Single-phase liquid friction factors in microchannels

Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005

Volumn PART A, Issue , 2005, Pages 291-303

  Steinke, Mark E ^a   Kandlikar, Satish G ^a  

^a Kate Gleason College of Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FLOW INTERACTIONS; FLOW OF FLUIDS; FRICTION; NAVIER STOKES EQUATIONS; PRESSURE DROP;

FLOW THEORIES; FRICTION FACTORS; MICROCHANNELS; SINGLE PHASE LIQUID FLOW;

MICROELECTROMECHANICAL DEVICES;

EID: 27744602446     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/icmm2005-75112     Document Type: Conference Paper

References (48)

1. Adams, T.M., Dowling, M.F., Abdel-Khalik, S.I., and Jeter, S.M. "Applicability of traditional turbulent single-phase forced convection correlations to non-circular microchannels," International Journal of Heat and Mass Transfer 42, no. 23 (1999) 4411-4415.
2. Baviere, R., Ayela, F., Le Person, S. and Favre-Marinet, M. "An experimental study of water flow in smooth and rough rectangular micro-channels." International Conference on Microchannels and Minichannels ASME Publications (2004).
3. Bucci, A., Celata, G.P., Cumo, M., Serra, E. and Zummo, G. "Water single-phase fluid flow and heat transfer in capillary tubes." International Conference on Microchannels and Minichannels. Paper # 1037 ASME 1 (2003) 319-326.
4. Chen, R.Y. "Flow in the entrance region at low Reynolds numbers." Journal of Fluids Engineering 95 (1973) 153-158.
5. Chung, P.M.-Y., Kawaji, M. and Kawahara, A, "Characteristics of single-phase flow in microchannels." Proceedings of Fluids Engineering Division Summer Meeting, July 14-18, 2002, Montreal, Quebec, Canada ASME Publications (2002) 1219-1227.
6. Colebrook, C.F. "Turbulent flow in pipes with particular reference to the transition region between the smooth and rough pipe laws." J. of the Institution of Civil Engineers, London 11 (1938-1939) 133-156.
7. Curr, R.M., Sharma, D., and Tatchell, D.G. "Numerical Predictions of Some Three-Dimensional Boundary Layers in Ducts." Computational Methods in Applied Mechanical Engineering 1 (1972) 143-158.
8. Cuta, J.M., McDonald, C.E. and Shekarriz, A. "Forced convection heat transfer in parallel channel array microchannel heat exchanger." American Society of Mechanical Engineers, Heat Transfer Division, Advances in Energy Efficiency, Heat/Mass Transfer Enhancement HTD, v 338 (1996) 17-23.
9. Gui, F. and Scaringe, R.P. "Enhanced heat transfer in the entrance region of microchannels." Proceedings of the Intersociety Energy Conversion Engineering Conference (1995) 289-294.
10. Haaland, S.E. "Simple and explicit formulas for the friction factor in turbulent pipe flow." J. of Fluids Eng 105, no. 1 (1983) 89-90.
11. Hsieh, S.-S., Lin, C.-Y., Huang, C.-F. and Tsai, H.-H. "Liquid flow in a micro-channel." Journal of Micromechanics and Microengineering 14, no. 4 (2004) 436-445.
12. Jiang, X.N., Zhou, Z.Y., Huang, X.Y. and Liu, C.Y. "Laminar flow through microchannels used for microscale cooling systems." Proceedings of the Electronic Packaging Technology Conference, EPTC (1997) 119-122.
13. Judy, J., Maynes, D., and Webb, B.W. "Characterization of frictional pressure drop for liquid flows through microchannels," International Journal of Heat and Mass Transfer 45, no. 17 (2002) 3477-3489.
14. Jung, J.-Y. and Kwak, H.-Y. "Fluid flow and heat transfer in microchannels with rectangular cross section." International Conference on Microchannels and Minichannels, Paper #1032 1 (2003) 291-297.
15. Kakaç, S., Shah, R.K. and Aung, W. Handbook of Single-Phase Convective Heat Transfer John Wiley & Sons: New York (1987).
16. Kandlikar, S.G. and Grande, W.J. "Evolution of Microchannel Flow Passages - Thermohydraulic Performance and Fabrication Technology." Heat Transfer Engineering 24, no 1 (2003) 3-17.
17. Kandlikar, S.G. and Grande, W.J. " Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling - Thermohydraulic Performance Enhancement and Fabrication Technology." Heat Transfer Engineering 24, no. 1 (2004) 5-16.
18. Kandlikar, S.G., Schmitt, D., Carrano, A.L. and Taylor, J.B. "Characterization of surface roughness effects on pressure drop in single-phase flow." Physics of Fluids 17, no. 5 (2005).
19. Lee, P.S., Ho, J.C., and Xue, H. "Experimental study on laminar heat transfer in microchannel heat sink," The Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 30 May-1 June 2002, ITHERM 2002. IEEE Publications (2002) 379-386.
20. Lee, P.-S. and Garimella, S.V. "Experimental investigation of heat transfer in microchannels." Proceedings of the ASME Summer Heat Transfer Conference (2003) 391-397.
21. Mala, G.M., and Li, D.Q. "Flow characteristics of water in microtubes," International Journal of Heat and Fluid Flow 20, No. 2 (1999) 142-148.
22. Missaggia, L.J., Walpole, J.N., Liau, Z.L. and Phillips, R.J. "Microchannel heat sinks for two-dimensional high-power-density diode laser arrays." IEEE Journal of Quantum Electronics 25, no. 9 (1989) 1988-1992.
23. Moody, L.F. "Friction Factors for Pipe Flow." Transactions of the ASME 66, no. 8 (1944) 671-684.
24. Nikuradse, J. "Strmungsgesetze in rauhen rohren." V.D.I. Forschungsheft 361 (1933) 1-22.
25. Owhaib, W. and Palm, B. "Experimental investigation of single-phase convective heat transfer in circular microchannels." Experimental Thermal and Fluid Science 28, no. 2-3 (2004) 105-110.
26. Papautsky, I., Brazzle, J., Ameel, T. and Frazier, A.B. "Laminar fluid behavior in microchannels using micropolar fluid theory." Sensors and Actuators, A: Physical 73, no. 1-2 (1999) 101-108.
27. Park, H., Pak, J.J., Son, S.Y., Lim, G. and Song, I. "Fabrication of a microchannel integrated with inner sensors and the analysis of its laminar flow characteristics." Sensors and Actuators, A: Physical 103, no. 3 (2003) 317-329.
28. Peng, X.F., Wang, B.X., Peterson, G.P., and Ma, H.B. "Experimental investigation of heat transfer in flat plates with rectangular microchannels," International Journal of Heat and Mass Transfer 38, no. 1 (1995) 127-137.
29. Peng, X.F., and Peterson, G.P. "Effect of thermofluid and geometrical parameters on convection of liquids through rectangular microchannels," International Journal of Heat and Mass Transfer 38, no. 4 (1995) 755-758.
30. Peng, X. F., and Peterson, G.P., 1996, "Convective heat transfer and flow friction for water flow in microchannel structures," International Journal of Heat and Mass Transfer 39, no. 12 (1996) 2599-2608.
31. Pfund, D., Rector, D., Shekarriz, A., Popescu, A. and Welty, James "Pressure drop measurements in a microchannel." AIChE Journal 46, no 8 (2000) 1496-1507.
32. Qu, W., Mala, M., and Li, D."Heat transfer for water in trapizoid silicon microchannels," International Journal of Heat and Mass Transfer Vol. 43, (2000a) 3925-3936.
33. Qu, W., Mala, G.M., and Li, D. "Pressure-driven water flows in trapezoidal silicon microchannels," International Journal of Heat and Mass Transfer 43, no. 3 (2000b) 353-364.
34. Qu, W. and Mudawar, I. "Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink." International Journal of Heat and Mass Transfer 45, no. 12 (2002) 2549-2565.
35. Rahman, M,M. and Gui, F. "Experimental measurements of fluid flow and heat transfer in microchannel cooling passages in a chip substrate." Proceedings of the ASME International Electronics Packaging Conference, Sep 29-Oct 2 1993, Binghamton, NY, USA ASME publications 4-2 (1993a) 685-692.
36. Rahman, M.M. and Gui, F. "Design, fabrication, and testing of microchannel heat sinks for aircraft avionics cooling." Proceedings of the Intersociety Energy Conversion Engineering Conference 1 (1993b) 1-6.
37. Rahman, M.M. "Measurements of heat transfer in microchannel heat sinks," International Communications in Heat and Mass Transfer 27, no. 4 (2000) 495-507.
38. Riddle, R.A., Contolini, R.J. and Bernhardt, A.F. "Design calculations for the microchannel heatsink." Proceedings of the Technical Program - National Electronic Packaging and Production Conference 1 (1991) 161-171.
39. Shah, R.K. and London, A.L. "Laminar Flow Forced Convection in Ducts." Supplement 1 to Advances in Heat Transfer Academic, New York (1978).
40. Steinke, M.E. and Kandlikar, S.G. "Review of Single-Phase Heat Transfer Enhancement Techniques for Application in Microchannel, Minichannels and Microde vices." International Journal of Heat and Technology 22, no. 2 (2004) 3-11.
41. Steinke, M.E., Kandlikar, S.G., Magerlein, J.H., E.G. Colgan, and Raisanen, A.D. "Development of an Experimental Facility for Investigating Single-Phase Liquid Flow in Microchannels." International Conference on Microchannels and Minichannels Paper # ICMM05-75070 ASME Publications (2005).
42. Tso, C.P. and Mahulikar, S.P. "Multimode heat transfer in two-dimensional microchannel." American Society of Mechanical Engineers, EEP 26-2 (1999) 1229-1233.
43. Tu, X. and Hrnjak, P. "Experimental investigation of single-phase flow pressure drop through rectangular microchannels." International Conference on Microchannels and Minichannels, Paper # 1028 ASME Publications 1 (2003) 257-267.
44. Tuckerman, D.B., and Pease, R.F.W. "High-Performance Heat Sinking for VSLI," IEEE Electron Device Letters EDL-2 (1981) 126-129.
45. Vidmar, R.J., and Barker, R.J. "Microchannel Cooling for a High-Energy Particle Transmission Window, an RF Transmission Window, and VLSI Heat Dissipation," IEEE Transactions on Plasma Science 26, no. 3 (1998) 1031-1043.
46. Wu, H., and Cheng, P. "An experimental study of convective heat transfer in silicon microchannels with different surface conditions," International Journal of Heat and Mass Transfer 46, no. 14 (2003a) 2547-2556.
47. Wu, H., and Cheng, P. "Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios," International Journal of Heat and Mass Transfer 46, no. 14 (2003b) 2519-2525.
48. Xu, B., Ooi, K.T., Wong, N.T., and Choi, W.K. "Experimental investigation of flow friction for liquid flow in microchannels," International Communications in Heat and Mass Transfer 27, no. 8 (2000) 1165-1176.