Distributed sensing for quality and productivity improvements

IEEE Transactions on Automation Science and Engineering

Volumn 3, Issue 4, 2006, Pages 344-358

  Ding, Yu ^a,b   Elsayed, Elsayed A ^c   Kumara, Soundar ^d   Lu, Jye Chyi ^a,e   Niu, Feng ^a,f   Shi, Jianjun ^g  

^a IEEE   (United States)

^b Texas A and M University   (United States)

^c DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING   (United States)

^d The Center for Nanotechnology Education and Utilization   (United States)

^e GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^f MOTOROLA INC   (United States)

^g UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Decision making; Distributed sensor systems; Quality improvement; Sensor optimization

Indexed keywords

DISTRIBUTED SENSOR SYSTEMS; QUALITY IMPROVEMENT; SENSOR OPTIMIZATION;

DECISION MAKING; INFORMATION ANALYSIS; OPTIMIZATION; PRODUCTIVITY; SENSOR DATA FUSION;

DISTRIBUTED COMPUTER SYSTEMS;

EID: 33750049070     PISSN: 15455955     EISSN: None     Source Type: Journal    
DOI: 10.1109/TASE.2006.876610     Document Type: Article

References (121)

1. Mass Inst. Technol., Cambridge, MA, Private Discussion With Plant Manager of a Major Pharmaceutical Company, 2004.
2. "10 emerging technologies that will change the world," Technol. Rev., pp. 333-49, Feb. 2000.
3. J. Shi, J. Ni, and J. Lee, "Research challenges and opportunities in remote diagnostics and system performance assessment," in Proc. 4th IFAC Workshop on Intelligent Manufacturing Systems, Seoul, South Korea, Jul. 21-23, 1997.
4. R. C. Luo, C. C. Yih, and K. L. Su, "Multisensor fusion and integration: approaches, applications, and future research directions," IEEE Sensors J., vol. 2, no. 2, pp. 107-119, Apr. 2002.
5. K. M. Reichard, M. Van Dyke, and K. Maynard, "Application of sensor fusion and signal classification techniques in a distributed machinery condition monitoring system," Proc. SPIE, vol. 4051, pp. 329-336, 2000.
6. DARPA Sensor Information Technology Program. [Online]http://www.darpa. mil/ito/research/ito/research/sensit/index.html.
7. S. Kumar and D. Shepherd, "SensIT: sensor information technology for the warfighter," in Proc. Int. Soc. Information Fusion Conf., Aug. 2001, pp. 3-9.
8. S. Vardhan, M. Wilczynski, G. Pottie, and W. J. Kaiser, "Wireless integrated network sensors (WINS): distributed in situ sensing for mission and flight systems," in Proc. IEEE Aerospace Conf., vol. 7, 2000, pp. 459-463.
9. B. Warneke, B. Liebowitz, and K. S. J. Pister, "Smart dust: communicating with a cubic-millimeter computer," IEEE Computer, vol. 34, no. 1, pp. 2-9, Jan. 2001.
10. S. J. Hu, "Impact of 100% measurement data on statistical process control (SPC) in automobile body assembly," Ph.D. dissertation, Dept. Mech. Eng., Univ. Michigan, Ann Arbor, MI, 1990.
11. R. Patton, P. Frank, and R. Clark, Fault Diagnostics in Dynamic Systems: Theory and Applications. Upper Saddle River, NJ: Prentice-Hall, 1989.
12. Y. Wang and S. R. Nagarkar, "Locator and sensor placement for automated coordinate checking fixtures," ASME J. Manuf. Sci. Eng., vol. 121, pp. 709-719, 1999.
13. F. E. Udwadia, "Methodology for optimum sensor locations for parameter identification in dynamic systems," J. Eng. Mechan., vol. 102, pp. 368-390, 1994.
14. T. D. Fadale, A. V. Nenarokomov, and A. F. Emery, "Two approaches to optimal sensor locations," ASME J. Heat Transf., vol. 117, pp. 373-379, 1995.
15. L. M. Fraleigh, M. Guay, and J. F. Forbes, "Sensor selection for model-based real-time optimization," J. Process Contr., vol. 13, pp. 667-678, 2003.
16. A. Khan, D. Ceglarek, J. Shi, J. Ni, and T. C. Woo, "Sensor optimization for fault diagnosis in single fixture systems: a methodology," ASME J. Manuf. Sci. Eng., vol. 121, pp. 109-121, 1999.
17. Khan, D. Ceglarek, and J. Ni, "Sensor location optimization for fault diagnosis in multi-fixture assembly systems," ASME J. Manuf. Sci. Eng., vol. 120, pp. 781-792, 1998.
18. A.C. Atkinson and A.N. Donev, Optimum Experimental Designs. Oxford, U.K.: Oxford Univ. Press, 1992.
19. V. V. Fedorov, Theory of Optimal Experiments. New York: Academic, 1972.
20. D. J. Nagel, "Microsensor clusters," Microelectmn. J., vol. 33, pp. 107-119, 2002.
21. W. J. Rugh, Linear System Theory. Upper Saddle River, NJ: Prentice-Hall, 1996.
22. C. R. Rao and J. Kleffe, Estimation of Variance Components and Applications. Amsterdam, The Netherlands: North-Holland, 1988.
23. Y. Ding, J. Shi, and D. Ceglarek, "Diagnosability analysis of multi-station manufacturing processes," ASME Trans., J. Dynam. Syst., Measur., Contr., vol. 124, pp. 1-13, 2002.
24. S. Zhou, Y. Ding, Y. Chen, and J. Shi, "Diagnosability study of multi-stage manufacturing processes based on linear mixed-effects models," Technometrics, vol. 45, pp. 312-325, 2003.
25. H. Y. Lee and D. W. Apley, "Diagnosing manufacturing variation using second-order and fourth-order statistics," Int. J. Flexible Manuf. Syst., vol. 16, no. 1, pp. 45-64, 2004.
26. D. W. Apley and H. Y. Lee, "Identifying spatial variation patterns in multivariate manufacturing processes: a blind separation approach," Technometrics, vol. 45, pp. 187-198, 2003.
27. R. Müller-Fiedler and V. Knoblauch, "Reliability aspects of microsensors and micromechatronic actuators for automotive applications," Microelectron. Rel., vol. 43, pp. 1085-1097, 2003.
28. R. N. Clark, "Instrument fault detection," IEEE Trans. Aemsp. Electron. Syst., vol. AES-14, no. 3, pp. 456-465, 1978.
29. B. R. Upadhyaya, "Sensor failure detection and estimation," J. Nucl. Safety, vol. 26, pp. 23-32, 1985.
30. Y. Ding, P. Kim, D. Ceglarek, and J. Jin, "Optimal sensor distribution for variation diagnosis for multi-station assembly processes," IEEE Trans. Robot. Autom., vol. 19, no. 4, pp. 543-556, Aug. 2003.
31. E. A. Elsayed, Reliability Engineering. Reading, MA: Addison Wesley, 1996.
32. A. Surana, S. R. T. Kumara, M. Greaves, and U. N. Raghavan, "Supply chain networks: A complex adaptive systems perspective," Int. J. Prod. Res., vol. 43(20), pp. 4235-4265, 2005.
33. Y. Hong, N. Gautam, S. R. T. Kumara, A. Surana, H. Gupta, S. Lee, V. Narayanan, H. Thadakamalla, M. Brinn, and M. Greaves, "Survivability of complex system support vector machine based approach," presented at the Artificial Neural Networks in Engineering Conf., St. Louis, MO, Nov. 10-13, 2002.
34. S. Lee, N. Gautam, S. R. T. Kumara, Y. Hong, H. Gupta, A. Surana, V. Narayanan, H. Thadakamalla, M. Brinn, and M. Greaves, "Situation identification using dynamic parameters in complex agent-based planning systems," presented at the Artificial Neural Networks in Engineering Conf., St. Louis, MO, Nov. 10-13, 2002.
35. H. Kellerer, Knapsack Problems. New York: Springer-Verlag, 2004.
36. R. R. Brooks and S. Iyengar, Multi-Sensor Fusion: Fundamentals and Applications. Upper Saddle River, NJ: Prentice-Hall, 1998.
37. S. C. A. Thomopoulos, R. Viswanathan, and D. K. Bougoulias, "Optimal distributed decision fusion," IEEE Trans. Aerosp. Electron. Syst., vol. 25, no. 5, pp. 761-765, Sep. 1989.
38. Y. Ding, D. Ceglarek, and J. Shi, "Fault diagnosis of multi-station manufacturing processes using state space approach," ASME J. Manuf. Sci. Eng., vol. 124, pp. 313-322, 2002.
39. R. J. Meihold and N. D. Singpurwalla, "Understanding the Kalman filter," Amer. Statistician, vol. 37, pp. 123-127, 1983.
40. A. Dempster, "Upper and lower probabilities induced by multiple mapping," Ann. Math. Statist., vol. 38, pp. 325-339, 1967.
41. G. Shafer, A Mathematical Theory of Evidence. Princeton, NJ: Princeton Univ. Press, 1976.
42. S. Verdú, "Fifty years of Shannon theory," IEEE Trans. Inf. Theory, vol. 44, no. 6, pp. 2057-2078, Oct. 1998.
43. D. L. Donoho and I. M. Johnstone, "Adapting to unknown smoothness via wavelet shrinkage," J. Amer. Stat. Assoc., vol. 90, pp. 1200-1224, 1995.
44. N. Saito and G. Beylkin, "Multi-resolution representations using the auto-correlation functions of compactly supported wavelets," IEEE Trans. Signal Process., vol. 41, no. 12, pp. 3584-3590, Dec. 1993.
45. J. Suh, S. R. T. Kumara, and S. Mysore, "Machinery fault diagnosis and prognosis: applications of advanced signal processing techniques," Ann. Int. Inst. Prod. Eng. Res. (CIRP), vol. 48(1), pp. 317-320, 1999.
46. T. Hastie, R. Tibshirani, and J. Friedman, The Elements of Statistical Learning. New York: Springer-Verlag, 2001.
47. G. Schwarz, "Estimating the dimension of a model," Ann. Statist., vol. 6, pp. 461-464, 1978.
48. E. K. Lada, J.-C. Lu, and J. R. Wilson, "A wavelet-based procedure for process fault detection," IEEE Trans. Semicond. Manuf., vol. 15, no. 1, pp. 79-90, Feb. 2002.
49. J. Jin and J. Shi, "Feature-preserving data compression of stamping tonnage information using wavelets," Technometrics, vol. 41, pp. 327-339, 1999.
50. N. Cressie. Statistics for Spatial. Data. New York: Wiley, 1993.
51. R. H. Myers and D. C. Montgomery, Response Surface Methodology, 2nd ed. New York: Wiley, 2002.
52. P. J. Diggle, K.-Y. Liang, and S. L. Zeger, Analysis of Longitudinal Data. Oxford, U.K.: Oxford Univ. Press, 1994.
53. M. P. West and P. J. Harrison, Bayesian Forecasting and Dynamic Models. New York: Springer-Verlag, 1989.
54. J. E. Jackson, A User's Guide to Principal Components. New York: Wiley, 1991.
55. D. Ceglarek and J. Shi. "Fixture failure diagnosis for autobody assembly using pattern recognition," ASME J. Eng. Industry, vol. 188, pp. 55-65, 1996.
56. R. A. Johnson and D. W. Wichern, Applied Multivariate Statistical Analysis, 5th ed. Upper Saddle River, NJ: Prentice-Hall, 2002.
57. D. W. Apley and J. Shi, "A factor-analysis methods for diagnosing variability in multivariate manufacturing processes," Technometrics, vol. 43, pp. 84-95, 2001.
58. M. M. Gardner, J.-C. Lu, R. S. Gyurcsik, J. J. Wortman, B. E. Homung, H. H. Heinsich, E. A. Rying, S. Rao, J. C. Davis, and P. K. Mozumder, "Equipment fault detection using spatial signatures," IEEE Trans. Compon. Packag., Manuf. Technol. C, vol. 20, no. 4, pp. 295-304, Oct. 1997.
59. J. K. Kibarian and A. J. Strojwas, "Using spatial information to analyze correlations between test structure data," IEEE Trans. Semicond. Manuf., vol. 4, no. 3, pp. 219-225, Aug. 1991.
60. G. E. P. Box, G. M. Jenkins, and G. C. Reinsel, Time Series Analysis: Forecasting and Control, 3rd ed. Upper Saddle River, NJ: Prentice-Hall, 1994.
61. R. G. Brown, Smoothing, Forecasting, and Prediction of Discrete Time Series. New York: Prentice-Hall, 1962.
62. A. C. Harvey, Forecasting, Structural Time Series Models and the Kalman Filter. Cambridge, MA: Cambridge Univ. Press, 1989.
63. I. Daubechies, Ten Lectures on Wavelet, Society for Industrial and Applied Mathematics. Philadelphia, PA: SIAM, 1992.
64. R. S. Strichaitz, "How to make wavelets," Amer. Math. Monthly, vol. 100, pp. 539-556, 1993.
65. D. T. Pham and M. A. Wani, "Feature-based control chart pattern recognition," Int. J. Prod. Res., vol. 35, pp. 1875-1890, 1997.
66. S. Pittner and S. V. Kamarthi, "Feature extraction from wavelet coefficients for pattern recognition tasks," IEEE Trans. Pattern Anal. Mach. Intell., vol. 21, no. 1, pp. 83-88, Jan. 1999.
67. E. H. Isaaks and R. M. Srivastava, Applied Geo-Statistics. New York: Oxford Univ. Press, 1989.
68. M. S. Handcock and J. R. Wallis, "An approach to statistical spatialtemporal modeling of meteorological fields," J. Amer. Statist, Assoc., vol. 89, pp. 368-378, 1994.
69. S. Kamarthi, S. R. T. Kumara, and P. Cohen, "Application of wavelets to AE signal processing in metal cutting," ASME Trans., J. Manuf. Sci. Eng., 1999.
70. S. Bukkapatnam, S. R. T. Kumara, and A. L. Lakhtakia, "Fractal estimation of flank wear in turning," ASME Trans., J. Dynam. Syst., Meas., Contr., vol. 122, pp. 89-94, 2000.
71. S. T. S. Bukkapatnam, S. R. T. Kumara, A. L. Lakhtakia, and P. Srinivasan, "Neighborhood method and its coupling with the wavelet method for nonlinear signal separation of contaminated chaotic time-series data," Signal Process., vol. 82, no. 10, pp. 1351-1374, 2002.
72. J. D. Emerson and D. C. Hoaglin, "Resistant lines for x versus y," in Understanding Robust and Exploratory Data Analysis, D. C. Hoaglin, F. Mosteller, and J. W. Tukey, Eds. New York: Wiley, 1983, pp. 129-165.
73. D. M. Hawkins and N. Cressie, "Robust kriging-a proposal," Math. Geol., vol. 16, pp. 3-18, 1984.
74. P. J. Huber, Robust Statistics. New York: Wiley, 1981.
75. E. A. Garu and J. C. Lu, "Robust estimators in a spatial unilateral autore-gressive model," School of Industrial and Systems Engineering, Georgia Inst. Technol., Atlanta, GA, http://www.isye.gatech.edu/%7Ebrani/ isyestat/, 2004.
76. H. S. Jeong and E. A. Elsayed, "On-line surveillance and monitoring," in Maintenance Modeling and Optimization: State of the Art, M. Ben-Daya, S. Duffuaa, and A. Raouf, Eds. Norwell, MA: Kluwer, 2000, pp. 309-343.
77. C. Cempel, "The vibration symptom limit value in condition monitoring," in Proc. Int. Conf. Condition Monitoring, 1984, pp. 328-339.
78. _, "Determination of vibration symptom limit value in diagnostics of machinery," Maint. Manage. Int., vol. 5, pp. 297-304, 1985.
79. _, "Passive diagnostic and reliability experiment and its application in machines condition monitoring," in Proc. Int. Conf. Condition Monitoring, 1987, pp. 202-219.
80. _, "Condition assessment and forecasting form plant diagnostic data with Pareto model," in Proc. Condition Monitoring and Diagnostic Engineering Management, 1990, pp. 403-406.
81. H. Dabrowski, "Condition assessment of airborne equipment by means of vibroacoustic technique," Faculty Elect. Eng., Ph.D. dissertation, Warsaw Tech. Univ., Warsaw, Poland, 1981.
82. S. D. Silvey, Statistical Inference. Boca Raton, FL: Chapman & Hall/CRC, 1975.
83. S. Bukkapatnam. A. Lakhtakia. and S. Kumara, "Analysis of sensor signals shows turning on a lathe is chaotic," Phys. Rev. E, vol. 52, no. 3, pp. 2375-2387, 1995.
84. _, "Chaotic neurons for on-line quality control in manufacturing," Int. J. Adv. Manuf. Technol., vol. 13, pp. 95-100, 1997.
85. R. Viswanathan and P. K. Varshney, "Distributed detection with multiple sensors: part I-fundamentals," Proc. IEEE, vol. 85, no. 1, pp. 54-63, Jan. 1997.
86. N. Wang, J.-C. Lu, and P. Kvam, "Multi-scale spatial modeling for logistics reliability evaluations," School Ind. Syst. Eng., Georgia Inst. Technol., Atlanta, GA, 2004.
87. C. F. J. Wu and M. Hamada, Experiments: Planning, Analysis, and Parameter Design Optimization. New York: Wiley, 2000.
88. J. Jin and Y. Ding, "Online automatic process control using observable noise factors for discrete-part manufacturing," IIE Trans., vol. 36, pp. 899-911, 2004.
89. J. Shi, H. Zheng, X. Yang, and C. F. J. Wu, "Design of DDE-based automatic process controller for complex manufacturing processes," in Proc. Nat. Sci. Found. Grantee Conf., Dallas, TX, Jan. 6-9, 2004.
90. J. S. Fenner, M. K. Jeong, and J.-C. Lu, "Multi-Stage optimal automatic control," School Ind. Syst. Eng., Georgia Inst. Technol., Atlanta, GA, 2004.
91. A. Rying, M. C. Ozturk, G. L. Bilbro, and J. C. Lu, "In-situ selectivity and thickness monitoring during selective silicon epitaxy using quadrapole mass spectrometry and wavelets," IEEE Trans. Semicond. Manuf., vol. 18, no. 1, pp. 112-121, Feb. 2005.
92. A. Na, J.-C. Lu, N. Wang, and M. K. Jeong, "Collaborative robust parameter design in the supply-chain oriented manufacturing systems," School Ind. Syst. Eng., Georgia Inst. Technol., Atlanta, GA, 2004.
93. H. von Stackelberg, Marktform und Gleichgewicht. Vienna, Austria: Julius Springer, 1934.
94. J. G. Webster, Ed., Measurement, Instrumentation and Sensors Handbook. Boca Raton, FL: CRC, 1998.
95. M. P. Henry and D. W. Clark, "The self-validating sensor: rationale definitions and examples," Contr. Eng. Practice, vol. 1, pp. 585-610, 1993.
96. M. J. Leahy, M. P. Henry, and D. W. Clark, "Sensor validation in biomedical applications," Contr. Eng. Practice, vol. 5, pp. 1753-1758, 1997.
97. D. W. Apley and J. Shi, "A GLRT for statistical process control of auto-correlated processes," IIE Trans., vol. 31, pp. 1123-1134, 1999.
98. J. R. English, S. C. Lee, T. W. Martin, and C. Tilmon, "Monitoring time-dependent data with Xbar and EWMA Charts," IIE Trans., vol. 32, pp. 1103-1114, 2000.
99. R. Dorr, F. Kratz, J. Ragot, F. Loisy, and J.-L. Germain, "Detection, isolation, and identification of sensor faults in nuclear power plants," IEEE Trans. Contr. Syst. Technol., vol. 5, no. 1, pp. 42-60, Jan. 1997.
100. R. J. Patton and J. Chen, "Review of parity space approaches to fault diagnosis for aerospace systems," J. Guid., Contr., Dynam., vol. 17, pp. 278-285, 1994.
101. J. Magni and P. Mouyou, "On residual generation by observer and parity space approaches," IEEE Trans. Autom. Contr., vol. 39, no. 2, pp. 441-447, Feb. 1994.
102. M. Basseville and I. V. Nikiforov, Detection of Abrupt Changes: Theory and Application. Upper Saddle River, NJ: Prentice-Hall, 1993.
103. S. S. Iyengar, L. Prasad, and H. Min, Advances in Distributed Sensor Technology. Upper Saddle River, NJ: Prentice-Hall, 1995.
104. I. F. Akyildiz, W. Su, Y. Sankarasubramaniam, and E. Cayirci, "Wireless sensor networks: a survey," Computer Netw., vol. 38, pp. 393-422, 2002.
105. S. T. S. Bukkapatnam, J. M. Nichols, M. Seaver, S. T. Trickey, and M. Hunter, "A wavelet-based, distortion energy approach to structural health monitoring," Struct. Health Monitor. J., vol. 4, no. 3, pp. 247-258, 2005.
106. M. Ettouney, R. Daddazio, and A. Hapij, "Optimal sensor locations for structures with multiple loading conditions," in Proc. Int. Soc. Optical Eng. Conf. Smart Structures and Materials, vol. 3671, 1999, pp. 78-89.
107. C. K. H. Koh, J. Shi, and J. Black, "Tonnage signature attribute analysis for stamping process," NAMRI/SME Trans., vol. 23, pp. 193-198, 1996.
108. J. Jin and J. Shi, "Automatic feature extraction of waveform signals for in-process diagnostic performance improvement," J. Intell. Manuf., vol. 12, pp. 267-268, 2001.
109. _, "Diagnostic feature extraction from stamping tonnage signals based on design of experiment," ASME Trans., J. Manuf. Sci. Eng., vol. 122, no. 2, pp. 360-369, 2000.
110. J. Kim, Q. Huang, J. Shi, and T.-S. Chang, "Online multi-channel forging tonnage monitoring and fault pattern discrimination using principal curve," ASME Trans., J. Manuf. Sci. Eng., 2004.
111. J. Jin and J. Shi, "Press Tonnage Signal decomposition and validation analysis for transfer or progressive die processes," ASME Trans., J. Manuf. Sci. Eng., 2005.
112. J. Jin, "Individual station monitoring using press tonnage sensors for multiple operation stamping processes," ASME Trans., J. Manuf. Sci. Eng., vol. 126, no. 1, pp. 83-90, 2004.
113. P. Tse, L. Qu, and S. Kumara, "An effective and portable electronic ear for fault diagnosis using machine operating sound directly," Int. J. Acoust. Vibr., vol. 6, no. 1, pp. 23-31, 2001.
114. D. W. Apley and Y. Ding, "A characterization of diagnosability conditions for variance components analysis in assembly operations," IEEE Trans. Autom. Sci. Eng., vol. 2, no. 2, pp. 101-110, Apr. 2005.
115. A. Khan and D. Ceglarek, "Sensor optimization for fault diagnosis in multi-fixture assembly systems with distributed sensing," ASME J. Manuf. Sci. Eng., vol. 122, pp. 215-226, 2000.
116. Q. Liu, Y. Ding, and Y. Chen, "Optimal coordinate sensor placements for estimating mean and variance components of variation sources," IIE Trans., vol. 37, no. 9, pp. 877-889, 2005.
117. J. Li and J. Shi, "Knowledge discovery from observational data for process control using causal Bayesian networks," IIE Trans., to be published.
118. J. Kim, Q. Huang, J. Shi, and T.-S. Chang, "On-line multi-channel forging Tonnage monitoring and fault pattern discrimination using principle curves," ASME Trans., J. Manuf. Sci. Eng., to be published.
119. P. Saffo, "Sensors: the next wave of infotech innovation," in Proc. Ten-Year Forecast. Menlo Park. CA, 1997.
120. Comput. Sci. Telecommun. Board of Nat. Res. Council, Washington, D.C., Embedded, Everywhere: A Research Agenda for Networked Systems of Embedded Computers, Nat. Acad. Press, 2001.
121. E. H. Callaway, Wireless Sensor Networks: Architectures and Protocols. Boca Raton, FL: CRC, 2004.