Large eddy simulation of the developing region of a stationary ribbed internal turbine blade cooling channel

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 735-747

  Sewall, Evan A ^a   Tafti, Danesh K ^a  

^a State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; COOLING; GAS TURBINES; HEAT TRANSFER; KINETIC ENERGY; MATHEMATICAL MODELS; REYNOLDS NUMBER;

AUGMENTATION; COOLING CHANNEL; DUCT; LARGE EDDY SIMULATION (LES);

TURBOMACHINE BLADES;

EID: 10344250959     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53832     Document Type: Conference Paper

References (35)

1. Iacovides, H., and Launder, B.E., 1991, "Parametric and Numerical Study of Fully Developed Flow and Heat Transfer in Rotating Rectangular Ducts," ASME Journal of Turbomachinery, 113, pp. 331-338.
2. Prakash, C., and Zerkle, R., 1992, "Prediction of Turbulent Flow and Heat Transfer in a Radially Rotating Square Duct," ASME Journal of Turbomachinery, 114, pp. 835-846.
3. Bo, T., Iacovides, H., and Launder, B.E., 1995, "Developing Buoyancy-Modified Turbulent Flow in Ducts Rotating in Orthogonal Mode," ASME Journal of Turbomachinery, 117, pp. 474-484.
4. Gu, X., Wu, H.-W., Schock, H.J., and Shih, T.I.-P., 2002, "Two-Equation Versus Reynolds-Stress Modeling in Predicting Flow and Heat Transfer in a Smooth U-Duct with and without Rotation," Proceedings of the ASME Turbo Expo 2002, Amsterdam, The Netherlands.
5. Liou, T.-M., Hwang, J.-J., and Chen, S.-H., 1993, "Simulation and measurement of enhanced turbulent heat transfer in a channel with periodic ribs on one principal wall," International Journal of Heat and Mass Transfer, 36-2, pp. 507-517.
6. Bonhoff, B., Parneix, S., Leusch, J., Johnson, B.V., Schabacker, J., and Bölcs, A., 1999, "Experimental and numerical study of developed flow and heat transfer in coolant channels with 45 degree ribs," International Journal of Heat and Fluid Flow, 20, pp. 311-319.
7. Saidi, A., and Sundén, B., 2001, "On Prediction of Thermal-Hydraulic Characteristics of Square-Sectioned Ribbed Cooling Ducts," ASME Journal of Turbomachinery, 123, pp. 614-620.
8. Ooi, A., Iaccarino, G., Durbin, P.A., and Behnia, M., 2002, "Reynolds averaged simulation of flow and heat transfer in ribbed ducts," International Journal of Heat and Fluid Flow, 23, pp. 750-757.
9. Bonhoff, B., Tomm, U., Johnson, B.V., and Jennions, I., 1997, "Heat Transfer Predictions for Rotating U-shaped Coolant Channels with Skewed Ribs and with Smooth Walls," Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, Orlando, Florida.
10. Jang, Y.-J., Chen, H.-C., and Han, J.-C., 2000, "Flow and Heat Transfer in a Rotating Square Channel With 45 deg Angled Ribs by Reynolds Stress Turbulence Model," ASME Journal of Turbomachinery, 123, pp. 124-132.
11. Lin, Y.-L., Shih, T.I.-P., Stephens, M.A., and Chyu, M.K., 2001, "A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without Rotation," ASME Journal of Heat Transfer, 123, pp. 219-232.
12. Al-Qahtani, M., Jang, Y.-J., Chen, H.-C., and Han, J.-C., 2002, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels with 45-deg Rib Turbulators," ASME Journal of Turbomachinery, 124, pp. 242-250.
13. Kajishima, T., and Miyake, Y., 1992, "A Discussion on Eddy Viscosity Models on the Basis of the Large Eddy Simulation of Turbulent Flow in a Square Duct," Computers Fluids, 21-2, pp. 151-161.
14. Murata, A., and Mochizuki, S., 1999, "Effect of cross-sectional aspect ratio on turbulent heat transfer in an orthogonally rotating rectangular smooth duct," International Journal of Heat and Mass Transfer, 42, pp. 3803-3814.
15. Murata, A., and Mochizuki, S., 2000, "Large eddy simulation with a dynamic subgrid-scale model of turbulent heat transfer in an orthogonally rotating rectangular duct with transverse rib turbulators," International Journal of Heat and Mass Transfer, 43, pp. 1243-1259.
16. Murata, A., and Mochizuki, S., 2001, "Comparison between laminar and turbulent heat transfer in a stationary square duct with transverse or angled rib turbulators," International Journal of Heat and Mass Transfer, 44, pp. 1127-1141.
17. Watanabe, K., and Takahashi, T., 2002, "LES Simulation and Experimental Measurement of Fully Developed Ribbed Channel Flow and Heat Transfer," Proceedings of the ASME Turbo Expo 2002, Amsterdam, The Netherlands.
18. Tafti, D.K., 2003, "Large-Eddy Simulations of Heat Transfer in a Ribbed Channel for Internal Cooling of Turbine Blades," Proceedings of the ASME/IGTI Turbo Expo 2003, Atlanta, Georgia.
19. Han, J.C., and Park, J.S., 1988, "Developing heat transfer in rectangular channels with rib turbulators," International Journal of Heat and Mass Transfer, 31-1, pp. 183-195.
20. Liou, T.-M., and Hwang, J.-J., 1992, "Developing Heat Transfer and Friction in a Ribbed Rectangular Duct With Flow Separation at Inlet," ASME Journal of Heat Transfer, 114, pp. 565-573.
21. Sparrow, E.M., and Tao, W.Q., 1984, "Symmetric vs asymmetric periodic disturbances at the walls of a heated flow passage," International Journal of Heat and Mass Transfer, 27-11, pp. 2133-2144.
22. Han, J.C., 1984, "Heat Transfer and Friction in Channels With Two Opposite Rib-Roughened Walls," Transactions of the ASME, 106, pp. 774-781.
23. Germano, M., Piomelli, U., Moin, P., and Cabot, W.H., 1991, "A dynamic subgrid-scale eddy viscosity model," Physics of Fluids A, 3-7, pp. 1760-1765.
24. Najjar, F.M., and Tafti, D.K., 1996, "Study of discrete test filters and finite difference approximations for the dynamic subgrid-scale stress model," Physics of Fluids, 8-4, pp. 1076-1088.
25. Lilly, D.K., 1992, "A proposed modification of the Germano subgrid-scale closure method," Physics of Fluids A, 4-3, pp. 633-635.
26. Moin, P., Squires, K., Cabot, W., and Lee, S., 1991, "A dynamic subgrid-scale model for compressible turbulence and scalar transport," Physics of Fluids A, 3-11, pp. 2746-2757.
27. Tafti, D.K., 2001, "GenIDLEST - A Scalable Parallel Computational Tool for Simulating Complex Turbulent Flows," Proceedings of the ASME Fluids Engineering Division, FED, 256, ASME-IMECE, New York.
28. Tafti, D.K., 2003, "Evaluating the Role of Subgrid Stress Modeling in a Ribbed Duct for the Internal Cooling of Turbine Blades," Submitted to International Journal of Heat and Fluid Flow, January 2004.
29. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Coriolis Forces," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
30. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a 90° Ribbed Duct with Rotation - Effect of Buoyancy Forces," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
31. Abdel-Wahab, S., and Tafti, D.K., 2004, "Large Eddy Simulation of Flow and Heat Transfer in a Staggered 45° Ribbed Duct," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.
32. Incropera, F.P., and DeWitt, D.P., 2002, Fundamentals of Heat and Mass Transfer, fifth edition, John Wiley and Sons, New York.
33. Rau, G., Çakan, M., Moeller, D., and Arts, T., 1998, "The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Straight Cooling Channel," ASME Journal of Turbomachinery, 120, pp. 368-375.
34. Wagner, J.H., Johnson, B.V., Graziani, R.A., and Yeh, F.C., 1992, "Heat Transfer in Rotating Serpentine Passages With Trips Normal to the Flow," ASME Journal of Turbomachinery, 114, pp. 847-857.
35. Graham, A., Sewall, E., Thole, K.A., "Flowfield Measurements in a Ribbed Channel Relevant to Internal Blade Cooling," Proceedings of the ASME Turbo Expo 2004, Vienna, Austria.