Heat/mass transfer with circular pin fins in impingement/effusion cooling system with crossflow

Journal of Thermophysics and Heat Transfer

Volumn 20, Issue 4, 2006, Pages 728-737

  Hong, Sung Kook ^a,b   Rhee, Dong Ho ^a,b   Cho, Hyung Hee ^a,b  

^a Yonsei University   (South Korea)

^b Department of Mechanical Engineering ^*  (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING SYSTEMS; HEAT TRANSFER; MASS TRANSFER; REYNOLDS NUMBER; SUBLIMATION; WAKES;

EFFUSION COOLING SYSTEM; IMPINGEMENT COOLING SYSTEM; PIN FINS; TURBULATORS;

FINS (HEAT EXCHANGE);

COOLING SYSTEMS; FINS (HEAT EXCHANGE); HEAT TRANSFER; MASS TRANSFER; REYNOLDS NUMBER; SUBLIMATION; WAKES;

EID: 33750988205     PISSN: 08878722     EISSN: 15336808     Source Type: Journal    
DOI: 10.2514/1.16864     Document Type: Article

References (36)

1. Hollwarth, B. R., and Dagan, L., "Arrays of Impinging Jets with Spent Fluid Removal Through Vent Holes on the Target Surface Part 1 : Average Heat Transfer," Journal of Engineering for Power, Vol. 102, No. 4, 1980, pp. 994-999.
2. Hollwarth, B. R., Lehmann, G., and Rosiczkowski, J., "Arrays of Impinging Jets with Spent Fluid Removal Through Vent Holes on the Target Surface Part 2: Local Heat Transfer," Journal of Engineering for Power, Vol. 105, No. 2, 1983, pp. 393-402.
3. Nazari, A., and Andrews, G. E., "Impingement/Effusion Cooling: Influence of Number of the Holes and Pressure Loss on Film and Heat Transfer Coefficient," Proceedings of the 7th International Gas Turbine Congress, Vol. 2, 1999, pp. 638-648.
4. Cho, H. H., and Goldstein, R. J., "Effect of Hole Arrangements on Impingement/Effusion Cooling," Proceedings of the 3rd Korean Society of Mechanical Engineers-Japan Society of Mechanical Engineers Thermal Engineering Conference, 1996, pp. 71-76.
5. Cho, H. H., and Rhee, D. H., "Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling System," Journal of Turbomachinery, Vol. 123, No, 3, 2001, pp. 601-608.
6. Rhee, D. H., Choi, J. H., and Cho, H. H., "Heat (Mass) Transfer on Effusion Plate in Impingement/Effusion Cooling Systems," Journal of Thermophysics and Heat Transfer, Vol. 17, No. 1, 2003, pp. 95-102.
7. Metzger, D. E., and Korstad, R. J., "Effects of Cross Flow in Impingement Heat Transfer," Journal of Engineering for Power, Vol. 94, No. 1, 1972, pp. 35-41.
8. Behbahani, A. I., and Goldstein, R. J., "Local Heat Transfer to Staggered Arrays of Impinging Circular Air Jets," Journal of Engineering for Power, Vol. 105, No. 2, 1983, pp. 354-360.
9. Florschuetz, L. W., Metzger, D. E., and Su, C. C., "Heat Transfer Characteristics for Jet Array Impingement with Initial Crossflow," Journal of Heat Transfer, Vol. 106, No. 1, 1984, pp. 34-41.
10. Haiping, C., Wanbing, C., and Taiping, H., "3-D Numerical Simulation of Impinging Jet Cooling with Initial Crossflow," American Society of Mechanical Engineers, Paper 99-GT-256, 1999.
11. Rhee, D. H., Yoon, P. H., and Cho, H. H., "Local Heat/Mass Transfer and Flow Characteristics of Array Impinging Jets with Effusion Holes Ejecting Spent Air," International Journal of Heat and Mass Transfer, Vol. 46, No. 6, 2003, pp. 1049-1061.
12. Bailey, J. C., and Bunker, R. S., "Local Heat Transfer and Flow Distributions for Impinging Jet Arrays of Dense and Sparse Extent," American Society of Mechanical Engineers, Paper GT-2002-30473, 2002.
13. Gao, L., Ekkad, S. V., and Bunker, R. S., "Impingement Heat Transfer Under Linearly Stretched Arrays of Holes," American Society of Mechanical Engineers, Paper GT-2003-38178, 2003.
14. Huang, Y., Ekkad, S. V., and Han, J. C., "Detailed Heat Transfer Distributions Under an Array of Orthogonal Impinging Jets," Journal of Thermophysics and Heat Transfer, Vol 12, No. 1, 1998, pp. 73-79.
15. Ekkad, S. V., Huang, Y., and Han, J. C., "Impingement Heat Transfer on a Target Plate with Film Cooling Holes," Journal of Thermophysics and Heat Transfer, Vol. 13, No. 4, 1999, pp. 522-528.
16. Rhee, D. H., Choi, J. H., and Cho, H. H., "Flow and Heat (Mass) Transfer Characteristics in an Impingement/Effusion Cooling System with Crossflow," Journal of Turbomachinery, Vol. 125, No. 1, 2003, pp. 74-82.
17. Haiping, C., Dalin, Z., and Taiping, H., "Impingement Heat Transfer from Rib Roughened Surface Within Arrays of Circular Jets: the Effects of the Relative Position of the Jet Hole to the Ribs," American Society of Mechanical Engineers, Paper 97-GT-331, 1997.
18. Haiping, C., Jingyu, Z., and Taiping, H., "Experimental Investigation on Impingement Heat Transfer from Rib Roughened Surface Within Arrays of Circular Jets: Effect of Geometric Parameters," American Society of Mechanical Engineers, Paper No. 98-GT-208, 1998.
19. Andrews, G. E., Abdul Hussain, R. A. A., and Mkpadi, M. C., "Enhanced Impingement Heat Transfer: Comparison of Co-flow and Cross-flow with Rib Tabulators," Proceedings of IGTC2003, Paper No. IGTC2003Tokyo TS-075, 2003.
20. Rhee, D. H., Nam, Y. W., and Cho, H. H., "Local Heat/Mass Transfer with Various Rib Arrangements in Impingement/Effusion Cooling System with Crossflow," Journal of Turbomachinery, Vol. 126, No. 4, 2004, pp. 615-626.
21. Andrews, G. E., Abdul Hussain, R. A. A., and Mkpadi, M. C., "Enhanced Impingement Heat Transfer: The Influence of Impingement X/D for Interrupted Rib Obstacles (Rectangular Pin Fins)," American Society of Mechanical Engineers, Paper GT-2004-54184, 2004.
22. Annerfeldt, M. O., Persson, J. L., and Torison, T., "Experimental Investigation of Impingement Cooling with Turbulators or Surface Enlarging Elements," American Society of Mechanical Engineers, Paper 2001-GT-0149, 2001.
23. Funazaki, K., Tarukawa, Y., Kudo, T., Mastsuno, S., Imai, R., and Yamawki, S., "Heat Transfer Characteristics of an Integrated Cooling Configuration for Ultra-High Temperature Turbine Blades: Experimental and Numerical Investigations," American Society of Mechanical Engineers, Paper 2001-GT-0148, 2001.
24. Yamawki, S., Nakamata, C., Imai, R., Mastsuno, S., Yoshida, T., Mimura, F., and Kumada, M., "Cooling Performance of an Integrated Impingement and Pin Fin Cooling Configuration," American Society of Mechanical Engineers, Paper GT-2003-38215, 2003.
25. Cho, H. H., and Goldstein, R. J., "Heat (Mass) Transfer and Film Cooling Effectiveness with Injection Through Discrete Holes-Part 1: Within Holes and on the Back Surface," Journal of Turbomachinery, Vol. 117, No. 3, 1995, pp. 440-450.
26. Goldstein, R. J., and Cho, H. H., "A Review of Mass Transfer Measurement Using Naphthalene Sublimation," Experimental Thermal and Fluid Science, Vol. 10, No. 4, 1995, pp. 416-434.
27. Eckert, E. R. G., Analogies to Heat Transfer Processes, in Measurements In Heat Transfer, edited by E. R. G. Eckert and R. J. Goldstein, Hemisphere, New York, 1976, pp. 397-423.
28. Kline, S. J., and McClintock, F., "Describing Uncertainty in Single Sample Experiments," Mechanical Engineering, Vol. 75, No. 1, 1953, pp. 3-8.
29. Goldstein, R. J., Chyu, M. K., and Hain, R. C., "Measurement of Local Mass Transfer on a Surface in the Region of the Base of a Protruding Cylinder with a Computer-Controlled Data Acquisition System," International Journal of Heat and Mass Transfer, Vol. 28, No. 5, 1985, pp. 977-985.
30. Won, S. Y., Mahmood, G. I., and Ligrani, P. M., "Spatially-Resolved Heat Transfer and Flow Structure in a Rectangular Channel with Pin Fins," International Journal of Heat and Mass Transfer, Vol. 47, No. 8, 2004, pp. 1731-1743.
31. VanFossen, G. J., "Heat Transfer Coefficients for Staggered Arrays of Short Pin Fins," Journal of Engineering for Power, Vol. 104, No. 2, 1982, pp. 268-274.
32. Metzger, D. E., Berry, R. A., and Bronson, J. P., "Developing Heat Transfer in Rectangular Ducts with Staggered Arrays of Short Pin Fins," Journal of Heat Transfer, Vol. 104, No. 4, 1982, pp. 700-706.
33. Metzger, D. E., Shepard, W. B., and Haley, S. W., "Row Resolved Heat Transfer Variations in Pin Fin Arrays Including Effects of Non-Uniform Arrays and Flow Convergence," American Society of Mechanical Engineers, Paper 86-GT-132, 1986.
34. Chyu, M. K., Hsing, Y. C., Shih, T. I. P., and Natarajan, V., "Heat Transfer Contributions of Pins and Endwall in Pin-Fin Arrays: Effects of Thermal Boundary Condition Modeling," Journal of Turbomachinery, Vol. 121, No. 2, 1999, pp. 257-263.
35. Lau, S. C., Han, J. C., and Kim, Y. S., "Turbulent Heat Transfer and Friction in Pin Fin Channels with Lateral Flow Ejection," Journal of Heat Transfer, Vol. 111, No. 1, 1989, pp. 51-58.
36. Goldstein, R. J., Cho, H. H., and Jabbari, M. Y., "Effect of Plenum Crossflow on Heat (Mass) Transfer Near and Within the Entrance of Film Cooling Holes," Journal of Turbomachinery, Vol. 119, No. 4, 1997, pp. 761-769.