Heat (mass) transfer on effusion plate in impingement/effusion cooling systems

Journal of Thermophysics and Heat Transfer

Volumn 17, Issue 1, 2003, Pages 95-102

  Rhee, Dong Ho ^a   Choi, Jong Hyun ^a   Cho, Hyung Hee ^a  

^a Yonsei University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

ACCELERATION; COOLING SYSTEMS; HEAT TRANSFER COEFFICIENTS; JETS; MASS TRANSFER; NAPHTHALENE; REYNOLDS NUMBER; SUBLIMATION; SURFACES; VORTEX FLOW;

EFFUSION HOLE DIAMETER; EFFUSION PLATE; IMPINGEMENT EFFUSION COOLING SYSTEMS; STAGNATION POINTS;

HEAT TRANSFER;

COOLING SYSTEM; HEAT TRANSFER; MATHEMATICAL ANALYSIS; REYNOLDS NUMBER;

EID: 0037262829     PISSN: 08878722     EISSN: 15336808     Source Type: Journal    
DOI: 10.2514/2.6739     Document Type: Article

References (25)

1. Andrews, G. E., and Mkpadi, M. C., "Full-Coverage Discrete Hole Wall Cooling: Discharge Coefficients," Journal of Engineering for Gas Turbines and Power, Vol. 106, No, 1, 1984, pp. 183-192.
2. Andrews, G. E., Alikhanizadeh, M., Asere, A. A., Hussain, C. I., Khoshkabar Azari, M. S., and Mkpadi, M. C., "Small Diameter Film Cooling Holes: Wall Convective Heat Transfer," Journal of Turbomachinery, Vol. 108, No. 4, 1986, pp. 283-289.
3. Andrews, G. E., Alikhanizadeh, M. Bazdini Tehrani, F., Hussain, C. I., and Khoshkabar Azari, M. S., "Small Diameter Film Cooling Holes: The Influence of Hole Size and Pitch," American Society of Mechanical Engineers, ASME Paper 87-GT-28, 1987.
4. Andrews, G. E., and Bazdini Tehrani, F., "Small Diameter Film Cooling Hole Heat Transfer: The Influence of the Number of Holes," American Society of Mechanical Engineer, ASME Paper 89-GT-7, 1987.
5. Downs, S. J., and James, E. H., "Jet Impingement Heat Transfer-A Literature Survey." American Society of Mechanical Engineers, ASME Paper 87-HT-35, 1987.
6. Jambunathan, K., Lai, E., Moss, M. A., and Button, B. L., "A Review of Heat Transfer Data for Single Circular Jet Impingement," International Journal of Heat and Fluid Flow, Vol. 13, No. 2, 1992, pp. 106-115.
7. Viskanta, R., "Heat Transfer to Impinging Isothermal Gas and Flame Jets," Experimental Thermal and Fluid Science, Vol. 6, 1993, pp. 111-134.
8. Sparrow, E. M., and Ortiz, M. C, "Heat Transfer Coefficients for the Upstream Face of a Perforated Plate Positioned Normal to an Oncoming Flow," International Journal of Heat and Mass Transfer, Vol. 25, No. 1, 1982, 127-135.
9. Huber, A. M., and Viskanta, R., "Effect of Jet-Jet Spacing on Convective Heat Transfer to Confined, Impinging Arrays of Axisymmetric Air Jets," International Journal of Heat and Mass Transfer, Vol. 37, No, 18, 1994, pp. 2859-2869.
10. Al Dabagh, A. M., Andrews, G. E., Abdul Husain, R. A. A., Hussain, C. I., Nazari, A., and Wu, J., "Impingement/Effusion Cooling: The Influence of the Number of Impingement Holes and Pressure Loss on the Heat Transfer Coefficient," Journal of Turbomachinery, Vol. 112, No. 3, 1990, pp. 467-476.
11. Andrews, G. E., and Nazari, A. "Impingement/Effusion Cooling: Influence of the Number of Holes on the Cooling Effectiveness for an Impingement X/D of 10.5 and Effusion X/D of 7.0," Proceedings of 7th IGTC, Vol. 2, Gas Turbine Society of Japan, Toyko, Japan, 1999, pp. 639-646.
12. Hollwarth, B. R., and Dagan, L., "Arrays of Impinging Jets with Spent Fluid Removal through Vent Holes on the Target Surface Part 1: Average Heat Transfer," Journal of Engineering for Power, Vol. 102, No. 4, 1980, pp. 994-999.
13. Hollwarth, B. R., Lehmann, G., and Rosiczkowski, J., "Arrays of Impinging Jets with Spent Fluid Removal Through Vent Holes on the Target Surface Part 2: Local Heat Transfer," Journal of Engineering for Power, Vol. 105, No. 2, 1983, pp. 393-402.
14. Funazaki, K., Immatsu, N., and Yamawaki, S., "Heat Transfer Measurements of an Integrated Cooling Configuration Designed for Ultra-High Temperature Turbine Blades," Proceedings of 7th IGTC, Vol. 2, Gas Turbine Society of Japan, Tokyo, Japan, 1999, pp. 833-840.
15. Cho, H. H., and Goldstein, R. J., "Effect of Hole Arrangements on Impingement/Effusion Cooling," Proceedings of the 3rd KSME-JSME Thermal Engineering Conference, Korean Society of Mechanical Engineers/Japanese Society of Mechanical Engineers, Seoul, Korea, 1996, pp. 71-76.
16. Cho, H. H., and Rhee, D. H., "Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling Systems," Journal of Turbomachinery, Vol. 123, No. 3, 2001, pp. 601-608.
17. Goldstein, R. J., Cho, H. H., and Jabbari, M. Y., "Effect of Plenum Crossflow on Heat (Mass) Transfer Near and Within the Entrance of Film Cooling Holes," Journal of Turbomachinery, Vol. 119, No. 4, 1997, pp. 761-769.
18. Cho, H. H., and Goldstein, R. J., "Total Coverage Discrete Hole Wall Cooling," Journal of Turbomachinery, Vol. 119, No. 2, 1997, pp. 320-329.
19. Goldstein, R. J., and Cho, H. H., "A Review of Mass Transfer Measurement Using Naphthalene Sublimation," Experimental Thermal and Fluid Science, Vol. 10, No. 4, 1995, pp. 416-434.
20. Eckert, E. R. G., "Analogies to Heat Transfer Processes," Measurements in Heat Transfer, edited by E. R. G. Eckert and R. J. Goldstein, Hemisphere, New York, 1976, pp. 397-423.
21. Cho, H. H., and Goldstein, R. J., "Heat (Mass) Transfer and Film Cooling Effectiveness with Injection Through Discrete Holes-Part I: Within Holes and on the Back Surface," Journal of Turbomachinery, Vol. 117, No. 3, 1995, pp. 440-450.
22. Ambrose, D., Lawrenson, I. J., and Sparke, C. H. S., "The Vapor Pressure of Naphthalene," Journal of Chemical Thermodynamics, Vol. 7, 1975, pp. 1173-1176.
23. Kline, S. J., and McClintock, F., "Describing Uncertainty in Single Sample Experiments," Mechanical Engineering, Vol. 75, 1953, pp. 3-8.
24. Cho, H. H., Lee, C. H., and Kim, Y. S., "Characteristics of Heat Transfer in Impinging Jets by Control of Vortex Pairing," American Society of Mechanical Engineers, ASME Paper 97-GT-276, 1997.
25. Lee, J. H., and Lee, S. J., "Turbulent Heat Transfer Characteristics in a Stagnation Region of Axi-Symmetric Jet Impingement," Proceedings of 11th IHTC, Vol. 5, International Scientific Committee, Seoul, Korea, 1998, pp. 433-438.