Description of plastic anisotropy effects at large deformations - Part I: Restrictions imposed by the second law and the postulate of Il'iushin

International Journal of Plasticity

Volumn 20, Issue 2, 2004, Pages 167-198

  Tsakmakis, Ch ^a,b  

^a KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^b DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Finite deformations; Kinematic hardening; Plastic anisotropy; Plastic spin; Postulate of Il'iushin; Rotational hardening

Indexed keywords

ANISOTROPY; HARDENING; KINEMATICS; PLASTICITY;

PLASTIC ANISOTROPY;

PLASTIC DEFORMATION;

EID: 0142166482     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(03)00013-5     Document Type: Article

References (107)

1. Aravas N. Finite elastoplastic transformations of transversely isotropic metals. International Journal of Solids and Structure. 29:1992;2137-2157.
2. Aravas N. Anisotropic plasticity and the plastic spin. Modelling Simul. Materials Science Engineering. 2:1994;483-504.
3. Aravas N., Aifantis E.C. On the geometry of slip and spin in finite plastic deformation. International Journal of Plasticity. 7:1991;141-160. 1.
4. Asaro R. Micromechanics of crystals and polycrystals. Hutchinson J.W., Wu T.Y. Advances in Applied Mechanics, Vol. 23. 1983;1-115 Academic Press, San Diego.
5. Asaro R., Rice J.R. Strain localization in ductile single crystals. Journal of Mechanics and Physics of Solids. 25:1977;309-338.
6. Backhaus G. Zur Fliegrenze bei allgemeiner Verfestigung. ZAMM. 48:1968;99-108.
7. Baltov A., Sawczuk A. A rule of anisotropic hardening. Acta Mechanica. 1:1964;81-92.
8. Barlat F., Lian J. Plastic behavior and stretchability of sheet metals - part I: a yield function for orthotropic sheet under plane stress condition. International Journal of Plasticity. 5:1989;51-66.
9. Barlat F., Becker R.C., Hayashida Y., Maeda Y., Yanagawa M., Chung K., Brem J.C., Lege D.J., Matsui K., Murtha S.J., Hattori S. Yielding description for solution strengthened aluminum alloys. International Journal of Plasticity. 13:1997;385-401.
10. Bassani J.L. Yield characterization of metals with transversely isotropic plastic properties. Int. J. Mech. Sci. 19:1977;651-660.
11. p in plasticity. Journal of Applied Mechanics. 47:1980;672-675.
12. Casey J., Naghdi P. A correct definition of elastic and plastic deformation and its computational significance. Journal of Applied Mechanics. 48:1981;983-985.
13. Casey J., Tseng M. A constitutive restriction related to convexity of yield surfaces in plasticity. Z. Angew. Math. Phys. 35:1984;478-496.
14. Chiang D.Y., Su K.H., Liao C.H. A study on subsequent yield surface based on the distributed-element model. International Journal of Plasticity. 18:2002;51-70.
15. Cho H., Dafalias Y.F. Distortional and orientational hardening at large viscoplastic deformations. International Journal of Plasticity. 12:1996;903-925. 6.
16. Chung K., Lee S.Y., Barlat F., Keum Y.T., Park J.M. Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential. International Journal of Plasticity. 12:1996;93-115.
17. Chung K., Yoon J.W., Richmond O. Ideal sheet forming with frictional constraint. International Journal of Plasticity. 16:2000;595-610.
18. Coleman B.D., Gurtin M.E. Thermodynamics with internal state variables. J. Chem. Phys. 47:1967;597-613.
19. Dafalias Y.F. Il'iushin's postulate and resulting thermodynamic conditions on elastic-plastic coupling. International Journal of Solids and Structure. 13:1977;239-251. 6.
20. Dafalias Y.F. The plastic spin concept and a simple illustration of its role in finite plastic transformations. Mechanics of Materials. 3:1984;223-233.
21. Dafalias Y.F. Issues on the constitutive formulation at large elastoplastic deformations, part I. kinematics Arch. Mech. 69:1987;119-138.
22. Dafalias Y.F. The plastic spin in viscoplasticity. International Journal of Solids and Structure. 26:1990;149-163.
23. Dafalias Y.F. On multiple spins and texture development. Case study: kinematic and orthotropic hardening. Arch. Mech. 100:1993;171-194.
24. Dafalias Y.F. Plastic spin. necessity or redundancy International Journal of Plasticity. 14:1998;909-931.
25. Dafalias Y.F., Aifantis E.C. On the microscopic origin of the plastic spin. Arch. Mech. 82:1990;31-48.
26. Dafalias Y.F., Rashid M.M. The effect of plastic spin on anisotropic material behavior. International Journal of Plasticity. 5:1989;227-246.
27. Diegele E., Jansohn W., Tsakmakis Ch. Finite deformation plasticity and viscoplasticity laws exhibiting nonlinear hardening rules Part I: constitutive theory and numerical integration. Computational Mechanics. 25:2000;1-12.
28. Diegele E., Hartmann St., Tsakmakis Ch. Finite deformation plasticity and viscoplasticity laws exhibiting nonlinear hardening rules Part II: representative examples. Computational Mechanics. 25:2000;13-27.
29. Ferron G., Makkouk R., Morreale J. A parametric description of orthotropic plasticity in metal sheets. International Journal of Plasticity. 10:1994;431-449.
30. Fosdick R., Volkmann E. Normality and convexity of the yield surface in non-linear plasticity. Quart. J. Appl. Math. 51:1993;117-127.
31. Gambin W., Barlat F. Modeling of deformation texture development based on rate independent crystal plasticity. International Journal of Plasticity. 13:1997;75-85.
32. van der Giessen E. Continuum models for large deformation plasticity. Part I: large deformation plasticity and the concept of a natural reference state. European Journal of Mechanics A/Solids. 8:1989;15-34.
33. van der Giessen E. Continuum models for large deformation plasticity. Part II: a kinematic hardening model and the concept of a plastically induced orientation tensor. European Journal of Mechanics A/Solids. 8:1989;89-108.
34. Green A.E., Naghdi P. Some remarks on elastic-plastic deformations at finite strains. International Journal of Engineering Sciences. 9:1971;1219-1229.
35. Häusler, O., Schick, D., Tsakmakis, C. Description of plastic anisotropy effects at large deformations. Part II: the case of transverse isotropy (in press).
36. Häusler, O., 1999. Anisotropes plastisches Fließen bei großen Deformationen. PhD thesis, FZKA 6351, Forschungszentrum Karlsruhe, Institut für Materialforschung.
37. Häusler, O., Tsakmakis, Ch., Aifantis, E. C., 1999. On anisotropic plastic flow. In: Bruhns, O. T., Stein, E. (Eds.), IUTAM Symposium on Micro- and Macrostructural Aspects of Thermoplasticity (pp. 69-78).
38. Häusler, O., Tsakmakis, C., 1997. Thermodynamically consistent formulation of finite deformation anisotropic plasticity laws. In: Bruhns, O. T., (Ed.), Mitteilungen aus dem Institut für Mechanik, Ruhr-Universität Bochum, 114, Große plastische Formänderungen, pp. 11:=14.
39. Hecker S.S. Yield surfaces in prestrained aluminum and copper. Metallurgical Transactions. 2:1971;2077-2086.
40. Hecker S.S. Influence of deformation history on yield locus and stress-strain behavior of aluminum and copper. Metallurgical Transactions. 4:1973;985-989.
41. Helling D.E., Miller A.K., Stout M.G. An experimental investigation of the yield loci of 1100-0 aluminum, 70:30 brass, and an overaged 2024 aluminum alloy after various prestrains. Journal of Engineering Materials and Technology, ASME. 108:1986;313-320.
42. Henshall G.A., Helling D.E., Miller A.K. Improvements in the MATMOD equations for modeling solute effects and yield-surface distortion. Krausz A.S., Krausz K. Unified Constitutive Laws of Plastic Deformation. 1996;153-227 Academic Press, New York.
43. Hill R. The Mathematical Theory of Plasticity. 1950;Oxford University Press, Oxford.
44. Hill R. On constitutive inequalities for simple materials - II. J. Mech. Phys. Solids. 16:1968;315-322.
45. Hill R., Rice J.R. Elastic potentials and the structure of inelastic constitutive laws. SIAM. 25:1973;448-461.
46. Hill R. Constitutive modelling of orthotropic plasticity in sheet metals. J. Mech. Phys. Solids. 38:1990;405-417.
47. Hosford W.F. The Mechanics of Crystals and Textured Polycrystals. 1993;Oxford University Press, New York, Oxford.
48. Huang H.M., Pan J., Tang S.C. Failure prediction in anisotropic sheet metals under forming operations with consideration of rotating principal stretch directions. International Journal of Plasticity. 16:2000;611-633.
49. Ikegami K. Experimental plasticity on the anisotropy of metals. Boehler J.P. Proceedings of the Euromech Colloquium 115. 1982;201-227 Editions du Centre National de la Recherche Scientique, Paris.
50. Imatani S., Saito T., Yamaguchi K. A plastic constitutive model for anisotropic materials and finite element analysis of strain localization process. JSME International Journal A. 38:1995;547-553.
51. Ishikawa H. Subsequent yield surface probed from its current center. International Journal of Plasticity. 13:1997;533-549.
52. Ishikawa H., Sasaki K. Yield surface of SUS304 under cyclic loading. Journal of Engineering Materials and Technology, ASME. 110:1988;364-371.
53. Ishikawa H., Sasaki K. Deformation induced anisotropy and memorized back stress in constitutive model. International Journal of Plasticity. 14:1998;627-646.
54. Karafillis A.P., Boyce M.C. A general anisotropic yield criterion using bounds and a transformation weighting tensor. J. Mech. Phys. Solids. 41:1993;1859-1886.
55. Khan A.S., Wang X. An experimental study on subsequent yield surface after finite shear prestraining. International Journal of Plasticity. 9:1993;889-905.
56. Kim J.B., Yang D.Y., Yoon J.W., Barlat F. The eect of plastic anisotropy on compressive instability in sheet metal forming. International Journal of Plasticity. 16:2000;649-676.
57. Kok S., Beaudoin A.J., Tortorelli D.A. A polycrystal plasticity model based on the mechanical threshold. International Journal of Plasticity. 18:2002;715-741.
58. Kowalewski Z.L., Sliwowski M. Effect of cyclic loading on yield surface evolution of 18G2A low-alloy steel. International Journal of Mechanical Sciences. 39:1997;51-68.
59. Kratochvil J., Dillon O.W. Jr. Thermodynamics of elastic-plastic materials as a theory with internal state variables. Journal of Applied Physics. 40:1969;3207-3218.
60. Li G.C., Zhu C. Formation of shear bands in plane sheet. International Journal of Plasticity. 11:1995;605-622.
61. Lin H.C., Naghdi M.P. Necessary and sufficient conditions for the validity of a work inequality in finite plasticity. Quart. J. Mech. Appl. Math. 42:1989;13-21.
62. Lin G., Havner K.S. A comparative study of hardening theories in torsion using the Taylor polycrystal model. International Journal of Plasticity. 12:1996;695-718.
63. Lopes A.B., Barlat F., Gracio J.J., Ferreira-Duarte J.F., Rauch E.F. Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear. International Journal of Plasticity. 19:2003;1-22.
64. Loret B. On the effect of plastic rotation in the finite deformation of anisotropic elastoplastic materials. Mechanics of Materials. 2:1983;287-304.
65. Loret B., Dafalias Y.F. The effect of anisotropy and plastic spin on fold formations. J. Mech. Phys. Solids. 40:1992;417-439.
66. Lubliner J. Normality rules in large-deformation plasticity. Mechanics of Materials. 5:1986;29-34.
67. Lubliner, J., 1990. Large-deformation plasticity. In: Plasticity Theory, chapter 8. Macmillan Publishing Company, New York, pp. 438-470.
68. Lucchesi M., Silhavy M. Il'iushin's conditions in non-isothermal plasticity. Arch. Rational Mech. Anal. 113:1991;121-163.
69. Mandel, J., 1971. Plasticité Classique et Visoplasticité. Number Courses and Lectures, No 97 in ICMS. Springer, Wien-New York.
70. Mandel J. Equations constitutives et directeurs dans les milieux plastiques et vis-coplastiques. International Journal of Solids and Structure. 9:1973;725-740.
71. Maugin G. The Thermodynamics of Plasticity and Fracture, chapter 5. 1992;Cambridge University Press, New York.
72. Miastkowski J. Analysis of the memory effect of plastically prestrained material. Archiwum Mechaniki Stosowanej. 20:1968;257-276.
73. Miastkowski J., Szczepinski W. An experimental study of yield surfaces of pre-strained brass. International Journal of Solids and Structures. 1:1965;189-194.
74. Nakamachi E., Hiraiwa K., Morimoto H., Harimoto M. Elastic/crystalline viscoplastic finite element analyses of single- and poly-crystal sheet deformations and their experimental verification. International Journal of Plasticity. 16:2000;1419-1441.
75. Nakamachi E., Xie C.L., Morimoto H., Morita K., Yokoyama N. Formability assessment of FCC aluminum alloy sheet by using elastic/crystalline viscoplastic finite element analysis. International Journal of Plasticity. 18:2002;617-632.
76. Naghdi P.M., Trapp J.A. On the nature of normality of plastic strain rate and convexity of yield surfaces in plasticity. Journal of Applied Mechanics. 42(E):1975;61-66.
77. Ning J., Aifantis E.C. Anisotropic and inhomogeneous plastic deformation of polycrystalline solids. Krausz A.S., Krausz A.J. Unified Constitutive Laws of Plastic Deformation. 1996;319-341 Academic Press, San Diego.
78. Ning J., Aifantis E.C. Anisotropic yield and plastic flow of polycrystalline solids. International Journal of Plasticity. 12:1996;1221-1240.
79. Oliferuk W., Świa̧tnicki W., Grabski M. Rate of energy storage and microstructure evolution during the tensile deformation of austenitic steel. Materials Science and Engineering. A161:1993;55-63.
80. Phillips A. The Foundations of Plasticity. Experiments. Theory and Selected Applications. 1979;CISM, Udine. pp. 189-271.
81. Phillips A., Das P.K. Yield surfaces and loading surfaces of aluminum and brass:an experimental investigation at room and elevated temperatures. International Journal of Plasticity. 1:1985;89-109.
82. Phillips A., Moon H. An experimental investigation concerning yield surfaces and loading surfaces. Acta Mechanica. 27:1977;91-102.
83. Phillips A., Tang J.L. The effect of loading path on the yield surface at elevated temperatures. International Journal of Solids and Structures. 8:1972;463-474.
84. Pourboghrat F., Karabin M.E., Becker R.C., Chung K. A hybrid membrane/shell method for calculating springback of anisotropic sheet metals undergoing axisymmetric loading. International Journal of Plasticity. 16:2000;677-700.
85. Rees D.W.A. Yield functions that account for the effects of initial and subsequent plastic anisotropy. Acta Mechanica. 43:1982;223-241.
86. Srinivasa A.R. On the nature of the response functions in rate-independent plasticity. International Journal of Non-Linear Mechanics. 32:1997;103-119.
87. Song C.R., Voyiadjis G.Z. Microstructure consideration with plastic spin and multiple back-stresses for large strain problems in soils. International Journal of Plasticity. 18:2002;1271-1289.
88. Stout M.G., Martin P.L., Helling D.E., Canova G.R. Multiaxial yield behaviour of 1100 aluminum following various magnitudes of prestrain. International Journal of Plasticity. 1:1985;163-174.
89. Trampczynski W. The experimental verification of the unloading technique for the yield surface determination. Archives of Mechanics. 44:1992;171-190.
90. Truesdell C., Noll W. The nonlinear field theories of mechanics. Flugge S. Handbuch der Physik, vol. III/3. 1965;Springer-Verlag, Berlin-Heidelberg-New York.
91. Tsakmakis C. On the loading conditions and the decomposition of deformation. Boehler J.-P., Kahn A.S. Anisotropy and localization of plastic deformation. 1991;335-356 Elsevier Applied Science, Springer, London & New York.
92. Tsakmakis C. Kinematic hardening rules in nite plasticity. Part I: a constitutive approach. Continuum Mech. Thermodyn. 8:1996;215-231.
93. Tsakmakis C. Remarks on Il'iushin's postulate. Arch. Mech. 49:1997;677-695.
94. Tsakmakis, C., 1997b. Anisotrope Plastizität. Presented in Research Center of Karlsruhe, unpublished.
95. Tsakmakis, C., Willuweit, A., 2001. A comparative study of kinematic hardening rules at finite deformations. Int. J. Non-Linear Mechanics (in press).
96. Tuǧcu P., Neale K.W. On the implementation of anisotropic yield functions into finite strain problems of sheet metal forming. International Journal of Plasticity. 15:1999;1021-1040.
97. Tuǧcu P., Wu P.D., Neale K.W. Finite strain analysis of simple shear using recent anisotropic yield criteria. International Journal of Plasticity. 15:1999;939-962.
98. Williams J.F., Svensson N.L. Locus of 1100-F aluminum. Journal of Strain Analysis. 5:1970;128-139.
99. Williams J.F., Svensson N.L. Effect of torsional prestrain on the yield locus of 1100-f aluminum. Journal of Strain Analysis. 6:1971;263-272.
100. Wu H.C. Anisotropic plasticity for sheet metals using the concept of combined isotropic-kinematic hardening. International Journal of Plasticity. 18:2002;1661-1682.
101. Wu H.C. On finite plastic deformation of anisotropic metallic materials. International Journal of Plasticity. 19:2003;91-119.
102. Wu H.C., Hong H.K., Lu J.K. An endochronic theory accounted for deformation induced anisotropy. International Journal of Plasticity. 11:1995;145-162.
103. Wu P.D., Jain M., Savoie J., MacEwen S.R., Tugcu P., Neale K.W. Evaluation of anisotropic yield functions for aluminum sheets. International Journal of Plasticity. 19:2003;121-138.
104. Yoshida F., Uemori T. A model of large-strain cyclic plasticity describing the Bauschinger eect and workhardening stagnation. International Journal of Plasticity. 18:2002;661-686.
105. Yoshida F., Uemori T., Fujiwara K. Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. International Journal of Plasticity. 18:2002;633-656.
106. Yoshimura, Y., 1959. Hypothetical theory of anisotropy and the Bauschinger effect due to plastic strain history. Aeronautical Research Institute, University of Tokyo, Report No. 349, pp. 221-247.
107. Zhou Y., Jonas J.J., Szabo L., Makinde A., Jain M., MacEwen S.R. Incorporation of an anisotropic (texture-based) strain-rate potential into three-dimensional finite element simulations. International Journal of Plasticity. 13:1997;165-181.