Investigation of subsequent viscoplastic deformation of austenitic stainless steel subjected to cyclic preloading

International Journal of Plasticity

Volumn 22, Issue 2, 2006, Pages 374-390

  Mayama, T ^a   Sasaki, K ^a  

^a HOKKAIDO UNIVERSITY   (Japan)

Author keywords

Creep; Cyclic loading; Dislocations; Electron microscopy; Mechanical testing; Stress relaxation; Viscoplastic material

Indexed keywords

CREEP; CYCLIC LOADS; DISLOCATIONS (CRYSTALS); ELECTRON MICROSCOPY; MECHANICAL TESTING; STAINLESS STEEL; STRAIN RATE; STRESS RELAXATION; TRANSMISSION ELECTRON MICROSCOPY;

CYCLIC PRELOADING; VISCOPLASTIC MATERIALS;

PLASTIC DEFORMATION;

EID: 25444446349     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2005.03.008     Document Type: Article

References (54)

1. F. Barlet, H. Aretz, J.W. Yoon, M.E. Karabin, J.C. Brem, and R.E. Dick Linear transformation-based anisotropic yield functions Int. J. Plasticity 21 2005 1009 1039
2. L. Bocher, P. Delobelle, P. Robinet, and X. Feaugas Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion-internal and external pressure Int. J. Plasticity 17 2001 1491 1530
3. F. Bron, and J. Besson A yield function for anisotropic materials. Application to aluminum alloys Int. J. Plasticity 20 2004 937 963
4. O. Cazacu, and F. Barlet A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals Int. J. Plasticity 20 2004 2027 2045
5. J.L. Chaboche Constitutive equations for cyclic plasticity and cyclic viscoplasticity Int. J. Plasticity 5 1989 247 302
6. D.-Y. Chiang, K.-H. Su, and C.-H. Liao A study on subsequent yield surface based on the distributed-element model Int. J. Plasticity 18 2002 51 70
7. H.-J. Christ, G. Hoffmann, and O. Öttinger History effects in metals during constant and variable amplitude testing I: wavy dislocation glide behaviour Mater. Sci. Eng. A201 1995 1 12
8. B.K. Chun, J.T. Jinn, and J.K. Lee Modeling the Bauschinger effect for sheet metals, part I: applications Int. J. Plasticity 18 2002 571 595
9. B.K. Chun, H.Y. Kim, and J.K. Lee Modeling the Bauschinger effect for sheet metals, part II: applications Int. J. Plasticity 18 2002 597 616
10. K. Chung, M. Lee, D. Kim, C. Kim, M.L. Wenner, and F. Barlet Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: part I: theory and formulation Int. J. Plasticity 21 2005 861 882
11. S.-H. Doong, D.F. Socie, and I.M. Robertson Dislocation substructures and nonproportional hardening J. Eng. Mater. Technol. 112 1990 456 464
12. E. El-Danaf, S.R. Kalidindi, and R.D. Doherty Influence of deformation path on the strain hardening behavior and microstructure evolution in low SFE FCC metals Int. J. Plasticity 17 2001 1245 1265
13. Y. El-Madhoun, A. Mohamed, and M.N. Bassim Cyclic stress-strain response and dislocation structures in polycrystalline aluminum Mater. Sci. Eng. A 359 2003 220 227
14. X. Feaugas On the origin of the tensile flow stress in the stainless steel AISI 316L at 300K: back stress and effective stress Acta. Mater. 47 1999 3617 3632
15. J. Gan, J.S. Vetrano, and M.A. Khaleel Microstructure characterization of dislocation wall structure in aluminum using transmission electron microscopy J. Eng. Mater. Technol. 124 2002 297 301
16. H. Garmestani, S.R. Kalidindi, L. Williams, C.M. Bacaltchuk, C. Fountain, E.W. Lee, and O.S. Es-Said Modeling the evolution of anisotropy in Al-Li alloys: application to Al-Li 2090-T8E41 Int. J. Plasticity 18 2002 1373 1393
17. L. Geng, Y. Shen, and R.H. Wagoner Anisotropic hardening equations derived from reverse-bend testing Int. J. Plasticity 18 2002 743 767
18. H. Haddou, M. Risbet, G. Marichal, and X. Feaugas The effects of grain size on the cyclic deformation behaviour of polycrystalline nickel Mater. Sci. Eng. A 379 2004 102 111
19. S. Hiwatashi, A.V. Bael, P.V. Houtte, and C. Teodosiu Modelling of plastic anisotropy based on texture and dislocation structure Comput. Mater. Sci. 9 1997 274 284
20. S. Hiwatashi, A.V. Bael, P.V. Houtte, and C. Teodosiu Prediction of forming limit strains under strain-path changes: application of an anisotropic model based on texture and dislocation structure Int. J. Plasticity 14 1998 647 669
21. O. Häusler, D. Schick, and Ch. Tsakmakis Description of plastic anisotropy effects at large deformations. part II: the case of transverse isotropy Int. J. Plasticity 20 2004 199 223
22. T. Hoc, and S. Forest Polycrystal modelling of IF-Ti steel under complex loading path Int. J. Plasticity 17 2001 65 85
23. H. Ishikawa Subsequent yield surface probed from its current center Int. J. Plasticity 13 1997 533 549
24. H. Ishikawa, and K. Sasaki Deformation induced anisotropy and memorized back stress in constitutive model Int. J. Plasticity 14 1998 627 646
25. W.P. Jia, and J.V. Fernandes Mechanical behaviour and the evolution of the dislocation structure of copper polycrystal deformed under fatigue-tension and tension-fatigue sequential strain paths Mater. Sci. Eng. A 348 2003 133 144
26. F. Jiao, W. Osterle, P.D. Portella, and J. Ziebs Biaxial path-dependence of low-cycle fatigue behaviour and microstructure of alloy 800H at room temperature Mater. Sci. Eng. A196 1995 19 24
27. S.R. Kalidindi Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals Int. J. Plasticity 17 2001 837 860
28. G. Kang, N. Ohno, and A. Nebu Constitutive modeling of strain range dependent cyclic hardening Int. J. Plasticity 19 2003 1801 1819
29. K. Kowalczyk, and W. Gambin Model of plastic anisotropy evolution with texture-dependent yield surface Int. J. Plasticity 20 2004 19 54
30. E. Krempl An experimental study of room temperature rate-sensitivity, creep and relaxation of AISI type 304 stainless steel J. Mech. Phys. Solids 27 1979 363 375
31. E. Krempl Models of viscoplasticity some comments on equilibrium (back) stress and drag stress Acta Mech. 69 1987 25 42
32. D. Kujawski, V. Kallianpur, and E. Krempl An experimental study of uniaxial creep, cyclic creep and relaxation of AISI type 304 stainless steel at room temperature J. Mech. Phys. Solids 28 1980 129 148
33. T. Kuwabara, K. Yoshida, K. Narihara, and S. Takahashi Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure Int. J. Plasticity 21 2005 101 117
34. T. Kuwabara, M. Kuroda, V. Tvergaard, and K. Nomura Use of abrupt strain path change for determining subsequent yield surface: experimental study with metal sheets Acta Mater. 48 2000 2071 2079
35. M. Lee, D. Kim, C. Kim, M.L. Wenner, R.H. Wagoner, and K. Chung Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: part II: characterization of material properties Int. J. Plasticity 21 2005 883 914
36. M. Lee, D. Kim, C. Kim, M.L. Wenner, and K. Chung Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions: part III: applications Int. J. Plasticity 21 2005 915 953
37. A.B. Lopes, F. Barlet, J.J. Gracio, J.F.F. Duarte, and E.F. Rauch Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear Int. J. Plasticity 19 2003 1 22
38. M. Mizuno, Y. Mima, M. Abdel-Karim, and N. Ohno Uniaxial ratchetting of 316FR steel at room temperature - part I: experiments J. Eng. Mater. Technol. 122 2000 29 34
39. F. Mollica, K.R. Rajagopal, and A.R. Srinivasa The inelastic behavior of metals subject to loading reversal Int. J. Plasticity 17 2001 1119 1146
40. N. Ohno A constitutive model of cyclic plasticity with a nonhardening strain region J. Appl. Mech. 49 1982 721 727
41. E. Tanaka, S. Murakami, and M. Ooka Effects of strain path shapes on non-proportional cyclic plasticity J. Mech. Phys. Solids 33 1985 559 575
42. P. Trivedi, D.P. Field, and H. Weiland Alloying effects on dislocation substructure evolution of aluminum alloys Int. J. Plasticity 20 2004 459 476
43. P. Tuǧcu, P.D. Wu, and K.W. Neale On the predictive capabilities of anisotropic yield criteria for metals undergoing shearing deformations Int. J. Plasticity 18 2002 1219 1236
44. Ch. Tsakmakis Description of plastic anisotropy effects at large deformations - part I: restrictions imposed by the second law and the postulate of Il'iushin Int. J. Plasticity 20 2004 167 198
45. L. Vincent, S. Calloch, and D. Marquis A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting Int. J. Plasticity 20 2004 1817 1850
46. H.-C. Wu Anisotropic plasticity for sheet metals using the concept of combined isotropic-kinematic hardening Int. J. Plasticity 18 2002 1661 1682
47. P.D. Wu, M. Jain, J. Savoie, S.R. MacEwen, P. Tuǧcu, and K.W. Neale Evaluation of anisotropic yield functions for aluminum sheets Int. J. Plasticity 19 2003 121 138
48. P.D. Wu, S.R. MacEwen, D.J. Lloyd, M. Jain, P. Tuǧcu, and K.W. Neale On pre-straining and the evolution of material anisotropy in sheet metals Int. J. Plasticity 21 2005 723 739
49. H. Yao, and J. Cao Prediction of forming limit curves using an anisotropic yield function with prestrain induced backstress Int. J. Plasticity 18 2002 1013 1038
50. F. Yoshida, J. Kondo, and Y. Kikuchi Viscoplastic behavior of sus304 stainless steel under cyclic loading at room temperature JSME Int. J. 32 1989 136 141
51. F. Yoshida, T. Uemori, and K. Fujiwara Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain Int. J. Plasticity 18 2002 633 659
52. F. Yoshida, and T. Uemori A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation Int. J. Plasticity 18 2002 661 686
53. A. Zisman, E. Nesterova, V. Rybin, and C. Teodosiu Interfacial misorientations and underlying slip activity of a shear microband in mild steel: TEM analysis and numerical simulation Scripta Mater. 46 2002 729 733
54. L.B. Zuev, V.I. Danilov, T.M. Poletika, and S.A. Barannikova Plastic deformation localization in commercial Zr-base alloys Int. J. Plasticity 20 2004 1227 1249