A new concept for decoupling the cutting forces due to tool flank wear and chip formation in hard turning

Machining Science and Technology

Volumn 2, Issue 1, 1998, Pages 77-90

  Wang, J Y ^a   Liu, C R ^a  

^a SCHOOL OF INDUSTRIAL ENGINEERING   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

LOADS (FORCES); MICROSTRUCTURE; SURFACE PROPERTIES; TEMPERATURE DISTRIBUTION; TURNING; WEAR OF MATERIALS;

CHIP FORMATION;

CUTTING;

EID: 0031645286     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1080/10940349808945660     Document Type: Article

References (35)

1. R. Snoeys, M. Maris, and B. J. Peters. "Thermally-induced damaging in grinding," Annals of CIRP, 27(2) (1978) 571-581.
2. M. C. Shaw and A. Vyas, "Heat-affected zones in grinding steel." Annals of CIRP, 43(1) (1994) 279-282.
3. W. König, M. Klinger, and R. Link, "Machining hard materials with geometrically defined cutting edges: Field of applications and limitations." Annals of CIRP, 39(2) (1990) 61-64.
4. C. R. Liu and S. Mittal, "Single-step superfinish hard machining: Feasibility and feasible cutting conditions." Robotics & Computer-Integrated Manufacturing, 12(1) (1996) 15-27.
5. C. R. Liu and S. Mittal, "Single-step superfinishing using hard machining resulting in superior surface integrity." Journal of Manufacturing Systems, 14(2) (1995) 129-133.
6. W. König, R. Komanduri, H. K. Tönshoff, and G. Ackershott, "Machining of hard materials." Annals of CIRP, 33(2) (1984) 417-427.
7. K. Nakayama, M. Arai, and T. Kanda, "Machining characteristics of hard materials." Annals of CIRP, 37(1) (1988) 89-92.
8. M. Ogata, "Einsatz von pcbn-werkzeugen in der production." VDI Berichte, 762 (1989) 271-279.
9. T. I. El. Wardany, M. A. Elbestawi, and M. H. Attia, Surface Finish in Turning of Hardened Steel, ASME Vol. PED 62, (1992) 141-159.
10. W. König, A. Berktold, and K. F. Koch, "Turning versus grinding - a comparison of surface integrity aspects and attainable accuracies." Annals of CIRP, 42(1) (1993) 39-43.
11. H. K. Tönshoff, D. Brandt, and H. G. Wobker, "Potential and limitation of hard turning." 1st International Machining and Grinding Conference, Dearborn, Michigan, Sept. (1995a) 965-978.
12. H. K. Tönshoff, H. G. Wobker, and D. Brandt, "Tribological aspects of hard turning with ceramic tools." Journal of the Society of Tribologists and Lubrication Engineers, 51(2) (1995b) 163-168.
13. J. A. Bailey, S. Jeelani, and S. E. Becker, "Surface integrity in machining aisi 4340 steel." Journal of Engineering for Industry, (1976) August 999-1007.
14. E. G. Loewen and M. C. Shaw, "On the analysis of cutting-tool temperatures." Transactions of the ASME, (1954) Feb. 217-231.
15. A. C. Rapier, "A theoretical investigation of the temperature distribution in the metal cutting process." Brit J. Appl. Phys., 5(11) (1954) 400-405.
16. A. O. Tay, M. G. Stevenson, and G. de Vahl Davis, "Using the finite element method to determine temperature distributions in orthogonal machining." Proc. Instn. Mech. Engrs., 188(55/74) (1974) 627-638.
17. A. O. Tay, M. G. Stevenson, G. de Vahl Davis, and P. K. O. Oxley, "A numerical method for calculating temperature distributions in machining, from force and shear angle measurement." International Journal of Machine Tool Design and Research, 16 (1976) 335-349.
18. M. G. Stevenson, P. K. Wright, and J. G. Chow, "Further developments in applying the finite element method to the calculation of temperature distributions in machining and comparisons with experiment." Journal of Engineering for Industry, 105 (1983) 149-154.
19. T. H. C. Childs, K. Maekawa, and P. Maulik, "Effects of coolants on temperature distribution in metal machining." Materials Science and Technology, 4 Nov. (1988) 1006-1019.
20. J. S. Strenkowski and K. J. Moon, "Finite element prediction of chip geometry and tool/workpiece temperature distributions in orthogonal metal cutting." Journal of Engineering for Industry, 112 (1990) 313-318.
21. B. T. Chao and K. J. Trigger, "Temperature distribution at tool-chip and toolwork interface in metal cutting." Transactions of the ASME, (1958) Feb. 311-320.
22. P. D. Muraka, G. Barrow, and S. Hinduja, "Influence of the process variables on the temperature distribution in orthogonal machining using the finite element method." International Journal of Mechanical Sciences, 21 (1979) 445-456.
23. X. Li, E. M. Kopalinsky, and P. L. B. Oxley, "A numerical method for determining temperature distributions in machining with coolant. Part 1: Modeling the process." Proc. Instn. Mech. Engrs., 209 (1995) 33-43.
24. Z. C. Lin and W. C. Pan, "A thermoelastic-plastic large deformation model for orthogonal cutting with tool flank wear. Part I: Computation procedures." International Journal of Mechanical Sciences, 35(10) (1993) 829-840.
25. G. Boothroyd, J. M. Eagle, and A. W. J. Chisholm, "Effect of tool flank wear on the temperature generated during metal cutting." Proc. of the MTDR, (1967) 667-680.
26. N. N. Zorev, Metal Cutting Mechanics. Pergamon Press, New York (1966).
27. C. R. Liu and M. M. Barash, "The mechanical state of the sublayer of a surface generated by chip-removal process. Part 2: Cutting with a tool with flank wear." Journal of Engineering for Industry, (1976) Nov. 1203-1208.
28. M. E. Merchant, "Mechanics of the metal cutting process." Journal of Applied Physics, 16(6) (1945) 318-324.
29. K. Nakayama, "The formation of saw-toothed chip in metal cutting." Proc. of the International Conference on Production Engineering, (1974) Tokyo, 572-577.
30. R. Komanduri, "Some clarifications on the mechanics of chip formation when machining titanium alloys." Wear, 76 (1982) 15-34.
31. M. A. Davis, Y. Chou, and C. J. Evans, "On chip morphology, tool wear and cutting mechanics in finish hard turning." Annals of CIRP, 45(1) (1996) 77-82.
32. M. C. Shaw and A. Vyas, "Chip formation in the machining of hardened steel." Annals of CIRP, 41(1) (1993) 29-33.
33. J. C. Jaeger, "Moving sources of heat and the temperature at sliding contacts." J. Proc. Roy. Soc., 76 New South Wales (1942) 203-224.
34. J. Orlich, "The austenization process during rapid heating and impulse heating of steel." Traitment Therm., 90 (1974) 69-75.
35. M. A. Elbestawi, A. K. Srivastava, and T. I. El-Wardany, "A model for chip formation during machining of hardened steel." Annals of CIRP, 45(1) (1996) 71-76.