Developments in PVD tribological coatings

Progress in Heat Treatment and Surface Engineering

Volumn , Issue , 2000, Pages 235-246

  Matthews, Allan ^a   Leyland, Adrian ^a  

^a UNIVERSITY OF HULL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTIC MODULI; HARDNESS; PHYSICAL VAPOR DEPOSITION; RUBBER; WEAR RESISTANCE;

MULTI-LAYERED COATINGS; NANO-COMPOSITE COATINGS; SURFACE COATING; TRIBOLOGICAL COATINGS;

COATINGS;

EID: 0141484659     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (78)

1. Hertz, H., "On the Contact of Elastic Solids" (in German), J. Reine und Angewandte Mathematik, 92, 156-171, 1882 English translation: Miscellaneous Papers by H. Hertz, Eds. Jones and Schott, London, MacMillan, 90, 243, 1896.
2. Tabor, D., "The Hardness of Metals", Oxford University Press, London, 1951.
3. Oberle, T. L., "Properties Influencing Wear of Metals", Journal of Metals, 3, 438-439, 1951.
4. Greenwood, J. A. and Williamson, J. B. P., "Contact of Nominally Flat Rough Surfaces", Proc. Roy. Soc. Lond., A295, 300-319, 1966.
5. Tabor, D., "Friction, Lubrication and Wear", in Matijevic, E. (Ed.), Surface and Colloid Science, Vol. 5, John Wiley, 245-312, 1972.
6. Halling, J., "The Tribology of Surface Coatings, Particularly Ceramics", Proc. Instn. Mech. Engrs., 200, 31-40, 1986.
7. Leyland, A. and Matthews, A., "On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating Approach to Optimised Tribological Behaviour", submitted to Wear.
8. Veprek, S., "The Search for Novel, Superhard Materials", J. Vac. Sci. Technol., A17 (5), 2401-2420, 1999.
9. Hertzberg, R. W., "Deformation and Fracture Mechanics of Engineering Materials", 3rd Ed., Wiley, New York, 1989.
10. Holmberg, K. and Matthews, A., "Coatings Tribology: Properties, Techniques and Applications in Surface Engineering", Elsevier Tribology, Series, 28, Elsevier, Amsterdam, 1994.
11. Holmberg, K. and Matthews, A., "Coatings Tribology: A Concept, Critical Aspects and Future Directions", Thin Solid Films, 253, 173-178, 1994.
12. Holmberg, K., Matthews, A. and Ronkainen, H., "Coatings Tribology - Contact Mechanisms and Surface Design", Tribology International, 31, 107-120, 1998.
13. Matthews, A., Leyland, A., Holmberg, K. and Ronkainen, H., "Design Aspects for Advanced Tribological Coatings", Surf. Coat. Technol., 100-101, 1-6, 1998.
14. Berthier, Y., Godet, M. and Brendle, M., "Velocity Accommodation in Friction", Tribology Trans. 32, 460-496, 1989.
15. Berthier, Y., Vincent, L. and Godet, M., "Velocity Accommodation in Fretting", Wear, 125, 25-38, 1988.
16. Godet, M., Berthier, Y., Vincent, L. and Flamand, L., "Hard Coatings for Tribological Applications: A Pluridisciplinary Approach", Surf. Coat. Technol., 45, 1-8, 1991.
17. Ramalingham, S. and Lanshi Zheng, "Film-Substrate Interface Stresses and Their Role in the Tribological Performance of Surface Coatings", Tribology Int., 28, 145-161, 1995.
18. Rebholz, C., Ziegele, H., Leyland, A. and Matthews, A., "Structure, Mechanical and Tribological Properties of Nitrogen-Containing Chromium Coatings Prepared by Reactive Magnetron Sputtering", Surf. Coat. Technol., 115, 222-229, 1999.
19. Rebholz, C., Schneider, J. M., Leyland, A. and Matthews, A., "Wear Behaviour of Carbon-Containing Tungsten Coatings Prepared by Reactive Magnetron Sputtering", Surf. Coat. Technol., 112, 85-90, 1999.
20. Neuville, S. and Matthews, A., "Hard Carbon Coatings: The Way Forward", MRS Bulletin, 22, 22-26, 1997.
21. Koehler, J. S., "Attempt to Design a Strong Solid", Phys. Rev., B2, 547-551, 1970.
22. Lohoczy, S. L., "Strength Enhancement in Thin-Layered Al-Cn Laminates", J. Appl. Phys., 49, 5479, 1978.
23. Lohoczy, S. L., "Retardation of Dislocation Generation and Motion in Thin-Layered Metal Laminates", Phys. Rev. Lett., 41, 1814, 1978.
24. Barnett, S. A., "Deposition and Mechanical Properties of Superlattice Thin Films". In Physics of Thin Films, Eds: Francombe, M. and Vossen, J. A., Vol. 17, Academic Press, 1993.
25. Helmersson, U., Todorova, S., Barnett, S. A., and Sundgren, J-E, "Growth of Single-Crystal TiN/VN Strained-Layer Superlattices with Extremely High Mechanical Hardness", J. Appl. Phys. 62 (2), 481, 1987.
26. y Vacuum Deposited Laminates", Thin Solid Films, 54, 197-205, 1978.
27. Springer, R. W. and Harford, C. D., "Characterisation of Aluminium-Aluminium Nitride Coatings Sputter-Deposited Using the Pulsed Gas Process", J. Vac. Sci. Technol., 20, 462-464, 1982.
28. Holleck, H., "Material Selection for Hard Coatings", J. Vac. Sci. Technol., A4, 2661-2669, 1986.
29. Holleck, H. and Schier, V., "Multilayer PVD Coatings for Wear Protection", Surf. Coat. Technol., 76/77, 328-336, 1995.
30. Holleck, H., Lahres, M. and Woll, P., "Multilayer Coatings - Influence of Fabrication Parameters on Constitution and Properties", Surf. Coat. Technol., 41, 179-190, 1990.
31. Dimigen, H. and Klages, C-P, "Microstructure and Wear Behaviour of Metal-Containing Diamond-Like Coatings", Surf. Coat. Technol., 49, 543, 1991.
32. Bewilogua, K. and Dimigen, H., "Preparation of W-C-H Coatings by Reactive Magnetron Sputtering", Surf. Coat. Technol., 61, 144, 1993.
33. Chu, X., Wong, M. S., Sproul, W. D., Rohde, S. L. and Barnett, S. A., "Deposition and Properties of Polycrystalline TiN/NbN Superlattice Coatings", J. Vac. Sci. Technol., A10(4), 1604, 1992.
34. Sproul, W. D., "New Routes in the Preparation of Mechanically Hard Films", Science, 273, 889, 1996.
35. Donohue, L. A., Cawley, J., Lewis, D. B., Brooks, J. S. and Munz, W. D., "Investigation of Superlattice Coatings Deposited by a Combined Steered-Arc Evaporation and Unbalanced Magnetron Sputtering Technique", Surf. Coat. Technol., 76, 149, 1995.
36. Donohue, L. A., Munz, W. D., Lewis, D. B., Cawley, J., Hurkmans, T., Trinh, T., Petrov, I., and Greene, J. E., "Large-Scale Fabrication of Hard Superlattice Thin Films by Combined Steered-Arc Evaporation and Unbalanced Magnetron Sputtering", Surf. Coat. Technol., 93, 69-87, 1997.
37. Leyland, A and Matthews, A, "Thick Ti/TiN Multilayered Coatings for Abrasive and Erosive Wear Resistance", Surf. Coat. Technol., 70, 19-25, 1994.
38. Matthews, A. and Eskildsen, S. S., "Engineering Applications for Diamond-Like Carbon", Diamond and Related Materials, 3, 902-911, 1994.
39. Matthews, A., "Modulated Composition Composites Produced by Vapour Deposition", UK Patent GB 2242442 B, 1994.
40. Bantle, R. and Matthews, A., "Investigation into the Impact Wear Behaviour of Ceramic Coatings", Surf. Coat. Technol., 74/75, 875-868.
41. y and Ti-DLC Composite Coatings", Wear, 185, 151-157, 1995.
42. Voevodin, A. A., Schneider, J. M., Rebholz, C., and Matthews, A., "Multilayer Composite Ceramic-Metal-DLC Coatings for Sliding Wear Applications", Tribology Int., 29(7), 559-570, 1996.
43. Veprek, S., "Conventional and New Approaches Towards the Design of Novel Superhard Materials", Surf. Coat. Technol., 97, 15-22, 1997.
44. Musil, J., "Hard and Superhard Nanocomposite Coatings", Surf. Coat. Technol., 125, 322-330, 2000.
45. Musil, J., Zeman, P., Hruby, H. and Mayrhofer, P. H., "ZrN/Cu Nanocomposite Film - A Novel Superhard Material", Surf. Coat. Technol., 120/121, 179-183, 1999.
46. Musil, J., Leipner, I. and Kolega, M., "Nanocrystalline and Nanocomposite CrCu an CrCu-N Films Prepared by Magnetron Sputtering", Surf. Coat. Technol., 115, 32-37, 1999.
47. 2", Vacuum, 50, 313-318, 1998.
48. Mitterer, C., Mayrhofer, P. H., Beschliesser, M., Losbichler, P., Warbichler, P., Hofer, F., Gibson, P. N., Gissler, W., Hruby, H., Musil, J. and Vlcek, J., "Microstructure and Properties of Nanocomposite Ti-B-N and Ti-B-C Coatings", Surf. Coat. Technol., 120/121, 405-411, 1999.
49. Gissler, W., "Structure and Properties of Ti-B-N Coatings", Surf. Coat. Technol., 68/69, 556-563, 1994.
50. Musil, J. and Regent, F., "Formation of Nanocrystalline NiCr-N Films by Reactive dc Magnetron Sputtering", J. Vac. Sci. Technol., A16(6), 3301-3304, 1998.
51. Misina, M., Musil, J. and Kadlec, S., "Composite TiN-Ni Thin Films Deposited by Reactive Magnetron Sputter Ion Plating", Surf. Coat. Technol., 110, 168-172, 1998.
52. Veprek, S., Nesladek, P., Niederhofer, A, Glatz, F., Jilek, M. and Sima, M., "Recent progress in the Superhard Nanocrystalline Composites: Towards Their Industrialisation and Understanding of the Origin of the Superhardness", Surf. Coat. Technol., 108/109, 138-147, 1998.
53. Ronkainen, H., Nieminen, I., Holmberg, K., Leyland, A., Fancey, K. S., Matthews, A., Matthes, and Broszeit, E., "Evaluation of Some New Titanium-Based Ceramic Coatings in Tribological Model Wear and Metal Cutting Tests", Mater. Sci. Eng. A, 140, 602-608, 1991.
54. Rebholz, C., Leyland, A., Schneider, J. M., Voevodin, A. A. and Mattehws, A., "Structure, Hardness and Mechanical Properties of Magnetron-Sputtered Titanium-Aluminium Boride Films, Surf. Coat. Technol., 120/121, 412-417, 1999.
55. Rebholz, C., Ziegele, H., Leyland, A. and Matthews, A., "Structure, Mechanical and Tribological Properties of Ti-B-N and Ti-Al-B-N Thin Films Produced by Electron Beam Evaporation", J. Vac. Sci. Technol. A, 16/5, 2851-2857, 1998.
56. Rebholz, C., Schneider, J. M., Voevodin, A. A., Steinebrunner, J., Charitidis, C., Logothetidis, S., Leyland, A. and Matthews, A., "Structure, Mechanical and Tribological Properties of Sputtered TiAlBN Thin Films", Surf. Coat. Technol., 113. 126-133. 1999.
57. Rebholz, C., Leyland, A. and Matthews, A., "Deposition and Characterisation of TiAlBN Coatings Produced by Direct Electron-Beam Evaporation of Ti and Ti-Al-B-N Material From a Twin Crucible Source", Thin Solid Films, 343-344, 242-245, 1999.
58. Rebholz, C., Leyland, A., Larour, P., Charitidis, C., Logothetidis, S., and Matthews, A., "The Effect of Boron Additions on the Tribological Behaviour of TiN Coatings Produced by Electron-Beam Evaporative PVD", Surf. Coat. Technol., 116-119, 648-653, 1999.
59. Rebholz, C., Leyland, A., Schneider, J. M., Schultrich, B., Charitidis, C, Logothetidis, S. and Matthews, A., "Correlation of Hardness, Elastic Modulus and Density Measurements by Nanoindentation and Ultrasonic Surface Acoustic Wave Techniques on Magnetron Sputtered TiAlBN Coatings", accepted for publication, Thin Solid Films.
60. Zabinski, J. S., Prasad, S. V. and McDevitt, N. T., "Advanced Solid Lubricant Coatings for Aerospace Systems". Proceedings of the AGARD Conference on Tribology of Space Systems, Sesimbra, Portugal, 6-7 May 1996, AGARD, CP-589, 31.3.12, 1996.
61. Voevodin, A. A., O'Neill, J. P. and Zabinski, J. S., "Nanocomposite Tribological Coatings for Aerospace Applications", Surf. Coat. Technol., 116/119, 36-45, 1999.
62. 2 Films", Tribology Transactions, 38, 894-904, 1995.
63. 2 Coatings in Dry Sliding Contact with Steel and Ceramics", Wear, 195, 7-20, 1996.
64. 2", Thin Solid Films, 84, 257-266, 1981.
65. 2x Coatings by a Combined Arc Evaporation and Magnetron Sputtering Process", Surf. Coat. Technol., 120/121, 453-457, 1999.
66. 2 Coatings Produced by dc Magnetron Co-Deposition", Surf. Coat. Technol., 108/109, 345-351, 1998.
67. 2 Films Grown by Pulsed Laser Deposition", Thin Solid Films, 214, 156-163.
68. Zabinski, J. S. and Donley, M. S., "Lubricant Coatings", US Patent 5, 282, 985, 1994.
69. Leyland, A., Lewis, D. B., Stevenson, P. R. and Matthews, A., "Low Temperature Plasma Diffusion Treatment of Stainless Steels for Improved Wear Resistance", Surf. Coat. Technol., 62, 608-617, 1993.
70. Matthews, A., Leyland, A., Dorn, B., Stevenson, P. R., Bin-Sudin, M., Rebholz, C., Voevodin, A. and Schneider, J., "Plasma-Based Surface Engineering Processes for Wear and Corrosion Protection", J. Vac. Sci. Technol., A13(3), 1202-1207, 1995.
71. Matthews, A. and Leyland, A., "Hybrid Techniques in Surface Engineering", Surf. Coat. Technol., 71, 88-92, 1995.
72. Bin-Sudin, M., Leyland, A., James, A. S., Matthews, A., Housden, J. and Garside, B., "Substrate Surface Finish Effects in Duplex Coatings of PAPVD TiN and CrN with Electroless Nickel-Phosphorus Interlayers", Surf. Coat. Technol., 81, 215-224, 1996.
73. Leyland, A., Bin-Sudin, M., James, A. S., Kalantary, M. R., Wells, P. B. and Matthews, A., "TiN and CrN PVD Coatings on Electroless Nickel Coated Steel Substrates", Surf. Coat. Technol., 60, 474-479, 1993.
74. Yerokhin, A. L., Nie, X., Leyland, A., Matthews, A. and Dowey, S. J., "Plasma Electrolysis for Surface Engineering", Surf. Coat. Technol., 122, 73-93, 1999.
75. Nie, X., Leyland, A., Song, H. W., Yerokhin, A. L., Dowey, S. J. and Matthews, A., "Thickness Effects on the Mechanical Properties of Micro-Arc Discharge Oxide Coatings on Aluminium Alloys", Surf. Coat. Technol., 116/119, 1055 1060, 1999.
76. 2 Coatings Using a Duplex Process of Unbalanced Magnetron Sputtering and Micro-Arc Oxidation". Proceedings of the International Conference on Metallurgical Coatings and Thin Films, San Diego, April, 2000.
77. Yerokhin, A. L., Nie, X., Leyland, A. and Matthews, A., "Characterisation of Oxide Films Produced by Plasma Electrolytic Oxidation of Ti-6Al-4V Alloy". To be published in Surf. Coat. Technol.
78. 3) on Aluminium (BS A16082) for Tribological Applications". Proceedings of the Asian-European Plasma Surface Engineering Conference, Beijing, China, September 1999. To be published in Surf. Coat. Technol.