Microendmill dynamics including the actual fluted geometry and setup errors - Part II: Model validation and application

Journal of Manufacturing Science and Engineering

Volumn 130, Issue 3, 2008, Pages 0311201-03112013

  Filiz, Sinan ^a   Ozdoganlar, O Burak ^a  

^a CARNEGIE MELLON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

NATURAL FREQUENCIES;

DIFFERENT GEOMETRY; DYNAMIC EXCITATIONS; FREE BOUNDARY CONDITIONS; GEOMETRIC SIMPLIFICATION; LASER DOPPLER VIBROMETERS; MICRO-ENDMILL DYNAMICS; NATURAL FREQUENCIES AND MODES; PIEZOELECTRIC ELEMENTS;

GEOMETRY;

EID: 49849106168     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2936379     Document Type: Article

References (24)

1. Erturk, A., Ozguven, H. N., and Budak, E., 2006, "Analytical Modeling of Spindle-Tool Dynamics on Machine Tools Using Timoshenko Beam Model and Receptance Coupling for the Prediction of Tool Point FRF," Int. J. Mach. Tools Manuf., 46, pp. 1901-1912.
2. Lee, S. W., Mayor, R., and Ni, J., 2006, "Dynamic Analysis of a Mesoscale Machine Tool," ASME J. Manuf. Sci. Eng., 128, pp. 194-203.
3. Jackson, M. E., Hyde, L. J., Robinson, G. M., and Ahmet, W., 2006, "Dynamic Response of a Tetrahedral Nanomachining Machine Tool Structure," International Journal of Nanomanufacturing, 1(1), pp. 26-46.
4. Schmitz, T. L., and Duncan, G. S., 2005, "Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction," ASME J. Manuf. Sci. Eng., 127, pp. 781-790.
5. Duncan, G. S., Tummond, M. F., and Schmitz, T. L., 2005, "An Investigation of the Dynamic Absorber Effect in High-Speed Machining," Int. J. Mach. Tools Manuf., 45, pp. 497-507.
6. Mascardelli, B. A., Park, S. S., and Freiheit, T., 2006, "Substructure Coupling of Micro-End Mills," Proceedings of IMECE 2006 (13129), Chicago, IL, pp. 145-150.
7. Filiz, S., Cheng, C., Powell, K. B., Schmitz, T. L., and Ozdoganlar, O. B., 2008, "An Improved Tool-Holder Model for RCSA Tool-Point Frequency Response Prediction," Precision Engineering - J. the Int. Soc. Prec. Eng. and Nanotech., in press.
8. Chou, Y. F., and Wang, L. C., 2001, "On the Modal Testing of Microstructures: Its Theoretical Approach and Experimental Setup," ASME J. Vibr. Acoust., 123, pp. 104-109.
9. Schmitz, T. L., Davies, M. A., Medicus, K., and Snyder, J., 2001, "Improving High-Speed Machining Material Removal Rates by Rapid Dynamic Analysis," CIRP Ann., 50(1), pp. 263-268.
10. Montalvao, J. M., Silva, E., and Araujo Gomes, A. J. M., 1990, "Experimental Dynamic Analysis of Cracked Free-Free Beams," Experimental Mechanics, 30(1), pp. 20-25.
11. Jun, M. B. G., Liu, X., Devor, R. E., and Kapoor, S. G., 2006, "Investigation of the Dynamics of Microend Milling-Part II: Model Validation and Interpretation," ASME J. Manuf. Sci. Eng., 128, pp. 901-912.
12. Jun, M. B., Kapoor, S. G., and Devor, R. E., 2004, "The Effects of End Mill Alignment Errors on Vibrations at High Spindle Speeds," Trans. NAMRI/SME, 32, pp. 9-16.
13. Gupta, K., Ozdoganlar, O. B., Kapoor, S. G., and Devor, R. E., 2003, "Modeling and Prediction of Hole Profile In Drilling, Part 1: Modeling Drill Dynamics in the Presence of Drill Alignment Errors," ASME J. Manuf. Sci. Eng., 125, pp. 14-20.
14. Gong, Y., Lin, C., and Ehmann, K. F., 2005, "Dynamics of Initial Penetration in Drilling: Part 2. Motion Models for Drill Skidding and Wandering With Experimental Verification," ASME J. Manuf. Sci. Eng., 127, pp. 289-297.
15. Kivanc, E. B., and Budak, E., 2003, "Development of Analytical Endmill Deflection And Dynamic Models," Proceedings of IMECE 2003 (42301), Washington, DC, pp. 1-10.
16. Liu, X., Jun, M. B. G., Devor, R. E., and Kapoor, S. G., 2004, "Cutting Mechanisms and Their Influence on Dynamic Forces, Vibrations and Stability in Micro-Endmilling," Proceedings of IMECE, pp. 583-592.
17. Altintas, Y. Montgomery, D., and Budak, E., 1992, "Dynamic Peripheral Milling of Flexible Structures." ASME J. Eng. Ind., 114, pp. 137-145.
18. Ema, S., Fujii, H., and Marui, E., 1988, "Whirling Vibration in Drilling. Part 3: Vibration Analysis in Drilling Workpiece With a Pilot Hole," ASME J. Eng. Ind., 110(4), pp. 315-321.
19. Ismail, F., Elbestawi, M. A., Du, R., and Urbasik, K., 1993, "Generation of Milled Surfaces Including Tool Dynamics and Wear," ASME J. Eng. Ind., 115, pp. 245-252.
20. Zhang, P. Q., Tang, X. L., Shan, B. X., Brandon, J. A., and Kwan, A. S. K., 1998, "Analytical and Experimental Modal Analysis for Operational Validation and Calibration of a Miniature Silicon Sensor," J. Sound Vib., 214(5), pp. 903-913.
21. Polla, D. L., and Francis. L. F., 1998, "Processing and Characterization of Piezoelectric Materials and Integration Into Microelectromechanical Systems," Annu. Rev. Mater. Sci., 28, pp. 563-597.
22. Ozdoganlar, O. B., Hansche, B. D., and Carne, T. G., 2005, "Experimental Modal Analysis for Microelectromechanical Systems," Experimental Mechanics, 45(6), pp. 498-506.
23. Lawrence, E. M., Rembe, C. Boedecker, S., and Zhang, H., 2006, "The Ultra Fine Dynamics of MEMS as Revealed by the Polytec Micro System Analyzer," Proc. SPIE, 6111, 61110L.
24. Tulsian, A., Wasserman, M. B., and Ozdoganlar, O. B., 2007, "Measurement of Dynamic Runout Characteristics of Ultra-High-Speed Miniature Spindles for Micromachining," International Conference on Micro Manufacturing, Sept. 11-13, Greenville, South Carolina.