Set point weighted modified Smith predictor for integrating and double integrating processes with time delay

ISA Transactions

Volumn 46, Issue 1, 2007, Pages 59-71

  Rao, A Seshagiri ^a   Rao, V S R ^a   Chidambaram, M ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY MADRAS   (India)

Author keywords

Direct synthesis method; Integrating process; Set point weighting; Smith predictor; Time delay

Indexed keywords

CONTROL EQUIPMENT; ELECTRONIC CIRCUIT TRACKING; PHASE MEASUREMENT; PROPORTIONAL CONTROL SYSTEMS; TIME MEASUREMENT;

DIRECT SYNTHESIS METHOD; INTEGRATING PROCESS; SET POINT WEIGHTING; SMITH PREDICTOR; TIME DELAY;

PREDICTIVE CONTROL SYSTEMS;

EID: 33846938315     PISSN: 00190578     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.isatra.2006.05.002     Document Type: Article

References (34)

1. Chien I.L., and Fruehauf P.S. Consider IMC tuning to improve performance. Chem Eng Prog 10 (1990) 33-41
2. Kwak H.J., Sung S.W., and Lee I.-B. On-line process identification and auto tuning for integrating processes. Ind Eng Chem Res 36 12 (1997) 5329-5338
3. Kookos K., Lygeros A.I., and Arvanitis K.G. On-line PI controller tuning for integrator/dead time processes. Eur J Control 5 (1999) 19-31
4. Poulin E., and Pomerleau A. PI settings for integrating processes based on ultimate cycle information. IEEE Trans Control Syst Tech 7 4 (1999) 509-511
5. Wang Y.-G., and Cai W.-J. Advanced proportional-integral-derivative tuning for integrating and unstable processes with gain and phase margin specifications. Ind Eng Chem Res 41 (2002) 2910-2914
6. Chidambaram M., and Sree R.P. A simple method of tuning PID controllers for integrator/dead-time processes. Comput Chem Eng 27 (2003) 211-215
7. Astrom K.J., Hang C.C., and Lim B.C. A new Smith predictor for controlling a process with an integrator and lob dead-time. IEEE Trans Automat Control 39 2 (1994) 343-345
8. Zhang W.D., and Sun Y.X. Modified Smith predictor for controlling integrator time delay processes. Ind Eng Chem Res 35 (1996) 2769-2772
9. Skogestad S. Simple analytic rules for model reduction and PID controller tuning. J Process Control 13 (2003) 291-309
10. Zhang W., Xu X., and Sun Y. Quantitative performance design for integrating processes with time delay. Automatica 35 (1999) 719-723
11. Kaya I. Two-degree-of-freedom IMC structure and controller design for integrating processes based on gain and phase-margin specifications. IEE Proc Control Theory Appl 151 4 (2004) 401-407
12. Mataušek M.R., and Micić A.D. A modified Smith predictor for controlling a process with an integrator and long dead time. IEEE Trans Automat Control 41 8 (1996) 1199-1203
13. Mataušek M.R., and Micić A.D. On the modified Smith predictor for controlling a process with an integrator and long dead time. IEEE Trans Automat Control 44 8 (1999) 1603-1606
14. Tian Y.-C., and Gao F. Control of integrator processes with dominant time delay. Ind Eng Chem Res 38 (1999) 2979-2983
15. Kwak H.J., Whan S., and Lee I.-B. Modified Smith predictor for integrating processes: Comparisons and proposition. Ind Eng Chem Res 40 (2001) 1500-1506
16. Chien I.-L., Peng S.C., and Liu J.H. Simple method for integrating processes with long dead time. J Process Control 12 (2002) 391-404
17. Normey-Rico J.E., and Camacho E.F. A unified approach to design dead-time compensators for stable and integrative processes with dead time. IEEE Trans Automat Control 47 2 (2002) 299-305
18. Kaya I. Obtaining controller parameters for a new PI-PD Smith predictor using auto tuning. J Process Control 13 (2003) 465-472
19. Hang C.C., Wang Q.-G., and Yang X.-P. A modified Smith predictor for a process with an integrator and long dead time. Ind Eng Chem Res 42 (2003) 484-489
20. Zhong Q.-C., and Normey-Rico J.E. Control of integral processes with dead-time. Part 1: Disturbance observer-based 2DOF control scheme. IEE Proc Control Theory Appl 149 4 (2002) 285-290
21. Zhong Q.-C., and Mirkin L. Control of integral processes with dead-time. Part 2: Quantitative analysis. IEE Proc Control Theory Appl 149 4 (2002) 291-296
22. Zhong Q.-C. Control of integral processes with dead-time. Part 3: Deadbeat disturbance response. IEEE Trans Automat Control 48 1 (2003) 153-159
23. Liu T., Cai Y.Z., Gu D.Y., and Zhang W.D. New modified Smith predictor scheme for integrating and unstable processes with time delay. IEE Proc Control Theory Appl 152 2 (2005) 238-246
24. Lu X., Yang Y.-S., Wang Q.-G., and Zheng W.-X. A double two-degree-of-freedom control scheme for improved control of unstable delay processes. J Process Control 15 5 (2005) 605-614
25. Liu T., He X., Gu D.Y., and Zhang W.D. Analytical decoupling control design for dynamic plants with time delay and double integrators. IEE Proc Control Theory Appl 151 6 (2004) 745-753
26. Åström K.J., and Hägglund T. PID Controllers, theory, design and tuning. 2nd ed. (1995), ISA Publishers, Research Traingle Park (NC)
27. Ogunnaike B.A., and Ray W.H. Process modeling, dynamics and control (1994), Oxford university press, New York
28. Ho W.K., and Xu W. PID tuning for unstable processes based on gain and phase margin specifications. IEE Proc Control Theory Appl 145 5 (1998) 392-396
29. Mirkin L., and Palmor Z.J. Control issues in systems with loop delays. In: Hristu-Varsakelis D., and Levine W.S. (Eds). Handbook of networked and embedded control systems (2005), Birkhäuser 642
30. Davison D.E., and Miller D.E. Determining the least upper bound on the achievable delay margin. In: Blondel V.D., and Alexandre M. (Eds). Unsolved problems in mathematical systems and control theory (2004), Princeton University Press, New Jersey 277
31. Fung H.W., Wang Q.G., and Lee T.H. PI tuning in terms of gain and phase margins. Automatica 34 9 (1998) 1145-1149
32. Brosilow C., and Joseph B. Techniques of model based control (2002), Prentice Hall PTR, Upper Saddle River (New Jersey) p. 66
33. Chidambaram M. Set-point weighted PI/PID controllers for integrating plus dead time processes. In: Kanakasabapathy P, Muthu, R, editors. Proceedings of the national symposium on intelligent measurement & control. 2000. p. 324-8
34. Morari M., and Zafiriou E. Robust process control (1989), Prentice Hall, Englewood Cliffs