Influence of mechanical behavior on the wear of 4 clinically relevant polymeric biomaterials in a hip simulator

Journal of Arthroplasty

Volumn 15, Issue 3, 2000, Pages 321-331

  Edidin, Avram A ^a   Kurtz, Steven M ^b  

^a STRYKER ORTHOPAEDICS   (United States)

^b EXPONENT INC   (United States)

Author keywords

Contact stress; Elastic modulus; High density polyethylene (HDPE); Hip simulator; Large deformation mechanical properties; Polyacetal (polyoxymethylene Delrin ); Polyoxymethylene; Polytetrafluoroethylene (PTFE Teflon ); Small punch test; Ultra high molecular weight polyethylene (UHMWPE, GUR 1050, RCH 1000); Wear

Indexed keywords

BIOMATERIAL; POLITEF;

ARTHROPLASTY; ARTICLE; BIOMECHANICS; ELASTICITY; FEMUR HEAD; GAIT; HIP PROSTHESIS; SIMULATOR; STRESS; VOLUMETRY; YOUNG MODULUS;

EID: 0034031695     PISSN: 08835403     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0883-5403(00)90647-8     Document Type: Article

References (41)

1. Duff-Barclay I, Spillman DT: Total human joint prosthesis: a laboratory study of friction and wear. Proc Inst Mech Eng 181:90, 1966-67
2. McKellop H, Clarke I, Markolf K, et al: Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multichannel screening device. J Biomed Mater Res 15:619, 1981
3. McKellop H: Wear of artificial joint materials: II. twelve-channel wear-screening device: correlation of experimental and clinical results. Engineering in Medicine 10:123, 1981
4. Clarke IC, McKellop H: The wear of Delrin 150 compared with polyethylene, polyester, and PTFE. In Hastings GW, Williams DF (eds): Mechanical properties of biomaterials. Wiley, New York, 1980
5. McKellop HA, Campbell P, Park SH, et al: The origin of submicron polyethylene wear debris in total hip arthroplasty. Clin Orthop 311:3, 1995
6. Bragdon CR, O'Connor DO, Lowenstein JD, et al: The importance of multidirectional motion on the wear of polyethylene. Proc Inst Mech Eng 210:157, 1996
7. Jasty M, Goetz DD, Bragdon CR, et al: Wear of polyethylene acetabular components in total hip arthroplasty: an analysis of one hundred and twentyeight components retrieved at autopsy or revision operations. J Bone Joint Surg Am 79:349, 1997
8. Wang A, Sun DC, Yau S-S, et al: Orientation softening in the deformation and wear of ultra-high molecular weight polyethylene. Wear 203-204:230, 1997
9. Good VD, Clarke IC, Anissian L: Water and bovine serum lubrication compared in simulator PTFE/CoCr wear model. J Biomed Mater Res 33:275, 1996
10. Clarke IC, Gustafson A, Jung H, et al: Hip-simulator ranking of polyethylene wear: comparisons between ceramic heads of different sizes. Acta Orthop Scand 67:128, 1996
11. McKellop HA: Wear assessment. In Callaghan JJ, Rosenberg AG, Rubash HE (eds): The adult hip. Lippincott-Raven, Philadelphia, 1998
12. Wang A, Essner A, Polineni VK, et al: Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements. Tribology International 31: 17, 1998
13. Sauer WL, Anthony ME: Predicting the clinical wear performance of orthopaedic bearing surfaces. In Jacobs JJ, Craig TL (eds): Alternative bearing surfaces in total joint replacement. American Society for Testing and Materials, West Conshohoken, PA, 1998
14. McKellop H, Clarke I, Markolf K, et al: High wear rates with Delrin 150 - A clinical hazard? Trans Orthop Res Soc 3:7, 1978
15. Bartel DL, Burstein AH, Toda MD, et al: The effect of conformity and plastic thickness on contact stresses in metal-backed plastic implants. J Biomech Eng 107: 193, 1985
16. Bartel DL, Bicknell VL, Wright TM: The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. J Bone Joint Surg Am 68:1041, 1986
17. Maxian TA, Brown TD, Pedersen DR, et al: Finite element analysis of acetabular wear: validation, and backing and fixation effects. Clin Orthop 344:111, 1997
18. Maxian TA, Brown TD, Pedersen DR, et al: Long-term polyethylene wear rates for total hip arthroplasty determined by adaptive finite element modelling. Presented at the annual Meeting of the 42nd Orthopedic Research Society, Atlanta, GA, February 19-22, 1996
19. Wang A, Stark C, Dumbleton JH: Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint prostheses. Proc Inst Mech Eng 210:141, 1996
20. Wang A, Stark C, Dumbleton JH: Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups. J Biomed Mater Res 29:619, 1995
21. Edidin AA, Pruitt L, Jewett CW, et al: Plasticity-induced damage layer is a precursor to wear in radiation-cross-linked UHMWPE acetabular components for total hip replacement. J Arthroplasty 14: 616, 1999
22. Kurtz SM, Foulds JR, Jewett CW, et al: Validation of a small punch testing technique to characterize the mechanical behavior of ultra-high molecular weight polyethylene. Biomaterials 18:1659, 1997
23. Kurtz SM, Jewett CW, Foulds JR, et al: A miniature-specimen mechanical testing technique scaled to the articulating surface of polyethylene components for total joint arthroplasty. J Biomed Mater Res (Appl Biomater) 48:75, 1999
24. Taylor JR: An introduction to error analysis: the study of uncertainties in physical measurements. University Science Books, Sausalito, CA, 1997
25. Charnley J: Arthroplasty of the hip: a new operation. Lancet 1:1129, 1961
26. Charnley J: Tissue reaction to the polytetrafluoroethyene. Lancet 2:1379, 1963
27. Charnley J: Total prosthetic replacement of the hip. Triangle 8:211, 1968
28. Charnley J, Kamangar A, Longfield MD: The optimum size of prosthetic heads in relation to the wear of plastic sockets in total replacement of the hip. Med Biol Eng 7:31, 1969
29. Charnley J: Total hip replacement by low-friction arthroplasty. Clin Orthop 72:7, 1970
30. Charnley J: Low friction principle. In: Low friction arthroplasty of the hip: theory and practice. Springer-Verlag, Berlin, 1979
31. Charnley J, Halley DK: Rate of wear in total hip replacement. Clin Orthop 112:170, 1975
32. Wang A, Polineni VK, Essner A, et al: The impact of lubricant protein concentration on the outcome of hip joint simulator testing. Presented at the annual Meeting of the Transactions of the 45th Orthopedic Research Society, Anaheim, CA, February 9-1 3, 1999
33. Lue CT, Crugnola A, Orroth SA: Approaching the properties of UHMW-PE by crosslinking low molecular weight HDPE. Presented at ANTEC '84, New Orleans, LA, April-May 1984
34. Galante JO, Rostoker W: Wear in total hip prostheses: an experimental evaluation of candidate biomaterials. Acta Orthop Scand 145(Suppl):6, 1973
35. Christiansen T: A new hip prosthesis with trunnion bearing. Acta Chir Scand 134:43, 1969
36. Christiansen T: A combined endo- and total hip prosthesis with trunion bearing. Acta Chir Scand 140:185, 1974
37. Havelin LI, Gjerdet NR, Lunde OD, et al: Wear of the Christiansen hip prosthesis. Acta Orthop Scand 57: 419, 1986
38. Ohlin A, Persson PG: Failed Christiansen total hip arthroplasty. J Arthroplasty 4:207, 1989
39. Sudmann E, Havelin LI, Lunde OD, et al: The Charnley versus the Christiansen total hip arthroplasty: a comparative clinical study. Acta Orthop Scand 54: 545, 1983
40. Alho A, Soreide O, Bjersand AJ: Mechanical factors in loosening of Christiansen and Charnley arthroplasties. Acta Orthop Scand 55:261, 1984
41. Alho A: Failure of the Christiansen hip: survival analysis of 265 cases. Acta Orthop Scand 61:7, 1990