Stress field parameters to predict the fatigue strength of notched components

Journal of Strain Analysis for Engineering Design

Volumn 34, Issue 6, 1999, Pages 437-453

  Atzori, B ^a   Lazzarin, P ^b   Tovo, R ^b  

^a UNIVERSITY OF PADOVA   (Italy)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; CRACK PROPAGATION; ELASTICITY; FAILURE ANALYSIS; FATIGUE OF MATERIALS; STRENGTH OF MATERIALS; STRESS ANALYSIS; STRESS CONCENTRATION; STRESS INTENSITY FACTORS; WELDS;

NOTCHED COMPONENTS;

STRAIN;

EID: 0033365106     PISSN: 03093247     EISSN: None     Source Type: Journal    
DOI: 10.1243/0309324991513876     Document Type: Article

References (67)

1. Williams, M. L. Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J. Appl. Mechanics, 1952, 19, 526-528.
2. Bogy, D. B. Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading. J. Appl. Mechanics, 1968, 35, 460-466.
3. Bogy, D. B. Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions. J. Appl. Mechanics, 1971, 38, 377-386.
4. England, A. H. On stress singularities in linear elasticity. Int. J. Engng Sci., 1971, 9, 571-585.
5. Kelly, P. A., Hills, D. A. and Nowell, D. The design of joints between elastically dissimilar components. J. Strain Analysis, 1992, 27, 15-20.
6. Gross, R. and Mendelson, A. Plane elastostatic analysis of V-notched plates. Int. J. Fracture Mechanics, 1972, 8(3), 267-276.
7. Carpenter, W. C. A collocation procedure for determining fracture mechanics parameters at a corner. Int. J. Fracture, 1984, 24, 255-266.
8. Carpenter, W. C. Mode I and mode II stress intensities for plates with cracks of finite opening. Int. J. Fracture, 1984, 26, 201-214.
9. Chen, D. H. and Nisitani, H. Singular stress field near the corner of jointed dissimilar materials. J. Appl. Mechanics, 1993, 60, 607-613.
10. Chen, D. H. Stress intensity factors for V-notched strip under tension or in-plane bending. Int. J. Fracture, 1995, 70, 81-97.
11. Akisanya, A. R. On the singular stress field near the edge of bonded joints. J. Strain Analysis, 1997, 32, 301-311.
12. Sinclair, G. B., Okajima, M. and Griffin, J. H. Path independent integral for computing stress intensity at sharp notches in elastic strip. Int. J. Numer. Meth. Engng, 1984, 20, 999-1008.
13. Sinclair, G. B. A remark on the determination of mode I and mode II stress intensity factors for sharp re-entrant corners. Int. J. Fracture, 1985, 27, R81-R85.
14. Atkinson, C., Bastero, J. M. and Martinez-Esnada, J. M. Stress analysis in sharp angular notches using auxiliary fields. Engng Fracture Mechanics, 1988, 31, 637-646.
15. Hyde, T. H. and Sun, W. Stress singularities at the free surface of an axisymmetric two-material creep test specimen. J. Strain Analysis, 1997, 32(2), 107-117.
16. Gradin, P. A. A fracture criterion for edge-bonded bi-material bodies. J. Composite Mater., 1982, 16, 448-456.
17. Reedy Jr, E. D. Intensity of stress singularity at the interface-corner between a bonded elastic and rigid layer. Engng Fracture Mechanics, 1990, 36, 575-583.
18. Reedy Jr, E. D. Asymptotic interface-corner solutions for butt tensile joints. Int. J. Solids Structs, 1993, 30, 767-777.
19. Reedy Jr, E. D. and Guess, T. R. Comparison of butt tensile strength data with interface corner stress intensity factor prediction. Int. J. Solids Structs, 1993, 30, 2929-2936.
20. Carpinteri, A. Stress singularity and generalised fracture toughness at the vertex of re-entrant corners. Engng Fracture Mechanics, 1987, 26, 143-155.
21. Knesl, Z. A criterion of V-notch stability. Int. J. Fracture, 1991, 48, R79-R83.
22. Nui, L. S., Chehimi, C. and Pluvinage, G. Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor (NSIF) to the fracture toughness of very brittle materials. Engng Fracture Mechanics, 1994, 49, 325-335.
23. Seweryn, A. Brittle fracture criterion for structures with sharp notches. Engng Fracture Mechanics, 1996, 47, 673-681.
24. Fett, T. Failure of brittle materials near stress singularities. Engng Fracture Mechanics, 1996, 53, 518-551.
25. Dunn, M. L., Suwito, W. and Cunningham, S. J. Fracture initiation at sharp notches: correlation using critical stress intensities. Int. J. Solids Structs, 1997, 34, 3873-3883.
26. Dunn, M. L., Suwito, W., Cunningham, S. J. and May, C. W. Fracture initiation at sharp notches under mode I, mode II, and mild mixed mode loading. Int. J. Fracture, 1997, 84, 367-381.
27. Dunn, M. L., Suwito, W., Cunningham, S. J. and May, C. W. Stress intensities at notch singularities. Engng Fracture Mechanics, 1997, 57, 417-430.
28. Atzori, B. Notch effect or linear elastic fracture mechanics in fatigue design (in Italian). In Proceedings of the 13th AIAS Conference, Bergamo, Italy, 1985, pp. 294-307.
29. Atzori, B. and Pappalettere, C. A method for the evaluation of the fatigue strength of mechanical structures with sharp notches is applied to the design of a single lap joint using numerical and experimental techniques. In Proceedings (Supplementary Papers) of the International Conference on Fatigue of Engineering Materials and Structures, Sheffield 1986, pp. 1-6.
30. Lazzarin, P. Influence of welded joints geometry on the stress field present in the highly stressed zones (in Italian). Riv. Ital. Saldatura, 1986, 2, 107-116.
31. Lazzarin, P. and Santanera, A. A parametric analysis of stress concentrations due to longitudinal stiffeners (in Italian). In Proceedings of the 14th AIAS National Conference, Catania, Italy, 1986, pp. 413-427.
32. Atzori, B., Lazzarin, P. and Stacco, E. Effect of spot welded distribution characteristics on the fatigue strength of resistance welded joints. Welding Int., 1988, 2(8), 707-712.
33. Lazzarin, P. and Andreazza, R. Stress distribution in L-shaped butt joint: welded or bonded. Theor. Appl. Fracture Mechanics, 1989, 12, 189-193.
34. Demelio, G. and Pappalettere, C. Sharp V-notches subjected to axial and shear stresses. In Applied Stress Analysis (Eds T. H. Hyde and E. Ollerton), 1990, pp. 711-718 (Elsevier Applied Science, London).
35. Demelio, G. and Pappalettere, C. Stress field near sharp notches. J. Mater. Processing Technology, 1992, 32, 155-160.
36. Boukharouba, T., Tamine, T., Nui, L., Chehimi, C. and Pluvinage, G. The use of notch stress intensity factor as a fatigue crack initiation parameter. Engng Fracture Mechanics, 1995, 52, 503-512.
37. Verreman, Y. and Nie, B. Early development of fatigue cracking at manual fillet welds. Fatigue Fracture Engng Mater. Structs, 1996, 19, 669-681.
38. Kihara, S. and Yoshi, A. A strength evaluation method of a sharply notched structure by a new parameter 'the equivalent stress intensity factor'. Japan Soc. Mech. Engrs Int. J., 1991, 34, 70-75.
39. Lazzarin, P. and Tovo, R. A notch stress intensity factor approach to the stress analysis of welds. Fatigue Fracture Engng Mater. Structs, 1998, 21, 1089-1104.
40. Lazzarin, P. and Tovo, R. A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches. Int. J. Fracture, 1996, 78, 3-19.
41. Atzori, B., Lazzarin, P. and Tovo, R. Stress distribution for V-shaped notches under tensile and bending loading. Fatigue Fracture Engng Mater. Structs, 1997, 20, 1083-1092.
42. Glinka, G. Energy density approach to calculation of inelastic strain-stress near notches and cracks. Engng Fracture Mechanics, 1985, 22, 485-508.
43. Lazzarin, P., Tovo, R. and Filippi, S. Stress distribution in finite size plates with edge notches. Int. J. Fracture, 1998, 91, 249-262.
44. Lazzarin, P., Tovo, R. and Meneghetti, G. Fatigue crack initiation and propagation phases near notches in metals with low notch sensitivity. Int. J. Fatigue, 1997, 19, 647-665.
45. Frost, N. E., Marsh, K. J. and Pook, L. P. Metal Fatigue, 1974 (Clarendon, Oxford).
46. f. Int. J. Fatigue, 1995, 17, 245-251.
47. Sähn, S., Schaper, M., Pham, V. B., Wurm, B., Husert, Th., Winschuh, E. and Jaeger, G. Damage evolution ahead of sharp notches under cyclic loading. Nucl. Engng Des., 1996, 165, 1-14.
48. El Haddad, M. H., Topper, T. H. and Smith, K. N. Prediction of non-propagating cracks. Engng Fracture Mechanics, 1979, 11, 573-584.
49. Taylor, D. Geometrical effects in fatigue: a unifying theoretical model. Int. J. Fatigue, 1999, 21, 413-420.
50. Noda, N. A., Nisitani, H., Harada, S. and Takase, Y. Fatigue strength of notched specimens having nearly equal sizes of ferrite. Int. J. Fatigue, 1995, 17, 237-244.
51. Metals Handbook, Vol. 19, Fatigue and Fracture (Ed. S. R. Lampman), 1996 (American Society of Metals, Metals Park, Ohio).
52. Pluvinage, G. Rupture and fatigue initiated from notches. Application of notch intensity factor. Rev. Fr. Mecanique, 1997, (1997-1), 53-61.
53. Atzori, B., Lazzarin, P. and Tovo, R. From local stress approach to fracture mechanics: a comprehensive evaluation of fatigue strength of welded joints. Fatigue Fracture Engng Mater. Structs, 1999, 22(5), 369-382.
54. Maddox, S. J. The Effect of Plate Thickness on the Fatigue Strength of Fillet Welded Joints, 1987 (Abington Publishing, Abington, Cambridge).
55. Gurney, T. R. The Fatigue Strength of Transverse Fillet Welded Joints, 1991 (Abington Publishing, Abington, Cambridge).
56. Kihl, D. P. and Sarkani, S. Thickness effects on the fatigue strength of welded steel cruciforms. Int. J. Fatigue, 1997, 19, Suppl. 1, S311-S316.
57. Haibach, E. Abhängigkeit der ertragbaren Spannungen schwingbeanspruchter Schweissverbindungen von Beanspruchungskollektiv. Fraunhofer-Institut für Betriebsfestigkeit LBF Bericht, FB-79, 1968.
58. Bueckner, H. F. A novel principle for the computation of stress intensity factors. Z. Angew. Math. Mechanik, 1970, 50, 529-546.
59. Albrecht, P. and Yamada, K. Rapid calculation of stress intensity factors. J. Struct. Div. Am. Soc. Civ. Engrs, 1977, 103, 377-389.
60. Hobbacher, A. Stress intensity factors of welded joints. Engng Fracture Mechanics, 1993, 46, 173-182.
61. Hobbacher, A. Stress intensity factors of welded joints. Engng Fracture Mechanics, 1994, 49, 323.
62. Radaj, D. Design and Analysis of Fatigue Resistant Welded Structures, 1990 (Abington Publishing, Abington, Cambridge).
63. Maddox, S. J. Scale effect in fatigue of fillet welded aluminium alloy. In Proceedings of the Sixth International Conference on Aluminium Weldments (INALCO 95), 1995, Cleveland, Ohio, 1995, pp. 77-93.
64. Hou, C. Y. and Charng, J. J. Models for the estimation of weldment fatigue crack initiation life. Int. J. Fatigue, 1997, 19, 537-541.
65. Miller, K. J. The three thresholds for fatigue crack propagation. In Fatigue and Fracture Mechanics, Vol. 27, ASTM STP 1296 (Eds R. S. Piascik, J. C. Newman and M. E. Dowling), 1997, pp. 267-286 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
66. Atzori, B., Blasi, G. and Pappalettere, C. Evaluation of fatigue strength of welded structures by local strain measurements. Expl Mechanics, 1985, 25(2), 129-139.
67. Tovo, R. and Lazzarin, P. Relationships between local and structural stress in the evaluation of the weld toe stress distribution. Int. J. Fatigue (in press).