-
1
-
-
0022074551
-
Kinematics Analysis of Workpart Fixturing for Flexible Assembly with Automatically Reconfigurable Fixtures
-
Asada, H., and By, A. B., 1985, “Kinematics Analysis of Workpart Fixturing for Flexible Assembly with Automatically Reconfigurable Fixtures,” IEEE Journal of Robotics and Automation, RA-1(2), pp. 86-93.
-
(1985)
IEEE Journal of Robotics and Automation
, vol.1
, Issue.2
, pp. 86-93
-
-
Asada, H.1
By, A.B.2
-
2
-
-
0028428802
-
Building an Aluminum Car
-
Ashley, S., 1994, “Building an Aluminum Car,” Mechanical Engineering, pp. 65-68.
-
(1994)
Mechanical Engineering
, pp. 65-68
-
-
Ashley, S.1
-
3
-
-
0003456815
-
-
Wiley, New York
-
Bates, D. M., and Watts, D. G., 1988, Nonlinear Regression Analysis and its Applications, Wiley, New York.
-
(1988)
Nonlinear Regression Analysis and Its Applications
-
-
Bates, D.M.1
Watts, D.G.2
-
4
-
-
0003426746
-
-
John Wiley, New York
-
Box, G. E. P., and Draper, N. R., 1987, Empirical Model-Building and Response Surfaces, John Wiley, New York.
-
(1987)
Empirical Model-Building and Response Surfaces
-
-
Box, G.E.P.1
Draper, N.R.2
-
5
-
-
0003465726
-
-
Technical Report SAND93-2028, Sandia National Laboratories
-
Brost, R. C., and Goldberg, K. Y., 1994, “A Complete Algorithm for Designing Modular Fixtures for Polygonal Parts,” Technical Report SAND93-2028, Sandia National Laboratories.
-
(1994)
A Complete Algorithm for Designing Modular Fixtures for Polygonal Parts
-
-
Brost, R.C.1
Goldberg, K.Y.2
-
6
-
-
0003587067
-
-
Wiley, New York
-
Chatteijee, S., and Hadi, A. S., 1988, Sensitivity Analysis in Linear Regression, Wiley, New York.
-
(1988)
Sensitivity Analysis in Linear Regression
-
-
Chatteijee, S.1
Hadi, A.S.2
-
7
-
-
0344685012
-
-
Ph.d. thesis, Carnegie Mellon University, Pittsburgh, PA
-
Choi, W., 1996, Computational Analysis of Three Dimensional Measurement Data, Ph.d. thesis, Carnegie Mellon University, Pittsburgh, PA.
-
(1996)
Computational Analysis of Three Dimensional Measurement Data
-
-
Choi, W.1
-
8
-
-
0024771578
-
A Mathematical Approach to Automated Configuration of Machining Fixtures: Analysis and Synthesis
-
Chou, Y.-C., Chandru, V., and Barash, M. M., 1989, “A Mathematical Approach to Automated Configuration of Machining Fixtures: Analysis and Synthesis,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 111, pp. 299-306.
-
(1989)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.111
, pp. 299-306
-
-
Chou, Y.-C.1
Chandru, V.2
Barash, M.M.3
-
9
-
-
0024013529
-
Automatic Sensor Placement for Vision Task Requirements
-
Cowan, C. K., and Kovesi, P. D., 1988, “Automatic Sensor Placement for Vision Task Requirements,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 10, pp. 407-416.
-
(1988)
IEEE Transactions on Pattern Analysis and Machine Intelligence
, vol.10
, pp. 407-416
-
-
Cowan, C.K.1
Kovesi, P.D.2
-
10
-
-
0028424706
-
Restraint Analysis of Fixtures Which Rely on Surface Contact
-
DeMeter, E. C., 1994, “Restraint Analysis of Fixtures Which Rely on Surface Contact,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 116, No. 2, pp. 207-215.
-
(1994)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.116
, Issue.2
, pp. 207-215
-
-
Demeter, E.C.1
-
11
-
-
0009443673
-
Tolerance Verification through Manufactured Part Modeling
-
Etesami, F., 1988, “Tolerance Verification through Manufactured Part Modeling,” ASME Journal of Manufacturing Systems, Vol. 7, No. 3, pp. 223-232.
-
(1988)
ASME Journal of Manufacturing Systems
, vol.7
, Issue.3
, pp. 223-232
-
-
Etesami, F.1
-
12
-
-
0029304561
-
Two approaches to Optimal Sensor Locations
-
Fadale, T. D., Nenarokomov, A. V., and Emery, A. F., 1995, “Two approaches to Optimal Sensor Locations,” ASME Journal of Heat Transfer, Vol. 117, pp. 373-379.
-
(1995)
ASME Journal of Heat Transfer
, vol.117
, pp. 373-379
-
-
Fadale, T.D.1
Nenarokomov, A.V.2
Emery, A.F.3
-
14
-
-
8744260477
-
-
Ph.d. thesis, University of Maryland Baltimore County, Baltimore, MD
-
Gupta, S., 1997, Manufactured Part Modeling for Automotive Spaceframe Extrusions, Ph.d. thesis, University of Maryland Baltimore County, Baltimore, MD.
-
(1997)
Manufactured Part Modeling for Automotive Spaceframe Extrusions
-
-
Gupta, S.1
-
15
-
-
84948783167
-
The Hat Matrix in Regression and Anova
-
Hoaglin, D. C., and Welsch, R. E., 1978, “The Hat Matrix in Regression and Anova,” The American Statistician, Vol. 32, No. 1, pp. 17-22.
-
(1978)
The American Statistician
, vol.32
, Issue.1
, pp. 17-22
-
-
Hoaglin, D.C.1
Welsch, R.E.2
-
16
-
-
0026120060
-
Sensor Placement for On-orbit Modal Identification and Correlation of Large Space Structures
-
Kammer, D. C., 1991, “Sensor Placement for On-orbit Modal Identification and Correlation of Large Space Structures,” Journal of Guidance, Vol. 14, No. 2, pp. 251-259.
-
(1991)
Journal of Guidance
, vol.14
, Issue.2
, pp. 251-259
-
-
Kammer, D.C.1
-
17
-
-
0026927245
-
Effects of Noise on Sensor Placement for On-orbit Modal Identification of Large Space Structures
-
Kammer, D. C., 1992, “Effects of Noise on Sensor Placement for On-orbit Modal Identification of Large Space Structures,” ASME Journal of Dynamics, Systems, Measurements, and Control, Vol. 114, pp. 436-443.
-
(1992)
ASME Journal of Dynamics, Systems, Measurements, and Control
, vol.114
, pp. 436-443
-
-
Kammer, D.C.1
-
18
-
-
0029425589
-
An Optimal Sensor Location Methodology for Fixture Fault Diagnosis
-
MED-Vol. 2-2/MH-Vol. 3-2
-
Khan, A., Ceglarek, D., Shi, J., and Ni, J., 1995, “An Optimal Sensor Location Methodology for Fixture Fault Diagnosis,” ASME Journal of Manufacturing Science and Engineering, pp. 1165-1176, MED-Vol. 2-2/MH-Vol. 3-2.
-
(1995)
ASME Journal of Manufacturing Science and Engineering
, pp. 1165-1176
-
-
Khan, A.1
Ceglarek, D.2
Shi, J.3
Ni, J.4
-
19
-
-
13544258002
-
-
Master’s thesis, University of Maryland, Department of Mechanical Engineering, College Park, Maryland 20742
-
Nagarkar, S. R., 1997, Locator and Sensor Placement in Automated Coordinate Checking Fixtures, Master’s thesis, University of Maryland, Department of Mechanical Engineering, College Park, Maryland 20742.
-
(1997)
Locator and Sensor Placement in Automated Coordinate Checking Fixtures
-
-
Nagarkar, S.R.1
-
21
-
-
0026112872
-
Localization of 3-d Objects Having Complex Sculptured Surfaces Using Tactile Sensing and Surface Description
-
Sahoo, K. C., and Menq, C.-H., 1991, “Localization of 3-d Objects Having Complex Sculptured Surfaces Using Tactile Sensing and Surface Description,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 113, pp. 85-92.
-
(1991)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.113
, pp. 85-92
-
-
Sahoo, K.C.1
Menq, C.-H.2
-
22
-
-
0040364221
-
-
Transactions of NAMRl/SME 23
-
Stelson, K. A., and Lou, H., 1995, “Tolerance Analysis of Three-dimensional Tube Bending: Worst Case and Statistical Methods,” Transactions of NAMRl/SME 23, pp. 293-298.
-
(1995)
Tolerance Analysis of Three-Dimensional Tube Bending: Worst Case and Statistical Methods
, pp. 293-298
-
-
Stelson, K.A.1
Lou, H.2
-
23
-
-
13544269509
-
Planning Frictionless, Self-adjusting, Enveloping Grasps
-
Osaka, Japan
-
Trinkle, J. C., 1986, “Planning Frictionless, Self-adjusting, Enveloping Grasps,” Proceedings of Japan-U.S.A. Symposium on Flexible Automation, Osaka, Japan, pp. 401-404.
-
(1986)
Proceedings of Japan-U.S.A. Symposium on Flexible Automation
, pp. 401-404
-
-
Trinkle, J.C.1
-
24
-
-
0030674324
-
Optimal Sensor Location Design in Automated Coordinate Checking Fixtures
-
Marina del Rey, CA
-
Wang, Y., and Nagarkar, S., 1997, “Optimal Sensor Location Design in Automated Coordinate Checking Fixtures,” Proceedings of 1997 IEEE International Symposium on Assembly and Task Planning, Marina del Rey, CA, pp. 140-145.
-
(1997)
Proceedings of 1997 IEEE International Symposium on Assembly and Task Planning
, pp. 140-145
-
-
Wang, Y.1
Nagarkar, S.2
-
25
-
-
0029425521
-
Manufactured Part Modeling for Characterization of Geometric Errors of Aluminium Automotive Space-Frames
-
Wang, Y., Gupta, S., Hulting, F., and Fussell, P., 1995, “Manufactured Part Modeling for Characterization of Geometric Errors of Aluminium Automotive Space-Frames,” JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING, Vol. 2, pp. 1051-1063.
-
(1995)
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING
, vol.2
, pp. 1051-1063
-
-
Wang, Y.1
Gupta, S.2
Hulting, F.3
Fussell, P.4
|