Can the conventional high-cycle multiaxial fatigue criteria be re-interpreted in terms of the Theory of Critical Distances?

SDHM Structural Durability and Health Monitoring

Volumn 2, Issue 2, 2006, Pages 91-108

  Susmel, L ^a,b   Taylor, D ^b  

^a UNIVERSITY OF FERRARA   (Italy)

^b TRINITY COLLEGE DUBLIN   (Ireland)

Author keywords

Linear elastic fracture mechanics; Multiaxial fatigue; Theory of Critical Distances

Indexed keywords

CRACKS; CURVE FITTING; FRACTURE MECHANICS; MATHEMATICAL MODELS; STRESS CONCENTRATION; STRUCTURAL LOADS;

LINEAR ELASTIC FRACTURE MECHANICS; MULTIAXIAL FATIGUE; THEORY OF CRITICAL DISTANCES;

FATIGUE OF MATERIALS;

EID: 33748788519     PISSN: 19302983     EISSN: 19302991     Source Type: Journal    
DOI: None     Document Type: Article

References (49)

1. Atzori, B., Lazzarin, P., Meneghetti, G. (2005): A unified treatment of the mode I fatigue limit of components containing notches or defects. Int. J. Fracture 133, pp. 61-87.
2. Atzori, B., Lazzarin, P., Tovo, R. (1999): Stress field parameters to predict the fatigue strength of notched components. Journal of Strain Analysis for Engineering Components 34, pp. 437-453.
3. Atzori, B., Meneghetti, G., Susmel, L. (2005) Material fatigue properties for assessing mechanical components weakened by notches and defects. Fatigue Fract. Engng. Mater. Struct. 28, pp. 93-97.
4. Ballard, P., Dang Van, K., Deperrois, A., Papdopoulos, I. V. (1995): High-Cycle Fatigue and Finite Element Analysis. Fatigue Fract. Engng Mater. Struct. 18, pp. 397-411.
5. Crossland, B. (1956): Effect of large hydrostatic pressure on the torsional fatigue strength of an alloy steel. In Proc. Int. Conf. on Fatigue of Metals, Institution of Mechanical Engineers, London, pp. 138-149.
6. Dang Van, K. (1973): Sur la resistance à la fatigue des mètaux. Sciences Techniques de l'Armement 47, 3éme fascicule, Mémorial de l'Artillerie Francaise, Paris, Imprimerie Nationale.
7. Dang Van, K., Cailletaud, G., Flavenot, J. F., Le Douaron, A., Lieurade, H. P. (1989): Criterion for High-Cycle Fatigue Failure under Multiaxial Loading. In Biaxial and Multiaxial Fatigue, Edited by M. W. Brown and K. J. Miller, Mechanical Engineering Publications, London, pp. 459-478.
8. Dang Van, K., Griveau, B., Mesagge, O. (1989): On a new multiaxial fatigue limit criterion: theory and applications. In Biaxial and Multiaxial Fatigue, Edited by M. W. Brown and K. J. Miller, Mechanical Engineering Publications, London, pp. 479-496.
9. Dunn, M. L., Suwito, W., Cunningham, S. (1997) Stress intensities at notch singularities. Engng Fract. Mech. 57, pp. 417-430.
10. DuQuesnay, D. L., Yu, M., Topper, T.H. (1988): An analysis of notch size effect on the fatigue limit. J. Testing Eval. 4, pp. 375-385.
11. El Haddad, M. H., Dowling, N. F., Topper, T. H., Smith, K. N. (1980): J-integral applications for short fatigue cracks at notches. Int. J. Fract. 16, pp. 15-24.
12. Endo, M., Murakami, Y. (1987): Effect of an artificial small defect on torsional fatigue strength of steels. J. Engng. Mater. Tech. (ASME Trans.) 109, pp. 124-129.
13. Findley, W. N. (1959): A theory for the effect of mean stress on fatigue under combined torsion and axial load or bending. Trans ASME Ser. B 81, pp. 301-306.
14. Frost, N. E., Marsh, K. J., Pook, L. P. (1974): Metal Fatigue, Oxford University Press.
15. Fuchs, H. O., Stephens, R. I. (1980): Metal fatigue in Engineering. John Wiley and Sons, New York.
16. Gough, H. J. (1949): Engineering Steels under Combined Cyclic and Static stresses. In Proc. Inst. Mech. Engrs. 160, pp. 17-440.
17. Gross, R., Mendelson, A. (1972): Plane elastostatic analysis of V-notched plates. Int. J. Fracture Mechanics 8, pp. 267-276.
18. Kurath, P., Downing, S. D., Galliart, D. R. (1989): Summary of Non-Hardened Notched Shaft Round Robin Program. In Multiaxial Fatigue, Edited by G. E. Leese and D. F. Socie. Society of Automotive Engineers, AE-14, 13-32.
19. Lazzarin, P., Susmel, L. (2003): A Stress-Based Method to Predict Lifetime under Multiaxial Fatigue Loadings. Fatigue Fract. Engng. Mater. Struct. 26, pp. 1171-1187.
20. Lazzarin, P., Tovo, R. (1996): A unified approach to the evaluation of linear elastic stress fields in the neighbourhood of cracks and notches. Int. J. Fracture 78, pp. 3-19.
21. Lemaitre, J., Chaboche, J. L. (1990): Mechanics of solid materials. Cambridge University Press, Cambridge.
22. Matake, T. (1977): An Explanation on fatigue limit under combined stress. Bulletin of JSME 20, pp. 257-263.
23. McDiarmid, D. L. (1991) A general criterion for high-cycle multiaxial fatigue failure. Fatigue Fract. Engng Mater. Struct. 14, pp. 429-453.
24. McDiarmid, D. L. (1994): A shear stress based critical-plane criterion of multiaxial fatigue failure for design and life prediction. Fatigue Fract. Engng Mater. Struct. 17, pp. 1475-1484.
25. Papadopoulos I. V. (1987): Fatigue polycyclique des métaux: une nouvelle aprroche. Thèse de Doctorat, Ecole Nationale des Ponts and Chaussées, Paris Frane.
26. Papadopoulos, I. V. (1995) A High-Cycle Fatigue Criterion applied in Biaxial and Triaxial Out-of-Phase stress conditions. Fatigue Fract. Engng Mater. Struct. 18, pp. 79-91.
27. Papdopoulos, I.V. (1997): A review of multiaxial fatigue limit criteria. Notes of the CISM course. Udine (Italy), September 1997.
28. Papadopoulos, I. V. (1998): Critical Plane Approaches in High-Cycle Fatigue: on the Definition of the Amplitude and Mean Value of the Shear Stress acting on the Critical Plane. Fatigue Fract. Engng Mater. Struct. 21, pp. 269-285.
29. Papadopoulos, I. V., Davoli, P., Gorla, C., Filippini, M. Bernasconi, A. (1997): A comparative study of multiaxial high-cycle fatigue criteria for metals. Int. J. Fatigue 19, pp. 219-235.
30. Petrone, N., Susmel, L. (1999): Analisi comparativa di criteri di resistenza a fatica pluriassiale per vita infinita. In Proceedings of XXVIII AIAS National Conference, Edited by B. Atzori et al. Vicenza (Italy), September 1999, pp. 239-250.
31. Qian J., Hasebe N. (1997): Property of eigenvalues and eigenfunction for an interface V-notch in antiplane elasticity. Engng Fract. Mech. 56, pp. 729-734.
32. Sines, G. (1959) Behaviour of metals under complex static and alternating stress. In: Metal Fatigue, Edited by G. Sines and J. L. Waisman, McGraw Hill, New York, 145-159.
33. Socie, D.F., Marquis, G. B. (2000): Multiaxial Fatigue, SAE.
34. Sonsino, C. M. (1994): Fatigue Behaviour of Welded Components Under Complex Elasto-Plastic Multiaxial Deformation. In LBF-Bericht Nr. 6078.
35. Susmel, L. (2004): A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings. Fatigue Fract. Engng. Mater. Struct. 27, pp. 391-411.
36. Susmel, L., Lazzarin, P. (2002): A Bi-Parametric Modified Wöhler Curve for High Cycle Multiaxial Fatigue Assessment. Fatigue Fract. Engng Mater. Struct. 25, pp. 63-78.
37. Susmel, L., Taylor, D. (2003a): Fatigue Design in the Presence of Stress Concentrations. Int. J. of Strain Analysis 38, pp. 443-452.
38. Susmel, L., Taylor, D. (2003b): Two methods for predicting the multiaxial fatigue limits of sharp notches. Fatigue Fract. Engng. Mater. Struct. 26, pp. 821-833.
39. Susmel, L., Taylor, D. (2006): A simplified approach to apply the theory of critical distances to notched components under torsional fatigue loading. Int. J. Fatigue 28, pp. 417-430.
40. Susmel, L., Tovo, R., Lazzarin, P. (2005): The mean stress effect on the high-cycle fatigue strength from a multiaxial fatigue point of view. Int. J. Fatigue 27, pp. 928-943.
41. Tanaka, K., Nakai, Y. (1983): Propagation and non-propagation of short fatigue cracks at a sharp notch. Fatigue Fract. Engng. Mater. Struct. 6, 315-327.
42. Tanaka, K., Akiniwa, Y. (1987): Notch geometry effect on propagation threshold of short fatigue cracks in notched components. In: Fatigue '87, Vol. II, Edited by R. O. Ritchie and E. A. Starke Jr., 3th Int. Conf. on Fatigue and Fracture Thresholds, 739-748.
43. Taylor, D. (1999): Geometrical effects in fatigue: a unifying theoretical model. Int. J. Fatigue 21, pp. 413-420.
44. Taylor, D., Barrett, N., Lucano, G. (2002): Some new methods for predicting fatigue in welded joints. Int. J. Fatigue 245, pp. 509-518
45. Taylor, D., Bologna, P., Bel Knani, K. (2000): Prediction of fatigue failure location on a component using a critical distance method. Int. J. Fatigue 22, pp. 735-742.
46. Taylor, D., Wang, G. (2000): The validation of some methods of notch fatigue analysis. Fatigue Fract. Engng. Mater. Struct. 23, pp. 387-394.
47. Tipton, S. M., Nelson, D. V. (1997): Advances in multiaxial fatigue life prediction for components with stress concentration. Int. J. Fatigue 19, pp. 503-515.
48. Williams, M. L. (1952): Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J. Appl. Mechanics 19, pp. 526-528.
49. You, B.R., Lee, S.B. (1996): A critical review on multiaxial fatigue assessments of metals. Int. J. Fatigue 18, pp. 235-244.