Large Eddy simulation of flow and heat transfer in an internal cooling duct with high blockage ratio 45° staggered ribs

Proceedings of the ASME Turbo Expo

Volumn 3 PART A, Issue , 2005, Pages 107-119

  Viswanathan, Aroon K ^a   Tafti, Danesh K ^a   Abdel Wahab, Samer ^a,b  

^a Virginia Polytechnic Institute and State University   (United States)

^b Florida Turbine Technologies Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

LARGE EDDY SIMULATION; RIB GEOMETRY;

COMPUTER SIMULATION; EDDY CURRENTS; HYDRAULICS; HYDRODYNAMICS; TURBULENT FLOW;

HEAT TRANSFER;

EID: 27744554329     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2005-68086     Document Type: Conference Paper

References (38)

1. Bailey, J.C., Bunker, R.S., Heat Transfer and Friction in Channels with Very High Blockage 45° Staggered Turbulators, Proc. ASME Turbo Expo-2003-GT-38611.
2. Chanteloup, D., Juaneda, Y., Boles, A., Combined 3D Flow and Heat Transfer Measurements in a 2-pass Internal Coolant Passage of Gas Turbine Airfoils, Proc. ASME Turbo Expo:2002-GT-30214.
3. Iacovides, H., Jackson, D.C., Kelemenis,G., Launder, B.E., Yuan, Y.M., Flow and heat transfer in a rotating U-bend with 45° ribs. International Journal of Heat and Fluid Flow, Vol 22, pp 308-314., 2001.
4. th Int'l Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2002.
5. Azad, S., Uddin, M.J., Han, J.C., Moon, H.K., Glezer, B., Heat Transfer in a Two-Pass Rectangular Rotating Channel With 45-deg Angled Rib Turbulators, J. Turbomachinery 124, pp. 251-259, 2002.
6. th Joint Propulsion Conference, Boston.
7. Diette, C., Arts, T., Sgarzi, O., Laroche, E., Investigation of a High Aspect Ratio Rectangular Channel with High Blockage Ratio Rounded-Corner Ribs, Proceedings of ASME Turbo Expo 2004, Vienna, Austria. GT 2440-53163.
8. Al-Qahtani, M., Chen, H.C., Han, J.C., Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels With 45° Rib Turbulators, IGTI, No. 2001-GT-187.
9. Al-Qahtani, M., Chen, H.C., Han, J.C., A Numerical Study of Flow and Heat Transfer in Rotating Rectangular Channels with 45° Rib Turbulators by Reynolds Stress Turbulence Model, Proc. ASME Turbo Expo: 2002-GT-30216.
10. Bonhoff, B., Parneix, S., Leusch, J., Johnson, B.V., Schabacker, J., Bolcs, A., Experimental and numerical study of developed flow and heat transfer in coolant channels with 45 degree ribs, Int. J. of Heat and Fluid Flow,20, pp 311-319, 1999.
11. Tyagi, M., Saha, A.K., Acharya, S., Large Eddy Simulations of Rotating Square Duct with Normal Rib Turbulators, Third AFOSR Conference on DNS/LES, Univ. Texas, Arlington, August 2001.
12. Tyagi, M., Acharya, S., Large Eddy Simulations of Flow and Heat Transfer in Rotating Ribbed Duct Flows, Proceedings of ASME Turbo Expo 2004, GT2004-53924.
13. Murata, A., Mochizuki, S., Effect of Rib Orientation and Channel Rotation on Turbulent Heat Transfer in a Two-pass channel with Sharp 180 degree turns investigated by using Large Eddy Simulations, Int. J. Heat and Mass Transfer, 47(2005), 2599-2618.
14. Murata, A., Mochizuki, S., Effect of Centrifugal Buoyancy on Turbulent Heat Transfer in an Orthogonally Rotating Square Duct with Traverse or Angles Rib Turbulators, Int. J. Heat and Mass Transfer, 44(2001) 2739-2750.
15. Takahashi, T., Watanabe, K., Large Eddy Simulation of Flow and Heat Transfer in a Rectangular Channel with Crossed Angled Ribs, Proceedings of ASME Turbo Expo 2004, GT 2004-53673.
16. Abdel-Wahab, S., Tafti, D., Large Eddy Simulation of Flow and Heat Transfer in a Staggered 45 degrees Ribbed Duct, Proc. ASME Turbo Expo-2004-GT-53800.
17. Schabacker, J., Bolcs, A., Johnson, B.V., PIV Investigation of the Flow Characteristics in an Internal Coolant Passage with 45° Rib Arrangement. Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, Indiana, 1999, 99-GT-120.
18. Han, J.C., Zhang, P., Lee., Augmented Heat Transfer in Square Channels with Parallel, Crossed and V-shaped Angled Ribs, Journal of Heat, pp 590-596, 1991.
19. Johnson, B.V., Wagner, J.H., Steuber, GD., Yeh, F.C., Heat Transfer in Rotating Serpentine Passages with Trips Skewed to the Flow, ASME Journal of Turbomachinery, 116, pp 113-123, 1994.
20. Al-Hadhrami, L., Han, J.C., Effect of rotation on heat transfer in two-pass square channels with five different orientations of 45° angled turbulators, Int. J. of Heat and Mass Transfer, 653-669, 2003.
21. Patankar, S.V., Liu, C.H., Sparrow, E.M., Fully Developed Flow and Heat Transfer in Ducts having Streamwise Periodic Variations of Cross-Sectional Area, J. Heat Transfer, Vol 99, pp 180-186, 1977.
22. Germano, M., Piomelli, U., Moin, P., and Cabot, W.H., A dynamic subgrid-scale eddy viscosity model, Phys. Fluids, vol. 3, pp. 1760-1765, 1991.
23. Najjar, F.M., Tafti, D.K., Study of Discrete Test Filters and Finite Difference Approximations for the Dynamic Subgrid-Scale Stress Model, Phys. Fluids, vol 8, pp. 1076-1088, 1996.
24. Moin, P. Squires, K., Cabot, W., Lee, S., A Dynamic Sub-Grid-Scale Model for Compressible Turbulence and Scalar Transport, Phys. Fluids A, 3-11 pp. 2746-2757, 1991.
25. Chorin, A.J., Numerical Solution of the Navier-Stokes Equations, Maths Comput., Vol 22, pp 745-762.
26. Kim, J., Moin, P., Application of a Fractional-Step Method to Incompressible NAvier-Stokes, J. Computational Physics, Vol 59, pp 308-323.
27. Viswanathan A. and Tafti, D. K., Detached Eddy Simulation of Turbulent Flow and Heat Transfer in a Duct, HT-FED2004-56152, 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, July 11-15, Charlotte.
28. Patrick, W. and Tafti D. K. Computations of Flow Structure and Heat Transfer in a Dimpled Channel at Low to Moderate Reynolds number, HT-FED2004-56171, 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, July 11-15, Charlotte.
29. Abdel-Wahab, S. and Tafti, D. K., Large Eddy Simulations of Flow and Heal Transfer in a 90° Ribbed Duct with Rotation - Effect of Coriolis Forces, GT2004-53796, ASME Turbo Expo: 2004, Vienna, Austria.
30. Abdel-Wahab, S. and Tafti, D. K., Large Eddy Simulations of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Coriolis and Centrifugal Buoyancy Forces, GT2004-53799, ASME Turbo Expo: 2004, Vienna, Austria.
31. Sewall, E, and Tafti, D. K., Large Eddy Simulation of the Developing Region of a Stationary Ribbed Internal Turbine Blade Cooling Channel, GT2004-53832, ASME Turbo Expo: 2004, Vienna, Austria.
32. Sewall, E, and Tafti, D. K., Large Eddy Simulation of the Developing Region of a Rotating Ribbed Internal Turbine Blade Cooling Channel, GT2004-53833, ASME Turbo Expo: 2004, Vienna, Austria.
33. Guo, D. H. and Tafti, D. K., Effect of Inlet Flow Angle on Performance of Multilouvered Fin Heat Exchangers, Paper No. IMECE2003-41225, 2003 ASME International Mechanical Engineering Congress and R&D EXPO, Washington, D. C., USA, November 15-21, 2003.
34. Narayan, S. and Tafti, D. K., Electrokinetically Induced Mixing in a Microchamber, IMECE2003-41099, 2003 ASME International Mechanical Engineering Congress and R&D EXPO, Washington, D. C., USA, November 15-21, 2003.
35. Guo, D. H. and Tafti D. K., Effect of Louver Angle in Multilouvered Fins at Low Reynolds Numbers, Paper No. HTD2003-40035, Proceedings of HTD2003: ASME Summer Heat Transfer Conference, July 21-23, Las Vegas, Nevada, 2003.
36. Tafti D. K., Large Eddy Simulations of Heat Transfer in A Ribbed Channel for Internal Cooling of Turbine Blades, Paper No. GT2003-38122, Proceedings of ASME/IGTI Turbo Expo., Atlanta, Georgia, June 16-19, 2003.
37. Tafti, D.K., GenIDLEST - A Scalable Parallel Computational Tool for Simulating Complex Turbulent Flows, Proc. ASME Fluids Engineering Division, FED - vol. 256, ASME-IMECE, New York, 2001.
38. Incropera, F.P., Dewitt, D.P., Fundamentals of Heat and Mass Transfer, fifth edition, John Wiley and Sons, New York, 2002.