Generalized multivariable gain scheduling with robust stability analysis

Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME

Volumn 127, Issue 4, 2005, Pages 668-687

  Zhang, Rong ^a   Alleyne, Andrew G ^c   Carter, Don E ^b  

^a GENERAL MOTORS CORPORATION   (United States)

^b University of Illinois at Urbana Champaign   (United States)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

GAIN-SCHEDULED CONTROLLERS; LOCAL STABILITY; NONLINEAR CLOSED LOOP SYSTEMS;

ALGORITHMS; CLOSED LOOP CONTROL SYSTEMS; CONTROL EQUIPMENT; ELECTROHYDRAULIC FORMING; INTERPOLATION; NONLINEAR SYSTEMS; SCHEDULING;

ROBUSTNESS (CONTROL SYSTEMS);

EID: 29844433033     PISSN: 00220434     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2101843     Document Type: Article

References (36)

1. Rugh, W. J., 1991, "Analytical Framework for Gain Scheduling," IEEE Control Syst. Mag., 11, pp. 79-84.
2. Astrom, K., and Wittenmark, B., 1995, Adaptive Control, Addison-Wesley, Reading, MA.
3. Khalil, H. K., 1996, Nonlinear Systems, Prentice-Hall, Englewood Cliffs, NJ, 2nd ed.
4. Leith, D. J., and Leithead, W. E., 2000, "Survey of Gain-Scheduling Analysis and Design," Int. J. Control, 73, pp. 1001-1025.
5. Guo, D., and Rugh, W. J., 1992, "An Approach to Gain Scheduling on Fast Variables," presented at the 31st Conference on Decision and Control, Tucson, AZ, pp. 759-763.
6. Hunt, K. J., Johansen, T. A., Kalkkuhl, J., Fritz, H., and Gottsche, T., 2000, "Speed Control Design for an Experimental Vehicle Using a Generalized Gain Scheduling Approach," IEEE Trans. Control Syst. Technol., 8, pp. 381-395.
7. Lawrence, D. A., and Rugh, W. J., 1995, "Gain Scheduling Dynamic Linear Controllers for a Nonlinear Plant," Automatica, 31, pp. 381-390.
8. Rugh, W. J., and Shamma, J. S., 2000, "Research on Gain Scheduling," Automatica, 36, pp. 1401-1425.
9. Nichols, R. A., Reichert, R. T., and Rugh, W. J., 1993, "Gain Scheduling for H-infinity Controllers: A Flight Control Example," IEEE Trans. Control Syst. Technol., 1, pp. 69-79.
10. Hyde, R. A., and Keith, G., 1993, "The Application of Scheduled H/Sub Infinity/Controllers to a VSTOL Aircraft," IEEE Trans. Autom. Control, 38, pp. 1021-1039.
11. Jiang, J., 1994, "Optimal Gain Scheduling Controller for a Diesel Engine," IEEE Control Syst. Mag., 14, pp. 42-48.
12. Hunt, K. J., Kalkkuhl, J., Fritz, H., Johansen, T. A., and Gottsche, T., 1998, "Experimental Comparison of Nonlinear Control Strategies for Vehicle Speed Control," presented at Control Applications, Proceedings of the 1998 IEEE International Conference on the Dept. of Mech. Eng., Glasgow Univ., UK, Vol. 2, pp. 1006-1010.
13. Packard, A., and Kantner, M., 1996, "Gain Scheduling the LPV Way," presented at Decision and Control, Proceedings of the 35th IEEE, Vol. 4, pp. 3938-3941.
14. Shamma, J. S., and Athans, M., 1992, "Gain Scheduling: Potential Hazards and Possible Remedies," IEEE Control Syst. Mag., 12, pp. 101-107.
15. Hingwe, P., Tan, H.-S., Packard, A. K., and Tomizuka, M., 2002, "Linear Parameter Varying Controller For Automated Lane Guidance: Experimental Study on Tractor-Trailers," IEEE Trans. Control Syst. Technol., 10, pp. 793-806.
16. Rasmussen, B. P., and Alleyne, A., 2004, "Control-Oriented Modeling of Transcritical Vapor Compression Systems," ASME J. Dyn. Syst., Meas., Control, 126, pp. 54-64.
17. Lawrence, D. A., and Rugh, W. J., 1993, "Gain Scheduling Dynamic Linear Controllers for a Nonlinear Plant," presented at the 32rd Conference on Decision and Control, San Antonio, Texas, pp. 1024-1029.
18. Packard, A., Becker, G., Philbrick, D., and Balas, G., 1993, "Control of Parameter-Dependent Systems: Applications to H-Infinity Gain-Scheduling," presented at the 1st IEEE Regional Conference on Aerospace Control Systems, pp. 329-333.
19. Gawthrop, P. J., 1995, "Continuous-Time Local State Local Model Networks," presented at Systems, Man and Cybernetics, 1995, Intelligent Systems for the 21st Century, IEEE International Conference on the Centre for Syst. & Control., Glasgow Univ., UK, Vol. 1, pp. 852-857.
20. Shamma, J. S., and Athans, M., 1988, "Guaranteed Properties for Nonlinear Gain Scheduled Control Systems," presented at the 27th Conference on Decision and Control, Austin, Texas, pp. 2202-2208.
21. Skogestad, S., and Postlethwaite, I., 1996, Multivariable Feedback Control: Analysis and Design, Wiley and Sons, New York.
22. Dullerud, G. E., and Paganini, F. G., 2000, A Course in Robust Control Theory: A Convex Approach, Springer-Verlag, New York.
23. Zhou, K., and Doyle, J. C., 1998, Essentials of Robust Control, Prentice-Hall, Upper Saddle River, NJ.
24. Pellanda, P. C., Apkarian, P., and Alazard, D., 2000, "Gain-Scheduling Through Continuation of Observer-Based Realizations - Applications to H-infinity and μ Controllers," presented at the 39th IEEE Conference on Decision and Control, Sydney, Australia, pp. 2787-2792.
25. Takagi, T., and Sugeno, M., 1985, "Fuzzy Identification of Systems and its Application to Modeling and Control," IEEE Trans. Syst. Man Cybern., 15, pp. 116-132.
26. Hunt, K. J., and Johansen, T. A., 1997, "Design and Analysis of GainScheduled Control Using Local Controller Networks," Int. J. Control, 66, pp. 619-651.
27. Singh, S., 1997, "State of the Art in Automation of Earthmoving," J. Aerosp. Eng., 10, pp. 179-188.
28. Haycraft, W. R., 2000, Yellow Steel: The Story of the Earthmoving Equipment Industry, University of Illinois Press, Urbana, IL.
29. Zhou, K., Doyle, J. C., and Glover, K., 1996, Robust and Optimal Control, Prentice-Hall, Upper Saddle River, NJ.
30. Prasetiawan, E. A., Zhang, R., Alleyne, A. G., and Tsao, T. C., 1999, "Modeling and Control Design of a Powertrain Simulation Testbed For Earthmoving Vehicles," presented at the International Mechanical Engineering Congress and Exposition: The Fluid Power and Systems Technology Division, Nashville, TN, pp. 139-146.
31. Prasetiawan, E. A., Zhang, R., and Alleyne, A. G., 2000, "Modeling and Coordinated Control of An Earthmoving Vehicle Powertrain," presented at the International Mechanical Engineering Congress and Exposition: The Fluid Power and Systems Technology Division, Orlando, FL, pp. 289-296.
32. Zhang, R., Prasetiawan, E., and Alleyne, A., 2001, "Modeling and Multivariable Control of an Earthmoving Vehicle Powertrain," presented at the International Mechanical Engineering Congress and Exposition: Dynamic Systems and Control, New York, NY, pp. DSC-24564 in CD-ROM.
33. Zhang, R., Prasetiawan, E. A., Alleyne, A. G., and Thacher, R., 2001, "Modeling and Coordinated Control of a Multi-Load Earthmoving Vehicle Powertrain," presented at the European Control Conference 2001, Porto, Portugal, pp. 1577-1582.
34. Zhang, R., Alleyne, A. G., and Prasetiawan, E. A., 2002, "Modeling and H2/H-infinity MIMO Control of an Earthmoving Vehicle Powertrain," ASME J. Dyn. Syst., Meas., Control, 124, pp. 625-636.
35. Prasetiawan, E. A., 2000, "Modeling, Simulation and Control of an Earthmoving Vehicle Powertrain Simulator," in Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, Urbana, IL.
36. Zhang, R., 2002, "Multivariable Robust Control of Nonlinear Systems With Application to an Electro-Hydraulic Powertrain," Ph.D. in Mechanical Engineering. Urbana: University of Illinois at Urbana-Champaign, Urbana, IL, p. 255.