Extension of Oxley's analysis of machining to use different materials models

Journal of Manufacturing Science and Engineering

Volumn 125, Issue 4, 2003, Pages 656-666

  Adibi Sedeh, Amir H ^a   Madhavan, Vis ^a   Bahr, Behnam ^a  

^a Wichita State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; MATERIALS SCIENCE; MATHEMATICAL MODELS; STRAIN RATE; TEMPERATURE DISTRIBUTION; THERMAL GRADIENTS;

JOHNSON-COOK MATERIAL MODEL; MECHANICAL THRESHOLD STRESS MODEL; OXLEY ANALYSIS;

MACHINING;

EID: 0344515517     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1617287     Document Type: Article

References (36)

1. Armarego, E. J. A., 1998, "A Generic Mechanics of Cutting Approach to Predictive Technological Performance Modeling of the Wide Spectrum of Machining Operations," Mach. Sci. Technol., 2(2), pp. 191-211.
2. Piispaanen, V., 1948, "Theory of Formation of Metal Chips," J. Appl. Phys., 19, pp. 876-881.
3. Ernst, H., 1938, "Physics of Metal Cutting, in Machining of Metals," American Society for Metals, Cleveland, Ohio., pp. 1-34.
4. Merchant, M. E., 1945, "Mechanics of the Metal Cutting Processes," ASME J. Appl. Mech., 11, pp. A165-A175.
5. Lee, E. H., and Shaffer, B. W., 1951, "The Theory of Plasticity Applied to a Problem of Machining," ASME J. Appl. Mech., 73, pp. 405-413.
6. Dewhurst, P., 1978, "On the Non-Uniqueness of the Machining Process," Proc. R. Soc. London, Ser. A, 360, pp. 587-610.
7. Fang, N., Jawahir, I. S., and Oxley, P. L. B., 2001, "A Universal Slip-Line Model With Non-Unique Solutions for Machining With Curled Chip Formation and a Restricted Contact Tools," Int. J. Mech. Sci., 43, pp. 557-580.
8. Hill, R., 1954, "The Mechanics of Machining: A New Approach," J. Mech. Phys. Solids, 3, pp. 47-53.
9. Fenton, R. G., and Oxley, P. L. B., 1968-69, "Mechanics of Orthogonal Machining: Allowing for the Effects of Strain-Rate and Temperature on Tool-Chip Friction," Proc. Inst. Mech. Eng., 183, pp. 417-438.
10. Stevenson, M. G., and Oxley, P. L. B., 1969-1970, "An Experimental Investigation of the Influence of Speed and Scale on the Strain-Rate in a Zone of Intense Plastic Deformation," Proc. Inst. Mech. Eng., 184(31), pp. 561-576.
11. Oxley, P. L. B., and Hastings, W. F., 1977, "Predicting the Strain-Rate in the Zone of Intense Shear in Which the Chip is Formed in Machining From the Dynamic Flow Stress Properties of the Work Material and the Cutting Conditions," Proc. R. Soc. London, Ser. A, 356, pp. 395-410.
12. Oxley, P. L. B., 1989, The Mechanics of Machining: An Analytical Approach to Assessing Machinability, E. Horwood, Chichester, England.
13. Lin, G. C. I., and Oxley, P. L. B., 1972, "Mechanics of Oblique Machining: Predicting Chip Geometry and Cutting Forces From Work Material Properties and Cutting Conditions," Proc. Inst. Mech. Eng., 186, pp. 813-820.
14. Arsecularatne, J. A., Mathew, P., and Oxley, P. L. B., 1995, "Prediction of Chip Flow Direction and Cutting Forces in Oblique Machining With Nose Radius Tools," Proc. Inst. Mech. Eng., B209, pp. 305-315.
15. Young, H. T., Mathew, P., and Oxley, P. L. B., 1994, "Predicting Cutting Forces in Face Milling," Int. J. Mach. Tools Manuf., 34(6), pp. 771-783.
16. Hastings, W. F., Mathew, P., and Oxley, P. L. B., 1980, "Machining Theory for Predicting Chip Geometry, Cutting Forces, etc., From Work Material Properties and Cutting Conditions," Proc. R. Soc. London, Ser. A, 371, pp. 569-587.
17. Palmer, W. B., and Oxley, P. L. B., 1959, "Mechanics of Metal Cutting," Proc. Inst. Mech. Eng., 173, pp. 623-654.
18. Boothroyd, G., 1963, "Temperatures in Orthogonal Metal Cutting," Proc. Inst. Mech. Eng., 177, pp. 789-802.
19. Hastings, W. F., and Oxley, P. L. B., 1976, "Minimum Work as a Possible Criterion for Determining the Frictional Conditions at the Tool/Chip Interface in Machining," Philos. Trans. R. Soc. London, 282, pp. 565-584.
20. Bao, H., and Stevenson, M. G., 1976, "A Basic Mechanism for Built-up Edge Formation in Machining," CIRP Ann., 25(1), pp. 53-57.
21. Kristyanto, B., Mathew, P., and Arsecularatne, J. A., 2000, "Determination of Material Properties of Aluminum From Machining Tests," ICME 2000 - Eighth Int. Conf. On Manuf. Eng., Sydney, Australia, August 27-30.
22. Johnson, G. J., and Cook, W. H., 1983, "A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures," Proceedings of the 7th International Symposium on Ballistics, pp. 541-547.
23. Tanner, A. B., McGinty, R. D., and McDowell, D. L., 1999, "Modeling Temperature and Strain Rate History Effects in OFHC Cu," Int. J. Plast., 15, pp. 575-603.
24. Private communication between Maekawa and Childs as appeared in Childs, T. H. C., "Material Property Requirements for Modeling Metal Machining, 1997," Colloque C3, Journal de physique, III: XXI-XXXIV.
25. Jaspers, S. P. F. C., 1999, "Metal Cutting Mechanics and Material Behavior," PhD thesis, Technische Universiteit Eindhoven.
26. Rule, W. K., 1997, "Numerical Scheme for Extracting Strength Model Coefficients From Taylor Test Data," Int. J. Impact Eng., 19, pp. 797-810.
27. Kobayashi, S., and Thomsen, E. G., 1959, "Some Observations on the Shearing Process in Metal Cutting," ASME J. Ind., pp. 251-261.
28. Follansbee, P. S., and Kocks, U. F., 1988, "A Constitutive Description of the Deformation of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable," Acta Metall., 36, pp. 81-93.
29. Samuel, T., 2000, "Investigation of the Effectiveness of Tool Coatings in Dry Turning of Aluminium Alloys," MSL thesis, Wichita State University.
30. OECD-CIRP, 1966, Proceedings of the Seminar on Metal Cutting.
31. Hastings, W. F., Oxley, P. L. B., and Stevenson, M., 1974, "Predicting Cutting Forces, Tool Life etc., Using Work Material Flow Stress Properties Obtained From High-Speed Compression Tests," Proc. Int. Conf. on Production Engineering, Tokyo, p. 528.
32. Stephenson, D. A., 1991, "Tool-Work Thermocouple Temperature Measurements: Theory and Implementation Issues," PED-Vol 55, Sensors and Signal Processing for Manufacturing, ASME 1992, pp. 81-95.
33. Balasubramanian, S., 2001, "The Investigation of Tool-Chip Interface Conditions Using Carbide and Sapphire Tools," MS thesis, Wichita State University.
34. Adibi-Sedeh, A. H., Madhavan, V., and Bahr, B., 2002, "Upper Bound Analysis of Oblique Cutting With Nose Radius Tools," Int. J. Mach. Tools Manuf., 42(9), pp. 1081-1094.
35. Adibi-Sedeh, A. H., and Madhavan, V., 2002, "Effect of Some Modifications to Oxley's Machining Theory and the Applicability of Different Material Models," Mach. Sci. Technol., 6(3), pp. 377-393.
36. Adibi-Sedeh, A. H., and Madhavan, V., 2003, "Understanding of Finite Element Analysis Results Under the Framework of Oxley's Machining Model," Proceedings of the 6th CIRP International Workshop on Modeling of Machining Operations, Hamilton, Canada, May 20, pp. 1-15.