ma E. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals. Acta Mater 55 (2007) 4041
20. Detor A.J., and Schuh C.A. Tailoring and patterning the grain size of nanocrystalline alloys. Acta Mater 55 (2007) 371
21. Pender D.C., Padture N.P., Giannakopoulos A.E., and Suresh S. Gradients in elastic modulus for improved contact-damage resistance. Part I: the silicon nitride-oxynitride glass system. Acta Mater 49 (2001) 3255
22. Bulsara V, Chandrasekar S, Farris NF. Mechanical testing and evaluation, vol. 8: scratch testing, ASM International, 1992.
23. Jacobsson S., Olsson M., Hedenqvist P., and Vingsbo O. (1992), ASM International, Friction, Lubrication, and Wear Technology
24. Williams J. Analytical models of scratch hardness. Tribol Int 29 (1996) 675
25. Bellemare S., Dao M., and Suresh S. The frictional sliding response of elasto-plastic materials in contact with a conical indenter. Int J Solids Struct 44 (2007) 1970
26. Wredenberg F, Larsson PL. On the numerics and correlation of scratch testing. Stockholm, Sweden: Royal Institute of Technology; 2007.
27. Bellemare S., Dao M., and Suresh S. Effects of mechanical properties and surface on elastic-plastic sliding contact. Mech Mater 40 (2008) 206
28. Mohs F. Treatise on minerology [Haidinger W. Trans.]. Edinburgh: Constable; 1825 [Grundriss der mineralogie, Original work published 1824].
29. Brinell J. II Congress Int. d. Methodes d'essai. Iron Steel Inst 59 (1900) 243
30. Meyer E., and Zeits D. Vereines Deutsch. Ingenieure 52 (1908) 645
31. Tabor D. Physical meaning of indentation and scratch hardness. Br J Appl Phys 7 (1956) 159
32. O'Neill H. Hardness measurement of metals and alloys. Chapman & Hall; 1967.
33. Brookes C.A. Scratch and indentation hardness of crystals. Philos Mag A 43 (1981) 529
34. Buttery T., and Archard J. Grinding and abrasive wear. Proc Inst Mech Eng 185 (1971) 537
35. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J Mater Res 7 (1992) 1564
36. Dao M., Chollacoop N., Van Vliet K.J., Venkatesh T.A., and Suresh S. Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater 49 (2001) 3899
37. Gouldstone A., Chollacoop N., Dao M., Li J., and Minor A. Indentation across size scales and disciplines: recent developments in experimentation and modelling. Acta Mater 55 (2007) 4015
38. Hamilton G., and Goodman L. The stress field created by a circular sliding contact. J Appl Mech 33 (1966) 371
39. Challen J.M., and Oxley P.L.B. Slip line field analysis of the transition from local asperity contact to full contact in metallic sliding friction. Wear 100 (1984) 171
40. Mulhearn T.O., and Samuels L.E. Abrasion of metals - model of process. Wear 5 (1962) 478
41. Black A., Kopalinsky E., and Oxley P. An investigation of the different regimes of deformation which can occur when a hard wedge slides over a soft surface. the influence of wedge angle, lubrication and prior plastic working of the surface. Wear 123 (1988) 97
42. Torrance A.A. Approximate model of abrasive cutting. Wear 118 (1987) 217
43. Scrutton R., and Yousef N. Action of the build-up when scraping with rough conical tools. Wear 15 (1970) 411
44. Childs T.H.C., and Walters M.H. On the approximate numerical analysis of slip-line fields. Int J Mech Sci 27 (1985) 823
45. Gilormini P., and Felder E. Theoretical and experimental study of the ploughing of a rigid-plastic semi-infinite body by a rigid pyramidal indenter. Wear 88 (1983) 195
46. Williams J., and Xie Y. The generation of wear surfaces. J Phys D Appl Phys 25 (1992) A158
47. Bowden F., and Tabor D. The friction and lubrication of solids (1986), Clarendon Press
48. Tabor D. The hardness of solids. Rev Phys Technol 1 (1970) 145
49. Goddard J., and Wilman H. A theory of friction and wear during the abrasion of metals. Wear 5 (1962) 114
50. Johnson K.L. Correlation of indentation experiments. J Mech Phys Solids 18 (1970) 115
51. Bishop R., Hill R., and Mott N. The theory of indentation and hardness. Proc Roy Soc 57 (1945) 147
52. Marsh D. Plastic flow in glass. Proc Roy Soc Lond A Math Phys Sci 279 (1964) 420
53. Hirst W., and Howse M. The indentation of materials by wedges. Proc Roy Soc Lond A Math Phys Sci 311 (1969) 429
54. Felder E., and Bucaille J.L. Mechanical analysis of the scratching of metals and polymers with conical indenters at moderate and large strains. Tribol Int 39 (2006) 70
55. Bucaille J.L., Felder E., and Hochstetter G. Mechanical analysis of the scratch test on elastic and perfectly plastic materials with the three-dimensional finite element modeling. Wear 249 (2001) 422
56. Subhash G., and Zhang W. Investigation of the overall friction coefficient in single-pass scratch test. Wear 252 (2002) 123
57. Johnson K.L. Contact mechanics (1985), Cambridge University Press, London
58. Bolshakov A., and Pharr G. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J Mater Res 13 (1998) 1049
59. Cheng Y.T., and Cheng C.M. Scaling, dimensional analysis, and indentation measurements. Mater Sci Eng R Rep 44 (2004) 91
60. Stilwell N., and Tabor D. Elastic recovery of conical indentations. Proc Phys Soc 78 (1961) 169
61. Prasad A. Sliding contact at plastically graded surfaces and applications to surface design. PhD Thesis. Department of Civil and Environmental Engineering, Massachusetts Institute of Technology; 2007.
62. Giannakopoulos A.E., Lindley T.C., and Suresh S. Aspects of equivalence between contact mechanics and fracture mechanics: theoretical connections and a life-prediction methodology for fretting fatigue. Acta Mater 46 (1998) 2955