Effect of varus/valgus malalignment on bone strains in the proximal tibia after TKR: An explicit finite element study

Journal of Biomechanical Engineering

Volumn 129, Issue 1, 2007, Pages 1-11

  Perillo Marcone, A ^a   Taylor, M ^a  

^a UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

Author keywords

Cancellous bone strains; Eccentric loading; Explicit finite element analysis; Patient specific modeling; TKR

Indexed keywords

COMPUTER SIMULATION; DISEASES; FINITE ELEMENT METHOD; GAIT ANALYSIS; IMPLANTS (SURGICAL); JOINTS (ANATOMY);

ASEPTIC LOOSENING; CANCELLOUS BONE STRAINS; ECCENTRIC LOADING; PATIENT SPECIFIC MODELING; STRAIN DISTRIBUTION;

BONE;

ARTICLE; BONE STRESS; CANCELLOUS BONE; COMPRESSIVE STRENGTH; COMPUTER ASSISTED TOMOGRAPHY; ECCENTRIC MUSCLE CONTRACTION; FINITE ELEMENT ANALYSIS; GAIT; IMPLANT; JOINT MOBILITY; TENSILE STRENGTH; TIBIA SHAFT; TOTAL KNEE REPLACEMENT; VALGUS DEFORMITY; VARUS DEFORMITY;

ARTHROPLASTY, REPLACEMENT, KNEE; BONE MALALIGNMENT; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; ELASTICITY; FINITE ELEMENT ANALYSIS; HUMANS; MODELS, BIOLOGICAL; PROSTHESIS FAILURE; STRESS, MECHANICAL; TIBIA; TREATMENT OUTCOME;

VALGUS;

EID: 34248173027     PISSN: 01480731     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2401177     Document Type: Article

References (54)

1. Hilding, M., Asplund, S., Bäckbro, B., and Ryd, L., 1993, "Alignment Accuracy by Two Different Instrumentation Systems in Total Knee Arthroplasty," Am. J. Knee Surg., 6, pp. 150-158.
2. Liau, J. J., Cheng, C. K., Huang, C. K, and Lo, W. H., 2002, "The Effect of Malalignment on Stresses in Polyethylene Component of Total Knee Prostheses - A Finite Element Analysis," Clin. Biomech. (Bristol, Avon), 17, pp. 140-146.
3. Bargren, J., Blaha, J., and Freeman, M., 1983, "Alignment in Total Knee Arthroplasty. Correlated Biomechanical and Clinical Observations," Clin. Orthop. Relat. Res., 173, pp. 178-183.
4. Hsu, H. P., Garg, A., Walker, P. S., Spector, M., and Ewald, F. C., 1989, "Effect of Knee Component Alignment on Tibial Load Distribution With Clinical Correlation," Clin. Orthop. Relat. Res., 248, pp. 135-144.
5. Lotke, P., and Ecker, M., 1977, "Influence of Positioning of Prosthesis in Total Knee Replacement," J. Bone Jt. Surg., Am. Vol., 59(1), pp. 77-79.
6. Ritter, M., Herbst, S., Keating, E., and Faris, P., 1994, "Radiolucency at the Bone-Cement Interface in Total Knee Replacement. The Effects of Bone-Surface Preparation and Cement Technique," J. Bone Jt. Surg., Am. Vol., 76(1), pp. 60-65.
7. Jeffery, R., Morris, R., and Denham, R., 1991, "Coronal Alignment After Total Knee Replacement," J. Bone Jt. Surg., Br. Vol., 73(5), pp. 709-714.
8. Tew, M., and Waugh, W., 1985, "Tibiofemoral Alignment and the Results of Knee Replacement," J. Bone Jt. Surg., Br. Vol., 67(4), pp. 551-556.
9. Lewallen, D., Bryan, R., and Peterson, L., 1984, "Polycentric Total Knee Arthroplasty. A Ten-Year Follow-up Study," J. Bone Jt. Surg., Am. Vol., 66(8), pp. 1211-1218.
10. Coull, R., Bankes, M. J. K., and Rossouw, D. J., 1999, "Evaluation of Tibial Component Angles in 79 Consecutive Total Knee Arthroplasties," The Knee, 6, pp. 235-237.
11. Albrektsson, B. E., Ryd, L., Carlsson, L. V., Freeman, M. A., Herberts, P., Regner, L., and Selvik, G., 1990, "The Effect of a Stem on the Tibial Component of Knee Arthroplasty. A Roentgen Stereophotogrammetric Study of Uncemented Tibial Components in the Freeman-Samuelson Knee Arthroplasty," J. Bone Jt. Surg., Br. Vol., 72, pp. 252-258.
12. Albrektsson, B. E., Carlsson, L. V., Freeman, M. A., Herberts, P., and Ryd, L., 1992, "Proximally Cemented Versus Uncemented Freeman-Samuelson Knee Arthroplasty. A Prospective Randomised Study," J. Bone Jt. Surg., Br. Vol., 74, pp. 233-238.
13. Carlsson, L. V., Albrektsson, B. E., Freeman, M. A., Herberts, P., Malchau, H., and Ryd, L., 1993, "A New Radiographic Method for Detection of Tibial Component Migration in Total Knee Arthroplasty," J. Arthroplasty, 8, pp. 117-123.
14. Nelissen, R. G., Valstar, E. R., and Rozing, P. M., 1998, "The Effect of Hydroxyapatite on the Micromotion of Total Knee Prostheses. A Prospective, Randomized, Double-Blind Study," J. Bone Jt. Surg., Am. Vol., 80, pp. 1665-1672.
15. Önsten, I., Nordqvist, A., Carlsson, A. S., Besjakov, J., and Shott, S., 1998, "Hydroxyapatite Augmentation of the Porous Coating Improves Fixation of Tibial Components. A Randomised RSA Study in 116 Patients," J. Bone Jt. Surg., Br. Vol., 80, pp. 417-425.
16. Ryd, L., Albrektsson, B. E., Carlsson, L., Dansgard, F., Herberts, P., Lindstrand, A., Regner, L., and Toksvig-Larsen, S., 1995, "Roentgen Stereophotogrammetric Analysis as a Predictor of Mechanical Loosening of Knee Prostheses," J. Bone Jt. Surg., Br. Vol., 77, pp. 377-383.
17. Grewal, R., Rimmer, M. G., and Freeman, M. A., 1992, "Early Migration of Prostheses Related to Long-Term Survivorship. Comparison of Tibial Components in Knee Replacement," J. Bone Jt. Surg., Br. Vol., 74, pp. 239-242.
18. Fukuoka, S., Yoshida, K., and Yamano, Y., 2000, "Estimation of the Migration of Tibial Components in Total Knee Arthroplasty," J. Bone Jt. Surg., Br. Vol., 82, pp. 222-227.
19. Taylor, M., and Tanner, K. E., 1997, "Fatigue Failure of Cancellous Bone: A Possible Cause of Implant Migration and Loosening," J. Bone Jt. Surg., Br. Vol., 79, pp. 181-182.
20. Murase, K., Crowninshield, R. D., Pedersen, D. R., and Chang, T. S., 1983, "An Analysis of Tibial Component Design in Total Knee Arthroplasty," J. Biomech., 16, pp. 13-22.
21. Beaupre, G. S., Vasu, R., Carter, D. R., and Schurman, D. J., 1986, "Epiphyseal-Based Designs for Tibial Plateau Components - II. Stress Analysis in the Sagittal Plane," J. Biomech., 19, pp. 663-673.
22. Vasu, R., Carter, D. R., Schurman, D. J., and Beaupre, G. S., 1986, "Epiphyseal-Based Designs for Tibial Plateau Components - I. Stress Analysis in the Frontal Plane," J. Biomech., 19, pp. 647-662.
23. Rakotomanana, R. L., Leyvraz, P. F., Curnier, A., Heegaard, J. H., and Rubin, P. J., 1992, "A Finite Element Model for Evaluation of Tibial Prosthesis-Bone Interface in Total Knee Replacement," J. Biomech., 25, pp. 1413-1424.
24. Lewis, J. L., Askew, M. J., and Jaycox, D. P., 1982, "A Comparative Evaluation of Tibial Component Designs of Total Knee Prostheses," J. Bone Jt. Surg., Am. Vol., 64, pp. 129-135.
25. Bartel, D. L., Burstein, A. H., Santavicca, E. A., and Insall, J. N., 1982, "Performance of the Tibial Component in Total Knee Replacement," J. Bone Jt. Surg., Am. Vol., 64, pp. 1026-1033.
26. Perillo-Marcone, A., Barrett, D. S., and Taylor, M., 2000, "The Importance of Tibial Alignment: Finite Element Analysis of Tibial Malalignment," J. Arthroplasty, 15, pp. 1020-1027.
27. Taylor, M., Tanner, K., and Freeman, M., 1998, "Finite Element Analysis of the Implanted Proximal Tibia: A Relationship Between the Initial Cancellous Bone Stresses and Implant Migration," J. Biomech., 31, pp. 303-310.
28. Perillo-Marcone, A., Ryd, L., Johnsson, K., and Taylor, M., 2004, "A Combined RSA and FE Study of the Implanted Proximal Tibia: Correlation of the Post-Operative Mechanical Environment With Implant Migration," J. Biomech., 37, pp. 1205-1213.
29. Perillo-Marcone, A., 2001, "Finite Element Analysis of the Proximal Implanted Tibia in Relation to Implant Loosening," Ph.D. thesis. University of Southampton, Southampton, UK.
30. Godest, A. C., Beaugonin, M., Haug, E., Taylor, M., and Gregson, P. J., 2002, "Simulation of a Knee Joint Replacement During a Gait Cycle Using Explicit Finite Element Analysis," J. Biomech., 35, pp. 267-275.
31. Taylor, M., and Barrett, D. S., 2003, "Explicit Finite Element Simulation of Eccentric Loading in Total Knee Replacement," Clin. Orthop. Relat. Res., 414, pp. 162-171.
32. Zannoni, C, Mantovani, R., and Viceconti, M., 1998, "Material Properties Assignment to Finite Element Models of Bone Structures: A New Method," Med. Eng. Phys., 20, pp. 735-740.
33. Snyder, S. M., and Schneider, E., 1991, "Estimation of Mechanical Properties of Cortical Bone by Computed Tomography," J. Orthop. Res., 9, pp. 422-431.
34. Ashman, R. B., Rho, J. Y., and Turner, C. H., 1989, "Anatomical Variation of Orthotropic Elastic Moduli of the Proximal Human Tibia," J. Biomech., 22, pp. 895-900.
35. Carter, D. R., and Hayes, W. C, 1977, "The Compressive Behavior of Bone as a Two-Phase Porous Structure," J. Bone Jt. Surg., Am. Vol., 59, pp. 954-962.
36. Linde, F., Pongsoipetch, B., Frich, L. H., and Hvid, I., 1990, "Three-Axial Strain Controlled Testing Applied to Bone Specimens From the Proximal Tibial Epiphysis," J. Biomech., 23, pp. 1167-1172.
37. Linde, F., Norgaard, P., Hvid, I., Odgaard, A., and Soballe, K., 1991, "Mechanical Properties of Trabecular Bone. Dependency on Strain Rate," J. Biomech., 24, pp. 803-809.
38. Perillo-Marcone, A., Alonso-Vazquez, A., and Taylor, M., 2003, "Assessment of the Effect of Mesh Density on the Material Property Discretisation Within QCT Based FE Models: A Practical Example Using the Implanted Proximal Tibia," Comput. Methods Biomech. Biomed. Eng., 6, pp. 17-26.
39. Abdel-Rahman, E. M., and Hefzy, M. S., 1998, "Three-Dimensional Dynamic Behaviour of the Human Knee Joint Under Impact Loading," Med. Eng. Phys., 20, pp. 276-290.
40. Blankevoort, L., and Huiskes, R., 1991, "Ligament-Bone Interaction in a Three-Dimensional Model of the Knee," J. Biomech. Eng., 113, pp. 263-269.
41. Blankevoort, L., Huiskes, R., and de Lange, A., 1991, "Recruitment of Knee Joint Ligaments," J. Biomech. Eng., 113, pp. 94-103.
42. Behrens, J. C., Walker, P. S., and Shoji, H., 1974, "Variations in Strength and Structure of Cancellous Bone at the Knee," J. Biomech., 7, pp. 201-207.
43. Lindahl, O., 1976, "Mechanical Properties of Dried Defatted Spongy Bone," Acta Orthop. Scand., 47, pp. 11-19.
44. Williams, J. L., and Lewis, J. L., 1982, "Properties and an Anisotropic Model of Cancellous Bone From the Proximal Tibial Epiphysis," J. Biomech. Eng., 104, pp. 50-56.
45. Hvid, I., and Hansen, S. L., 1985, "Trabecular Bone Strength Patterns at the Proximal Tibial Epiphysis," J. Orthop. Res., 3, pp. 464-472.
46. Keaveny, T. M., Morgan, E. F., Niebur, G. L., and Yeh, O. C., 2001, "Biomechanics of Trabecular Bone," Annu. Rev. Biomed. Eng., 3, pp. 307-333.
47. Fenech, C. M., and Keaveny, T. M., 1999, "A Cellular Solid Criterion for Predicting the Axial-Shear Failure Properties of Bovine Trabecular Bone," J. Biomech. Eng., 121, pp. 414-422.
48. Morgan, E. F., and Keaveny, T. M., 2001, "Dependence of Yield Strain of Human Trabecular Bone on Anatomic Site," J. Biomech., 34, pp. 569-577.
49. Turner, C. H., 1995, "Is Yield Strain in Cancellous Bone Isotropic?," J. Biomech., 28, pp. 763-765.
50. Chang, W. C., Christensen, T. M., Pinilla, T. P., and Keaveny, T. M., 1999, "Uniaxial Yield Strains for Bovine Trabecular Bone are Isotropic and Asymmetric," J. Orthop. Res., 17, pp. 582-585.
51. Walker, P. S., Blunn, G. W., Broome, D. R., Perry, J., Watkins, A., Sathasivam, S., Dewar, M. E., and Paul, J. P., 1997, "A Knee Simulating Machine for Performance Evaluation of Total Knee Replacements," J. Biomech., 30, pp. 83-89.
52. Tan, K., and Taylor, M., 2003, "Influence of Simulating the Collateral Ligaments When Modelling a Total Knee Replacement," Proceedings International Congress on Computational Bioengineering, Zaragoza, Spain, September 24-26, pp. 670-675.
53. Tan, K., 2004, "Assessing the Performance Envelope of Total Knee Replacements - An Explicit Finite Element Study," Ph.D. thesis, University of Southampton, Southampton, UK.
54. Røhl, L., Larsen, E., Linde, F., Odgaard, A., and Jørgensen, J., 1991, "Tensile and Compressive Properties of Cancellous Bone," J. Biomech., 24, pp. 1143-1149.