A stress-based method to predict lifetime under multiaxial fatigue loadings

Fatigue and Fracture of Engineering Materials and Structures

Volumn 26, Issue 12, 2003, Pages 1171-1187

  Lazzarin, P ^a   Susmel, L ^b  

^a UNIVERSITY OF PADOVA   (Italy)

^b UNIVERSITY OF FERRARA   (Italy)

Author keywords

Cyclic deformation in single crystals; Multiaxial fatigue; Multiaxial fatigue strength reduction factor; Notch

Indexed keywords

CRACK INITIATION; DEFORMATION; MICROCRACKS; SHEAR STRESS; SINGLE CRYSTALS; STRENGTH OF MATERIALS;

MULTIAXIAL FATIGUE LOADINGS; STRESS EFFECT;

FATIGUE OF MATERIALS;

EID: 0141537754     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1460-2695.2003.00723.x     Document Type: Article

References (43)

1. You, B. R. and Lee, S. B. (1996) A critical review on multiaxial fatigue assessments of metals. Int. J. Fatigue 18, 235-244.
2. Socie, D. F. and Marquis, G. B. (2000) Multiaxial Fatigue Society of Automotive Engineers, Inc., Worrendale, PA.
3. Brown, M. W. and Miller, K. J. (1973) A theory for fatigue under multiaxial stress-strain conditions. Proc. Inst. Mech. Eng. 187, 745-755.
4. Socie, D. F. (1987) Multiaxial fatigue damage models. Trans. ASME, J. Engng Mater. Technol. 109, 293-298.
5. Fatemi, A. and Socie, D. F. (1988) A critical plane approach to multiaxial fatigue damage including out-of-phase loading. Fatigue Fract. Engng Mater. Struct. 11, 149-165.
6. Ellyin, F. and Golos, K. and Xia, Z. (1991) In-phase and out-of-phase multiaxial fatigue. Trans. ASME, J. Engng Mater. Technol. 113, 112-118.
7. Ellyin, F. and Xia, Z. (1993) A general fatigue theory and its application to out-of-phase cyclic loading. Trans. ASME J. Engng Mater. Technol. 115, 411-416.
8. Susmel, L. (2000) Comparazione quantitativa di criteri di resistenza a fatica multiassiale per vita a termine. In: Proceedings of XXX AIAS Conference, Lucca, Italy (in Italian) pp. 425-430.
9. Dang Van, K. (1993) Macro-micro approach in high-cycle multiaxial fatigue. In: Advance in Multi-Axial Fatigue, ASTM STp 1191 (edited by D. L. McDowell and R. Ellis). American Society for Testing Materials, Philadelphia, PA, pp. 120-130.
10. Papadopoulos, I. V. (1995) A high-cycle fatigue criterion applied in biaxial and triaxial out-of-phase stress conditions. Fatigue Fract. Engng Mater. Struct. 18, 79-91.
11. McDiarmid, D. L. (1994) A shear stress based critical-plane criterion of multiaxial fatigue failure for design and life prediction. Fatigue Fract. Engng Mater. Struct., 17, 1475-1484.
12. Carpinteri, A. and Spagnoli, A. (2001) Multiaxial high-cycle fatigue criterion for hard metals. Int. J. Fatigue 23, 135-145.
13. Carpinteri, A., Brighenti, R. and Spagnoli, A. (2000) A fracture plane approach in multiaxial high-cycle fatigue of metals. Fatigue Fract. Engng Mater. Struct. 23, 355-364.
14. Susmel, L. and Lazzarin, P. (2002) A bi-parametric Wöhler curve for high cycle multiaxial fatigue assessment. Fatigue Fract. Engng Mater. Struct. 25, 63-78.
15. Suresh, S. (1991) Fatigue of Materials. Cambridge University Press, Cambridge.
16. Papadopoulos, I. V. (1997) Exploring the high-cycle fatigue behaviour of metals from the mesoscopic scale. In: Advanced Course on High-Cycle Metal Fatigue (Edited by K. Dang Van and I. V. Papadopoulos). CISM, Udine, Italy.
17. Ellyin, F. (1997) Fatigue Damage Crack Growth and Life Prediction. Chapman & Hall. Printed in Great Britain by St Edmundsbury Press Limited.
18. Papadopoulos, I. V. (1998) Critical plane approaches in high-cycle fatigue: On the definition of the amplitude and mean value of the shear stress acting on the critical plane. Fatigue Fract. Engng Mater. Struct. 21, 269-285.
19. Socie, D., Kurath, P. and Koch, J. (1978) A multiaxial fatigue damage parameter. In: Biaxial and Multiaxial Fatigue. EGF 3 (Edited by M. W. Brown and K. J. Miller). Mechanical Engineering Publications, London, pp. 535-550.
20. Socie, D. F., Waill, L. A. and Dittmer, D. F. (1985) Biaxial fatigue of inconel 718 including mean stress effects. In: Multiaxial Fatigue, ASTM STP 853 (Edited by K. J. Miller and M. W. Brown). American Society for Testing and Materials, Philadelphia, PA. pp. 463-481.
21. de Freitas, M., Li, B. and Santos, J. L. T. (2000) A numerical approach for high-cycle fatigue life prediction with multiaxial loading. In: Multiaxial Fatigue and Deformation: Testing and Prediction. ASTM STP 12387 (Edited by S. Kalluri and P. J. Bonacuse). American Society for Testing and Materials, West Conshohocken, PA, pp. 139-156.
22. Li, B., Santos, J. L. T. and de Freitas, m. (2001) A computerized procedure for long-life fatigue assessment under complex multiaxial loading. Fatigue Fract. Engng Mater. Struct. 24, 165-177.
23. Atzori, B. and Susmel, L. (1999) Un DataBase di fatica multiassiale come strumento di supporto alla ricerca scientifica. In: Proceedings of XXIX AIAS Conference (Edited by b. Atzori, P. Lazzarin, N. Petrone and M. Quaresimin). Vicenza, Italy, pp. 229-238 (in Italian).
24. Fatemi, A. and Stephens, R. I. (1989) Biaxial fatigue of 1045 steel under in-phase and 90 deg out-of-phase loading conditions. In: Multiaxial Fatigue-Analysis and Experiments (Edited by D. F. Socie and G. E. Leese). Society of Automotive Engineers, AE-14, pp. 121-137.
25. Kurath, P., Downing, S. D. and Galliart, D. R. (1989) Summary of non-hardened notched shaft round robin program. In: Multiaxial Fatigue-Analysis and Experiments (Edited by D. F. Socie and G. E. Leese). Society of Automotive Engineers, AE-14, pp. 13-32.
26. Xia, Z. and Ellyin, F. (1998) Multiaxial fatigue of an alumina particle reinforced aluminum alloy. Int. J. Fatigue 20, 51-56.
27. Jiang, Y. and Sehitoglu, H. (1996) Modelling of cyclic ratchetting plasticity, Part I: development and constitutive relations. Trans. ASME, J. Appl. Mech. 63, 720-725.
28. Jiang, Y. and Sehitoglu, H. (1996) Modelling of cyclic ratchetting plasticity, Part II: Comparison of model simulations with experiments. Trans. ASME, J. Appl. Mech. 63, 726-733.
29. Petrone, N. (1996) Metodologie di progettazione a fatica per componenti soggetti a sollecitazioni pluriassiali. Ph.D. Thesis, University of Padova (in Italian).
30. Kim, K. S., Park, J. and Clee, J. W. (1999) Multiaxial fatigue under variable amplitude loads. Trans. ASME, J. Engng Mater. Technol. 121, 286-293.
31. Chaudonneret, M. (1993) A simple and efficient multiaxial fatigue damage model for engineering applications of macro-crack initiation. Trans. ASME, J. Engng Mater. Technol. 115, 373-379.
32. Lee, S. B. (1985) A criterion for fully reversed out-of-phase torsion and bending. In: Multiaxial Fatigue, ASTM STP 853 (Edited by K. J. Miller and M. W. Brown). American Society for Testing and Materials, Philadelphia, pp. 553-568.
33. Lin, H., Nayeb-Hashemi, H. and Pelloux, R. M. (1991) A multiaxial fatigue damage model for orthotropic materials under proportional loading. Fatigue Fract. Engng Mater. Struct. 16, 723-742.
34. Park, J., Nelson, D. and Rostami, A. (2001) Small crack growth in combined bending-torsion fatigue of A533B steel. Fatigue Fract. Engng Meter. Struct. 24, 179-191.
35. Gasiak, G. and Pawliczek, R. (2001) The mean loading effect under cyclic bending and torsion of 18G2A steel. In: Proceedings of 6th International Conference on Biaxial/Multiaxial Fatigue & Fracture, Lisbon, Portugal, June 2001, pp. 213-222.
36. Sines, G. (1961) The prediction of fatigue fracture under combined stresses at stress concentrations. Bull. Japan Soc. Mech. Eng. 15, 443-453.
37. Kaufman, R. P. and Topper, T. H. (2001) The effects of mean stresses normal to the maximum shear planes in multiaxial fatigue. In: Proceedings of 6th International Conference on Biaxial/Multiaxial Fatigue & Fracture, (Edited by M. de Freitas). Lisbon, Portugal, pp. 203-212.
38. Yip, M. C. and Jen, Y. M. (1997) Mean stress effect on crack initiation lives for notched specimen under biaxial nonproportional loading path. Trans. ASME, J. Engng Mater. Technol. 119, 104-112.
39. Quilafku, G., Kadi, N., Dobranski, J., Azari, Z., Gjonaj, M. and Pluvinage, G. (2001) Fatigue specimens subjected to combined loading. Role of hydrostatic pressure. Int. J. Fatigue 23, 689-701.
40. Yip, M. C. and Jen, Y. M. (1996) Biaxial fatigue crack initiation life prediction of solid cylindrical specimens with transverse circular holes. Int. J. Fatigue 18, 111-117.
41. Smith, R. A. and Miller, K. J. (1978) Prediction of fatigue regimes in notched components. Int. J. Mech. Sci. 20, 201-206.
42. Gough, H. J. (1949) Engineering steels under combined cyclic and static stresses. Proc. Inst. Mech. Engrs 160, 417-440.
43. Frith, P. H. (1956) Fatigue of wrought high-tensile alloy steel. In: Proceedings of International Conference on Fatigue. Institute of Mechanical Engrineers, pp. 462-499.