Influence of airborne-particle abrasion on mechanical properties and bond strength of carbon/epoxy and glass/bis-gma fiber-reinforced resin posts

Journal of Prosthetic Dentistry

Volumn 99, Issue 6, 2008, Pages 444-454

  Soares, Carlos Jose ^a   Santana, Fernanda Ribeiro ^a   Pereira, Janaina Carla ^a   Araujo, Tatiana Santos ^a   Menezes, Murilo Souza ^a  

^a FEDERAL UNIVERSITY OF UBERLÂNDIA   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM OXIDE; BIOMEDICAL AND DENTAL MATERIALS; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CARBON; CARBON FIBER; EPOXY RESIN; FILTEK Z250; GLASS; GLASS FIBER; MACROGOL DERIVATIVE; POLYMETHACRYLIC ACID DERIVATIVE; RELYX ARC; RESIN; RESIN CEMENT; SILANE DERIVATIVE;

ADHESION; ARTICLE; BIOMECHANICS; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL ETCHING; ELASTICITY; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PLIABILITY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TENSILE STRENGTH; TOOTH CROWN;

ADHESIVENESS; ALUMINUM OXIDE; BIOMECHANICS; BISPHENOL A-GLYCIDYL METHACRYLATE; CARBON; COMPOSITE RESINS; DENTAL BONDING; DENTAL ETCHING; DENTAL MATERIALS; ELASTICITY; EPOXY RESINS; GLASS; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; POST AND CORE TECHNIQUE; RESIN CEMENTS; SILANES; STRESS, MECHANICAL; SURFACE PROPERTIES; TENSILE STRENGTH;

EID: 44349168808     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(08)60106-7     Document Type: Article

References (44)

1. Kalkan M., Usumez A., Ozturk A., Belli S., and Eskitascioglu G. Bond strength between root dentin and three glass-fiber post systems. J Prosthet Dent 96 (2006) 41-46
2. Glazer B. Restoration of endodontically treated teeth with carbon fibre posts-a prospective study. J Can Dent Assoc 66 (2000) 613-618
3. Monticelli F., Grandini S., Goracci C., and Ferrari M. Clinical behavior of translucent-fiber posts: a 2-year prospective study. Int J Prosthodont 16 (2003) 593-596
4. Malferrari S., Monaco C., and Scotti R. Clinical evaluation of teeth restored with quartz fiber-reinforced epoxy resin posts. Int J Prosthodont 16 (2003) 39-44
5. Balbosh A., and Kern M. Effect of surface treatment on retention of glass-fiber endodontic posts. J Prosthet Dent 95 (2006) 218-223
6. Sorensen J., and Martinoff J. Clinically significant factors in dowel design. J Prosthet Dent 52 (1984) 28-35
7. Segerstrom S., Astback J., and Ekstrand K. A retrospective long term study of teeth restored with prefabricated carbon fiber reinforced epoxy resin posts. Swed Dent J 30 (2006) 1-8
8. Silness J., Gustavsen F., and Hunsbeth J. Distribution of corrosion products in teeth restored with metal crowns retained by stainless steel posts. Acta Odontol Scand 37 (1979) 317-321
9. de Rijk W. Removal of fiber posts from endodontically treated teeth. Am J Dent 13 (2000) 19B-21B
10. Gesi A., Magnolfi S., Goracci C., and Ferrari M. Comparison of two techniques for removing fiber posts. J Endod 29 (2003) 580-582
11. Ferrari M., Vichi A., and Garcia-Godoy F. Clinical evaluation of fiber-reinforced epoxy resin posts and cast post and cores. Am J Dent 13 (2000) 15B-18B
12. Schwartz R., and Robbins J. Post placement and restoration of endodontically treated teeth: a literature review. J Endod 30 (2004) 289-301
13. Grandini S., Goracci C., Monticelli F., Tay F., and Ferrari M. Fatigue resistance and structural characteristics of fiber posts: three-point bending test and SEM evaluation. Dent Mater 21 (2005) 75-82
14. Lassila L., Tanner J., Le Bell A., Narva K., and Vallittu P. Flexural properties of fiber reinforced root canal posts. Dent Mater 20 (2004) 29-36
15. Seefeld F., Wenz H., Ludwig K., and Kern M. Resistance to fracture and structural characteristics of different fiber reinforced post systems. Dent Mater 23 (2007) 265-271
16. Goldberg A., and Burstone C. The use of continuous fiber reinforcement in dentistry. Dent Mater 8 (1992) 197-202
17. Hull D., and Clyne T. An introduction to composite materials. 2nd ed. (1996), Cambridge University Press, Cambridge 9-36
18. Ferrari M., Vichi A., Mannocci F., and Mason P. Retrospective study of the clinical performance of fiber posts. Am J Dent 13 (2000) 9B-13B
19. Lassila L., and Vallitu P. The effect of fiber position and polymerization condition on the flexural properties of fiber-reinforced composite. J Contemp Dent Pract 5 (2004) 14-26
20. Drummond J., and Bapna M. Static and cyclic loading of fiber-reinforced dental resin. Dent Mater 19 (2003) 226-231
21. Eick J., Smith R., Pinzino C., Kotha S., Kostoryz E., and Chappelow C. Photopolymerization of developmental monomers for dental cationically initiated matrix resins. Dent Mat 21 (2005) 384-390
22. Grandini S., Balleri P., and Ferrari M. Scanning electron microscopic investigation of the surface of fiber posts after cutting. J Endod 28 (2002) 610-612
23. Baran G., Boberick K., and McCool J. Fatigue of restorative materials. Crit Rev Oral Biol Med 12 (2001) 350-360
24. Cohen B., Pagnillo M., Newman I., Musikant B., and Deutsch A. Cyclic fatigue testing of five endodontic post designs supported by four core materials. J Prosthet Dent 78 (1997) 458-464
25. Gateau P., Sabek M., and Dailey B. Fatigue testing and microscopic evaluation of post and core restorations under artificial crowns. J Prosthet Dent 82 (1999) 341-347
26. Reagan S., Fruits T., Van Brunt C., and Ward C. Effects of cyclic loading on selected post-and-core systems. Quintessence Int 30 (1999) 61-67
27. Mannocci F., Ferrari M., and Watson T. Intermittent loading of teeth restored using quartz fiber, carbon-quartz fiber, and zirconium dioxide ceramic root canal posts. J Adhes Dent 1 (1999) 153-158
28. Asmussen E., Peutzfeldt A., and Heitmann T. Stiffness, elastic limit, and strength of newer types of endodontic posts. J Dent 27 (1999) 275-278
29. Lanza A., Aversa R., Rengo S., Apicella D., and Apicella A. 3D FEA of cemented steel, glass and carbon posts in a maxillary incisor. Dent Mater 21 (2005) 709-715
30. Sahafi A., Peutzfeldt A., Asmussen E., and Gotfredsen K. Effect of surface treatment of prefabricated posts on bonding of resin cement. Oper Dent 29 (2004) 60-68
31. Katebzadeh N., Dalton B., and Trope M. Strengthening immature teeth during and after apexification. J Endod 24 (1998) 256-259
32. Goracci C., Raffaelli O., Monticelli F., Balleri P., Bertelli E., and Ferrari M. The adhesion between prefabricated FRC posts and composite resin cores: microtensile bond strength with and without post-silanization. Dent Mat 21 (2005) 437-444
33. Perdigao J., Gomes G., and Lee I. The effect of silane on the bond strengths of fiber posts. Dent Mater 22 (2006) 752-758
34. Aksornmuang J., Foxton R., Nakajima M., and Tagami J. Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre posts. J Dent 32 (2004) 443-450
35. Matinlinna J., Lassila L., Ozcan M., Yli-Urpo A., and Vallittu P. An introduction to silanes and their clinical applications in dentistry. Int J Prosthodont 17 (2004) 155-164
36. Park S., and Jin J. Effect of silane coupling agent on interphase and performance of glass fibers/unsaturated polyester composites. J Colloid Interface Sci 242 (2001) 174-179
37. Sahafi A., Peutzfeldt A., Asmussen E., and Gotfredsen K. Bond strength of resin cement to dentin and to surface-treated posts of titanium alloy, glass fiber, and zirconia. J Adhes Dent 5 (2003) 153-162
38. Monticelli F., Toledano M., Tay F., Sadek F., Goracci C., and Ferrari M. A simple etching technique for improving the retention of fiber posts to resin composites. J Endod 32 (2006) 44-47
39. Monticelli F., Osorio R., Toledano M., Goracci C., Tay F., and Ferrari M. Improving the quality of the quartz fiber postcore bond using sodium ethoxide etching and combined silane/adhesive coupling. J Endod 32 (2006) 447-451
40. Monticelli F., Toledano M., Osorio R., and Ferrari M. Effect of temperature on the silane coupling agents when bonding core resin to quartz fiber posts. Dent Mater 22 (2006) 1024-1028
41. International Standardization Organization, ISO 10477-2004. Dentistry - Polymer-based crown and bridge materials (2004), ISO, Geneva. Available at http://www.iso.ch/iso/en/prods-services/ISOstore/store.html
42. Torbjorner A., Karlsson S., Syverud M., and Hensten-Pettersen A. Carbon fiber-reinforced root canal posts. Mechanical and cytotoxic properties. Eur J Oral Sci 104 (1996) 605-611
43. Mannocci F., Sherriff M., and Watson T. Three-point bending test of fiber posts. J Endod 27 (2001) 758-761
44. Plotino G., Grande N., Bedini R., Pameijer C., and Somma F. Flexural properties of endodontic posts and human root dentin. Dent Mat 23 (2007) 1129-1135