Fracture loads for ceramic samples with rounded notches

Engineering Fracture Mechanics

Volumn 73, Issue 7, 2006, Pages 880-894

  Gomez F J ^a   Elices, M ^a  

^a UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

Ceramics; Cohesive crack; Fracture criterion; Notches

Indexed keywords

ALUMINA; CRACKS; ELASTICITY; FRACTURE MECHANICS; FRACTURE TOUGHNESS; MATHEMATICAL MODELS; SILICON; STRESSES; TENSILE STRENGTH; ZIRCONIA;

COHESIVE CRACK; FRACTURE CRITERION; NOTCHES;

CERAMIC MATERIALS;

ALUMINA; CERAMIC MATERIALS; CRACKS; ELASTICITY; FRACTURE MECHANICS; FRACTURE TOUGHNESS; MATHEMATICAL MODELS; SILICON; STRESSES; TENSILE STRENGTH; ZIRCONIA;

EID: 31344434825     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2005.11.005     Document Type: Article

References (41)

1. P.A. Gradin A fracture criterion for edge-bonded bi-material bodies J Compos Mater 16 1982 448-456
2. A. Carpinteri Stress singularity and generalized fracture toughness at the vertex of re-entrant corners Engng Fract Mech 26 1987 143-155
3. F.J. Gómez M. Elices A fracture criterion for sharped V-notched samples Int J Fract 123 2003 163-175
4. F.J. Gómez M. Elices A fracture criterion for blunted V-notched samples Int J Fract 127 2004 239-264
5. Lazzarin P, Filippi S. A generalized stress intensity factor to be applied to rounded V-shaped notches. Int J Solids Struct, in press.
6. F.J. Gómez M. Elices J. Planas The cohesive crack concept: Applications to PMMA at -60 °C Engng Fract Mech 72 2005 1268-1285
7. D. Munz T. Fett Ceramics: Mechanical properties, failure behaviour, material selection 1980 Springer Berlin
8. Y. Murakami Stress intensity factors handbook 1987 Pergamon Press Oxford 2001, five volumes
9. K. Tsuji K. Iwase K. Ando An investigation into the location of crack initiation sites in alumina, polycarbonate and mild steel Fatigue Fract Engng Mater Struct 22 1999 509-517
10. JIS R 1607. Testing method for fracture toughness of high performance ceramics. Japan Standard Association; 1993.
11. Pastor JY. Fractura de materiales cerámicos avanzados. Thesis doctoral, Universidad Complutense de Madrid, Spain; 1993.
12. 3 using four point bend specimens with straight-through and chevron notches J Am Ceram Soc 63 1980 300-305
13. K. Ando M. Iwasa A. Kim A.C. Chu S. Sato Effects of crack length, notch root radius and grain size on fracture toughness of fine ceramics Fatigue Fract Engng Mater Struct 16 1993 995-1006
14. 3 J Am Ceram Soc 56 1973 107
15. Z. Yosibash A. Bussiba I. Gilad Fracture criteria for brittle elastic materials Int J Fract 125 2004 307-333
16. Rosa L, Fernandes J, Duarte I. Subcritical crack growth in three engineering ceramics under biaxial conditions. In: ECF12 proceedings, Fracture from defects, EMAS, vol. 1. 1998, p. 509-14.
17. J. Wang W.M. Rainforth I. Wadsworth R. Stevens The effects of notch width on the SENB toughness for oxide ceramics J Eur Ceram Soc 10 1992 21-31
18. G.A. Gogotsi A.V. Drozdov V.P. Zavata M.V. Swain Comparison of the mechanical behaviour of zirconia partially stabilizes with ytria and magnesia J Aust Ceram Soc 8 1991 37-49
19. Gogotsi GA. Fracture toughness studies on ceramics and ceramic particulate composites at different temperatures. In: Fracture resistance testing of monolitic and composite brittle materials, ASTM STP, vol. 1409. 2002, p. 199-212.
20. S.J. Schneider Ceramics and glasses Engineered Materials Handbook vol. 4 1991 ASM International p. 30
21. J. Wang M. Rainforth R. Stevens The grain size dependence of the mechanical properties in TZP ceramics Br Ceram Trans J 88 1989 1-6
22. I. Takahashi S. Usami K. Nakakado H. Miyata S. Shida Effect of defect size and notch radius on fracture strength of engineering ceramics J Ceram Soc Jpn 93 1985 186-194
23. G. Gogotsi A. Fracture toughness of ceramics and ceramic composites Ceram Int 7 2003 777-784
24. Myers RJ, Hillberry BM. Effect of notch radius in the fracture behaviour of monocrystalline silicon. In: ICF4 Proceedings, vol. 3. Waterloo, Canada, 1977, p. 1001-5.
25. H. Kahn N. Tayebi R. Ballarini R.L. Mullen A.H. Heuer Fracture toughness of polysilicon MEMS devices Sens Actuators 82 2000 274-280
26. W.G. Knauss I. Chasiotis Y. Huang Mechanical measurements at the micron and nanometer scales Mech Mater 35 2003 217-231
27. I. Chasiotis W.G. Knauss The mechanical strength of polysilicon films: Part 1. The influence of fabrication governed surface conditions J Mech Phys Solids 51 2003 1533-1550
28. I. Chasiotis W.G. Knauss The mechanical strength of polysilicon films: Part 2. Size effects associated with elliptical and circular perforations J Mech Phys Solids 51 2003 1551-1572
29. D. Taylor Predicting the fracture strength of ceramic materials using the theory of critical distances Engng Fract Mech 71 2004 2407-2416
30. S. Filippi P. Lazzarin R. Tovo Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates Int J Solids Struct 39 2002 4543-4565
31. P. Lazzarin R. Tovo A unified approach to the evaluation of linear elastic stress fields in the neighbourhood of cracks and notches Int J Fract 78 1996 3-19
32. A. Seweryn Brittle fracture criterion for structures with sharp notches Engng Fract Mech 47 1994 673-681
33. P. Lazzarin R. Zambardi A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches Int J Fract 112 2001 275-298
34. D. Leguillon Z. Yosibash Crack onset at a V-notch. Influence of the notch tip radius Int J Fract 122 2003 1-21
35. M. Elices G.V. Guinea F.J. Gómez J. Planas The cohesive zone model: Advantages, limitations and challenges Engng Fract Mech 69 2002 137-163
36. Z.P. Bazant J. Planas Fracture and size effect in concrete and other quasibrittle materials 1997 CRC Press Boca Raton, FL
37. V. Tvergaard J.W. Hutchinson The relation between crack growth resistance and fracture process parameters in elastic-plastic solids J Mech Phys Solids 40 1992 1377-1397
38. H. Yuan G. Lin A. Cornec Verification of a cohesive zone model for ductile failure J Engng Mater Technol 118 1996 109-116
39. G. Lin X.G. Meng A. Cornec K.H. Schwalbe The effect of strength mismatch on mechanical performance of weld joints Int J Fract 96 1999 37-54
40. Y.W. Mai B.R. Lawn Crack-interface bridging as a fracture resistance mechanism in ceramics: II. Theoretical fracture mechanics model J Am Ceram Soc 70 1987 289-294
41. M.G.A. Tijssens E. van der Giessen L.J. Sluys Modeling of crazing using a cohesive surface methodology Mech Mater 32 2000 19-35