Thermal plasmas

IEEE Transactions on Plasma Science

Volumn 25, Issue 6, 1997, Pages 1258-1280

  Fauchais, Pierre ^a   Vardelle, Armelle ^a  

^a UNIVERSITY OF LIMOGES   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ABSORPTION SPECTROSCOPY; ANODES; CATHODES; MATHEMATICAL MODELS; MAXWELL EQUATIONS; PLASMA ARC CUTTING; PLASMA FLOW; PLASMA SPRAYING; PLASMA TORCHES; PLASMA WELDING; THERMODYNAMIC PROPERTIES; TRANSPORT PROPERTIES;

THERMAL PLASMAS;

PLASMAS;

EID: 0031339389     PISSN: 00933813     EISSN: None     Source Type: Journal    
DOI: 10.1109/27.650901     Document Type: Article

References (274)

1. B. Gross, B. Gricz, and F. Miklossy, Plasma Technology. London, U.K.: Iliffe, 1968, p. 320.
2. M.F. Jhukov et al., Electric Arc Gas Heaters (Plasma Torches. Moscow, USSR: Nauka, 1973, p. 232.
3. H.U. Eckert, "The induction arc: A state of the art review," High Temp., vol. 6, pp. 99-134, 1974.
4. M.F. Jhukov et al. Applied Dynamics of Thermal Plasmas. Siberia, USSR: Nauka, 1975, p. 269.
5. S.L.M. Hamblyn, Minerals Sci. Eng., vol. 9, no. 3, pp. 151-175, 1977.
6. E. Pfender, "Electric arcs and arc gas heaters," in Gaseous Electronics, N. Hirsh and H. Oskam, Eds. New York: Academic, 1978, vol. 1.
7. M.I. Boulos, Pure Appl. Chem., vol. 57, pp. 1321-1352, 1985.
8. J. Feinman, Ed., "Plasma technology in metallurgical processing," in Iron and Steel Soc. of AIME, 1987, p. 500.
9. M. Orfeuil, Ed., Arc Plasma Processes, A Maturing Technology in Industry. Int. Union Electroheat, 1988, p. 135.
10. S.L. Camatcho, Pure Appl. Chem., vol. 60, no. 5, pp. 619-632, 1988.
11. G. Laroche and M. Orfeuil, Eds., Plasmas in Industry. Avon, France: Doppée Collection, 1989, p. 699.
12. P. Fauchais, High Temp. Chem. Proc., vol. 1, no. 1, pp. 1-43, 1992.
13. M.I. Boulos, High Temp. Chem. Proc., vol. 1, no. 4, pp. 401-412, 1992.
14. P. Fauchais and M. Vardelle, Pure Appl. Chem., vol. 66, no. 6, pp. 1247-1258, 1994.
15. O.P. Solonenko and M.F. Zhukov, Eds., Thermal Plasma and New Materials Technology, vol. 1: Investigation and Design of Thermal Plasma Generators. Cambridge, U.K.: Cambridge Interscience, 1994, p. 509.
16. D. Neuschutz, H.O. Rossener, and H.J. Bebber, Iron and Steel Engineer, pp. 27-33, May, 1995.
17. X. Zhou and J. Heberlein, in Proc. Heat and Mass Transfer Under Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 237-244.
18. Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 2295-2445, 1996.
19. N. Barcza, "Application of plasma technology to steel processing," in Iron and Steel Soc. of AIME.
20. D. Neuschütz, High Temp. Chem. Process., vol. 1, no. 4, pp. 511-535, 1992.
21. J.F. Coudert, C. Delalondre, P. Roumilhac, O. Simonin, and P. Fauchais, Plasma Chem. Plasma Process., vol. 13, no. 3, pp. 399-4132, 1993.
22. S. Eriksson and S. Santen, "Application of plasma technology to waste steelplant dust treatment," in Iron and Steel Soc. of AIME, ch. 9.
23. D. Morvan, P. Humbert, J. Erin, R. Combes, and J. Amouroux, High Temp. Chem. Process., vol. 1, pp. 197-204, 1992
24. S.V. Dresvin, RFPlasmatrons. Moscow, Russia: Nauka, 1992, p. 318.
25. P.W.J.M. Boumans, Ed., Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy. New York: Wiley, 1986, p. 450.
26. Inductively Coupled Plasma Emission Spectrocopy. New York: Wiley, 1987, p. 800.
27. M.I. Boulos, in Proc. Workshop on Industrial Applications of Plasma Chemistry (ISPC 12) held in conjuction with 12th Int. Symp. on Plasma Chemistry (ISPC 12), J. Heberlein, Ed., Univ. Minnesota, Minneapolis, vol. B, 1995, pp. 89-95
28. C. Oberlin, High Temp. Chem. Process., vol. 3, pp. 719-732, 1994.
29. E. Pfender, Pure Appl. Chem., vol. 60, no. 5, pp. 591-610, 1988.
30. M. Back and A. Gruchov, Pure Appl. Chem., vol. 64, no. 5, pp. 665-677, 1992.
31. G. Engblom and K. Falck, Welding in the World, vol. 30, nos. 7/8, pp. 201-209, 1993.
32. D. Eliot and D. Lemoine, "Plasma cutting and welding," in Plasma in Industry. Avon, France: Doppée Collection, pp. 229-262.
33. W.D. Swank, J.R. Fincke, and D. C. Haggard, in Thermal Spray Science and Technology, C. C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 111-116.
34. P. Gougeon, C. Moreau, and F. Richard, in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 149-155.
35. M.I. Boulos, J. Thermal Spray Technol., vol. 1, no. 1, pp. 33-53, 1991.
36. F. Uchiyama et al., in Thermal Spray: International Advances in Coating Technology, C.C. Berndt, Ed. Ohio: ASM Int., 1992, pp. 105-111.
37. P. Chraska, J. Dubsky, B. Kolman, J. Ilavsky, and J. Forman, J. Thermal Spray Technol., vol. 1, no. 4, pp. 301-306, 1992.
38. P. Chraska and M. Harabovsky, in Thermal Spray: International Advances in Coatings Technol., C.C. Berndt, Ed. Ohio: ASM Int., 1992, pp. 81-87.
39. M. Vardelle, A. Vardelle, P. Fauchais, and I. Saray, Mate. Manufactur. Process., vol. 9, no. 4, pp. 735-755, 1994.
40. C. Moreau, P. Gougeon, A. Bryen, and D. ROSS, in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 141-147.
41. S. Hatakeyama, T. Saga, and H. Hirono, Surface Engineering, vol. 4, no. 3, pp. 220-222, 1988.
42. H. Hallen et al., in Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, Ed. Ohio: ASM Int., 1992, pp. 899-903.
43. G.K. Bhat, "Plasma arc remelting," in Iron and Steel Soc. of AIME, 1987.
44. C. Asada et al., "Plasma induction heating," presented at 3rd Int. Symp. Electroslag Melting Process, Pittsburgh, PA, 1971.
45. H. Yamada, K. Yoshida, and T. Shimiza, Proc. 7th Int. Conf. Vacuum Metallurgy, Tokyo, Japan, 1982, pp. 1086-1093.
46. R.C. Eschenbach, Workshop on Industrial Plasma Applications, M.I. Boulos, Ed., Univ. of Sherbrooke, Canada, 1989, vol. 2, pp. 127-136.
47. H. Pannen, G. Sick, and D.H. Wainhouse, in Proc. 6th World Conf. Titanium, France, 1988, pp. 597-605.
48. M. Mizushina et al, "Development of tundish plasma heating system," in Proc. Conf. Plasma for Industry and Environment, Oxford, U.K., Sept. 1990.
49. M. Shimiza, T. Saito, T. Yasui, H. Fujimoto, N. Kiyokawa, and H.J. Bebber, "Application of a.c. plasma system for tundish heating," in Proc. Conf. Plasma for Industry and Environment, Oxford, U.K., Sept. 1990.
50. H.J. Bebber, High Temp. Chem. Process., vol. 3, pp. 665-676, 1994.
51. J.K. Williams, High Temp. Chem. Process., vol. 3, pp. 707-718, 1994.
52. S.L. Camatcho and J. Dochterman, in Workshop Industrial Plasma Applications, M.I. Boulos, Ed., Univ. of Sherbrooke, Canada, 1989, vol. 2, pp. 9-24.
53. Y. De Lassât, A. Batel, R. Bloise, and R. Drelon, in Workshop Industrial Plasma Applications, M.I. Boulos, Ed., Univ. of Sherbrooke, Canada, 1989, vol. 2, pp. 103-114.
54. J. Thörnblom, in Workshop Industrial Plasma Applications, M.I. Boulos, Ed., Univ. of Sherbrooke, Canada, 1989, vol. 2, pp. 25-38.
55. B. Johansson and U. Lofren, "Operation of scandust plant on stainless seel dust," in Proc. Conf. Plasma for Industry and Environment, Oxford, U.K., Sept. 1990.
56. N.A. Barcza, "The application of d.c. plasma-arc technology to extractive metallurgical processing," High Temp. Chem. Process., vol. 1, pp. 1-15, 1997.
57. H. Gladish, "Hydrocarbon processing," Petroleum Refiner, vol. 41, no. 6, pp. 159-180, 1962.
58. Tioxide: Plasma Process Technology. UK: Tioxide Greatham, 1988.
59. A.L. Hare, R.H. Peeling, and I. Johnson, High Temp. Chem. Process., vol. 1, pp. 561-575, 1992.
60. C. Trassy and R. Diemiaszonek, High Temp. Chem. Process., vol. 3, no. 4, pp. 449-458, 1994.
61. M.J. Copsey, "Plasma technology for the destruction of hazardous wastes," in Proc. Conf. Plasma for Industry and Environment, Oxford, U.K., Sept. 1990.
62. M.R. Fünfschilling, W. Bernhard, H. Bretscher, H. Felix, and J.C. M. Rippestein, "Plasmox, a new plasma technology for hazardous waste destruction and nuclear waste consolidation," in Proc. Conf. Plasma for Industry and Environment, Oxford, U.K., Sept. 1990.
63. R.C. Eschenbach and R.E. Haun, in Workshop Industrial Appl. (ISPC 12), J. Heberlein, Ed., Univ. of Minneapolis, MN, 1995, vol. B, pp. 9-15.
64. D. Cretenot, J. Vanrenterghem, M. Labrot, and D. Pineau, "Waste destruction by plasma," in EPRI Symp., 1990.
65. R.T. Deam and S. Ramakrishnan, "Plasma technology for the destruction of liquid wastes," in 1st Nat. Hazardous and Solid Waste Convention, Sydney, Australia, Apr. 1992.
66. S. Yaoui, K. Adnohi, and T. Inaba, "The status of R & D of thermal plasma applications in Japan."
67. J. Van den Broek, Cahiers Français de l'Electricité, Industrie, July 1992, pp. 13-18.
68. P. Morgensen, "Electrical and mechanical technology of plasma generation and control," Iron and Steel Soc. of AIME, ch. 3.
69. O.I. Yasko, Br.J. Appl. Phys., vol. 2, pp. 733-741, 1969.
70. L. Jestin, B. Pateyron, and P. Fauchais, High Temp. Dust Laden Jets, O.P. Sololenko and A.I. Fedorchenko, Eds. VSP NL, 1989, pp. 211-226.
71. J.F. Brilhac, B. Pateyron, G. Delluc, J.F. Coudert, and P. Fauchais, Plasma Chem. Plasma Process., vol. 15, no. 1, pp. 231-255, 1995.
72. P. Fauchais, J.F. Coudert, and B. Pateyron, "Production of thermal plasmas," Revue Générale de Thermique, vol. 35, pp. 543-560, 1996.
73. F. Tuaz, R. de Framond, B. Paya, and J. Reboux, Cahiers Français de l'Electricité, Industrie, May 1992, pp. 17-21.
74. T. Amano, in Workshop Industrial Plasma Applications (ISPC 9), M.I. Boulos, Ed., Univ. of Sherbrooke, Canada, 1989, pp. 40-49.
75. P. Fâche and B. Paya, "Performance of a high power inductive plasma torch at medium frequency," in Proc. Thermal Plasma Processes 4, Athens, Greece, 1996, P. Fauchais, Ed., Univ. of Limoges, France.
76. A.E. Guile, IEEE Rev., vol. 118, pp. 1131-1156, 1971.
77. in Advances Low Temperature Plasma Chemistry, Technology Application, W. Boenig, Ed. Lancaster, PA: Technomic, 1981, vol. 1, pp. 708-742.
78. B. Jüttner, J. Phys. D., vol. 28, pp. 516-522, 1995.
79. "The nature of arc cathode spots," in High Temp. Chem. Process., to be published.
80. R.N. Szente, R.J. Münz, and M. G. Drouet, J. Phys. D., Appl. Phys., vol. 20, pp. 754-756, 1987.
81. Plasma Chem. Plasma Process., vol. 12, no. 3, pp. 327-344, 1992.
82. D.R. Porto, C.W. Kimblin, and D. T. Tuma, J. Appl. Phys., vol. 53, pp. 4740-4749, 1982.
83. E. Hantzsche, Physica C, vol. 104, pp. 3-12, 1981.
84. A.E. Guile and K.A. Nagler, Proc. IEEE, vol. 115, no. 9, pp. 1348-1360, 1968.
85. R.J. Münz and M. Habelrich, Plasma Chem. Plasma Process., vol. 12, no. 2, pp. 203-218, 1992.
86. R.N. Szente, R.J. Münz, and M. G. Drouet, Plasma Chem. Plasma Process., vol. 7, no. 3, pp. 349-364, 1987.
87. Plasma Chem. Plasma Process., vol. 9, no. 1, pp. 121-132, 1989.
88. R.N. Szente, M.G. Drouet, and R. J. Münz, Rev. Sci. Instrum., vol. 61, pp. 1259-1262, 1990.
89. R.N. Szente, R.J. Münz, and M. G. Drouet, J. Phys. D., Appl. Phys., vol. 23, p. 1193, 1990.
90. J. Appl. Phys., vol. 69, pp. 1263-1268, 1991.
91. Plasma Chem. Plasma Process., vol. 12, no. 3, pp. 327-344, 1992.
92. P. Teste, "Contribution to the study of plasma torch electrodes erosionconsequences for the metallurgical," Ph.D. dissertation, Univ. of Paris XI, France, 1994.
93. P. Teste, R. Andlauer, T. Leblanc, J.P. Chabrerie, and P. Pasquini, High Temp. Chem. Process., vol. 3, no. 4, pp. 399-414, 1994.
94. R.C. Eschenbach et ai, IEEE Trans. Nucl. Sci., pp. 103-110, Jan. 1964.
95. M.G. Fey and J. McDonald, AICHE Symp., Ser. 186, vol. 75, pp. 37-46, 1976.
96. A.P. George, Ed., Proc. ISPC 7, Timmermans, Ed., Univ. of Eindhoven, 1985, vol. 1, pp. 207-213.
97. A.L. Hare, R.H. Peeling, and L. Johnson., High Temp. Chem. Process., vol. 1, no. 4, pp. 561-576, 1992
98. M. Ushio, Pure Appt. Chem., vol. 60, pp. 809-814, 1988.
99. M. Ushio, A.A. Sadek, and F. Matsuda, Plasma Chem. Plasma Process., vol. 11, no. 1, pp. 81-102, 1991.
100. in Proc. ISPC II, U. Ehlemann, H.G. Urgon, and K. Wiesemann, Eds., Univ. of Bochum, Germany, 1991, vol. 1, paper 1.3.1.
101. M. Ushio, K. Tamaka, and M. Tunaka, in Proc. Symp. on Heat and Mass Transfer under Thermal Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 265-272.
102. X. Zhou, J. Heberlein, and E. Pfender, "Theoretical study of factors influencing arc erosion of cathode," in Proc. 38th Holm Conf. Electric Contact, 1992.
103. X. Zhou and J. Heberlein, Plasma Sources Sci. Technol., vol. 3, pp. 564-574, 1994.
104. in Proc. Symp. Heat and Mass Transfer under Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 237-243.
105. P. Tsantrizos and W.H. Gauvin, Plasma Chem. Plasma Process., vol. 12, no. 1, pp. 17-34, 1992.
106. X. Zhou and J. Heberlein, Plama Chem. Plasma Process., vol. 16, no. 1, pp. 229S-244S, 1996.
107. B. Pokrzywka, K. Musiol, S. Pellerin, E. Pawelec, and J. Chapelle, "Observation of the arc spot on the electric arc cathode surface," in Proc. 4th Thermal Plasma Processes Conf., Athens, Greece, 1996, P. Fauchais, Ed.
108. G. Scharf and L. Stephan, in Proc. ISPC-10 Bochum, Aug. 1991, U. Ehlemann, H.G. Lergon, and K. Wiessemann, Eds., Univ. of Bochum, 1991, vol. 1, paper 1.4 1.2.
109. N. Sanders, K. Etemadi, K.G. Hsu, and E. Pfender, J. Appt. Phys., vol. 53, no. 6, pp. 4136-4143, 1982.
110. M.F. Lerrol, B. Pateyron, G. Delluc, and P. Fauchais, Rev. Int. Hautes Temp, et Réfrac., vol. 24, pp. 93-108, 1987-1988.
111. [111 K. Nagashima, T. Watanabe, T. Honda, and A. Kanzawa, in Proc. Japanese Symp. Plasma Chem., 1988, vol. 1, pp. 221-229.
112. W.H. Gauvin, Plasma Chem. Plasma Process., vol. 9, no. 4, pp. 655-669, 1989
113. K.U. Maske, Rep. M178. Randburg S.A.: MINTEK, 1985.
114. A. Kaddani, C. Delalondre, O. Simonin, and H. Minoo, High Temp. Chem. Process., vol. 3, no. 4, pp. 441-450, 1994.
115. D. Dégoût and A. Catherinot, J. Phys. D., Appl. Phys., vol. 14, pp. 811-819, 1986.
116. A. Gleizes, L. El Hamidi, B. Chervy, J.J. Gonzalez, and M. Razafinimana, in Proc. Thermal Plasma Processes, Aachen, Germany, 1994, V.D. I. Düsseldorf G., vol. 1166, pp. 49-56, 1995.
117. M. Bouaziz, M. Razafinimana, and A. Gleizes, "Experimental study of the anode region of an argon transferred arc seeded with Cu and Fe vapors," in Proc. 4th Conf. on Thermal Plasma Processes, Athens, Greece, 1996, P. Fauchais, Ed., to be published.
118. E. Pfender, in Proc. Plasma Synthesis and Processing Materials, K. Upadhya, Ed., TMS, 1993, pp. 97-112.
119. H.A. Dinulescu and E. Pfender, J. Appl. Phys., vol. 51, no. 6, pp. 3149-3158, 1980.
120. N.A. Sanders and E. Pfender, J. Appl. Phys., vol. 55, no. 3, pp. 714-732, 1984.
121. E. Leveroni and E. Pfender, "Investigation of the anode boundary layer of free-burning, high intensity arcs," in Proc. ASME Welding Joining Processes, Winter Meet., 1991.
122. E. Pfender, in Proc. Heat and Mass Transfer under Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 223-235.
123. J.M. Sobrino, J.F. Coudert, and P. Fauchais, in Proc. ISPC 12, J. Heberlein, Ed. Mineapolis, MN: Univ. Minnesota Press, 1995, vol. 3, pp. 1455-1461.
124. S.A. Wutzke, E. Pfender, and E.R. G. Eckert, AIAA J., vol. 5, no. 4, pp. 707-716, 1967.
125. J.F. Coudert, M.P. Planche, and P. Fauchais, in Proc. Conf. Heat and Mass Transfer under Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 253-264.
126. J.F. Coudert, M.P. Planche, and P. Fauchais, High Temp. Chem. Process., vol. 3, no. 6, pp. 639-652, 1994.
127. Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 211S-228S, 1996.
128. J.F. Brilhac, B. Pateyron, J.F. Coudert, P. Fauchais, P. Pasquini, and A. Bouvier, High Temp. Chem. Process., vol. 1, no. 3, pp. 421-4127, 1992.
129. J.F. Brilhac, B. Pateyron, J.F. Coudert, P. Fauchais, and A. Bouvier, Plasma Chem. Plasma Process., vol. 15, no. 1, pp. 256-277, 1995.
130. A. Kamiska and M. Dudeck, J. Phys. Ill, vol. 5, pp. 2043-2057, 1995.
131. J.F. Coudert, M.P. Planche, and P. Fauchais, Plasma Chem. Plasma Process., vol. 15, no. 1, pp. 47-69, 1995.
132. J.F. Brilhac, B. Pateyron, P. Fauchais, A. Bouvier, P. Paquini, and L. Jestin, High Temp. Chem. Process., vol. 1, no. 3, pp. 557-562, 1992.
133. H. Minoo, A. Arsaoui, and A. Bouvier, in Proc. 4th Conf. Thermal Plasma Processes, D. Neuschütz, Ed. Düsseldorf, Germany: VDI Berichte, 1995, vol. 1166, pp. 219-228.
134. A. Arsaoui, H. Minoo, A. Bouvier, and L. Jestin, in Proc. 4th Conf. Thermal Plasma Processes, D. Neuschtz, Ed. Düsseldorf, Germany: VDI Berichte, 1995, pp. 229-238.
135. H. Minoo, A. Arsaoni, and A. Bouvier, J. Phys. D., Appl. Phys., vol. 28, pp. 1630-1651, 1995.
136. P. Roumilhac, J.F. Coudert, and P. Fauchais, Mat. Res. Soc. Symp. Process., vol. 190, pp. 227-238, 1991
137. M.I. Boulos, P. Fauchais, and E. Pfender, Thermal Plasmas: Funda-mentals and Applications Vol. 1. New York: Plenum, 1994, p. 452.
138. A.H. Dilawari and J. Szekely, Int.J. Heat Mass Transf., vol. 30, pp. 2357-2372, 1987.
139. C.H. Chang and E. Pfender, Plasma Chem. Plasma Process., vol. 10, p. 473, 1990.
140. Y.P. Chyou and E. Pfender, Plasma Chem. Plasma Process., vol. 9, p. 291, 1989.
141. C.H. Chang and J.D. Ramshaw, Plasma Chem. Plasma Process., vol. 16, pp. 5S-18S, 1996
142. J.W. Me Kelliget and J. Szekely, J. Phys. D., Appl. Phys., vol. 16, 1983.
143. J.W. Me Kelliget, J. Szekely, M. Vardelle, and P. Fauchais, Plasma Chem. Plasma Process., vol. 2, pp. 317-332, 1982.
144. J. Mostaghimi, P. Proulx, and M.I. Boulos, J. Num. Heat Transfer, vol. 8, pp. 187-201, 1985.
145. G.Y. Zhao, J. Mostaghimi, and M.I. Boulos, Plasma Chem. Plasma Process., vol. 10, pp. 133-150, 1990.
146. K.C. Hsu, K. Etemadi, and E. Pfender, J. Phys. D., Appl. Phys., vol. 54, p. 54, 1983.
147. H. Ouajji, B. Cheminât, and Andanson, J. Phys. D., Appl. Phys., vol. 20, pp. 635-638, 1987.
148. B. Pateyron, G. Delluc, M.F. Elchinger, and P. Fauchais, in Proc. Heat and Mass Transfer under Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 445-461.
149. T.H. Caesar, H. Bollmann, and H. Wilhelmi, "Thermodynamic and transport properties of non equilibrium thermal plasmas containing chlorinated hydrocarbons between 1000 and 30000 K," in Proc. 4th Conf. Thermal Plasma Processes, Athens, Greece, 1996, P. Fauchais, Ed., to be published.
150. B. Pateyron, M.F. Elchinger, G. Delluc, and P. Fauchais, Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 39-57, 1996.
151. Plasma Chem. Plasma Process., vol. 12, no. 4, pp. 421-4147, 1992.
152. W.L.T. Chen, J. Heberlein, E. Pfender, B. Pateyron, G. Delluc, M. F. Elchinger, and P. Fauchais, Plasma Chem. Plasma Process., vol. 15, no. 3, pp. 559-579, 1995.
153. M. Capitelli, R. Celiberto, C. Gorse, and D. Giordano, Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 267S-302S, 1996.
154. A. Gleizes, J.J. Gonzalez, B. Liani, and B. Rahmani, J. de Physique, vol. 51, no. C5, pp. 213-220, 1990.
155. A. Gleizes etal., J. Phys. D., Appl. Phys., vol. 26, pp. 1921-1935, 1993.
156. H. Riad, J.F. Gonzalez, and A. Gleizes, in Proc. ISPC 12, J. Heberlein, Ed., Univ. of Minnesota, Minneapolis, 1995, vol. 3, pp. 1731-1737.
157. A. Essoltani, P. Proulx, M.I. Boulos, and A. Gleizes, Plasma Chem. Plasma Process., vol. 14, no. 3, pp. 301-316, 1994.
158. A.B. Murphy, in Proc. Conf. Heat and Mass Transfer under Plasma Conditions, Cesme, Turkey, July 1994, P. Fauchais, Ed. New York: Begell House, 1995, pp. 151-158.
159. Plasma Chem. Plasma Process., vol. 15, no. 2, pp. 279-308, 1995
160. S. Vacquié, High Temp. Chem. Process., vol. 3, no. 6, pp. 613-626, 1994.
161. J.D. Ramshaw and C.H. Chang, Plasma Chem. Plasma Process., vol. 13, no. 3, pp. 489-498, 1993.
162. D.E. Rapakoulias and D.S. Mataras, High Temp. Chem. Process., vol. 1, no. 4, pp. 485-510, 1992.
163. D. Kolman, J. Heberlein, E. Pfender, and R. Young, Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 57S-69S, 1996.
164. S.L. Girshick and B.W. Yu, in Proc. Conf. on Heat and Mass Transfer under Plasma Conditions, Cesme, Turkey, July, 1994, P. Fauchais, Ed. New York: Begell House, 1995, pp. 471-480.
165. J.P. Sarrette, A.M. Gomes, and J. Bacri, in Proc. Conf. Heat and Mass Transfer under Plasma Conditions, Cesme, Turkey, July 1994, P. Fauchais, Ed. New York: Begell House, 1995, pp. 119-126
166. S.L. Girshick and B.L. Yu, in Heat and Mass Transfer under Thermal Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 471-482.
167. C.H. Chang and J.D. Ramshaw, Phys. Plasmas, vol. 1, p. 3698, 1994.
168. S.H. Paik and E. Pfender, Plasma Chem. Plasma Process., vol. 10, p. 167, 1990
169. A. Kaddani, EOF Rep. HE44/95/012/A, 1995.
170. B.Z. Launder and D.B. Spalding, Lectures in Mathematical Models of Turbulence. New York: Academic, 1972.
171. J.D. Ramshaw and C.H. Chang, Plasma Chem. Plasma Process., vol. 12, p. 299, 1992.
172. J.R. Fincke, C.H. Chang, W. D. Swank, and D. C. Haggard, Int. J. Heat Mass Transfer, vol. 37, p. 1673, 1994.
173. P.L. Viollet, M. Gabillard, and N. Mechitoua, Revue Phys. AppL, vol. 25, pp. 843-857, 1990.
174. H.L. Larsen and J.A. Bakken, in Proc. Thermal Plasma Process., Aachen, Germany, 1994. Düsseldorf, Germany: V.D.I. Berichte, vol. 1166, 1995, pp. 137-144.
175. C. Delalondre, S. Zahrai, O. Simonin, in Heat and Mass Transfer under Thermal Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 1-14.
176. P.C. Huang, J. Heberlein, and E. Pfender, Plasma Chem. Plasma Process., vol. 15, p. 25, 1995
177. W.L.T. Chen and E. Pfender, "Enthalpy probe and spectroscopic measurements in thermal plasma jets," Univ. Minnesota, High Temperature Laboratory Rep., Mar. 1990.
178. J. Jenista, J. Heberlein, and E. Pfender, in 4th Symp. on Thermal Plasma Processes, Athens, Greece, July 1996, P. Fauchais, Ed.
179. G.Y. Zhao, M. Dassanayake, and K. Etemadi, Plasma Chem. Plasma Process., vol. 10, pp. 87-98, 1990.
180. A. Kaddani, C. Delalondre, O. Simonin, and H. Minoo, EOF Rep. HE-44/93.30, 1993.
181. EOF Rep. HE-44/92.17, 1992.
182. S. Paik, P.C. Huang, J. Heberlein, and E. Pfender, Plasma Chem. Plasma Process., vol. 13, pp. 379-398, 1993.
183. X. Chen and E. Pfender, Plasma Chem. Plasma Process., vol. 11, no. 1, pp. 103-128, 1991.
184. S.L. Girshick and W. Yu, Plasma Chem. Plasma Process., vol. 10, no. 4, pp. 515-529, 1990.
185. M. Rahmane, G. Soucy, and M.I. Boulos, Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 169S-189S, 1996.
186. D. Kolman, J. Heberlein, and E. Pfender, in Proc. ISPC 13, C.K. Wu, Ed., Univ. of Beijing, China, Aug. 1997.
187. M.I. Boulos, P. Fauchais, A. Vardelle, and E. Pfender, "Fundamentals of plasma particle momentum and heat transfer," in Plasma Spraying: Theory and Applications, R. Suryanarayanan, Ed. Singapore: World Scientific, 1993, pp. 3-60.
188. B. Dussoubs, A. Vardelle, K.I. Li, and M. Vardelle, in 12th Int. Symp. on Plasma Chem., J. Heberlein, Ed., Univ. Minnesota, vol. 3, pp. 1343-1349, 1995.
189. M. Vardelle, A. Vardelle, A.C. Léger, P. Fauchais, and D. Gobin, J. Thermal Spray Technol., vol. 4, no. 1, pp. 50-58, 1995.
190. J.R. Fincke, R. Rodriguez, and C.G. Pentecost, in Proc. Mat. Res. Soc. Symp., vol. 190, pp. 184-190, 1991.
191. E. Pfender, J.R. Fincke, and R. Spores, Plasma Chem. Plasma Process., vol. 1, no. 4, pp. 529-544, 1991.
192. E. Pfender, Plasma Chem. Plasma Process., vol. 9, no. 1, pp. 167S-188S, 1989.
193. R.M. Young and E. Pfender, Plasma Chem. Plasma Process., vol. 7, no. 2, pp. 211-219, 1987.
194. P. Proulx, J. Mostaghimi, and M.I. Boulos, Plasma Chem. Plasma Process., vol. 7, no. 1, pp. 29, 52, 1987.
195. W.H. Zhao and H. Xie, in Heat and Mass Transfer under Plasma Conditions, P. Fauchais, Ed. New York: Begell House, 1995, pp. 177-186.
196. J.R. Fincke, Pure Appl. Chem., vol. 68, no. 5, pp. 1001-1006, 1996.
197. S. Cavadias and J. Amouroux, High Temp. Chem. Process., vol. 3, no. 6, pp. 689-706, 1994.
198. P. Fauchais, J.F. Coudert, M. Vardelle, A. Vardelle, and A. Denoirjean, J. Thermal Spray Technol., vol. 1, no. 2, pp. 117-128, 1992.
199. P. Fauchais, J.F. Coudert, and M. Vardelle, "Diagnostics in thermal plasma processing, in plasma diagnostics," Vol. 1, O. Auciello and D.L. Flamm, Eds. New York: Academic, 1989, pp. 349-4446.
200. D. Gavelle, M. Beaulieu, C. Carbone, and M.I. Boulos, in ISPC 6, M.I. Boulos, Ed., Canada, vol. 1, pp. 109-114, 1983.
201. S. Megy, S. Bousrih, J.M. Baronnet, E.A. Ershov-Pavlov, J. K. Williams, and D. M. Iddles, Plasma Chem. Plasma Process., vol. 15, no. 2, pp. 309-331, 1995.
202. J.F. Coudert and P. Fauchais, High Temp. Chem. Process., vol. 3, no. 1, pp. 443-453, 1992.
203. A.B. Murphy, Rev. Sci. Instrum., vol. 65, pp. 3423-3427, 1994.
204. Pure Appl. Chem., vol. 68, pp. 1137-1142, 1996.
205. J. Phys. D, Appl. Phys., vol. 29, pp. 1922-1932, 1996.
206. M. Vardelle, A. Vardelle, C. Trassy, and P. Fauchais, Plasma Chem. Plasma Process., vol. 11, no. 2, pp. 185-201, 1991.
207. M. Vardelle, K.-I. Li, P. Fauchais, and C. Trassy, "Experimental investigation of metal particle vaporization in plasma spraying," in 4th Symp. Thermal Plasma Processes, Athens, Greece, July 1996, P. Fauchais, Ed.
208. S.C. Snyder, L.D. Reynolds, G. Lassahn, J. R. Fincke, C. Shaw, and Kearney R., Phys. Rev. E, vol. 47, pp. 1996-2005, 1993.
209. S.C. Snyder, L.D. Reynolds, J. R. Fincke, G. D. Lassahn, J. D. Grandy, and T. E. Repetti, Phys. Rev. E, vol. 50, pp. 519-529, 1994.
210. D. Lapierre, R.J. Kearney, M. Vardelle, A. Vardelle, and P. Fauchais, Plasma Chem. Plasma Process., vol. 14, no. 4, pp. 407-4123, 1994.
211. W.L.T. Chen, J. Heberlein, and E. Pfender, Plasma Chem. Plasma Process., vol. 14, no. 3, pp. 317-332, 1994.
212. W.P. Swank, J.R. Fincke, and D. Haggard, Rev. Sci. Instrum., vol. 52, pp. 64-72, 1993.
213. M. Rahmane, G. Soucy, and M.I. Boulos, in Proc. 3rd Thermal Plasma Process., Athens, Greece, July 1996, D. Neuschütz, Ed. Düsseldorf, Germany: V.D.I. Berichte, vol. 1166, 1995, pp. 115-164.
214. E. Pfender and M.I. Boulos, Diagnostics Techniques and Advanced Course on Thermal Plasmas Technology and Applications, M.I. Boulos, Ed. Ohio: ASM Int., 1983.
215. M. Brossa and E. Pfender, Plasma Chem. Plasma Process., vol. 8, no. 1, pp. 75-84, 1988.
216. G. Soucy, J.W. Jurewicz, and M.I. Boulos, Plasma Chem. Plasma Process., vol. 15, no. 4, pp. 693-710, 1995.
217. M. Rahmane, G. Soucy, and M.I. Boulos, Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 169S-190S, 1996.
218. W.L.T. Chen, J. Heberlein, and E. Pfender, Plasma Chem. Plasma Process., vol. 14, no. 3, pp. 317-332, 1994.
219. J.R. Fincke, W.D. Swank, and D. C. Haggard, J. Thermal Spray Technol, vol. 2, no. 4, pp. 345-350, 1993.
220. T. Huffman, Adv. Mater. Process., vol. 140, no. 3, pp. 37-43, 1991.
221. [221 ] T.A. Detering, J.R. Kimble, and T. L. Eddy, in Thermal Spray Research and Application, T. F. Bernecki, Ed. Ohio: ASM Int., 1990, pp. 27-33.
222. X. Wang, J. Heberlein, E. Pfender, and W. Gerberich, in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 31-37.
223. W.L.T. Chen, E. Pfender, and R. Spores, in Thermal Spray Research and Applications, T. F. Bernecki, Ed. Ohio: ASM Int., 1990, pp. 1-10.
224. F. Monerie-Moulin, F. Gitzhofer, P. Fauchais, M.I. Boulos, and A. Vardelle, High Temp. Chem. Process., vol. 1, no. 3, pp. 249-258, 1992.
225. J.M. Badie, B. Granier, and B. Bonduelle, J. de Phys., vol. C5-18, pp. 273-277, 1990.
226. G. Chambon, P. Lucchese, and P. Fauchais, in Heat and Mass Transfer under Plasma Conditions, Cesme, Turkey, 1994, P. Fauchais, Ed. New York: Begell House, 1995, pp. 323-333.
227. G. Simard, M.I. Boulos, and A. Charette, in Proc. 3rd European Congress on Thermal Plasma Processes, D. Neuschütz, Ed. Düsseldorf, Germany: V.D.I. Berichte, vol. 1166, 1995, pp. 97-104.
228. P. Pavlovic, P. Stefanovic, and V. Vujovic, in Heat and Mass Transfer under Plasma Conditions, Cesme, Turkey, 1994, P. Fauchais, Ed. New York: Begell House, 1995, pp. 315-322.
229. G. Gouesbet, Plasma Chem. Plasma Process., vol. 5, no. 2, pp. 91-117, 1985.
230. M.F. Smith, T.J. O'Hern, J. E. Brockmann, R. A. Neiser, and T. J. Roemer, in Thermal Spray Science and Technology, C. C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 105-110.
231. [231 ] A.C. Eckbreth and W. Roman, in Thermal Technology, New Ideas and Processes, D.L. Houck, Ed. Ohio: ASM Int., 1989, pp. 47-54.
232. W.C. Roman, M. Winter, A.A. Rotunno, K. Fessenden, and W. Willen, in Thermal Spray Research and Applications, T. F. Bernecki, Ed. Ohio: ASM Int., 1990, pp. 49-58.
233. K.-I. Li, M. Vardelle, and P. Fauchais, in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 45-50.
234. J. Mishin, M. Vardelle, J. Lesinski, and P. Fauchais, J. Phys. Sci. Instrum., vol. 20, pp. 620-632, 1987.
235. T. Sakuta and M.I. Boulos, Rev. Sci. Instrum., vol. 59, pp. 285-294, 1988.
236. S. Coulombe, M.I. Boulos, and T. Sakuta, Meas. Sci. Tech., vol. 6, pp. 383-394, 1995.
237. S. Coulombe and M.I. Boulos, Plasma Chem. Plasma Process., vol. 15, no. 4, pp. 653-676, 1995.
238. M. Vardelle, A. Vardelle, P. Fauchais, and C. Moreau, Meas. Sci. Technol, vol. 5, pp. 205-212, 1994.
239. A.C. Léger, M. Vardelle, A. Vardelle, B. Dussoubs, and P. Fauchais, in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 169-174.
240. A. Vardelle, M. Vardelle, P. Fauchais, and D. Gobin, NATO Ser. E, Appl. Sci., T.W. Davies, Eds., vol. 282, pp. 95-121, 1995.
241. R.W. Smith, Powder Metallurgy Int., vol. 25, no. 1, pp. 9-16, 1993.
242. R.W. Smith and Mutasim, J. Thermal Spray Technol., vol. 1, no. 1, pp. 57-64, 1992
243. R.W. Smith and M. Mohanty, in Thermal Spray Science and Technol-ogy, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 73-77.
244. Y. Borisov and A. Borisova, in Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1993, pp. 429-435.
245. M.I. Boulos, Pure Appl. Chem., vol. 68, no. 5, pp. 1007-1010, 1996.
246. M. Mellali, P. Fauchais, and A. Grimaud, Surf. Coating Technol., vol. 81, pp. 275-286, 1996.
247. E. Lugsheider and I. Russ, in Thermal Spray Coatings: Research, Design and Applications, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1993, pp. 329-335.
248. D. Neuschütz, Pure Appl. Chem., vol. 68, no. 5, pp. 1159-1170, 1996.
249. R. Poiroux and M. Rollin, Pure Appl. Chem., vol. 68, no. 5, pp. 1035-1040, 1996.
250. C.B. Laflamme, M.G. Drouet, J. Meunier, A. Biscaro, My D. Handfield, and C. Lemire, in Workshop Industrial Applications Plasma Chemistry, MN, ISPC 12, J. Heberlein, Ed., vol. B, pp. 33-42, 1995.
251. P. Tardy et al., in Workshop Industrial Applications Plasma Chemistry, MN, ISPC 12, J. Heberlein, Ed., vol. B, pp. 27-31, 1995.
252. W. Hoffeiner and M.R. Fünfschilling, in Workshop Industrial Applica-tions Plasma Chemistry, MN, ISPC 12, J. Heberlein, Ed., vol. B, pp. 3-7, 1995.
253. V.N. Gurarie, Metals Forum, vol. 7, no. l, pp. 12-21, 1984.
254. V.A. Linnik et at., Metattovedenie i Termicheskaya Obrabotka Metattov. New York: Plenum, Apr. 1983, vol. 4, pp. 241-245.
255. T. Kimura and T. Miyazaki, Bull. Japan Soc. Precis. Eng., vol. 24, no. 4, pp. 269-274, 1990.
256. F.W. Giacobbe, High Temp. Technol., vol. 8, no. 1, pp. 3-8, 1990.
257. J.M. Sobrino et al., Traitement Thermique, vol. 258, pp. 83-92, 1992.
258. A. Lawley, P. Mathur, D. Apelian, and A. Meystel, Powder Metallurgy, vol. 33, no. 2, pp. 109-111, 1990.
259. T. McKechnie, P. Krotz, Y. Liaw, F. Zimmerman, and R. Holmes, in Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1994, pp. 457-461.
260. J. Rastegar, Y. Qiu, C.C. Berndt, H. Herman, S. Sampath, and Q. Tu, in Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1994, pp. 463-468.
261. G. Montavon, E. Roussel, C. Coddet, D. Cornu, J.M. De Monticault, E. Fauvet, J.P. Huchin, J. C. Garcia, and F. Pellerin, in Thermal Spray Industrial Applications, C. C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1994, pp. 485-489.
262. P.D. Krotz, Y. Liaw, T.N. Me Kechnie, R. Holmes, and F. Zimmerman, in Thermal Spray Science and Technology, C. C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 729-735.
263. R. Gansert, S. Sampath, C.C. Berndt, H. Herman, and P. Chraska, in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1995, pp. 723-728.
264. B. He, F. Tangerman, and Wan der Woude, in Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, Eds. Ohio: ASM Int., 1994, pp. 415-119.
265. K. Hortman, R. Krishnan, R. Merz, G. Neplotnik, F.B. Prinz, L. Schultz, M. Terk, and L.E. Weiss, in Proc. 1994 IEEE Int. Conf. on Robotics and Automation.
266. R.M. Young and E. Pfender, Plasma Chem. Plasma Process., vol. 5, no. l, pp. 1-37, 1985.
267. J.M. Baronnet, J. High Temp. Chem. Process., vol. l, no. 4, pp. 577-598, 1992
268. F. Gitzhofer, Pure Appl. Chem., vol. 68, no. 5, pp. 1113-1120, 1996.
269. N. Ohtake and M. Yoshikawa, J. Electrochem. Soc., vol. 137, pp. 717-722, 1990.
270. E. Pfender, Q.Y. Han, T.W. Or, Z. P. Lu, and J. Heberlein, Diamond Rel. Mater., vol. l, pp. 127-133, 1992.
271. T. Yoshida, Pure Appl. Chem., vol. 66, no. 6, pp. 1223-1230, 1994.
272. D.F. Bradley, S.M. Jaffe, and L. K. Bigelow, in Workshop Industrial Applications Plasma Chemistry, MN, ISPC 12, J. Heberlein, Ed., vol. B, pp. 77-88, 1995
273. G. Flamant, Pure Appl. Chem., vol. 66, no. 6, pp. 1231-1238, 1994.
274. M.N. Mohammedi, S. Cavadias, J.L. Leuenberger, E. Francke, and J. Amouroux, Plasma Chem. Plasma Process., vol. 16, no. 1, pp. 191S-210S, 1996.