Surface morphology and wear mechanisms of four clinically relevant biomaterials after hip simulator testing

Journal of Biomedical Materials Research

Volumn 52, Issue 3, 2000, Pages 447-459

  Kurtz, S M ^a   Muhlstein, C L ^a   Edidin, A A ^b  

^a EXPONENT INC   (United States)

^b STRYKER ORTHOPAEDICS   (United States)

Author keywords

Elastic modulus; HDPE; High density polyethylene; Hip simulator; Mechanical behavior; PA; Polyacetal; Polymers; Polytetrafluoroethylene; PTFE; Small punch test; Total hip replacement; UHMWPE; Ultra high molecular weight polyethylene; Wear

Indexed keywords

DEFORMATION; ELASTIC MODULI; HIGH DENSITY POLYETHYLENES; HIP PROSTHESES; INTERFEROMETRY; JOINTS (ANATOMY); MORPHOLOGY; POLYTETRAFLUOROETHYLENES; SURFACE ROUGHNESS; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS;

ACETABULAR LINERS; HIP SIMULATOR TESTING; SURFACE MORPHOLOGY;

BIOMATERIALS;

ACETAL DERIVATIVE; POLITEF; POLYETHYLENE;

ACETABULUM; ARTICLE; FEMUR HEAD; HIP; INTERFEROMETRY; SIMULATOR; SURFACE PROPERTY;

ACETALS; COATED MATERIALS, BIOCOMPATIBLE; ELASTICITY; HIP PROSTHESIS; HUMAN; INTERFEROMETRY; MATERIALS TESTING; POLYETHYLENE; POLYMERS; POLYTETRAFLUOROETHYLENE; SUPPORT, NON-U.S. GOV'T; SURFACE PROPERTIES; WEIGHT-BEARING;

EID: 0033800071     PISSN: 00219304     EISSN: None     Source Type: Journal    
DOI: 10.1002/1097-4636(20001205)52:3<447::AID-JBM2>3.0.CO;2-E     Document Type: Article

References (33)

1. Total human joint prosthesis: A laboratory study of friction and wear
2. Wear assessment
3. Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements
4. Predicting the clinical wear performance of orthopaedic bearing surfaces
5. The impact of lubricant protein concentration on the outcome of hip joint simulator testing
6. Charnley wear model for validation of hip simulators: Ball diameter versus polytetrafluoroethylene and polyethylene wear
7. Water and bovine serum lubrication compared in simulator PTFE/CoCr wear model
8. The influence of mechanical behavior on the wear of four clinically relevant polymeric biomaterials in a hip simulator
9. The optimum size of prosthetic heads in relation to the wear of plastic sockets in total replacement of the hip
10. Tissue reaction to the polytetraflouroethyene
11. Total hip replacement by low-friction arthroplasty
12. Plasticity-induced damage layer is a precursor to wear in radiation-crosslinked UHMWPE acetabular components for total hip replacement
13. Macroscopic and microscopic wear mechanisms in ultra-high molecular weight polyethylene
14. The wear of ultra-high molecular weight polyethylene sliding on metallic and ceramic counterfaces representative of current femoral surfaces in joint replacement
15. The influence of scratches to metallic counterfaces on the wear of ultra-high molecular weight polyethylene
16. A study of the combined effects of shelf ageing following irradiation in air and counterface roughness on the wear of UHMWPE
17. Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups
18. The performance of irradiation-crosslinked UHMWPE cups under abrasive conditions throughout hip simulation testing. Transactions of the 45th Orthopedic Research Society
19. The effect of surface topography of retrieved femoral heads on the wear of UHMWPE sockets
20. The influence of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene sockets in cementless total hip replacement
21. Solid state surface characterization
22. The origin of submicron polyethylene wear debris in total hip arthroplasty
23. Wear of polyethylene acetabular components in total hip arthroplasty: An analysis of one hundred and twenty-eight components retrieved at autopsy or revision operations
24. The importance of multidirectional motion on the wear of polyethylene
25. Orientation softening in the deformation and wear of ultra-high molecular weight polyethylene
26. Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty
27. Effect of molecular weight, calcium stearate, and sterilization methods on the wear of ultra-high molecular weight polyethylene acetabular cups in a hip simulator
28. Low friction principle
29. POM/Metal joint prostheses
30. Wear of the acetabular socket: Comparison of polyacetal and polyethylene
31. Wear of the Christiansen hip prosthesis
32. Delrin as a material for joint prostheses: A review