Chemical solution deposition of YBa2Cu3O7-x coated conductors

Current Opinion in Solid State and Materials Science

Volumn 10, Issue 5-6, 2006, Pages 205-216

  Knoth, K ^a,b   Engel, S ^a,b   Apetrii, C ^a,b   Falter, M ^a   Schlobach, B ^a   Huhne R ^a   Oswald, S ^a   Schultz, L ^a,b   Holzapfel, B ^a,b  

^a IFW DRESDEN   (Germany)

^b DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Buffer layers; Chemical solution deposition; Coated conductors; Trifluoroacetate route; YBa2Cu3O7 x superconductor

Indexed keywords

BUFFER LAYERS; CRITICAL CURRENTS; DEPOSITION; ELECTRIC CONDUCTORS; ELECTRIC POWER SYSTEMS; OXIDE SUPERCONDUCTORS; SUPERCONDUCTIVITY;

CHEMICAL SOLUTION DEPOSITION; COATED CONDUCTORS; TRIFLUOROACETATE ROUTES;

YTTRIUM BARIUM COPPER OXIDES;

EID: 34548664870     PISSN: 13590286     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cossms.2007.07.001     Document Type: Review

References (87)

1. Van Driessche I., Schoofs B., Penneman G., Bruneel E., and Hoste S. Review of the application of high temperature superconductors in coated conductor development and the measurement of their properties. Meas Sci Rev 5 (2005) 19-29
2. Fuji H., Teranishi R., Kito Y., Matsuda J., Nakaoko K., Izumi T., et al. Progress on TFA-MOD coated conductor development. Physica C 426-431 (2005) 938-944
3. Aoki Y., Teranishi R., Kitoh Y., Fuji H., Nakaoka K., Koyama T., et al. Fabrication of 10-m class Y-123 coated conductors using continuous reel-to-reel process by TFA-MOD method. Physica C 426-431 (2005) 945-948
4. Paranthaman M.P., Chirayil T.G., List R.A., Cui X., Goyal A., Lee D.F., et al. Fabrication of long lengths of epitaxial buffer layers on biaxially textured nickel substrates using a continuous reel-to-reel dip-coating unit. J Am Ceram Soc 84 (2001) 273-278
5. Schoop U., Rupich M.W., Thieme C., Verebelyi D.T., Zhang W., Li X., et al. Second generation HTS wire based on RABiTS substrates and MOD YBCO. IEEE Trans Appl Supercond 15 (2005) 2611-2616 Presents high-performance long-length YBCO coated conductors involving CSD prepared YBCO
6. c values of YBCO coated conductors with CSD-YBCO
7. Rupich M.W., Verebelyi D.T., Zhang W., Kodenkandath T., and Li X. Metalorganic deposition of YBCO films for second-generation high-temperature superconductor wires. MRS Bull 29 (2004) 572-578
8. c superconducting materials for electric power applications. Nature 414 (2001) 368-377 Shows an overview of the potential of HTS materials, particularly HTS wires to applications
9. 7-δ bicrystals. Phys Rev Lett 61 (1988) 219-222
10. Iijima Y., Kakimoto K., Yamada Y., Izumi T., Saitoh T., and Shiohara Y. Research and development of biaxially textured IBAD-GZO templates for coated superconductors. MRS Bull 29 (2004) 564-571
11. Arendt P.N., and Foltyn S.R. Biaxially textured IBAD-MgO templates for YBCO-coated conductors. MRS Bull 29 (2004) 543-551
12. 7-x thin films deposited on polycrystalline metallic substrates. Appl Phys Lett 60 (1992) 769-771
13. Balachandran U., Ma B., Li M., Fisher B.L., Koritala R.E., Miller D.J., et al. Development of coated conductors by inclined substrate deposition. Physica C 392-396 (2003) 806-814
14. Prusseit W., Nemetschek R., Hoffmann C., Sigl G., Lümkemann A., and Kinder H. ISD process development for coated conductors. Physica C 426-431 (2005) 866-871
15. Eickemeyer J., Selbmann D., Opitz R., Wendrock H., Maher E., Miller U., et al. Highly cube textured Ni-W-RABiTS tapes for YBCO coated conductors. Physica C 372-376 (2002) 814-817
16. 7 on biaxially textured nickel (0 0 1): an approach to superconducting tapes with high critical current density. Science 274 (1996) 755-757 First paper that presents cube textured Ni-tapes as templates for the preparation of YBCO based wire
17. Goyal A., Paranthaman M.P., and Schoop U. The RABiTS approach: using rolling-assisted biaxially textured substrates for high-performance YBCO superconductors. MRS Bull 29 (2004) 552-561
18. Fuji H., Honjo T., Teranishi R., Tokunaga Y., Matsuda J., Asada S., et al. Processing for long YBCO coated conductors by advanced TFA-MOD process. Physica C 412-414 (2004) 916-919
19. Eickemeyer J., Selbmann D., Opitz R., de Boer B., Holzapfel B., Schultz L., et al. Nickel-refractory metal substrate tapes with high cube texture stability. Supercond Sci Technol 14 (2001) 152-159
20. 7 buffer layers for YBCO-coated conductors prepared by chemical solution deposition. Supercond Sci Technol 18 (2005) 334-339
21. 7-buffered long lengths of biaxially textured Ni-W substrates for YBCO-coated conductors. Supercond Sci Technol 18 (2005) 1385-1390
22. 7 and Ce-Gd-O buffer layers for YBCO coated conductors using chemical solution deposition. Physica C 426-431 (2005) 979-984
23. 3 buffer layers on biaxially textured Ni-W substrates for YBCO coated conductors by MOD approach. Physica C 422 (2005) 95-101
24. 3 buffer layers on Ni tapes by reel-to-reel sol-gel process for YBCO coated conductors. Mat Sci Eng B-Solid 106 (2004) 1-5
25. 7 thin films as buffer layers for second-generation high-temperature superconductor wires. J Mater Res 20 (2005) 2988-2996
26. 2 buffer layers on biaxially textured Ni-W substrates for YBCO coated conductors. Supercond Sci Technol 16 (2003) 1305-1309
27. Akin Y., Aslanoglu Z., Celik E., Arda L., Sigmund W., and Hascicek Y.S. Textured growth of multi-layered buffer layers on Ni tape by sol-gel process. IEEE Trans Appl Supercond 13 (2003) 2673-2676
28. 7-δ coated conductors. J Am Ceram Soc 86 (2003) 257-265
29. Zhou Y.X., Zhang S., Fang H., Putman P.T., and Salama K. Development of single solution buffer layers on textured Ni substrates for HTS coated conductors. IEEE Trans Appl Supercond 15 (2005) 2711-2714
30. Bhuiyan M.S., Paranthaman M., Sathyamurthy S., Goyal A., and Salama K. Growth of rare-earth niobate-based pyrochlores on textured Ni-W substrates with ionic radii dependency. J Mater Res 20 (2005) 904-909
31. c for an all-CSD YBCO coated conductor, reported so far
32. 3 buffer layers on Ni tapes for YBCO coated conductors. IEEE Trans Appl Supercond 13 (2003) 2669-2672
33. 7-x-coated superconductors - metalorganic deposition using trifluoroacetates. Supercond Sci Technol 16 (2003) R71-R94 Gives a detailed overview of the main aspects of CSD grown YBCO layers based on the important trifluoroacetate (TFA) process
34. Schwartz R.W., Schneller T., and Waser R. Chemical solution deposition of electronic oxide films. CR Chimie 7 (2004) 433-461 An extensive overview about the basics of the chemical solution deposition approach is presented as well as examples of the growth of oxide films for applications in the semiconductors industry are discussed
35. Schneller T., and Waser R. Chemical solution deposition of ferroelectric thin films - state of the art and recent trends. Ferroelectrics 267 (2002) 293-301
36. Brinker C.F., and Scherer G.W. Sol-gel science (1990), Academic Press, Boston
37. Schwartz R.W. Chemical solution deposition of perovskite thin films. Chem Mater 9 (1997) 2325-2340
38. Van Driessche I., Penneman G., Bruneel E., and Hoste S. Nonvacuum-based deposition techniques for superconducting ceramic coatings. Pure Appl Chem 74 (2002) 2101-2109
39. Lange F.F. Chemical solution routes to single-crystal thin films. Science 273 (1996) 903-909 Summarizes the most important aspects of epitaxial growth of chemical solution derived thin films
40. Hodes G. Chemical solution deposition of semiconductor films (2002), Dekker, New York and Basel
41. Bhuiyan M.S., Paranthaman M., and Salama K. Solution-derived textured oxide thin films - a review. Supercond Sci Technol 19 (2006) R1-R21 Most recent review article on chemical solution deposition derived layers for YBCO coated conductors
42. 7-y (R: rare earth and Y) superconductor. J Mater Res 15 (2000) 2547-2557 Discusses the epitaxial growth of several oxide layers, derived by CSD, on different substrates and explores growth determining factors
43. 7-δ-coated conductors. Int J Appl Ceram Technol 2 (2005) 24-32
44. 7 films. J Eur Ceram Soc 24 (2004) 1831-1835
45. 2 seed layers and thin films on Ni substrates by chemical solution deposition using inorganic cerium nitrate as a precursor. Physica C 419 (2005) 7-12
46. Takahashi Y., Aoki Y., Hasegawa T., Maeda T., Honjo T., Yamada Y., et al. Preparation of YBCO coated conductors on metallic tapes using an MOD process. Physica C 412-414 (2004) 905-909
47. Sathyamurthy S., Paranthaman M., Zhai H.Y., Kang S., Aytug T., Cantoni C., et al. Chemical solution deposition of lanthanum zirconate barrier layers applied to low-cost coated-conductor fabrication. J Mater Res 19 (2004) 2117-2123
48. 7 buffer layers on Ni tapes by reel-to-reel sol-gel technique. Mater Sci Eng B-Solid 106 (2004) 182-190
49. Obradors X., Puig T., Pomar A., Sandiumenge F., Pinol S., Mestres N., et al. Chemical solution deposition: a path towards low cost coated conductors. Supercond Sci Technol 17 (2004) 1055-1064 Presents investigations of the TFA-YBCO layer growth on several oxide substrates
50. Wang S., Chen S., Fu H., Shi K., Liu L., Liu Q., et al. One-step sol-gel growth of textured buffer layers on cold-rolled Ni substrates for coated conductor fabrication. IEEE Trans Appl Supercond 15 (2005) 3001-3004
51. 3 (M = Ba, Sr) buffer layers on surface oxidized Ni/NiO templates by PLD and MOD. IEEE Trans Appl Supercond 15 (2005) 3024-3027
52. 3 films on textured Ni substrates using chemical solution deposition. J Mater Res 20 (2005) 910-921
53. 7-δ-coated conductors. Appl Phys Lett 80 (2002) 2710-2712 First demonstration of an all-solution YBCO coated conductor carrying a critical current
54. 7-δ superconducting layers using an aqueous sol-gel method. Key Eng Mat 264-268 (2004) 501-504
55. 7-coated conductors. Supercond Sci Technol 19 (2006) S13-S26 Most article on progress of YBCO coated conductor development involving CSD, including detail investigation on TFA-YBCO growth
56. 2 buffer layers for YBCO films on textured Ni tapes and Pt tapes. Physica C 308 (1998) 91-98
57. c superconducting tapes. Physica C 336 (2000) 63-69
58. c coated conductor fabrication. IEEE Trans Appl Supercond 15 (2005) 2974-2976
59. Zhou Y.X., Bhuiyan S., Scruggs S., Fang H., Mironova M., and Salama K. Strontium titanate buffer layers deposited on rolled Ni substrates with metal organic deposition. Supercond Sci Technol 16 (2003) 901-906
60. 3 buffer layers on Ni substrates. J Mater Res 17 (2002) 1678-1685
61. Gupta A., Jagannathan R., Cooper E.I., Giess E.A., Landman J.I., and Hussey B.W. Superconducting oxide films with high transition temperature prepared from metal triuoroacetate precursors. Appl Phys Lett 52 (1988) 2077-2079
62. x microstructures by polymer-metal-complex precursor synthesis. J Polym Sci 28 (1990) 1999-2033
63. VonLampe I., Wasche M., and Lorkowski H.J. High-temperature superconducting ceramics from polymer-metal precursors. Acta Polym 44 (1993) 148-151
64. Apetrii C., Schlörb H., Falter M., Lampe I., Schultz L., and Holzapfel B. YBCO thin films prepared by fluorine-free polymer-based chemical solution deposition. IEEE Trans Appl Supercond 15 (2005) 2642-2644
65. x thin films using a fluorine-free sol-gel approach for coated conductors. Supercond Sci Technol 17 (2004) 1420-1425
66. 2-buffered yttria-stabilized zirconia substrates by fluorine-free metalorganic deposition. Jpn J Appl Phys 44 (2005) 4914-4918
67. 7-x film fabricated by the metalorganic deposition method using trifluoroacetates. Supercond Sci Technol 14 (2001) L21-L24
68. 7-x films by dip coating. Physica C 372-376 (2002) 46-49
69. 3. J Appl Phys 71 (1992) 1868-1877
70. Tokunaga Y., Honjo T., Izumi T., Shiohara Y., Iijima Y., Saitoh T., et al. Advanced TFA-MOD process of high critical current YBCO films for coated conductors. Cryogenics 44 (2004) 817-822
71. 7-δ thin films. Physica C 402 (2004) 143-151
72. 7-δ film morphology using high-boiling-point solvents. J Mater Res 17 (2002) 1900-1903
73. Smith J.A., Cima M.J., and Sonnenberg N. High critical current density thick MOD-derived YBCO films. IEEE Trans Appl Supercond 9 (1999) 1531-1534
74. 7-δ on rolling assisted biaxially textured substrates. J Mater Res 18 (2003) 1109-1122
75. Izumi T., Fuji H., Aoki Y., Teranishi R., Nakaoka K., Matsuda J., et al. Progress in R&D for coated conductors by TFA-MOD processing. IEEE Trans Appl Supercond 15 (2005) 2743-2746
76. Matsuda J.S., Tokunaga Y., Teranishi R., Fuji H., Kaneko A., Asada S., et al. Effects of heat-treatment conditions on microstructure of multi-coating Y123 films deposited by advanced TFA-MOD method. Physica C 412-414 (2004) 890-895
77. 7 films. Supercond Sci Technol 18 (2005) 1141-1150
78. Nakaoka K., Tokunaga Y., Matsuda J.S., Fuji H., Koyama S., Teranishi, et al. Fabrication of YBCO coated conductors using advanced TFA-MOD process. Physica C 426-431 (2005) 954-958
79. c YBCO thin films and multilayers grown by chemical solution deposition. IEEE Trans Appl Supercond 15 (2005) 2747-2750
80. O2 = 100 Pa. Solid State Sci 7 (2005) 1333-1343
81. 7-y films deposited by advanced TFA-MOD method. Physica C 426-431 (2005) 1051-1055
82. 7-y film by advanced TFA-MOD process. Physica C 426-431 (2005) 949-953
83. 7-δ quasi-multilayers. Appl Phys Lett 86 (2005) 122508
84. 3 quasimultilayers. J Appl Phys 98 (2005) 123906
85. Selvamanickam V., Xie Y., Reeves J., and Chen Y. MOCVD-based YBCO-coated conductors. MRS Bull 29 (2004) 579-582
86. Usoskin A., and Freyhardt H.C. YBCO-coated conductors manufactured by high-rate pulsed laser deposition. MRS Bull 29 (2004) 583-589
87. Teranishi R., Izumi T., and Shiohara Y. Highlights of coated conductor development in Japan. Supercond Sci Technol 19 (2006) S4-S12