Predictive analytical and thermal modeling of orthogonal cutting process-part I: Predictions of tool forces, stresses, and temperature distributions

Journal of Manufacturing Science and Engineering

Volumn 128, Issue 2, 2006, Pages 435-444

  Karpat, Yiǧit ^a   Özel, Tuǧrul ^a  

^a DEPARTMENT OF INDUSTRIAL AND SYSTEMS ENGINEERING   (United States)

Author keywords

Heat partition; Heat source method; Non uniform heat intensity; Temperature distributions; Tool forces; Tool stresses

Indexed keywords

COMPUTER SIMULATION; INTERFACES (MATERIALS); MACHINE TOOLS; MACHINING; STRESS CONCENTRATION; STRESSES; TEMPERATURE DISTRIBUTION;

HEAT PARTITION; HEAT SOURCE METHOD; NON-UNIFORM HEAT INTENSITY; SHEAR ZONE THEORY; TOOL FORCES; TOOL STRESSES;

CUTTING;

EID: 33745460625     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2162590     Document Type: Article

References (28)

1. Ernst, H., and Merchant, M. E., 1941, "Chip Formation, Friction and High Quality Machined Surfaces," Trans. Am. Soc. Met., 29, pp. 299-378.
2. Lee, E. H., and Shaffer, B. W., 1951, "The Theory of Plasticity Applied to a Problem of Machining," J. Appl. Mech., 18. pp. 405-413.
3. Zorev, N. N., 1963, "Inter-Relationship Between Shear Processes Occurring Along Tool Face and Shear Plane in Metal Cutting," International Research in Production Engineering ASME, New York, pp. 42-49.
4. Oxley, P. L. B., 1989, Mechanics of Machining, an Analytical Approach to Assessing Machinability, Ellis Horwood Limited, Chichester, England.
5. Childs, T. H. C., 1998, "Material Property Needs in Modeling Metal Machining," Proceedings of the CIRP International Workshop on Modeling of Machining Operations, Atlanta, Georgia, I. S. Jawahir, A. K. Balaji, and R. Stevenson, eds., University of Kentucky Publishing Services, Lexington, KY, May 19, pp. 193-202.
6. Özel, T., and Allan, T., 2000, "Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting," Int. J. Mach. Tools Manuf., 40(1). pp. 133-152
7. Özel, T., and Zeren, E., 2005, "A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining," ASME J. Manuf. Sci. Eng., in press.
8. Johnson, G. R., and Cook, W. H., 1983, "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures," Proceedings of the 7th International Symposium on Ballistics. The Hague, The Netherlands, April 21-26, pp. 541-547.
9. Hahn, R. S., 1951, "On the Temperature Developed at the Shear Plane in the Metal Cutting Process," Proceedings of First US National Congress of Applied Mechanics, pp. 661-666.
10. Trigger, K. J., and Chao, B. T., 1951, "An Analytical Evaluation of Metal Cutting Temperatures," Trans. ASME, 73, pp. 57-68.
11. Chao, B. T., and Trigger, K. J., 1953, "The Significance of the Thermal Number in Metal Machining," Trans. ASME, 75, pp. 109-120.
12. Leowen, E. G., and Shaw, M. C., 1954, "On the Analysis of Cutting Tool Temperatures," Trans. ASME, 71, pp. 217-231.
13. Leone, W. C., 1954, "Distribution of Shear Zone Heat in Metal Cutting," Trans. ASME, 76, pp. 121-125.
14. Boothroyd, G., 1963, "Temperatures in Orthogonal Metal Cutting," Proc. Inst. Mech. Eng., 177, pp. 789-810.
15. Komanduri, R., and Hou, Z. B., 2001, "Thermal Modeling of the Metal Cutting Process, Part 1: Temperature Rise Distribution Due to Shear Plane Heat Source," Int. J. Mech. Sci., 42, pp. 1715-1752.
16. Komanduri, R., and Hou, Z. B., 2001, "Thermal Modeling of the Metal Cutting Process, Part 2: Temperature Rise Distribution Due to Frictional Heat Source at the Tool-Chip Interface," Int. J. Mech. Sci., 43, pp. 57-88.
17. Komanduri, R., and Hou, Z. B., 2001, "Thermal Modeling of the Metal Cutting Process, Part 3: Temperature Rise Distribution Due to Combined Effects of Shear Plane Heat Source and the Tool-Chip Interface Frictional Heat Source," Int. J. Mech. Sci., 43, pp. 89-107.
18. Huang, Y., and Liang, S. Y., 2003, "Modelling of the Cutting Temperature Distribution Under the Tool Flank Wear Effect," Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 217, pp. 1195-1208.
19. Jaspers, S. P. F. C., and Dautzenberg, J. H., 2002, "Material Behavior in Conditions Similar to Metal Cutting: Flow Stress in the Primary Shear Zone," J. Mater. Process. Technol., 122, pp. 322-330.
20. Adibi-Sedeh, A. H., Madhavan, V., and Bahr, B., 2003, "Extension of Oxley's Analysis of Machining to Use Different Material Models," ASME J. Manuf. Sci. Eng., 125, pp. 656-666.
21. Johnson, G. R., Slryk, R. A., Holmquist, T. J., and Beissel, S. R., 1996, User Instruction for the 1996 Version of the EPIC Code, Alliant Techsystems Inc.
22. Jaeger, J. C., 1942, "Moving Sources of Heat and the Temperatures at Sliding Contacts," J. Proc. R. Soc. N. S. W., 76, pp. 203-224.
23. Ivester, R. W., Kennedy, M., Davies, M., Stevenson, R., Thiele, J., Furness, R., and Athavale, S., 2000, "Assessment of Machining Models: Progress Report," Mach. Sci. Technol., 4(3), pp. 511-538.
24. Jaspers, S. P. F. C., and Dautzenberg, J. H., 2002, "Material Behavior in Metal Cutting: Strains, Strain Rates and Temperatures in Chip Formation," J. Mater. Process. Technol., 121, pp. 123-135.
25. Davies, M. A., Cao, Q., Cooke, A. L., and Ivester, R., 2003, "On the Measurement and Prediction of Temperature Fields in Machining 1045 Steel," CIRP Ann., 52(1), pp. 77-80.
26. Li, X., 1997, "Development of a Predictive Model for Stress Distributions at the Tool-Chip Interface In Machining," J. Mater. Process. Technol., 63, pp. 169-174.
27. Tay, A. O., Stevenson, M. G., and de Vahl Davis, G., 1974, "Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining," Proceedings of Institution for Mechanical Engineers, 188, pp. 627-638.
28. Adibi-Sedeh, A. H., and Madhavan, V., 2002, "Effect of Some Modifications to Oxley's Machining Theory and the Applicability of Different Material Models," Mach. Sci. Technol., 6(3), pp. 379-395.