On improving energy utilization in hydraulic booms

Acta Polytechnica Scandinavica, Mechanical Engineering Series

Volumn , Issue 160, 2002, Pages

  Liang, Xingui ^a  

^a TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

Energy utilization; Fluid power; Hydraulic boom

Indexed keywords

ACTUATORS; CAVITATION; CLOSED LOOP CONTROL SYSTEMS; COMPUTER SIMULATION; CYLINDERS (SHAPES); ENERGY UTILIZATION; OPTIMIZATION; PISTONS; POWER TRANSMISSION; PRESSURE EFFECTS; SENSORS; VALVES (MECHANICAL);

ENERGY RECOVERY SYSTEMS; HYDRUALIC BOOMS;

HYDRAULICS;

EID: 0036395802     PISSN: 0001687X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (61)

1. th Scandinavian International Conference on Fluid Power, SICFP'97, 1997 May, Linköping, Sweden.
2. Andersson, B.R. and Jansson, A., Load sensing directional valves, current technology and future development, the Third Scandinavian International Conference on Fluid Power, May 1993, Linköping, Sweden.
3. Baché, W. and Zaehe, B., Electrohydraulic load sensing, SAE Transactions Vol.100, 1991.
4. Backé, W., Hydraulic drives with high efficiency, Fluid Power Systems and Technology ASME 1995, FPST-Vol. 2, pp45-73.
5. Beiner, L., A min-max problem of optimal actuator placement for lifting, Robotica (1995). © 1995 Cambridge University Press.
6. Beiner, L., Minimum -force redundancy control of hydraulic cranes, Mechatronics, Vol.7, No.6, 1997.
7. Brayton, R.K., Director, S.W., Hachtel, G.D., and Vidigal, L., A new algorithm for statistical circuit design based on quasi-newton methods and function splitting, IEEE Trans. Circuits and Systems, Vol. CAS-26, pp784-794, Sept. 1979.
8. Canudas, C. and Ramirez, J., Optimal torque control for current-fed induction motors, IEEE-Transaction on Automatic Control, May 1999. Vol 22, No. 5, pp.1084-1089.
9. Caterpillar Inc., System and method for controlling an independent metering valve, United States patent No.5497140, 1999.
10. Craig, J., Introduction to robotics mechanics and control, Second version, Addison-Wesley Publishing Company, 1989.
11. Curtis, C.H., Energy storage systems for public service vehicles, Integrated Engine Transmission Systems, C197/86, IMechE 1986, 117-126.
12. Durkovit, R. and Bulatovic, R., Modelling and optimisation of the working mechanism motion of the hydraulic excavator, Modelling, Simulation and Control B: Mechanical & Thermal Engineering, Chemistry V30 n 3 1990, pp23-32.
13. Elder, F.T., Otis, D.R. and Dewey, C., Accumulator-charged hydrostatic drive for cars save energy, Hydrostatics & Pneumatics, 1974, pp180-183.
14. Erdman, A.G. and Sandor, G.N., Mechanism Design: Analysis and Synthesis, Vol. 1, Prentice Hall, Inc., 1984.
15. Eriksson, B., Optimal force control to improve hydraulic drives, Stockholm 1996, Licentiate Thesis, Royal Institute of technology, Sweden.
16. st FPNI-PHD Symposium, Hamburg 2000, pp449-465.
17. Graig, J., Introduction to robotics mechanics and control, Second version, Addison-Esley Publishing Company, 1989.
18. Guillon, M., Non-symmetrical cylinders and valves under non-symmetrical loading conditions, the Second Fluid Power Symposium, January 1971, Guildford, England.
19. Han, S.P., A globally convergent method for nonlinear programming, J. of Optimisation Theory and Applications, Vol. 22, p297, 1977.
20. Hu, F.Z. and Edge, K., An adaptive load-sensing hydrostatic transmission system, 4th Scandinavian International Conference on Fluid Power, Linköping, Sweden, May 1997.
21. Ibidapo, O., Optimal actuators placements for the active control of flexible structures, Journal of Mathematical analysis and Applications v105n1 Jan 1985, pp12-25.
22. Ivantysynov, M., Pump controlled actuator-a realistic alternative for heavy duty manipulators and robots, Development in Fluid Power Control of Machinery and manipulators, edited by Andrzej Garbacik and Jacek Stecki, Graco 2000, pp183-208.
23. Jacobs, E., Energy conversation ideas for '80s, Hydraulics & Pneumatics, January 1980.
24. Jansson, A. and Palmberg, J.-O., Separate controls of meter in and meter-out orifices in mobile hydraulic systems, International Off-Highway & Power Plant Congress and Exposition, Milwaukee, WI, USA, 1990.
25. Käppi, T., Modelling and simulation utilized in research and development of mobile hydraulics, Espoo 2001, ISBN 951-666-564-0. ISSN 0001-687X.
26. Kim, S.D., Cho, H.S. and Lee, C.O., Stability Analysis of a load-sensing hydraulic system, Proc Instn Mech Engrs 1988, Vol. 202 No. A2, 79-88.
27. Kordak, R., The hydraulic trainer volume 6 - Hydrostatic Drives with Control of the secondary units, 2nd Edition, Mannesmann Rexroth GmbH, Lohr am Main, 1996.
28. Kordak, R., Practische Auslegung sekundärgeregelter antriebssysteme, Ölhydraulik und Pneumatik Nr. 11, 1982.
29. Krus, P., On load sensing fluid power system, Linjöping Studies in Science and Technology, Dissertations No. 198, Linköping, 1998.
30. Lambeck, R.P., Energy-saving controls for pumps, Machine Design, February 1980.
31. Lantto, B., Palmberg, J. and Krus, P., Static and dynamic performance of mobile load-sensing systems with two different types of pressure-compensated valves, SAE transfactions V99 n Sect 2 1990, pp251-265.
32. Liang, X.G., Virvalo, T. and Linjama, M., The influence of control valves on the efficiency of a hydraulic crane, 6th Scandinavian International Conference of Fluid Power, Tampere, Finland, May 1999.
33. Liang, X. and Virvalo, T., Energy reutilization and balance analysis in a hydraulic crane, 5th International Conference on Fluid Power Transmission and Control, Hangzhou, China, April 2001, pp306-310.
34. Liang, X. and Virvalo, T., What's Wrong with Energy Utilization in Hydraulic Cranes, 5th International Conference on Fluid Power Transmission and Control, Hangzhou, China, April 2001, pp419-424.
35. Liang, X. and Virvalo, T. Development and Research of an Energy-Saving Drive in a Hydraulic Crane, 7th Scandinavian International Conference on Fluid Power, Linköping, Sweden, May 30-June 01 2001, Volume 2, pp 151-161.
36. Liang, X. and Virvalo, T. An energy recovery system for a hydraulic crane, Journal of Mechanical Engineering Science, Proceedings of the Institute of Mechanical Engineers 2001 Vol. No. C6, pp737-744.
37. Liang, X. and Virvalo, T., Accumulator-charged drive for A hydraulic boom to save energy, Proceedings of 2002 ASME International Mechanical Engineering Congress and Exposition, Louisiana, USA, November 2002. (Accepted).
38. Linjama, M., The modelling and actuator space control of flexible hydraulic cranes, Espoo 1998. ISBN 952-5148-54-8. ISSN 0001-687X.
39. Luomaranta, M., A stable electro-hydraulic load sensing system based on a micro-controller, 6th Scandinavian International Conference of Fluid Power, Tampere, Finland, May 1999, pp419-432.
40. Lowther and Frank, E., Vehicle braking and kinetic energy recovery system, patent application number: US 197800094282, September 22, 1981.
41. Madsen, K. and Schjaer-Jacobsen, H. Algorithms for worst case tolerance optimization, IEEE Transactions of Circuits and Systems, Vol. CAS-26, Sept. 1979.
42. Mattila, J. On energy-efficient motion control of hydraulic manipulators, Tampere 2000. Tampere University of Technology Publications 312.
43. Merrit, H.E., Hydraulic control systems, 1967 by John Wiley and Sons, Inc.
44. th Scandinavian International Conference of Fluid Power, Tampere, Finland, May 1999, pp903-920.
45. Pan, S., Fronczak, F.J., and Beachley, N.H., The techniques for improving the efficiency of agricultural fluid power system, SAE Spec Publ Fluid Power Technology & System, 1986.
46. Paul, L., Electro-modulated control of supply pressure in hydraulic systems SAE Technical paper Series Aerospace technology Conference and Exposition, Long Beach, September 1991.
47. Peshkin, M.A., Sanderson, A.C., Minimization of energy in quasistatic manipulation, Proceedings-1988 IEEE International Conference on Robotics and Automation, USAIEEE New York, pp421-426.
48. Powell, M.J.D., A fast algorithm for nonlinear constrained optimisation calculations, numerical analysis, ed. G.A. Watson, Lecture Notes in Mathematics, Springer Verlag, Vol. 630, 1978.
49. Qureshi, A.S., Energy conservation and proportional control with load-sensing hydraulic systems, SAE Spec Publ SP-479, Energy Sav with Fluid Power Syst., 1981.
50. th International Conference on Fluid Power Transmission and Control, ICFP'2001, pp296-301.
51. Sakurai, Y. and Takahashi, K., Evaluation of the dynamic overall efficiency for a hydraulic system, Proceedings of the 4th International Conference on Fluid Power Transmission and Control, 1993, Hangzhou, China.
52. Shoup, T.E., A practical guide to computer methods for engineers, University of Houston, Pretice-Hall, Inc., NJ 07632.
53. Sutherland, G.H., Quality of motion and force transmission, Mechanism and Machine Theory 16 (1981).
54. Ultronis, Electrohydraulic proportional control valve assemblies, European Patent EP 0809737B1, 1999.
55. Vaughan N.D. and Dorey, R.E., Hydraulic accumulator energy storage in a city bus, Integrated Engine Transmission Systems, C186/86 IMechE 1986, pp105-116.
56. Virvalo, T., On the efficiency of hydraulic booms and manipulators, International Science Forum on Developments in Fluid Power Control of Machinery and Manipulators, Cracow'98.
57. Weber, R.T., Controlling pumps for performance, efficiency, Hydraulic and Pneumatics, May 1994.
58. Weinreb, A., and Bryson, A.E., Minimum-time control of a two -link robot arm, IFC Control Application of Nonlinear Programming and Optimisation, Capri, Italy, 1985.
59. Yoshifuma, M. and Hiroyuki, O., Optimal force control of elastic robot with contact motion to environment, Proceedings-1998 IEEE International Conference on Robotics and Automation, AMC'98-Coimbra, pp228-233.
60. Zheng, Y.F. and Luh, J.Y.S., Optimal load distribution for two industrial robots handling a single object, Proceedings-1988 IEEE International Conference on Robotics and Automation, USAIEEE New York, pp344-349.
61. Zheng, Y.F. and Luh, J.Y.S., Joint torques for control of two coordinating moving robots, ibid, pp1375-1380.