Mechanics of indentation of plastically graded materials-I: Analysis

Journal of the Mechanics and Physics of Solids

Volumn 56, Issue 1, 2008, Pages 157-171

  Choi, I S ^a   Dao, M ^a   Suresh, S ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

Author keywords

Finite Element Method; Hardness; Indentation; Pile up; Plastically graded materials

Indexed keywords

FINITE ELEMENT METHOD; HARDNESS; INDENTATION; NICKEL ALLOYS; PLASTIC DEFORMATION; PLASTICITY; YIELD STRESS;

DEPTH-SENSING INDENTATION; NANOCRYSTALLINE GRAIN SIZE; PILE-UP; PLASTIC STRAIN DISTRIBUTIONS; PLASTICALLY GRADED MATERIALS;

FUNCTIONALLY GRADED MATERIALS;

EID: 37849045941     PISSN: 00225096     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmps.2007.07.007     Document Type: Article

References (38)

1. Bolshakov A., and Pharr G.M. Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J. Mater. Res. 13 4 (1998) 1049-1058
2. Cao Y.P., and Huber N. Further investigation on the definition of the representative strain in conical indentation. J. Mater. Res. 21 7 (2006) 1810-1821
3. Cao Y.P., and Lu J. A new scheme for computational modeling of conical indentation in plastically graded materials. J. Mater. Res. 19 6 (2004) 1703-1716
4. Cao Y.P., Qian X.Q., Lu J., and Yao Z.H. An energy-based method to extract plastic properties of metal materials from conical indentation tests. J. Mater. Res. 20 5 (2005) 1194-1206
5. Chamberlin R.V., Mozurkewich G., and Orbach R. Time decay of the remanent magnetization in spin-glasses. Phys. Rev. Lett. 52 10 (1984) 867-870
6. Cheng Y.-T., and Cheng C.-M. Scaling approach to conical indentation in elastic-plastic solids with work hardening. J. Appl. Phys. 84 3 (1998) 1284
7. Cheng Y.T., and Cheng C.M. Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng. R 44 4-5 (2004) 91-149
8. Cheng Y.-T., Page T., Pharr G.M., Swain M.V., and Wahl K.J.E. Special focus issue: fundamentals and applications of instrumented indentation in multidisciplinary research. J. Mater. Res. 19 1 (2004)
9. Choi, I.S., Detor, A.J., Schwaiger, R., Dao, M., Schuh, C.A., Suresh, S., 2007. Indentation of plastically graded materials: II. Experiments on nanocrystalline alloys with grain-size Gradients. J. Mech. Phys. Solids, in press, doi:10.1016/j.jmps.2007.07.006.
10. Chollacoop N., Dao M., and Suresh S. Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51 13 (2003) 3713-3729
11. Dao M., Chollacoop N., Van Vliet K.J., Venkatesh T.A., and Suresh S. Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49 19 (2001) 3899-3918
12. Fischer-Cripps A.C. Introduction to Contact Mechanics (2000), Springer-Verlag, New York
13. Freund L.B., and Suresh S. Thin Film Materials: Stress, Defect Formation and Surface Evolution (2003), Cambridge University Press, Cambridge, UK
14. Gerberich W.W., Nelson J.C., Lilleodden E.T., Anderson P., and Wyrobek J.T. Indentation induced dislocation nucleation: the initial yield point. Acta Mater. 44 9 (1996) 3585-3598
15. Giannakopoulos A.E. Indentation of plastically graded substrates by sharp indentors. Int. J. Solids Struct. 39 9 (2002) 2495-2515
16. Giannakopoulos A.E., and Suresh S. Indentation of solids with gradients in elastic properties .2. Axisymmetric indenters. Int. J. Solids Struct. 34 24 (1997) 2393
17. Gouldstone A., Van Vliet K.J., and Suresh S. Nanoindentation-simulation of defect nucleation in a crystal. Nature 411 6838 (2001) 656
18. Gouldstone A., Chollacoop N., Dao M., Li J., Minor A.M., and Shen Y.-L. Overview: indentation across size scales and disciplines: recent developments in experimentation and modeling. Acta Mater. 55 12 (2007) 4015-4039
19. Gu Y., Nakamura T., Prchlik L., Sampath S., and Wallace J. Micro-indentation and inverse analysis to characterize elastic-plastic graded materials. Mater. Sci. Eng. A 345 1-2 (2003) 223-233
20. Hirai, T., 1996. In: R.J. Brook (Ed.), Materials Science and Technology: A Comprehensive Treatment, Vol. 17B, Part 2. VCH, Weinheim, Germany, pp. 293-341.
21. Jitcharoen J., Padture N.P., Giannakopoulos A.E., and Suresh S. Hertzian-crack suppression in ceramics with elastic-modulus-graded surfaces. J. Am. Ceram. Soc. 81 9 (1998) 2301-2308
22. Johnson K.L. Contact Mechanics (1985), Cambridge University Press, London
23. Kakalios J., Street R.A., and Jackson W.B. Stretched-exponential relaxation arising from dispersive diffusion of hydrogen in amorphous-silicon. Phys. Rev. Lett. 59 9 (1987) 1037-1040
24. Malacarne L.C., Mendes R.S., Pedron I.T., and Lenzi E.K. Nonlinear equation for anomalous diffusion: unified power-law and stretched exponential exact solution. Phys. Rev. E 6303 3 (2001)
25. Malacarne L.C., Mendes R.S., and Lenzi E.K. q-exponential distribution in urban agglomeration. Phys. Rev. E 65 1 (2002)
26. Nakamura T., Wang T., and Sampath S. Determination of properties of graded materials by inverse analysis and instrumented indentation. Acta Mater. 48 17 (2000) 4293-4306
27. Ogasawara N., Chiba N., and Chen X. Representative strain of indentation analysis. J. Mater. Res. 20 8 (2005) 2225-2234
28. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7 6 (1992) 1564-1583
29. Oliver W.C., and Pharr G.M. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J. Mater. Res. 19 1 (2004) 3-20
30. Picoli S., Mendes R.S., and Malacarne L.C. q-exponential, Weibull, and q-Weibull distributions: an empirical analysis. Physica A-Statist. Mech. Appl. 324 3-4 (2003) 678-688
31. Smith C.S. A History of Metallography (1960), MIT Press, Cambridge, MA, USA pp. 3-5
32. Suresh S. Graded materials for resistance to contact deformation and damage. Science 292 5526 (2001) 2447-2451
33. Suresh S. Crystal deformation: colloid model for atoms. Nat. Mater. 5 4 (2006) 253-254
34. Suresh S., and Mortensen A. Fundamentals of Functionally Graded Materials (1998), Institute of Materials, London
35. Suresh S., Olsson M., Giannakopoulos A.E., Padture N.P., and Jitcharoen J. Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces. Acta Mater. 47 14 (1999) 3915-3926
36. Taylor E.S. Dimensional Analysis for Engineers (1974), Clarendon Press, Oxford, UK
37. Wang L., and Rokhlin S.I. Universal scaling functions for continuous stiffness nanoindentation with sharp indenters. Int. J. Solids Struct. 42 13 (2005) 3807-3832
38. Williams G. Non-sysmmetrical dielectric relaxation behaviour arising from a simple empirical decay function. Trans. Faraday Soc. 66 (1970) 80