The design and fabrication of planar multiband metallodielectric frequency selective surfaces for infrared applications

IEEE Transactions on Antennas and Propagation

Volumn 54, Issue 4, 2006, Pages 1265-1276

  Bossard, Jeremy A ^a   Werner, Douglas H ^a   Mayer, Theresa S ^a   Smith, Jacob A ^a   Tang, Yan U ^a   Drupp, Robert P ^b   Li, Ling ^a  

^a The Pennsylvania State University   (United States)

^b NORTHROP GRUMMAN CORPORATION   (United States)

Author keywords

Fractals; Frequency selective surfaces (FSS); Genetic algorithms (GAs); Infrared filters; Metallodielectric photonic crystals

Indexed keywords

CRYSTALS; DIELECTRIC LOSSES; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FRACTALS; GENETIC ALGORITHMS; METHOD OF MOMENTS;

FREQUENCY SELECTIVE SURFACES; INFRARED FILTERS; METALLIC LOSSES; METALLODIELECTRIC PHOTONIC CRYSTALS;

DIELECTRIC MATERIALS;

EID: 33645726710     PISSN: 0018926X     EISSN: None     Source Type: Journal    
DOI: 10.1109/TAP.2006.872583     Document Type: Article

References (45)

1. B. A. Munk, Frequency Selective Surfaces: Theory and Design. New York: Wiley, 2000.
2. T. K. Wu, Ed., Frequency Selective Surface and Grid Array. New York: Wiley, 1995.
3. I. Puscasu, G. Boreman, R. C. Tiberio, D. Spencer, and R. R. Krchnavek, "Comparison of infrared frequency selective surfaces fabricated by direct-write electron-beam and bilayer nanoimprint lithographies," J. Vac. Sci. Technol. B, vol. 18, no. 6, pp. 3578-3581, Nov. 2000.
4. S. Gupta, G. Tuttle, M. Sigalas, and K.-M. Ho, "Infrared filters using metallic photonic band gap structures on flexible substrates," Appl. Phys. Lett., vol. 71, no. 17, pp. 2412-2414, Oct. 1997.
5. H. A. Smith, M. Rebbert, and O. Sternberg, "Designer infrared filters using stacked metal lattices," Appl. Phys. Lett., vol. 82, no. 21, pp. 3605-3607, May 2003.
6. W. Wen, Z. Yang, G. Xu, Y. Chen, L. Zhou, W. Ge, C. T. Chan, and P. Sheng, "Infrared passbands from fractal slit patterns on a metal plate," Appl. Phys. Lett., vol. 83, no. 11, pp. 2106-2108, Sept. 2003.
7. J. A. Oswald, B.-I. Wu, K. A. McIntosh, L. J. Mahoney, and S. Verghese, "Dual-band infrared metallodielectric photonic crystal filters," Appl. Phys. Lett., vol. 77, no. 14, pp. 2098-2100, Oct. 2000.
8. R. P. Drupp, J. A. Bossard, Y.-H. Ye, D. H. Werner, and T. S. Mayer, "Dual-band infrared metallodielectric photonic crystals," Appl. Phys. Lett., vol. 85, pp. 1835-1837, Sept. 2004.
9. R. P. Drupp, J. A. Bossard, D. H. Werner, and T. S. Mayer, "Single-layer multi-band infrared metallodielectric photonic crystals designed by genetic algorithm optimization," Appl. Phys. Lett., vol. 86, pp. 081 102- 1-081 102-3, Feb. 2005.
10. R. Ulrich, "Interference filters for the far infrared," Appl. Opt., vol. 7, no. 10, pp. 1987-1996, Oct. 1968.
11. V. P. Tomaselli, D. C. Edewaard, P. Gillan, and K. D. Möller, "Far-infrared bandpass filters from cross-shaped grids," Appl. Opt., vol. 20, no. 8, pp. 1361-1366, Apr. 1981.
12. A. Lüker, O. Sternberg, H. Hein, J. Schultz, and K.-D. Möller, "Thick capacitive meshes on polyimide substrates," Infrared Phys. Technol., vol. 45, no. 2, pp. 153-157, Mar. 2004.
13. D. M. Byrne, A. J. Brouns, F. C. Case, R. C. Tiberio, B. L. Whitehead, and E. D. Wolf, "Infrared mesh filters fabricated by electron-beam lithography," J. Vac. Sci. Technol. B, vol. 3, no. 1, pp. 268-271, Jan. 1985.
14. I. Puscasu, D. Spencer, and G. D. Boreman, "Refractive-index and element-spacing effects on the spectral behavior of infrared frequency-selective surfaces," Appl. Opt., vol. 39, no. 10, pp. 1570-1574, Apr. 2000.
15. I. Puscasu, W. L. Schaich, and G. D. Boreman, "Modeling parameters for the spectral behavior of infrared frequency-selective surfaces," Appl. Opt., vol. 40, no. 1, pp. 118-124, Jan. 2001.
16. S. J. Spector, D. K. Astolfi, S. P. Doran, T. M. Lyszczarz, and J. E. Raynolds, "Infrared frequency selective surfaces fabricated using optical lithography and phase-shift masks," J. Vac. Sci. Technol. B, vol. 19, no. 6, pp. 2757-2760, Nov. 2001.
17. M.-H. Wu, K. E. Paul, J. Yang, and G. M. Whitesides, "Fabrication of frequency-selective surfaces using microlens projection photolithography," Appl. Phys. Lett., vol. 80, no. 19, pp. 3500-3502, May 2001.
18. K. J. Kogler and R. G. Pastor, "Infrared filters fabricated from submicron loop antenna arrays," Appl. Opt., vol. 27, no. 1, pp. 18-19, Jan. 1988.
19. C. M. Rhoads, E. K. Damon, and B. A. Munk, "Mid-infrared filters using conducting elements," Appl. Opt., vol. 21, no. 15, pp. 2814-2816, Aug. 1982.
20. K. A. McIntosh, L. J. Mahoney, K. M. Molvar, O. B. McMahon, S. Verghese, M. Rothschild, and E. R. Brown, "Three-dimensional metallodielectric photonic crystals exhibiting resonant infrared stop bands," Appl. Phys. Lett., vol. 70, no. 22, pp. 2937-2939, June 1997.
21. S. Govindaswamy, J. East, F. Terry, E. Topsakal, J. L. Volakis, and G. I. Haddad, "Frequency-selective surface based bandpass filters in the near-infrared region," Microw. Opt. Technol. Lett., vol. 41, no. 4, pp. 266-269, May 2004.
22. J. E. Raynolds, B. A. Munk, J. B. Pryor, and R. J. Marhefka, "Ohmic loss in frequency-selective surfaces," J. Appl. Phys., vol. 93, no. 9, pp. 5346-5358, May 2003.
23. R. T. Kristensen, J. F. Beausang, and D. M. DePoy, "Frequency selective surfaces as near-infrared electromagnetic filters for thermophotovoltaic spectral control," J. Appl. Phys., vol. 95, no. 9, pp. 4845-4851, May 2004.
24. B. Monacelli, J. B. Pryor, B. A. Munk, D. Kotter, and G. D. Boreman, "Infrared frequency selective surface based on circuit-analog square loop design," IEEE Trans. Antennas Propag., vol. 53, no. 2, pp. 745-752, Feb. 2005.
25. D. H. Werner and S. Ganguly, "An overview of fractal antenna engineering research," IEEE Antennas Propag. Mag., vol. 52, no. 16, pp. 744-751, Oct. 1995.
26. A. Ishimaru, Electromagnetic Wave Propagation, Radiation, and Scattering. Englewood Cliffs, NJ: Prentice-Hall, 1991.
27. R. Mittra, C. H. Chan, and T. Cwik, "Techniques for analyzing frequency selective surfaces - A review," Proc. IEEE, vol. 76, no. 12, pp. 1593-1615, Dec. 1988.
28. C. H. Chan and R. Mittra, "On the analysis of frequency selective surfaces using subdomain basis functions," IEEE Trans. Antennas Propag., vol. 38, pp. 40-50, Jan. 1990.
29. E. Topsakal and J. L. Volakis, "Frequency selective volumes for optical spatial filters," IEEE Antennas Wireless Propag. Lett., vol. 3, no. 1, pp. 236-238, 2004.
30. A. D. Rakić, A. B. Djurišic, J. M. Elazar, and M. L. Majewski, "Optical properties of metallic films for vertical-cavity optoelectronic devices," Appl. Opt., vol. 37, no. 22, pp. 5271-5283, Aug. 1998.
31. Z. M. Zhang, G. Lefever-Button, and F. R. Powell, "Infrared refractive index and extinction coefficient of polyimide films," Int. J. Thermophys., vol. 19, no. 3, pp. 905-916, May 1998.
32. D. Goldberg, Genetic Algorithms in Search, Optimization, and Machine Learning. Reading, MA: Addition-Wesley, 1989.
33. R. L. Haupt, "An introduction to genetic algorithms for electromagnetics," IEEE Antennas Propag. Mag., vol. 37, pp. 7-15, Apr. 1995.
34. R. Haupt and S. Haupt, Practical Genetic Algorithms. New York: Wiley, 1997.
35. D. S. Weile and E. Michielssen, "Genetic algorithm optimization applied to electromagnetics: A review," IEEE Trans. Antennas Propag., vol. 45, no. 3, pp. 343-353, Mar. 1997.
36. J. M. Johnson and Y. Rahmat-Samii, "Genetic algorithms in engineering electromagnetics," IEEE Antennas Propag. Mag., vol. 39, pp. 7-25, 1997.
37. Y. Rahmat-Samii and E. Michielssen, Eds., Electromagnetic Optimization by Genetic Algorithms. New York: Wiley, 1999.
38. D. J. Kern and D. H. Werner, "A genetic algorithm approach to the design of ultra-thin electromagnetic bandgap absorbers," Microw. Opt. Technol. Lett., vol. 38, no. 1, pp. 61-64, Jul. 2003.
39. D. J. Kern, D. H. Werner, M. J. Wilhelm, and K. H. Church, "Genetically engineered multiband high-impedance frequency selective surfaces," Microw. Opt. Technol. Lett., vol. 38, no. 5, pp. 400-403, Sep. 2003.
40. D. J. Kern, D. H. Werner, A. Monorchio, L. Lanuzza, and M. J. Wilhelm, "The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces," IEEE Trans. Antennas Propag., vol. 53, no. 1, pp. 8-17, Jan. 2005.
41. J. A. Bossard, D. H. Werner, T. S. Mayer, and R. P. Drupp, "A novel design methodology for reconfigurable frequency selective surfaces using genetic algorithms," IEEE Trans. Antennas Propag., vol. 53, no. 4, pp. 1390-1400, Apr. 2005.
42. S. Chakravarty, R. Mittra, and N. R. Williams, "Application of a microgenetic algorithm (MGA) to the design of broadband microwave absorbers using multiple frequency selective surface screens buried in dielectrics," IEEE Trans. on Antennas Propag., vol. 50, no. 3, pp. 284-296, Mar. 2002.
43. A. Monorchio, G. Manara, and L. Lanuzza, "Synthesis of artificial magnetic conductors by using multilayered frequency selective surfaces," IEEE Antennas Wireless Propag. Lett., vol. 1, no. 1, pp. 196-199, 2002.
44. A. Monorchio, G. Manara, U. Serra, G. Marola, and E. Pagana, "Design of waveguide filters by using genetically optimized frequency selective surfaces," IEEE Microw. Wireless Components Lett., vol. 15, no. 6, pp. 407-409, Jun. 2005.
45. M. Ohira, H. Deguchi, M. Tsuji, and H. Shigesawa, "Multiband single-layer frequency selective surface designed by combination of genetic algorithm and geometry-refinement technique," IEEE Trans. Antennas Propag., vol. 52, no. 11, pp. 2925-2931, Nov. 2004.