Wear by plastic ratchetting

Wear

Volumn 212, Issue 1, 1997, Pages 119-130

  Kapoor, A ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Contact stress; Plastic ratchetting; Sliding; Wear debris

Indexed keywords

DELAMINATION; FRACTURE; PLASTIC DEFORMATION; STRESS CONCENTRATION; SURFACE ROUGHNESS; FRICTION; PLATE METAL; ROLLING; SHEAR STRESS; SURFACE PHENOMENA; TRIBOLOGY;

CONTACT STRESS; PLASTIC RATCHETTING; WEAR DEBRIS; DELAMINATION WEAR DEBRIS; SLIDING CONTACTS; THIN PLATELETS;

WEAR OF MATERIALS;

EID: 0031260761     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(97)00083-5     Document Type: Article

References (43)

1. A.A. Reda, R. Bowen, V.C. Westcott, Characteristics of particles generated at the interface between sliding steel surfaces, Wear, 34 (1975) 261.
2. H.R. Shetty, T.H. Kosel, N.F. Fiore, A case study of abrasive wear mechanisms using diamond and alumina scratch tests, Wear, 80 (1982) 347.
3. S.M. Kuo, D.A. Rigney, Sliding behaviour of aluminium, Mater. Sci. Eng., A157 (1992) 131.
4. J.M. Martin, J.L. Mansot, I. Bebezier, H. Dexpert, The nature and origin of wear particles from boundary lubrication with a zinc dialkyldithiophosphate, Wear, 93 (1984) 117.
5. A. Kjer, A lamination wear mechanism based on plastic waves, Proc. Int. Conf. on Wear of Materials, 1987, ASME, New York, 1987, pp. 191-198.
6. T. Akagaki, K. Kato, Plastic flow process of surface layers in flow wear under boundary lubricated conditions, Wear, 117 (1987) 179.
7. A. Kapoor, K.L. Johnson, Plastic ratchetting as a mechanism of - metallic wear, Proc. R. Soc. London, Ser. A, 445 (1994) 367-381.
8. A.C.F. Cocks, A.R.S. Ponter, The plastic behaviour of components subjected to constant primary stresses and cyclic secondary stresses, J. Strain Anal., 20 (7) (1985).
9. K.L. Johnson, Contact Mechanics, Cambridge University Press, 1985.
10. A. Kapoor, K.L. Johnson, Steady state topography of surfaces in repeated boundary lubricated sliding. In D. Dowson, C.M. Taylor, T.H.C. Childs, M. Godet, G. Dalmaz (eds.), Thin Films in Tribology -Proc. 19th Leeds-Lyon Symp., Institute of Tribology, Leeds, 8-11 September 1992, Elsevier, 1992, pp. 81-90.
11. A. Kapoor, K.L. Johnson, Effect of changes in contact geometry on shakedown of surfaces in rolling/sliding contact, Int. J. Mech. Sci., 34 (3) (1992) 223-239.
12. A. Kapoor, A.C.F. Cocks, Wear through the plastic interaction of cylindrical asperities in sliding, Int. J. Mech. Sci., 36 (11) (1994) 1045-1059.
13. A. Kapoor, J.A. Williams, K.L. Johnson, The steady state sliding of rough surfaces, Wear, 175 (1994) 81-92.
14. D.J. Whitehouse, J.F. Archard, The properties of random surfaces of significance in their contact, Proc. R. Soc. London, Ser. A, 316 (1970) 97-121.
15. J.A. Greenwood, J.B.P. Williamson, Contact of nominally flat surfaces, Proc. R. Soc. London, Ser. A, 295 (1966) 300-319.
16. A. Kapoor, K.L. Johnson, J.A. Williams, A model for the mild ratchetting wear of metals, Wear, 200 (1996) 38-44.
17. A.F. Bower, K.L. Johnson, The influence of strain hardening on cumulative plastic deformation in rolling and sliding line contact, J. Mech. Phys. Solids, 37 (1989) 471-493.
18. E. Rabinowicz, Proc. Conf. on Engineering Materials for Advanced Friction and Wear Applications, ASME, Gaithersburg, MD, 1988, p. 202.
19. R.A. Mayville, M.S. Thesis, Lawrence Berkeley Laboratories, University of California, CA 1978 (Rep. LBL 7333).
20. P.S. Follansbee, G.B. Sinclair, J.C. Williams, Proc. Int. Conf. on Wear of Materials, 1981, American Society of Mechanical Engineers, New York, 1981, pp. 577-582.
21. G.B. Rickerby, N.H. Macmillan, Wear, 60 (1980) 369-382.
22. R. Bellman, Jr., A. Levy, Wear, 70 (1981) 1-27.
23. R. Brown, E.J. Jun, J.W. Edington, Proc. Int. Conf. on Wear of Materials, 1981, American Society of Mechanical Engineers, New York, 1981, pp. 583-591.
24. R. Brown, E.J, Jun, J.W. Edington, Wear, 70 (1981) 347-363.
25. G. Carter, M.J. Nobes, K.I. Arshak, Wear, 65 (1980) 151-174.
26. D.G. Rickerby, N.H. Macmillan, Wear, 79 (1982) 171-190.
27. A.K. Cousens, I.M. Hutchings, Wear, 88 (1983) 335-348.
28. J.A. Zu, Ph.D. Thesis, Cambridge University, 1990.
29. A. Kapoor, K.L. Johnson, Plastic ratchetting as a mechanism of erosive wear, Wear, 168-167 (1995) 86-91.
30. N.P. Suh, An overview of the delamination theory of wear, Wear, 44 (1977) 1-16.
31. I.V. Kragelski, M.N. Dobychin, V.S. Kombalov, Friction and Wear: Calculation Methods, Pergamon, 1982.
32. B.S. Hockenhull, E.M. Kopalinsky, P.L.B. Oxley, An investigation of the role of low cycle fatigue in producing surface damage in sliding metallic friction, Wear, 148 (1991) 135-146.
33. J.M. Challen, P.L.B. Oxley, B.S. Hockenhull, Prediction of Archard's wear coefficient assuming a low cycle fatigue mechanism, Wear, 111 (1986) 275-288.
34. P. Lacey, A.A. Torrance, The calculation of wear coefficients for plastic contacts, Wear, 145 (1991) 367-383.
35. A. Kapoor, A re-evaluation of the life to rupture of ductile metals by cyclic plastic strain, Fatigue Fract. Eng. Mater. Struct., 17 (2) (1994) 201-219.
36. F. Kazi, A. Kapoor, The role of rupture in wear of materials, submitted to ASME J. Tribol., 1996.
37. A. Kapoor, Mechanics of failure in a hardening and wearing surface. In The Mechanics and Materials Science of Contact: Issues and Opportunities, Workshop held at Vanderbilt University, Nashville, TN, 18-20 July 1994, Institute of Mechanics and Materials, University of California, San Diego, LaJolla, CA, 1994, Report No. 94-17.
38. J.H. Beynon, A. Kapoor, The interaction of wear and rolling contact fatigue. In R.A. Smith (ed.), Reliability Assessment of Cyclic Loaded Engineering Structures, 1-26. Kluwer Academic Publishers, 1997.
39. W.R. Tyfour, J.H. Beynon, A. Kapoor, The steady state wear behaviour of pearlitic rail steel under dry rolling-sliding contact conditions, Wear, 180 (1995) 79-89.
40. W.R. Tyfour, J.H. Beynon, The effect of rolling direction reversal on the wear rate and wear mechanism of pearlitic rail steel, Tribol. Int., 27 (1994) 401-412.
41. M. Brandes, Mechanical properties of materials under hydrostatic pressure. In H.L1.D. Pugh (ed.), Mechanical Behaviour of Materials under Pressure, Elsevier, 1970, pp. 236-298.
42. E. Felder, 1990, Metals and alloys under high pressure. Plenary invited lecture to XVIII EHPRG Conf., Bordeaux.
43. Y. Jiang, H. Sehitogiu, Rolling contact stress analysis with the application of a new plasticity model, Wear, 191 (1996) 35-44.