Assessment of machining models: progress report

Machining Science and Technology

Volumn 4, Issue 3, 2000, Pages 511-538

  Ivester, R W ^a   Kennedy, M ^a   Davies, M ^a   Stevenson, R ^b   Thiele, J ^c   Furness, R ^d   Athavale, S ^d  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

^c CATERPILLAR INC   (United States)

^d FORD MOTOR COMPANY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BENCHMARKING; CALIBRATION; MACHINE SHOP PRACTICE; MACHINE TOOLS; MATHEMATICAL MODELS;

BLIND TESTS; NONLINEAR PHYSICAL PHENOMENA;

MACHINING;

EID: 0034478932     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1080/10940340008945720     Document Type: Article

References (83)

1. Merchant, E., 1998, Proceedings of the CIRP International Workshop on Modeling of Machining Operations, Atlanta, GA, USA.
2. Soons, H.A., Yaniv, S.L., 1995, Precision in machining: research challenges, Gaithersburg, MD: National Institute of Standards and Technology, NISTIR 5628.
3. Taylor, F. W., 1907, Trans. ASME 28:31.
4. Koenigsburger, F., 1964, Design Principles of Metal Cutting Machine Tools, Peragamon, Oxford.
5. Machining Data Handbook, 3rd Edition, 1980, Vol. 1 & 2, Metcut Reseach Associates Inc., Cinncinnatti, Ohio, USA.
6. Shaw, M. C., 1984, Metal Cutting Principals, Oxford Press, Oxford, UK.
7. Trent, 1991, Metal Cutting, Butterworth-Heinemann, Oxford.
8. Komanduri, R., 1993, Appl Mech Rev, 46(3), 80-129.
9. Mallock, A., 1881, Proc. Royal Soc (Lon), 33:127-139.
10. Piispanen, V., 1937, Teknillan Aiakakauslenti 27:315.
11. Ernst, H., 1938, Physics of Metal Cutting, Machining of Metals, ASM, 1-34.
12. Ernst, H., Merchant, M. E., 1941, Trans. ASME 29:299.
13. Merchant, M. E., 1945, Trans. ASME, 66:A65-A71.
14. Merchant, M. E., 1945, J. App. Phys., 16:267.
15. Merchant, M. E., 1945, J. App. Phys., 16:318.
16. Ernst, H., Merchant, M.E., 1941, Chip formation, friction and high quality machined surfaces, Surface Treatment of Metals, Vol. 29, p. 299.
17. Merchant, M.E., 1945, Mechanics of the cutting process, Journal of Applied Physics, Vol. 16, p. 267-318.
18. Lee, E.H., Schaffer, B.W., 1951, The theory of plasticity applied to a problem of machining, Journal of Applied Mechanics, Vol. 18(4), p. 405.
19. Rubenstein, C. ,1983, The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion, part 1- theory, International Journal of Machine Tool Design and Research, Vol. 23, No. 1, pp. 11-20.
20. Lau, W. S., Rubenstein, C., 1983, The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion, part 2-comparison of experimental data with the deductions from theory, International Journal of Machine Tool Design and Research, Vol. 23, No.1, pp. 21-37.
21. Grzesik, W., 1990, The mechanics of continuous chip formation in oblique cutting with single-edged tool-part I. theory, International Journal of Machine Tool Manufacturing, Vol. 30, No. 3, pp. 359-371.
22. Grzesik, W., 1990, The mechanics of continuous chip formation in oblique cutting with single-edged tool-part II. experimental verification of the theory, International Journal of Machine Tool Manufacturing, Vol. 30, No. 3, pp. 373-388.
23. Palmer, W.B., Oxley, P.L.B., 1959, Mechanics of metal cutting, Proceedings of Institute of Mechanical Engineers, Vol. 173, p. 623.
24. Oxley, P.L.B., 1961, A strain hardening solution for the shear angle in orthogonal metal cutting, International Journal of Mechanical Sciences, Vol. 3, p. 68.
25. Johnson, W., 1962, Some slip-line fields for swaging or expanding, indenting, extruding and machining with curved dies, International Journal of Mechanical Sciences, Vol. 4, p. 323.
26. Oxley, P.L.B., Hatton, A.P., 1963, Shear angle solution based on experimental shear zone and tool-chip interface stress distribution, International Journal of Mechanical Sciences, Vol. 5, p. 41.
27. Oxley, P.L.B., Welsh, M.J.M., 1963, Calculating the shear angle in orthogonal metal cutting from fundamental stress, strain, strain-rate properties of the work material, Proceedings 4th International Machine Tool Design and Research Conference. Pergamon, Oxford, p. 73.
28. Usui, E., Hoshi, K., 1963, Slip-line fields in metal cutting involving centered fan fields, International Research in Production Engineering ASME, p. 61.
29. Kudo, H., 1965, Some new slip-line solutions for two-dimensional steady-state machining, International Journal of Mechanical Sciences, Vol. 7, p. 43.
30. Fenton, R.G., Oxley, P.L.B., 1968, Mechanics of orthogonal machining : allowing for the effects of strain-rate and temperature on tool-chip friction, Proceedings of Institute of Mechanical Engineering.
31. Dewhurst, P., Collins, I.F., 1973, A matrix technique for constructing slip-line field solutions to a class of plane-strain plasticity problems, International Journal of Numerical Methods in Engineering, Vol. 7, p. 357.
32. Dewhurst, P., 1978, On the non-uniqueness of the machining process, Proceedings of Royal Society, London, Vol. A360, p. 587.
33. Dewhurst, P., 1979, The effect of chip breaker constraints on mechanics of machining, Annals of CIRP, Vol. 28, p. 1-5.
34. Martelloti, M.E., 1941, An analysis of the milling process, Trans. ASME, Vol. 63, p. 667.
35. Martelloti, M.E., 1945, An analysis of the milling process II : down milling, Trans. ASME, Vol. 67, p. 233.
36. Koenigsberger, F., Sabberwal, A.J.P., 1960, Chip section and cutting force during the milling operation, Anals of CIRP.
37. Kline, W. A., DeVor, R.E., 1983, The effect of runout on cutting geometry and forces in end milling, International Journal of Machine Tool Design and Research, Vol 23, No. 2/3, p. 123-140.
38. Nakayama, K., Arai, M., Takei, K., 1983, Semi-empirical equations for three components of resultant cutting force, Anals of CIRP, Vol. 30, No. 1, p. 33.
39. Fu, H.J., DeVor, R.E., Kapoor, S.G., 1984, A mechanistic model for the prediction of the force system in face milling operations, ASME Journal of Engineering for Industry, Vol. 106, p. 81-88.
40. Subramani, G.R., Suvada, R., Kapoor, S.G., DeVor, R.E., Meingast, W., 1987, A model for the prediction of force system for cylinder boring process, Proc. NAMRC 15, pp. 439-446.
41. Smith, S. and Tlusty, J., 1988, Modeling and the simulation of the milling process, ASME, PED-Vol. 33, Proc. Winter Annual Meeting, pp. 17-26.
42. Chandrasekharan, V., Kapoor, S.G., DeVor, R.E., 1993, A mechanistic approach to predicting the cutting forces in drilling : with application to fiber-reinforced composite materials, ASME, MD-Vol. 45/PED-Vol. 66, Proc. Machining of Advanced Composites, pp. 33-51.
43. Endres, W.J., DeVor, R.E., Kapoor, S.G., 1993, A dual-mechanism approach to the prediction of machining forces, Parts 1 and 2, Proc., ASME Sym. on Modeling, Monitoring and Control Issues in Manufac., PED-Vol. 64, pp. 563-593.
44. Jawahir, I. S., 1986, Ph.D. Thesis, University of New South Whales.
45. Amarego, E.J.A., Brown, R.H., 1969, The Machining of Metals, Prentice Hall. Engelwood Cliffs New Jersey.
46. Budak, E., Altintas, Y., Amarego, E.J.A., 1996, J. Man. Sci. Eng., 118: 216-224.
47. Amarego, E.J.A., Uthaichaya, M., Journal of Engineering Production 1(1): 1-18.
48. Okushima, K., Kakino, Y., 1971, The residual stress produced by metal cutting, Annals of CIRP, Vol. 20(1), p. 13.
49. Klamecki, B.E., 1973, Incipient chip formation in metal cutting-a three dimension finite element analysis, Ph.D. Dissertation, University of Illinois at Urbana-Champaign.
50. Tay, A.O., Stevenson, M.G., Davis, G.D.V., 1974, Using finite element method to determine the temperature distribution in orthogonal machining, Proceedings of Institute of Mechanical Engineers, Vol. 188, p. 627.
51. Stevenson, M.G., Wright, P.K., Chow, J.G., 1983, Further developments in applying finite element technique to the calculation of temperature distributions in machining and comparisons with experiment," Journal of Industry, Vol. 105, p. 149.
52. Lajczok, M.R., 1980, A study of some aspects of metal machining using finite element method, PhD Dissertation, North Carolina State University.
53. Natarajan, R., Jeelani, S., 1983, Residual stresses in machining using finite element method, Computers in Engineering, Computer Software and Applications, Vol. 3, p. 79.
54. Shirakashi, T., Usui, E., 1974, Simulation of orthogonal cutting mechanism, Proceedings of International Conference of Production Engineering, Tokyo, p. 535.
55. Usui, E., Shirakashi, T., 1982, Mechanics of machining from descriptive to predictive theory, On the Art of Cutting Metals-75 Years Later, ASME Publication PED, Vol. 7, p. 13.
56. Strenkowski, J.S., Carroll III, J.T., 1986, An orthogonal metal cutting model based on an Eulerian finite element method, Manufacturing Processes, Machines and Systems, Proceedings of the 13th NSF Conference on Production Research and Technology.
57. Carroll III, J. T., 1986, A numerical and experimental study of single point diamond machining, PhD Thesis, North Carolina State University.
58. Carroll III, J.T., Strenkowski, J.S., 1988, Finite Element Models of Orthogonal Cutting with Application to Single Point Diamond Turning, International Journal of Mechanical Sciences, Vol. 30, p. 899-920.
59. Marusich, T. D., Ortiz, M., 1995, Int J. Numer. Methods Eng. 38:3675.
60. Ceretti, E., Fallbohmer, P., Wu, W.T., Altan, T., Int. J. Mat. Proc. Tech., 59:169.
61. nd CIRP Int'l Workshop on Modeling of Machining Operations, Nantes, France.
62. nd CIRP Int'l Workshop on Modeling of Machining Operations, Nantes, France.
63. Wayne, S.F., Zimmerman, C., O'Niel, D.A., 1993, Aspects of advanced cutting tool and chip-flow modeling, Proceedings of the 13th International Plansee Seminar, Eds. H. Bildstein and R. Eck, Metallwerk Plansee, Reutte Vol. 2, p. 64.
64. Childs, T., 1997, Material Property requirements for modeling metal machining, J. Phys. IV France 7 Colloque C3, suppl. Au J. Phys. III.
65. Camacho, G., Marusich, T., Ortiz, M., 1993, Adaptive meshing methods for the analysis of unconstrained plastic flow, Advanced Computational Methods for Mate-rial Modeling, Eds. Benson, D. J. and Asaro, R. J., ASME AMD-Vol. 180/PVP-Vol.268, pp. 71-83.
66. Lin, Z.C., Chu, K.T., Pan, W.C., 1994, A study of the stress, strain and temperature distributions of a machined workpiece using a thermo-elastic-plastic coupled model, Journal of Materials Processing Technology, Vol. 41, pp. 291-310.
67. Strenkowski, J.S., Moon, K.J., 1990, Finite Element Prediction of Chip Geometry and Tool/Workpiece Temperature Distributions in Orthogonal Cutting, ASME Journal of Engineering for Industry, Vol. 112, p. 313-318.
68. Moon, K.J., 1988, A thermo-viscoplastic model of orthogonal cutting including chip geometry and temperature prediction. Ph.D. Thesis, North Carolina State University.
69. Strenkowski, J.S., Moon, K.J., 1989, A thermo-viscoplastic model of the cutting process including chip geometry and temperature prediction. Advances in Manufacturing Systems Integration and Processes, 15th Conference on Production Research and Technology.
70. Hsu, J.M., 1990, Three-dimensional finite element modeling of metal cutting, Ph.D. Thesis, North Carolina State University.
71. Chern, S.Y., 1991, An improved finite element model of orthogonal cutting with special emphasis on a separate shear zone model, Ph.D. Thesis, North Carolina State University.
72. Hsu, H.C., 1992, An elasto-viscoplastic finite element model of orthogonal metal cutting for residual stress prediction, Ph.D. Thesis, North Carolina State University.
73. Chien, W.T., 1992, A numerical and experimental investigation of the sticking and sliding contact regions at the chip-tool interface in machining Aluminum 6061-T6, Ph.D. Thesis, North Carolina State University.
74. Yang, J.A., 1992, A predictive model of chip breaking for groove-type tools in orthogonal machining of AISI 1020 steel, Ph.D. Thesis, North Carolina State University.
75. Athavale, S.M., 1994, A damage-based model for predicting chip breakability for obstruction and groove tools, Ph.D. Thesis, North Carolina State University.
76. Liu, W.K., Chang, H., Chen, J.S., Belytschko, 1988, "Arbitrary Lagrangian-Eulerian Petrov-Galerkin Finite Elements for Nonlinear Continua," Computer Methods in Applied Mechanics and Engineering, Vol. 68, pp. 259-310.
77. Movahhedy, M., Gadala, M.S., Altintas, Y., 2000, "Simulation of the Orthogonal Metal Cutting Process using an Arbitrary Lagrangian-Eulerian Finite Elemend Method," J. of Materials Processing Technology, Vol. 103, pp. 267-275.
78. Herbert, E.G., 1926, The Measurement of Cutting Temperatures, Proceedings of the Institute of Mechanical Engineers, pp. 289-329.
79. Boston, O.W., Gilbert, W.W., 1935, Cutting Temperatures Developed by Single-Point Turning Tools, Trans, of the ASM, vol. 23, pp. 703-726.
80. Trigger, K.J., 1948, Progress Report No. 1 on Tool-Chip Interface Temperatures, Transactions of the ASME, Vol. 70, pp. 91-98.
81. Stephenson, D.A., 1993, Tool-Work Thermocouple Temperature Measurements-Theory and Implementation Issues, ASME Journal of Engineering for Industry, Vol. 115, pp. 432-437.
82. Taylor, B.N., and Kuyatt, C.E., 1994, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, National Institute of Standards and Technology Technical Note (TN) 1297.
83. Nondestructive Testing Handbook, 1991, 2nd Edition, Volume 7, Ultrasonic Testing, American Society for Nondestructive Testing.