Tolerance analysis for design of multistage manufacturing processes using number-theoretical net method (NT-net)

International Journal of Flexible Manufacturing Systems

Volumn 16, Issue 1, 2004, Pages 65-90

  Huang, Wenzhen ^a   Ceglarek, Dariusz ^a   Zhou, Zhige ^b  

^a University of Wisconsin Madison   (United States)

^b HEBEI UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Monte Carlo simulation; Tolerance analysis

Indexed keywords

MULTISTAGE MANUFACTURING; PROCESS VARIATION; TOLERANCE ANALYSIS; VARIATION PREDICTION MODELS;

COMPUTER SIMULATION; FITS AND TOLERANCES; INTEGRATED CIRCUITS; MATHEMATICAL MODELS; MONTE CARLO METHODS; THEOREM PROVING; VECTORS;

FLEXIBLE MANUFACTURING SYSTEMS;

EID: 4344704616     PISSN: 09206299     EISSN: None     Source Type: Journal    
DOI: 10.1023/B:FLEX.0000039173.07009.8a     Document Type: Article

References (45)

1. Apley, D. W. and Shi, J. J., "A Factor-Analysis Method for Diagnosing Variability in Multivariate Manufacturing Processes," Technometrics, Vol. 43, No. 1, pp. 84-95 (2001).
2. Ashiagobor, A., Liu, H.-C., and Nnaji, B. O., "Tolerance Control and Propagation for the Product Assembly Modeler," International Journal of Production Research, Vol. 36, pp. 75-93 (1998).
3. Camelio, J., Hu, S. J., and Ceglarek, D., "Modeling Variation Propagation of Multi-Station Assembly Systems with Compliant Parts," Transactions of ASME, Journal of Mechanical Design, Vol. 125, No. 4, pp. 673-681 (2003).
4. Ceglarek, D. and Shi, J., "Dimensional Variation Reduction for Automotive Body Assembly Manufacturing," Manufacturing Review, Vol. 8, No. 2, pp. 139-154 (1995).
5. Ceglarek, D. and Shi, J., "Fixture Failure Diagnosis for the Autobody Assembly Using Pattern Recognition," Transactions of ASME, Journal of Engineering for Industry, Vol. 118, No. 1, pp. 55-66 (1996).
6. Ceglarek, D., Shi, J., and Wu, S. M., "A Knowledge-Based Diagnosis Approach for the Launch of the Auto-Body Assembly Process," Transactions of ASME, Journal of Engineering for Industry, Vol. 116, No. 4, pp. 491-499 (1994).
7. Ceglarek, D. and Shi, J., "Design Evaluation of Sheet Metal Joints for Dimensional Integrity," ASME Transactions, Journal of Manufacturing Science & Engineering, Vol. 120, No. 2, pp. 452-460 (1998).
8. Chase, K. W. and Parkinson, A. R., "A Survey of Research in the Application of Tolerance Analysis to the Design of Mechanical Assemblies," Research in Engineering Design, Vol. 3, pp. 23-37 (1991).
9. Ding, Y., Ceglarek, D., and Shi, J., "Modeling and Diagnosis of Multistage Manufacturing Processes: Part I - State Space Model," Japan/USA Symposium on Flexible Automation 2000 (2000a).
10. Ding, Y., Ceglarek, D., Jin, J., and Shi, J., "Process-Oriented Tolerance Synthesis for Multistage Manufacturing Systems," Manufacturing Science and Engineering-2000, ASME 2000, MED-Vol. 11 (2000b).
11. Ding, Y., Ceglarek, D., and Shi, J., "Fault Diagnosis of Multistage Manufacturing Processes by Using State Space Approach," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 124, No. 2, pp. 313-322 (2002a).
12. Ding, Y., Ceglarek, D., and Shi, J., "Design Evaluation of Multi-Station Assembly Processes by Using State Space Approach," Transactions of ASME, Journal of Mechanical Design, Vol. 124, No. 3, pp. 408-418 (2002b).
13. Ding, Y., Shi, J., and Ceglarek, D., "Diagnosability Analysis of Multistage Manufacturing Processes," ASME Transactions, Journal of Dynamic Systems, Measurement, and Control, Vol. 124, No. 1, pp. 1-13 (2002c).
14. Fang, K. T. and Wang, Y., Number-Theoretical Methods in Statistics, Chapman & Hall, London (1994).
15. Fortini, E., Dimensioning for Interchangeable Manufacture, Industrial Press (1967).
16. Gibson, D. S., Poddar, R., and May, G. S., "Statistically Based Parametric Yield Prediction for Integrated Circuits," IEEE Transactions on Semiconductor Manufacturing, Vol. 10, No. 4, pp. 445-458 (1997).
17. Gyvez, J. P. and Di, C., "IC Defect Sensitivity for Footprint Type Spot Defects," IEEE Transactions on Computer-Aided Design, Vol. 11, No. 5, pp. 638-658 (1992).
18. Gyvez, J. P. (Ed.), IC Manufacturabilily: The Art of Process and Design Integration, IEEE Computer Society Press (1998).
19. Hocevar, D. E., Lightner, M. R., and Trick, T. N., "A Study of Variation Reduction Techniques for Estimating Circuit Yields," IEEE Transactions Computer-Aided Design, Vol. CAD-2, No. 3, pp. 180-192 (1983).
20. Hu, S. J., "Stream of Variation Theory for Automotive Body Assemblies," Annuals of CIRP, Vol. 46, No. 1, pp. 1-6 (1997).
21. Huang, W. and Ceglarek, D., "Mode-Based Decomposition of Part Form Error by Discrete-Cosine-Transform with Implementation to Assembly and Stamping System with Compliant Parts," Annals of the CIRP, Vol. 51, No. 1, pp. 21-26 (2002).
22. Jin, J. and Shi, J., "State Space Modeling of Sheet Metal Assembly for Dimensional Control," ASME Transactions, Journal of Manufacturing Science & Engineering, Vol. 121, No. 4, pp. 756-762 (1999).
23. Kiefer, J., "On Large Deviations of the Empiric d.f. of Vector Chance Variables and a Law of the Iterated Logarithm," Pacific Journal Mathematics, Vol. 11, pp. 649-660 (1961).
24. Koren, I. and Koren, Z., "Defect Tolerance in VLSI Circuits: Techniques and Yield Analysis," Proceedings of the IEEE, Vol. 86, No. 9, pp. 1817-1836 (1998).
25. Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G.A., and Brussel, H., "Reconfigurable Manufacturing Systems," Annals of CIRP, Vol. 50, No. 2 (1999).
26. Lee, W.-J. and Woo, T. C., "Optimum Selection of Discrete Tolerances," ASME Transactions, Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 111, pp. 243-251 (1989).
27. Lee, W.-J. and Woo, T. C., "Tolerances: Their Analysis and Synthesis," ASME Transactions, Journal of Engineering for Industry, Vol. 112, pp. 113-121 (1990).
28. Lee, J. and Johnson, G., "Optimal Tolerance Allotment Using a Genetic Algorithm and Truncated Monte Carlo Simulation," Computer-Aided Design, Vol. 25, No. 9, pp. 601-611 (1993).
29. Liu, S. C., Hu, S. J., and Woo, T. C., "Tolerance Analysis for Sheet Metal Assemblies," ASME Transactions, Journal of Mechanical Design, Vol. 118, pp. 62-67 (1996).
30. Luigi, P., "Monte Carlo simulation of Semiconductor Device and Process Modeling: Critical Review," IEEE Transactions CAD, Vol. CAD-9, pp. 1164-1176 (1990).
31. Mantripragada, R. and Whitney, D. E., "Modeling and Controlling Variation Propagation in Mechanical Assemblies Using State Transition Models," IEEE Transactions on Robotics and Automation, Vol. 15, No. 1, pp. 124-140 (1999).
32. NSF-ERC National Science Foundation-Engineering Research Center for Reconfigurable Manufacturing Systems (ERC-RMS) Technical Report, University of Michigan (1999).
33. Nigam S. D. and Turner J. U., "Review of Statistical Approaches to Tolerance Analysis," Computer-Aided Design, Vol. 27, No. 1, pp. 6-15 (1995).
34. Rong, Q., Ceglarek, D., and Shi, J., "Dimensional Fault Diagnosis for Compliant Beam Structure Assemblies," Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 773-780 (2000).
35. Shalon, D., Gossard, D., Ulrich, K., and Fitzpatrick, D., "Representing Geometric Variations in Complex Structural Assemblies on CAD Systems," Advances in Design Automation, Vol. 2, pp. 121-132 (1992).
36. Shiu, B. W., Apley, D., Ceglarek, D., and Shi, J., "Tolerance Allocation for Sheet Metal Assembly using Beam-Based Model," Transactions of IIE, Design and Manufacturing, Vol. 35, No. 4, pp. 329-342 (2003).
37. Skowronski, V. J. and Turner, J. U., "Using Monte Carlo Variance Reduction in Statistical Tolerance Synthesis," Computer-Aided Design, Vol. 29, pp. 63-69 (1997).
38. Spence, R. and Soin, R. S., Tolerance Design of Electronic Circuits, Imperial College Press (1997).
39. Voelcker, H. B., "The Current State of Affairs in Dimensional Tolerancing," Integrated Manufacturing System, Vol. 9, No. 4, pp. 205-217 (1998).
40. Wagner, I. A. and I. Koren, "An Interactive VLSI CAD Tool for Yield Estimation," IEEE Transactions on Semiconductor Manufacturing, Vol. 8, pp. 130-138 (1995).
41. Whitney, D. E., Gilbert, O. L., and Jastrzebski, M., "Representation of Geometric Variations Using Matrix Transforms for Statistical Tolerance Analysis in Assemblies," Research in Engineering Design, Vol. 6, No. 4, pp. 191-210 (1994).
42. Wu, Z., ElMaraghy, W. H., and ElMaraghy, H. A., "Evaluation of Cost-Tolerance Algorithms for Design Tolerance Analysis and Synthesis," Manufacturing Review, Vol. 1, No. 3, pp. 168-179 (1988).
43. Zhang, C. and Wang, H. P., "Robust Design of Assembly and Machining Tolerance Allocations," IIE Transactions, Vol. 30, pp. 17-29 (1998).
44. Zhou S. Y., Ding Y., Chen Y., and Shi J. J., "Diagnosability Study of Multistage Manufacturing Processes Based on Linear Mixed-Effects Models," Technometrics, Vol. 45, No. 4, pp. 312-325 (2003).
45. Zhou, Z., Huang, W., and Zhang, L., "Sequential Algorithm Based on Number Theoretic Method for Statistical Tolerance Analysis and Synthesis," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 123, No. 3, pp. 490-493 (2001).