Processing nanostructured materials: An overview

JOM

Volumn 52, Issue 12, 2000, Pages 41-45

  Shaw, Leon L ^a  

^a UNIVERSITY OF CONNECTICUT   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AMORPHOUS MATERIALS; CONSOLIDATION; CRYSTALLIZATION; ELECTRODEPOSITION; POWDERS; PROCESS ENGINEERING;

BULK NANOSTRUCTURED MATERIALS;

NANOSTRUCTURED MATERIALS;

EID: 0034475294     PISSN: 10474838     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11837-000-0068-2     Document Type: Article

References (90)

1. C.C. Koch et al., "Ductility of Nanostructured Materials," MRS Bull., 24 (2) (1999), pp. 54-58.
2. D. van Heerden, E. Zolotoyabko and D. Shechtman, "Microstructure and Strain in Electrodeposited Cu/Ni Multilayers," J. Mater. Res., 11 (11) (1996), pp. 2825-2833.
3. R.R. Oberle and R.C. Cammarata, "Dependence of Hardness on Modulation Amplitude in Electrodeposited Cu-Ni Compositionally Modulated Thin Films," Scr. Metall. Mater., 32 (1995), p. 583.
4. G. Palumbo, S.J. Thorpe, and K.T. Aust, "On the Contribution of Triple Junctions to the Structure and Properties of Nanocrystalline Materials," Scr. Metall. Mater., 24 (1990), pp. 1347-1350.
5. C. Cheung et al., "Electrodeposition of Nanocrystalline Ni-Fe Alloys," Nanostruct. Mater., 5 (5) (1995), pp. 513-523.
6. N. Wang et al., "Room Temperature Creep Behavior of Nanocrystalline Nickel Produced by an Electrodeposition Technique," Mater. Sci. Eng., A237 (1997), pp. 150-158.
7. D.M. Tench and J.T. White, "Tensile Properties of Nanostructured Ni-Cu Multilayered Materials Prepared by Electrodeposition," J. Electrochem. Soc., 132 (2) (1991), pp. 3757-3758.
8. L. Wang et al., "Growth Mechanism and Structure of Electrodeposited Cu/Ni Multilayers," Thin Solid Films, 261 (1995), pp. 160-167.
9. S. Menezes and D.P. Anderson, "Wavelength-Property Correlation in Electrodeposited Ultrastructured Cu-Ni Multilayers," J. Electrochem. Soc., 137 (2) (1990), pp. 440-444.
10. D.S. Lashmore and M.P. Dariel, "Electrodeposited Cu-Ni Textured Superlattices," J. Electrochem. Soc., 135 (5) (1988), pp. 1218-1221.
11. F. Ebrahimi and D. Kong, "Effect of Microstructure on Strength and Fracture of Electrodeposited Cu/Ni Layered Nano-Composites," Scr. Mater., 40 (5) (1999), pp. 609-616.
12. F. Ebrahimi et al., "Mechanical Properties of Nanocrystalline Nickel Produced by Electrodeposition," Nanostruct. Mater., 11 (3) (1999), pp. 343-350.
13. H. Ferkel, B. Muller and W. Riehemann, "Electrodeposition of Particle-Strengthened Nickel Films," Mater. Sci. Eng., A234-236 (1997), pp. 474-476.
14. D. Tench and J. White, "Enhanced Tensile Strength for Electrodeposited Nickel-Copper Multilayer Composites," Metall. Trans., 15A (11) (1984), pp. 2039-2040.
15. K. Lu, "Nanocrystalline Metals Crystallized from Amorphous Solids: Nanocrystallization, Structure and Properties," Mater. Sci. Eng., R16 (4) (1996), pp. 161-221.
16. T.R. Haasz et al., "Intercrystalline Density of Nanocrystalline Nickel," Scr. Metall. Mater., 32 (3) (1995), pp. 423-426.
17. H. Kimura, "High-Strength Intermetallic TiAl Synthesized via High-Temperature Crystallization of the Amorphous Alloy," Philos. Mag., A73 (3) (1996), pp. 723-737.
18. M.L. Sui, S. Patu, and Y.Z. He, "Influence of Interfaces on the Mechanical Properties in Polycrystalline Ni-P Alloys with Ultrafine Grains," Scr. Metall. Mater., 25 (1991), pp. 1537-1542.
19. M. Xiao and Q. P. Kong, "Creep Behavior of a Nanocrystalline Fe-B-Si Alloy," Scr. Mater., 36 (3) (1997), pp. 299-303.
20. A.A. Popov et al., "Structural and Mechanical Properties of Nanocrystalline Titanium Processed by Severe Plastic Deformation," Scr. Mater., 37 (7) (1997), pp. 1089-1094.
21. R.Z. Valiev, "Structure and Mechanical Properties of Ultrafine-Grained Metals," Mater. Sci. Eng., A234-236 (1997), pp. 59-66.
22. S. Ferrasse et al., "Microstructure and Properties of Copper and Aluminum Alloy 3003 Heavily Worked by Equal Channel Angular Extrusion," Metall. Mater. Trans., 28A (1997), p. 1047.
23. M. Kawazoe et al., "Elevated Temperature Mechanical Properties of A 5056 Al-Mg Alloy Processed by Equal-Channel-Angular-Extrusion," Scr. Mater., 36 (6) (1997), pp. 699-705.
24. R.Z. Valiev et al., "Deformation Behavior of Ultra-Fine-Grained Copper," Acta Metall. Mater., 42 (1994), p. 2467.
25. N. Tsuji et al., "Ultrafine Grained Bulk Steel Produced by Accumulative Roll-Bonding (ARB) Process," Scr. Mater., 40 (7) (1999), pp. 795-800.
26. Y. Saito et al., "Ultrafine Grained Bulk Aluminum Produced by Accumulative Roll-Bonding (ARB) Process," Scr. Mater., 39 (9) (1998), pp. 1221-1227.
27. P.G. Sanders, C.J. Youngdahl, and J.R. Weertman, "The Strength of Nanocrystalline Metals with and without Flaws," Mater. Sci. Eng., A234-236 (1997), pp. 77-82.
28. P.G. Sanders, J.A. Eastman, and J.R. Weertman, "Elastic and Tensile Behavior of Nanocrystalline Copper and Palladium," Acta Mater., 45 (10) (1997), pp. 4019-4025.
29. T.D. Shen et al., "On the Elastic Moduli of Nanocrystalline Fe, Cu, Ni, and Cu-Ni Alloys Prepared by Mechanical Milling/Alloying," J. Mater. Res., 10 (11) (1995), pp. 2892-2896.
30. H. Chang et al., "Synthesis, Processing and Properties of Nanophase TiAl," Scr. Metall. Mater., 25 (1991), pp. 1161-1166.
31. G.W. Nieman, J.R. Weertman, and R.W. Siegel, "Tensile Strength and Creep Properties of Nanocrystalline Palladium," Scr. Metall. Mater., 24 (1990), p. 145.
32. E.Y. Gutmanas, L.I. Trusov, and J. Gotman, "Consolidation, Microstructure and Mechanical Properties of Nanocrystalline Metal Powders," Nanostruct. Mater., 4 (8) (1994), pp. 893-901.
33. M. Jain and T. Christman, "Synthesis, Processing and Deformation of Bulk Nanophase Fe-28Al-2Cr Intermetallic," Acta Metall Mater., 42 (1994), p. 1901.
34. T.R. Smith and K.S. Vecchio, "Synthesis and Mechanical Properties of Nanoscale Mechanically-Milled NiAl," Nanostruct. Mater., 5 (1) (1995), pp. 11-23.
35. L.E. McCandlish, B.H. Kear, and B.K. Kim, "Processing and Properties of Nanostructured WC-Co," Nanostruct. Mater., 1 (1992), pp. 119-124.
36. L.E. McCandlish, B.H. Kear, and B.K. Kim, "Chemical Processing of Nanophase WC-Co Composite Powders," Mater. Sci. Tech., 6 (1990), pp. 953-957.
37. A.E. Berkowitz and J.L. Walter, "Spark Erosion: A Method for Producing Rapidly Quenched Fine Powder," J. Mater. Res., 2 (2) (1987), pp. 277-288.
38. C.R. Aita, C.M. Scanlan, and M. Gajdardziska-Josifovska, "Sputter Deposited Zirconia-Alumina Nanolaminate Coatings," JOM, 46 (10) (1994), pp. 40-42.
39. Y. Champion and J. Bigot, "Characterization of Nanocrystalline Copper Powders Prepared by Melting in a Cryogenic Liquid," Mater. Sci. Eng., A217-218 (1996), pp. 58-63.
40. W. Chang et al., "Chemical Vapor Condensation of Nanostructured Ceramic Powders" Nanostruct. Mater., 4 (3) (1994), pp. 345-351.
41. F.A. Lowenheim, Electroplating (New York: McGraw-Hill Book Co., 1978).
42. U. Erb and A.M. El-Sherik, U.S. patent 5,352,266 (1994).
43. D.L. Grimmett, M. Schwartz, and K. Nobe, "Pulsed Electrodeposition of Iron-Nickel Alloys," J. Electrochem. Soc., 137 (11) (1990), pp. 3414-3418.
44. D.L. Grimmett, M. Schwartz, and K. Nobe, "A Comparison of DC and Pulsed Fe-Ni Alloy Deposits," J. Electrochem. Soc., 140 (4) (1993), pp. 973-978.
45. A. Robertson, U. Erb, and G. Palumbo, "Practical Applications for Electrodeposited Nanocrystalline Materials," Nanostruct. Mater., 12 (1-4) (1999), pp. 1035-1040.
46. F.E. Luborsky, ed., Amorphous Metallic Alloys (London: Butterworth, 1983).
47. 13 Alloys," Scr. Metall. Mater., 28 (1993), pp. 59-64.
48. 67′" Mater. Sci. Eng., A150 (1992), pp. 101-112.
49. 2 Studied by HRTEM," Mater. Sci. Eng., A133 (1991), pp. 346-352.
50. K. Lu, J.T. Wang, and W.D. Wei, "A New Method for Synthesizing Nanocrystalline Alloys," J. Appl. Phys., 69 (1) (1991), pp. 522-524.
51. J. Eckert et al., "Nanostructured Materials in Multicomponent Alloy Systems," Mater. Sci. Eng. (in press).
52. R.W. Siegel, "Nanophase Materials Assembled from Atomic Clusters," MRS Bull., 5 (10) (1990), pp. 60-67.
53. R.W. Siegel and J.A. Eastman, "Synthesis, Characterization and Properties of Nanophase Ceramics," Mat. Res. Soc. Symp. Proc., 132 (1989), pp. 3-14.
54. H. Chang, C.J. Altstetter, and R.S. Averback, "Characteristics of Nanophase TiAl Produced by Inert Gas Condensation," J. Mater. Res., 7 (11) (1992), pp. 2962-2970.
55. G.B. Schaffer and P.C. McCormick, "Displacement Reactions during Mechanical Alloying," Metall. Trans., 21A (1990), pp. 2789-2794.
56. R.M. Davis, B. McDermott, and C.C. Koch, "Mechanical Alloying of Brittle Materials," Metall. Trans., 19A (1988), pp. 2867-2874.
57. C.C. Koch, "The Synthesis and Structure of Nanocrystalline Materials Produced by Mechanical Attrition: A Review," Nanostruct. Mater., 2 (1993), pp. 109-129.
58. H.J. Fecht et al., "Nanocrystalline Metals Prepared by High-Energy Ball Milling," Metall. Trans., 21A (1990), pp. 2333-2337.
59. C.C. Koch, "Processing of Nanophase Materials by High Energy Ball Milling," Nanophases and Nanocrystalline Structures, ed. R.D. Shull and J.M. Sanchez (Warrendale, PA: TMS, 1994), pp. 19-31.
60. G.B. Schaffer and P.G. McCormick, "Anomalous Combustion Effects during Mechanical Alloying," Metall. Trans., 22A (1991), pp. 3019-3024.
61. G.B. Schaffer and P.G. McCormick, "On the Kinetics of Mechanical Alloying," Metall. Trans., 23A (1992), pp. 1285-1290.
62. Z.-G. Yang and L. Shaw, "Synthesis of Nanocrystalline SiC at Ambient Temperature through High Energy Reaction Milling," Nanostruct. Mater., 7 (8) (1996), pp. 873-886.
63. R.-M. Ren, Z.-G. Yang, and L. Shaw, "Synthesis of Nanostructured TiC via Carbothermic Reduction Enhanced by Mechanical Activation," Scripta Mater., 38 (5) (1998), pp. 735-741.
64. R. Ren, Z. Yang, and L. Shaw, "A Novel Process for Synthesizing Nanostructured Carbides: Mechanically Activated Synthesis," Ceram. Eng. Sci. Proc., 19 (4) (1998), pp. 461-468.
65. L. Shaw, R.-M. Ren, and Z.-G. Yang, "Sinterable Carbides From Oxides Using High Energy Milling Control Method," U.S. patent pending.
66. A. Chatterjee and D. Chakravorty, "Electrical Conductivity of Sol-Gel Derived Metal Nanoparticles," J. Mater. Sci., 27 (1992), pp. 4115-4119.
67. D.P. Yamato, A.L. Landis, and T.S. Kuan, "Fabrication of Ferromagnetic Composite Materials via Sol-Gel Processing," Mater. Res. Soc. Symp. Proc. 132 (Pittsburgh, PA: MRS, 1989), pp. 73-78.
68. K.E. Gonsalves et al., "Preparation and Characterization of Nanophase Iron and Ferrous Alloys," Nanotechnology: Molecularly Designed Materials, ACS Symp. Series, Vol. 622, ed. G.-M. Chow and K.E. Gonsalves (Washington, D.C.: American Chemical Society, 1996), pp. 220-236.
69. G.-M. Chow, M.A. Markowitz, and A. Singh, "Synthesizing Submicrometer and Nanoscale Particles via Self-Assembled Molecular Membranes," JOM, 45 (1993), pp. 62-65.
70. M.P. Pileni, "Reverse Micelles as Microreactors," J. Phys. Chem., 97 (1993), pp. 6961-6973.
71. T. Hirai, H. Sato, and I. Komasawa, "Mechanism of Formation of CdS and ZnS Ultrafine Particles in Reverse Micelles," Ind. Eng. Chem. Res., 33 (1994), pp. 3262-3266.
72. I. Lisiecki and M.P. Pileni, "Synthesis of Copper Metallic Clusters Using Reverse Micelles as Microreactors," J. Am. Chem. Soc., 115 (1993), pp. 3887-3896.
73. I. Lisiecki, F. Billoudet, and M.P. Pileni, "Control of the Shape and the Size of Copper Metallic Particles," J. Phys. Chem., 100 (1996), pp. 4160-4166.
74. S.E. Friberg and Z. Ma, "Hydrolysis of Tetraethoxysilane in a Liquid Crystal, in a Microemulsion and in a Solution," J. Non-Crystal. Solids, 147&148 (1992), pp. 30-35.
75. J.H. Fendler, "Atomic and Molecular Clusters in Membrane Mimetic Chemistry," Chem. Rev., 87 (1987), pp. 877-899.
76. T. Ungar et al., "Particle-Size, Size Distribution and Dislocations in Nanocrystalline Tungsten-Carbide," Nanostruct. Mater., 11 (1) (1999), pp. 103-113.
77. J. Hojo et al., "Multiphase Composites of Silicon Carbide Obtained from Composite Particles," Key Engineering Materials, 161-163 (1999), pp. 465-468.
78. D.G. Morris, "Bonding Processes during the Dynamic Compaction of Metallic Powders," Mater. Sci. Eng., 57 (1983), p. 187.
79. C.F. Cline and R.W. Hopper, "Explosive Fabrication of Rapidly Quenched Materials," Scr. Metall., 11(1977), p. 1137.
80. S.H. Risbud and C.-H. Shan, "Fast Consolidation of Ceramic Powders," Mater. Sci. Eng., A204 (1995), pp. 146-151.
81. S.H. Yoo et al., "Consolidation and High Strain Rate Mechanical Behavior of Nanocrystalline Tantalum Powder," Nanostruct. Mater., 12 (1-4) (1999), pp. 23-28.
82. B. Chelluri and J.P. Barber, "Full-Density, Net-Shape Powder Consolidation using Dynamic Magnetic Pulse Pressures," JOM, 51 (7) (1999), pp. 36-37.
83. 2′" Acta Mater., 45 (10) (1997), pp. 4027-4040.
84. E.Y. Gutmanas and A. Rabinkin, "Cold Sintering under High Pressure," Scripta Metall., 13 (1979), pp. 11-15.
85. C. Herring, "Effect of Change of Scale on Sintering Phenomena," J. Appl. Phys., 21 (1950), pp. 301 -303.
86. A. Pechenik, G.J. Piermarini, and S.C. Danforth, "Fabrication of Transparent Silicon Nitride from Nanosize Particles," J. Am. Ceram. Soc., 75 (12) (1992), pp. 3283-3288.
87. 2 and Its Relation to Vickers Hardness and Fracture Toughness," Scripta Metall. Mater., 24 (1990), pp. 2401-2406.
88. F.H. Froes et al., "Nanostructure Processing for Titanium-Based Materials," JOM, 44 (5) (1992), pp. 26-29.
89. F.F. Lange, "Sinterability of Agglomerated Powders," J. Am. Ceram. Soc., 67 (2) (1984), pp. 83-89.
90. H. Kamiya et al., "Densification of Alkoxide-Derived Fine Silica Powder Compact by Ultra-High-Pressure Cold Isostatic Pressing," J. Am. Ceram. Soc., 76 (1) (1993), pp. 54-64.