Thermal and Geometrically Nonlinear Stress Analyses of an Adhesively Bonded Composite Tee Joint with Double Support

Journal of Thermoplastic Composite Materials

Volumn 17, Issue 2, 2004, Pages 103-136

  Apalak, M Kemal ^a   Apalak, Z Gul ^a   Gunes, Recep ^a  

^a ERCIYES UNIVERSITY   (Turkey)

Author keywords

CFRP; Epoxy adhesive; Geometrical nonlinearity; Tee joint; Thermal stress analysis

Indexed keywords

ADHESIVE JOINTS; BOUNDARY CONDITIONS; CARBON FIBER REINFORCED PLASTICS; DEFORMATION; ELASTOPLASTICITY; HEAT TRANSFER; MATHEMATICAL MODELS; SHEAR STRESS; THERMAL LOAD; THERMAL STRESS; THERMOANALYSIS;

EPOXY ADHESIVES; GEOMETRICAL NONLINEARITY; TEE JOINTS;

COMPOSITE STRUCTURES;

EID: 1642633704     PISSN: 08927057     EISSN: None     Source Type: Journal    
DOI: 10.1177/0892705704033337     Document Type: Article

References (42)

1. Semerdjiev, S. (1970). Metal to Metal Adhesive Bonding, Business Books Ltd., London.
2. Adams, R.D. and Wake, W.C. (1984). Structural Adhesive Joints in Engineering, Elsevier Applied Science, London.
3. Kinloch, A.J. (1987). Adhesion and Adhesives, Chapman and Hall, London.
4. Lee, S.J. and Lee, D.G. (1995). Optimal-design of the Adhesively Bonded Tubular Single Lap Joint, J. Adhesion, 50(2-3): 165-180.
5. Kim, Y.G., Lee, S.J., Lee, D.G. and Jeong, K.S. (1997). Strength Analysis of Adhesively Bonded Tubular Single Lap Steel-steel Joints Under Axial Loads Considering Residual Thermal Stresses, J. Adhesion, 60(1-4): 125-140.
6. Kim, Y.G. and Lee, D.G. (1998). Influence of Fabrication Residual Thermal-stresses on Rubber-toughened Adhesive Tubular Single Lap Steel-steel Joints Under Tensile Load, J. Adhesion, 65(1-4): 163-185.
7. Reedy, E.D. and Guess, T.R. (1996). Butt Joint Strength Effect of Residual Stress and Stress Relaxation, J. Adhesion Science and Technology, 10(1): 33-45.
8. Ioka, S., Kubo, S., Ohji, K. and Kishimoto, J. (1996). Thermal Residual Stresses in Bonded Dissimilar Materials and Their Singularities, JSME Intl. J. Series A-Mechanics and Material Engineering, 39(2): 197-203.
9. Anifantis, N.K., Kakavas, P.A. and Papanicolaou, G.C. (1997). Thermal Stress Concentration Due to Imperfect Adhesion in Fiber Reinforced Composites, Composites Science and Technology, 57(6): 687-696.
10. Nakano, Y., Katsuo, M., Kawawaki, M. and Sawa, T. (1998). 2-Dimensional Thermal Stress Analysis in Adhesive Butt Joints Containing Hole Defects and Rigid Fillers in Adhesive Under Non-uniform Temperature Field, J. Adhesion, 65(1-4): 57-80.
11. Nakagawa, F., Sawa, T., Nakano, Y. and Katsuo, M. (1999). A 2-Dimensional Finite Element Thermal Stress Analysis of Adhesive Butt Joints Containing Some Hole Defects, J. Adhesion Science and Technology, 13(3): 309-323.
12. Katsuo, M., Nakano, Y. and Sawa, T. (1999). 2-Dimensional Transient Thermal Stress Analysis of Adhesive Butt Joints, J. Adhesion, 70(1-2): 75-93.
13. Humfeld, G.R. and Dillard, D.A. (1998). Residual Stress Development in Adhesive Joints Subjected to Thermal Cycling, Journal of Adhesion, 65(1-4): 277-306.
14. Abedian, A. and Szyszkowski, W. (1999). Effects of Surface Geometry of Composites on Thermal Stress Distribution - A Numerical Study, Composite Science and Technology, 59(1): 41-54.
15. Sawyer, J.W. and Cooper, P.A. (1981). Analytical and Experimental Results for Bonded Single Lap Joints with Preformed Adherends, AIAA Journal, 19(11): 1443-1451.
16. Adams, R.D. (1981): In: Kinloch, A.J. (ed.), Developments in Adhesives - 2, pp. 45-81, Elsevier Applied Science, London.
17. Harris, J.A. and Adams, R.D. (1984). Strength Prediction of Bonded Single Lap Joints by Non-linear Finite Element Methods, Intl. J. Adhesion and Adhesives, 4(2): 65-78.
18. Adams, R.D. and Harris, J.A. (1987). The Influence of Local Geometry on the Strength of Adhesive Joints, Intl. J. Adhesion and Adhesives, 7(2): 69-80.
19. Adams, R.D., Atkins, R.W., Harris, J.A. and Kinloch, A.J. (1986). Stress Analysis and Failure Properties of Carbon-fibre-reinforced-plastic/Steel Double Lap Joints, J. Adhesion, 20: 29-53.
20. Reddy, J.N. and Roy, S. (1988). Non-linear Analysis of Adhesively Bonded Joints, Intl. J. Non-linear Mechanics, 23(2): 97-112.
21. Edlund, U. and Klarbring, A. (1990). Analysis of Elastic-plastic Adhesive Joints Using a Mathematical Programming Approach, Computer Methods in Applied Mechanics and Engineering, 78: 19-47.
22. Edlund, U. and Klarbring, A. (1992). A Geometrically Non-linear Model of the Adhesive Joint Problem and its Numerical Treatment, Computer Methods in Applied Mechanics and Engineering, 96: 329-350.
23. Apalak, M.K. and Engin, A. (1997). Geometrically Non-linear Analysis of Adhesively Bonded Double Containment Cantilever Joint, J. Adhesion Science and Technology, 11(9): 1153-1195.
24. Apalak, M.K. (1999). Geometrically Non-linear Analysis of Adhesively Bonded Corner Joints, J. Adhesion Science and Technology, 13(11): 1253-1285.
25. Apalak, M.K. (2002). Effect of Geometrical Non-linearity on the Stress and Deformation States of Adhesive Joints, In: Mittal, K.L. (Ed.), Adhesive Joints: Formation, Characteristics and Testing, Vol. 2, VSP, Utrecht.
26. Apalak, M.K. (2002). On the Non-linear Elastic Stresses in an Adhesively Bonded Tee Joint with Double Support, J. Adhesion Science and Technology, 16(4): 459-491.
27. Shenoi, R.A. and Violette, F.L.M. (1990). A Study of Structural Composite Tee Joints in Small Boats, J. Composite Materials, 24: 644-666.
28. Blake, J.I.R., Shenoi, R.A., House, J. and Turton, T. (2001). Progressive Damage Analysis of Tee Joints with Viscoelastic Inserts, Composites Part A: Applied Science and Manufacturing, 32(5): 641-653.
29. Read, P.J.C.L. and Shenoi, R.A. (1999). Fatigue Behaviour of Single Skin FRP Tee Joints, International Journal of Fatigue, 21(3): 281-296.
30. Apalak, M.K. and Gunes, R. (2002). On Non-linear Thermal Stresses in an Adhesively Bonded Single Lap Joint, Computers and Structures, 80: 85-98.
31. Apalak, M.K., Gunes, R. and Fidanci, L. (2003). Geometrically Non-linear Thermal Stress Analysis of an Adhesively Bonded Tubular Single Lap Joint, Finite Elements in Analysis and Design, 39(3): 155-174.
32. Zienkiewicz, O.C. (1971). The Finite Element Method in Engineering Science, McGraw-Hill Company, UK.
33. Malvern, L.E. (1969). Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Englewood Cliffs, NJ.
34. Saada, AA. (1974). Elasticity- Theory and Applications, Pergamon Press, NY.
35. Zienkiewicz, O.C. and Taylor R.C. (1991). The Finite Element Method (Solid and Fluid Mechanics, Dynamics and Non-linearity), Vol. 2, McGraw-Hill Company, UK.
36. Wood, R.D. and Zienkiewicz, O.C. (1977). Computers and Structures, 7: 725-735.
37. Crisfield, M.A. (1991). Non-linear Finite Element Analysis of Solids and Structures, Vol. 1, John Wiley, NY.
38. Kleiber, M. (1989). Incremental Finite Element Modeling in Non-linear Solid Mechanics, Ellis Horwood, NY.
39. Reedy, J.N. (1996). Mechanics of Laminated Composite Plates (Theory and Analysis), CRC Press, Boca Raton, Florida.
40. Kakac, S. and Yener, Y. (1980). Convective Heat Transfer, Middle East Technical University Publications, no: 65, Turkey.
41. Silva, L.F.M. and Adams, R.D. (2002). The Strength of Adhesively Bonded T-joints, Intl. J. Adhesion and Adhesives, 22(4): 311-315.
42. Sheppard, A. Kelly, D. and Tong, L. (1998). A Damage Zone Model for the Failure Analysis of Adhesively Bonded Joints, Intl. J. Adhesion and Adhesives, 18: 385-400.