Time-based competition in multistage manufacturing: Stream-of-variation analysis (SOVA) methodology - Review

International Journal of Flexible Manufacturing Systems

Volumn 16, Issue 1, 2004, Pages 11-44

  Ceglarek, D ^a   Huang, W ^a   Zhou, S ^a   Ding, Y ^b   Kumar, R ^c   Zhou, Y ^c  

^a University of Wisconsin Madison   (United States)

^b Texas AandM University   (United States)

^c Dimensional Control Systems Inc   (United States)

Author keywords

Manufacturing systems; Quality; Root cause identification; Variation reduction

Indexed keywords

COSTS; ERROR ANALYSIS; LIFE CYCLE; PROCESS CONTROL; PRODUCT DESIGN; PRODUCT DEVELOPMENT; SOCIETIES AND INSTITUTIONS;

MULTISTAGE MANUFACTURING; ROOT CAUSE IDENTIFICATION; STREAM-OF-VARIATION ANALYSIS (SOVA); VARIATION REDUCTION;

FLEXIBLE MANUFACTURING SYSTEMS;

EID: 19244366701     PISSN: 09206299     EISSN: None     Source Type: Journal    
DOI: 10.1023/B:FLEX.0000039171.25141.a4     Document Type: Review

References (43)

1. Apley, D. W. and Shi, J., "Diagnosis of Multiple Fixture Faults in Panel Assembly," ASME Journal of Manufacturing Science and Engineering, Vol 120, pp. 793-801 (1998).
2. Baron, J., "Dimensional Analysis and Process Control of Body-In-White Processes," Ph. D. Dissertation, University of Michigan, Ann Arbor, MI (1992).
3. Bollinger, J. E. (Ed.), Visionary Manufacturing Challenges for 2020, Committee on Visionary Manufacturing Challenges, National Research Council, National Academy Press, Washington, DC (1998).
4. Cai, W., Hu, S. J., and Yuan J. X., "Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations," Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 118, No. 3, pp. 318-324 (1996).
5. Camelio, J., Hu, S. J., and Ceglarek, D., "Modeling Variation Propagation of Multi-Station Assembly Systems with Compliant Parts," Transactions of ASME, Journal of Mechanical Design, Vol. 125, No. 4, pp. 673-681 (2003).
6. Ceglarek, D., "Knowledge-Based Diagnosis for Automotive Body Assembly: Methodology and Implementation," Ph.D. Dissertation, University of Michigan, Ann Arbor, MI (1994).
7. Ceglarek, D. and Shi, J., "Dimensional Variation Reduction for Automotive Body Assembly Manufacturing," Manufacturing Review, Vol. 8, No. 2, pp. 139-154 (1995).
8. Ceglarek, D. and Shi, J., "Fixture Failure Diagnosis for Auto Body Assembly Using Patter Recognition," ASME Transactions, Journal of Engineering for Industry, Vol. 118, No. 1, pp. 55-65 (1996).
9. Ceglarek, D. and Shi, J., "Design Evaluation of Sheet Metal Joints for Dimensional Integrity," Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, pp. 452-460 (1998).
10. Ceglarek, D., Shi, J., and Wu, S. M., "A Knowledge-Based Diagnosis Approach for the Launch of the Auto-Body Assembly Process," Transactions of ASME, Journal of Engineering for Industry, Vol. 116, No. 4, pp. 491-499 (1994).
11. Chase, K. W. and Parkinson, A. R., "A Survey of Research in the Application of Tolerance Analysis to the Design of Mechanical Assemblies," Res. Eng. Design, Vol. 3, pp. 23-37 (1991).
12. CIRP, "Flexible Automation - Assessment and Future," CIRP Scientific Technical Committee Survey in USA, Europe and Japan (January 27, 2000).
13. DCS, 3D Variation Simulation, Dimensional Control Systems, Inc. (2000).
14. Ding, Y., Ceglarek, D., and Shi, J., "Modeling and Diagnosis of Multistage Manufacturing Process: Part I State Space Model," Proceedings of 2000 Japan-USA Symposium on Flexible Automation, July 23-26, Ann Arbor, MI, 2000JUSFA-13146 (2000).
15. Ding, Y., Ceglarek, D., and Shi, J., "Design Evaluation of Multi-station Assembly Processes by Using State Space Approach," ASME Transactions, Journal of Mechanical Design, Vol. 124, No. 3, pp. 408-418 (2002a).
16. Ding, Y., Ceglarek, D., and Shi, J., "Fault Diagnosis of Multistage Manufacturing Processes by Using State Space Approach," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 124, No. 2, pp. 313-322 (2002b).
17. Ding, Y., Shi, J., and Ceglarek, D., "Diagnosability Analysis of Multistage Manufacturing Processes," ASME Transactions, Journal of Dynamic Systems, Measurement, and Control, Vol. 124, No. 1, pp. 1-13 (2002c).
18. Ding, Y., Kim, P., Ceglarek, D., and Jin, J., "Optimal Sensor Distribution for Variation Diagnosis in Multi-Station Manufacturing Processes," IEEE Transactions on Robotics and Automation, Vol. 19, No. 4, pp. 543-556 (2003).
19. El-Gizawy, A. S., Hwang, J.-Y., and Brewer, D. H., "A Strategy for Integrating Product and Process Design of Aerospace Components," Manufacturing Review, Vol. 3, No. 3, pp. 178-186 (1990).
20. ERC-RMS, National Science Foundation-Engineering Research Center for Reconfigurable Manufacturing Systems (ERC-RMS), Technical Report, University of Michigan (1999).
21. Gadh, R., "A Hybrid Approach to Intelligent Geometric Design Using Features-Based Design and Feature Recognition," Proceedings of the 19th Annual ASME Design Automation Conference, Vol. DE-65, No. 2, pp. 273-283 (1993).
22. Gerwin, D. and Barrowman, N. J., "An Evaluation of Research on Integrated Product Development," Management Science, Vol. 48, No. 7, pp. 938-953 (2002).
23. Greer, D., "On-line Machine Vision Sensor Measurements in a Coordinate System," SME Paper #IQ88-289 (1988).
24. Hu, S. J., "Impact of 100% Measurement Data on Statistical Process Control (SPC) in Automobile Body Assembly," Ph.D. Dissertation, University of Michigan, Ann Arbor, MI (1990).
25. Hu, S. J., "Stream-of-Variation Theory for Automotive Body Assemblies," Annals of CIRP, Vol. 46, No. 1, pp. 1-6 (1997).
26. Hu, S. and Wu, S. M., "Identifying Root Causes of Variation in Automobile Body Assembly Using Principal Component Analysis," Transactions of NAMRI, Vol. 20, pp. 311-316 (1992).
27. Huang, W., Kong, Z., Ceglarek, D., and Brahmst, E., "The Analysis of Feature-Based Measurement Error in Coordinate Metrology," IIE Transactions on Design and Manufacturing, Vol. 36, No. 3, pp. 237-251 (2004).
28. Jin, J. and Shi, J., "State Space Modeling of Sheet Metal Assembly for Dimensional Control," ASME Transactions, Journal of Manufacturing Science & Engineering, Vol. 121, pp. 756-762 (1999).
29. Khan, A., Ceglarek, D., and Ni, J., "Sensor Location Optimization for Fault Diagnosis in Multi-Fixture Assembly Systems," Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 4, pp. 781-792 (1998).
30. Khan, A., Ceglarek, D., Shi, J., Ni, J., and Woo, T. C., "Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 121, pp. 109-117 (1999).
31. Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G. A., and Brussel, H., "Reconfigurable Manufacturing Systems," Annals of CIRP, Vol. 50, No. 2 (1999).
32. Lawless, J. F., Mackay, R. J., and Robinson, J. A., "Analysis of Variation Transmission in Manufacturing Processes - Part I," Jouranal of Quality Technology, Vol. 31, pp. 131-142 (1999).
33. Mantripragada, R. and Whitney, D. E., "Modeling and Controlling Variation Propagation in Mechanical Assemblies Using State Transition Models," IEEE Transactions on Robotics and Automation, Vol. 15, pp. 124-140 (1999).
34. Mehrabi, M. G., Ulsoy, A. G., and Koren, Y., "Reconfigurable Manufacturing Systems: Key to Future Manufacturing," Journal of Intelligent Manufacturing, Vol. 11, No. 4, pp. 403-419 (2000).
35. Menassa, R. J. and DeVries, W. R., "Locating Point Synthesis in Fixture Design," Annals of CIRP, Vol. 38, No. 1, pp. 165-169 (1989).
36. Parkinson, A., Sorensen, C., and Pourhassan, N., "A General Approach for Robust Optimal Design," Transactions of ASME, Journal of Mechanical Design, Vol. 115, No. 1, pp. 74-80 (1993).
37. Perceptron, 1000, "Measurement System Manual," Perception Inc. (1991).
38. Sekine, Y., Koyama, S., and Imazu, H., "Nissan's New Production System: Intelligent Body Assembly System," SAE Technical Paper Series, 910816, pp. 1-12 (1991).
39. Shalon, D., Gossard, D., Ulrich, K., and Fitzpatrick, D., "Representing Geometric Variations in Complex Structural Assemblies on CAD Systems," Proceedings of the 19th Annual ASME Advances in Design Automation Conference, Vol. DE-44, No. 2, pp. 121-132 (1992).
40. Sun, R., Quick Response Manufacturing: A Company wide Approach to Reducing Lead Times, Productivity Press (1998).
41. Takezawa, N., "An Improved Method for Establishing the Process-Wise Quality Standard" Rep. Stat. Appl. Res., JUSE, Vol. 27, No. 3, pp. 63-75 (1980).
42. Thomke, S. and Fujimoto, T., "The Effect of "Front- Loading" Problem-Solving on Product Development Performance," Journal of Production Innovation Management, Vol. 17, No. 2, pp. 128-142 (2000).
43. Ulrich, K., Sartorius, D., Pearson, S., and Jakiela, M., "Including the Value of Time in Design-for-Manufacturing Decision-Making," Management Science, Vol. 39, No. 4, pp. 429-447 (1993).