Uncertainties and dynamic problems of bolted joints and other fasteners

Journal of Sound and Vibration

Volumn 279, Issue 3-5, 2005, Pages 857-936

  Ibrahim, R A ^a   Pettit, C L ^b  

^a Wayne State University   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MATERIALS; DYNAMIC LOADS; FAILURE ANALYSIS; FASTENERS; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; PLASTICITY; PROBABILITY DISTRIBUTIONS; RANDOM PROCESSES; RELAXATION PROCESSES;

COMPOSITE JOINTS; ENVIRONMENTAL DYNAMIC LOADING; NON-LINEAR COMPRESSION; STOCHASTIC FINITE ELEMENT METHOD (FEM);

BOLTED JOINTS;

EID: 9644254353     PISSN: 0022460X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jsv.2003.11.064     Document Type: Article

References (516)

1. M.M. Frocht, H.N. Hill, Stress-concentration factors around a central circular hole in a plate loaded through a pin in the hole, ASME Journal of Applied Mechanics 7 (1940) A4-A9.
2. J.L. Dohner, White paper: on the development of methodologies for constructing predictive models of structures with joints and interfaces, Sandia National Laboratories SAND2001-0003P, 2001.
3. R.A. Ibrahim, Structural dynamics with parameter uncertainties, American Society of Mechanical Engineers, Applied Mechanics Reviews 40 (1987) 309-328.
4. G.I. Schuëller, State-of-the-art report on computational stochastic mechanics, Probabilistic Engineering Mechanics 12 (1997) 199-321.
5. C.S. Manohar, R.A. Ibrahim, Progress in structural dynamics with stochastic parameter variations: 1987-98, American Society of Mechanical Engineers, Applied Mechanics Reviews 52 (1999) 177-197.
6. J.W. Fisher, J.H.A. Struik, Guide to Design Criteria for Bolted and Riveted Joints, Wiley, New York, 1974.
7. J.H. Bickford, The bolting technology council and the search for more accurate preload, ASME Pressure Vessels and Piping Conference on Advances in Bolted Joint Technology, PVP-Vol. 158, 1989, pp. 1-6.
8. J.H. Bickford, J.H., An Introduction to the Design and Behavior of Bolted Joints, 2nd Edition, Marcel Dekker Inc., New York, 1990.
9. J.H. Bickford, S. Nassar, Handbook of Bolts and Bolted Joints, Marcel Dekker, New York, 1998.
10. J.S. Mitchell, Large Industrial Threaded Fasteners, High-gate Publications Beverley Limited, Beverly, 1993.
11. R.O. Parmley (Ed.), Standard Handbook of Fastening and Joining, McGraw-Hill, New York, 1997.
12. J.A. Speck, Mechanical Fastening, Joining, and Assembly, Marcel Dekker Inc., New York, 1997.
13. B.D. Agarwal, L.J. Broutman, Analysis and Performance of Fiber Composites, Wiley, New York, 1990.
14. E.E. Ungar, Energy dissipation at structural joints: mechanisms and magnitudes, Technical Documentary Report No. FDL-TDR-64-98, Air Force Flight Dynamics Lab, Wright-Patterson Air Force Base, OH, 1964.
15. E.E. Unger, The status of engineering knowledge concerning the damping of built-up structures, Journal of Sound and Vibration 26 (1973) 141-154.
16. J. Tajima, Effects of relaxation and creep on the slip load of the high strength bolted joints, Structural Design Office, Japanese National Railways, Tokyo, 1964.
17. E. Chesson Jr. W.H. Munse, Studies of the behavior of high-strength bolts and bolted joints, Bulletin 469, University of Illinois, Experimental Station, 1964.
18. M. Groper, V. Bausic, G. d'Albon, Measuring and control method for the prestressing force and its variation in time of high tensile bolts, Studii si Cercetari, Seria Const Metalice (7), INCRC, Bucuresti, Romania, 1966.
19. P.D. Herrington, M. Sabbaghian, Factors affecting the friction coefficients between metallic washers and composite surfaces, Composites 22 (1991) 418-424.
20. P.D. Herrington, M. Sabbaghian, Effect of radial clearance between bolt and washer on the bearing strength of composite bolted joints, Journal of Composite Material 26 (1992) 1826-1843.
21. S.W.E. Earles, Theoretical estimation of the frictional energy dissipation in a simple lap joint, Journal of Mechanical Engineering Science 8 (1966) 207-214.
22. M. Masuko, Y. Ito, K. Yoshida, Theoretical analysis of a damping ratio of a jointed cantilever beam, Bulletin of Japanese Society of Mechanical Engineering 16 (1973).
23. M. Masuko, Y. Ito, T. Koizumi, Horizontal stiffness and microslip on a bolted joint subjected to repeated tangential static loads, Bulletin of Japanese Society of Mechanical Engineering 17 (1974).
24. N. Nishiwaki, M. Masuko, Y. Ito, I. Okumura, A study on damping capacity of a jointed cantilever beam, Bulletin of Japanese Society of Mechanical Engineering 21 (1978).
25. R.S. Richardson, H. Nolle, Energy dissipation in rotary structural joints, Journal of Sound and Vibration 54 (1977) 577-588.
26. L. Jezequel, Structural damping by slip in joints, American Society of Mechanical Engineers, Journal of Vibration, Acoustics Stress, Reliability, and Design 105 (1983) 497-504.
27. K.K. Padmanabhan, A.S.R. Murty, Damping in structural joints subjected to tangential loads, Institute of mechanical Engineering Proceedings 205 (1991) 121-130.
28. T.J. Hertz, E.F. Crawley, Damping in space structure joints, AIAA Dynamic Specialty Conference, Palm Springs, CA, 17-18 May 1984, AIAA Paper 84-1039-CP, 1984.
29. T.J. Hertz, E.F. Crawley, Displacement dependent friction in space structure joints, American Institute of Aeronautics and Astronautics Journal 24 (1985) 1998-2000.
30. A.A. Ferri, Investigation of damping from nonlinear sleeve joints of large space structures, Proceedings of the ASME 11th Biennial Conference of Mechanical Vibration and Noise, DE-Vol. 5, Boston, MA, 1987, pp. 187-195.
31. A.A. Ferri, Modeling and analysis of nonlinear sleeve joints of large space structures, Journal of Spacecraft and Rockets 25 (1988) 354-360.
32. A.A. Ferri, Damping and vibration of beams with various types of frictional support conditions, Proceedings of the AIAA/ASME/ASCE/AHS/ASC 30th Structures, Structural Dynamics, and Material Conference, Washington, DC, 1989, pp. 782-787.
33. A.A. Ferri, A.C. Bindmann, Damping and vibration of beams with various types of frictional support conditions, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 114 (1992) 289-296.
34. S.L. Folkman, F. J. Redd, Gravity effects on damping of a space structure with pinned joints, Journal of Guidance and Control Dynamics 13 (1990) 228-233.
35. S.L. Folkman, E.A. Roswell, G.D. Ferney, Influence of pinned joints on damping and dynamic behavior of a truss, Journal of Guidance and Control Dynamics 18 (1995) 1398-1403.
36. C.F. Beards, Damping in structural joints, The Shock and Vibration Digest 14 (1982) 9-11.
37. C.F. Beards, The damping of structural vibration by controlled interface slip in joints, American Society of Mechanical Engineers, Journal of Vibration, Acoustics, Stress analysis, Reliability, and Design 105 (1983) 369-373.
38. C.F. Beards, Damping in structural joints, The Shock and Vibration Digest 17 (1985) 17-20.
39. C.F. Beards, Damping in structural joints, The Shock and Vibration Digest 21 (1989) 3-5.
40. C.F. Beards, Damping in structural joints, The Shock and Vibration Digest 24 (1992) 3-7.
41. R.Y. Lee, Assessment of Linear and Nonlinear Joint Effects on Space Truss Booms, M.S. Thesis, Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, MA, June 1985.
42. J. Prucz, A.D. Reddy, L.W. Rehfield, R.W. Trudell, Experimental characterization of passively damped joints for space structures, Journal of Spacecraft and Rockets 23 (1986) 568-575.
43. J. Prucz, Analysis of design tradeoffs for passively damped structural joints, Journal of Spacecraft and Rockets 23 (1986) 576-584.
44. M.L. Bowden, Dynamics of Space Structures with Nonlinear Joints, Sc.D. Thesis, Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, Cambridge, MA, May 1988.
45. M.L. Bowden, J. Dugundji, Joint damping and nonlinearity in dynamics of space structures, American Institute of Aeronautics and Astronautics Journal 28 (1990) 740-749.
46. M. Groper, J. Hemmye, The dissipation of energy in high strength friction grip bolted joints, Proceedings of SESA Spring Conference, Cleveland, OH, 1983.
47. M. Groper, J. Hemmye, Partial slip damping in high strength friction grip bolted joints, Proceedings of the Fourth International Conference of Mathematical Modeling, Pergamon Press, New York, 1983.
48. M. Groper, Microslip and macroslip in bolted joints, Experimental Mechanics 25 (1985) 172-174.
49. L. Gaul, R. Nitsche, R., The role of friction in mechanical joints, American Society of Mechanical Engineers, Applied Mechanics Reviews 54 (2001) 93-106.
50. Y.S. Shin, K.S. Kim, J.C. Iverson, Analytical and experimental investigations of the damping characteristics of bolted and welded structural connections for plates and shells, part 1 : a literature survey on friction damping in joints, NPS-69-86-011, Naval Postgraduate School, 1986.
51. R.A. Ibrahim, Friction-induced vibration, chatter, squeal, and chaos, Part I: mechanics of contact and friction, American Society of Mechanical Engineers, Applied Mechanics Reviews 47 (1994) 209-226.
52. R.A. Ibrahim, Friction-induced vibration, chatter, squeal, and chaos, part II: dynamics and modeling, American Society of Mechanical Engineers, Applied Mechanics Reviews 47 (1994) 227-253.
53. C. Andrew, J.A. Cockburn, A.E. Waring, Metal surfaces in contact under normal forces: some dynamic stiffness and damping characteristics, Proceedings of the Institute of Mechanical Engineering 182 Part 3K, 1968, pp. 92-100.
54. P.P. Robers, G. Boothroyd, Damping at metallic interfaces subjected to oscillating tangential load, ASME Paper 74-WA/Prod 9, 1974.
55. S. Vitelleschi, L.C. Schmidt, Damping in friction-grip bolted joints, American Society of Civil Engineers, Journal of Structure Division 103 (1977) 1447-1460.
56. C. Dekoninch, Deformation properties of metallic contact surfaces of joints under the influence of dynamic tangential loads, International Journal of Machine Tool Design and Research 12 (1972) 193-199.
57. B.R. Hanks, D.G. Stephens, Mechanisms and scaling of damping in a practical structural joint, Shock and Vibration Bulletin 36 (1967) 1-8.
58. C.B. Brown, Factors affecting the damping in a lap joint, American Society of Civil Engineers, Journal of Structures Division 96 (1968) 1197-1217.
59. F.C. Nelson, D.F. Sullivan, Damping in joints of built-up structures, Environmental Technology 76, 22nd Annual Meeting, Institute of Environmental Science, 1976.
60. C.F. Beards, J.L. Williams, The damping of structural vibration by rotating slip in joints, Journal of Sound and Vibration 53 (1977) 333-340.
61. C.F. Beards, I.M.A. Imam, The damping of plate vibration by interfacial slip between layers, International Journal of Machine Tool Design and Research 18 (1978) 131-137.
62. C.F. Beards, Woodwat, The control of frame vibration by friction damping in joints, American Society of Mechanical Engineers, Journal of Vibration, Acoustics, Stress Analysis, Reliability, and Design 107 (1985) 27-32.
63. E.H. Dowell, 1986, Damping in beams and plates due to slipping at the support boundaries, Journal of Sound and Vibration 105 (1986) 243-253.
64. D.M. Tang, E.H. Dowell, Damping in beams and plates due to slipping at the support boundaries, part 2: numerical and experimental study, Journal of Sound and Vibration 108 (1986) 509-522.
65. D.M. Tang, E.H. Dowell, Random response of beams and plates with slipping at support boundaries, American Institute of Aeronautics and Astronautics Journal 24 (1986) 1354-1361.
66. Y.S. Shin, J.C. Iverson, K.S. Kim, Experimental studies on damping characteristics of bolted joints for plates and shells, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 113 (1991) 402-408.
67. D.J. Segalman, Observations on simulation of joint friction, CDROM-Proc 1999 ASME Design Engineering Technical Conference, DETC99/VIB-8188, 1-7, Las Vegas, NV, 1999.
68. D.J. Segalman, An Initial Overview of Iwan Modeling for Mechanical Joints, Technical Report, Sandia National Laboratories, SAND2001 -0811, 2001.
69. W.D. Iwan, On a class of models for the yielding behavior of continuous composite systems, American Society of Mechanical Engineers, Journal of Applied Mechanics 89 (1967) 612-617.
70. J. Esteban, F. Lalande, Z. Chaudhry, C.A. Rogers, Theoretical modeling of wave propagation and energy dissipation in joints, Proceedings of the 37th AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, Salt Lake City, 1996.
71. J. Esteban, C.A. Rogers, Energy dissipation through joints: theory and experiments, Computers and Structures 75 (2000) 347-359.
72. J.F. Wilson, E.G. Callis, The dynamics of loosely jointed structures, International Journal of Non-linear Mechanics 39 (2004) 503-514.
73. S. Song, et al., Contact area of bolted joint interface: analytical, finite element modeling and experimental study, ASME Winter Annual Meeting EEP 3, 1992, pp. 73-81.
74. S. Song, et al., Experimental study and modeling of thermal contact resistance across bolted joints, Journal of Thermophysics and Heat Transfer 8 (1994) 159-163.
75. H. Rothert, et al., Non-linear three-dimensional finite element contact analysis of bolted connections in steel frames, International Journal of Numerical Methods in Engineering 34 (1992) 303-318.
76. K. Iyer, Peak contact pressure, cyclic stress amplitudes, contact semi-width and slip amplitude: relative effects on fretting fatigue life, International Journal of Fatigue 23 (2001) 193-206.
77. K. Iyer, Solutions for contact in pinned connections, International Journal of Solids and Structures 38 (2001) 9133-9148.
78. T.L. Paez, L.J. Branstetter, D.L. Gregory, 1985, Modal randomness induced by boundary conditions, Society of Automotive Engineering Technical Paper 851930, 1985.
79. T. Watanabe, Forced vibration of continuous system with non-linear boundary conditions, American Society of Mechanical Engineers, Journal of Mechanical Design 11 (1978) 487-491.
80. W.K. Lee, M.H. Yeo, Two-mode interaction of a beam with a non-linear boundary condition, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 121 (1999) 84-88.
81. T. Fukuoka, Finite element simulation of tightening process of bolted joint with a tensioner, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 114 (1992) 433-438.
82. T. Fukuoka, Analysis of the tightening process of bolted joint with a tensioner using spring elements, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 116 (1994) 443-448.
83. T. Fukuoka, Analysis of the tightening process of bolted joint with a tensioner: effects of interface stiffness, ASME Proceedings of Reliability, Stress Analysis, and Failure Prevention Issues, DE-Vol. 110, 2000, pp. 119-125.
84. F. Wang, S. Chen, A method to determine the boundary condition of the finite element model of a slender beam using measured modal parameters, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 118 (1996) 474-478.
85. U. Lee, J. Kim, Determination of non-ideal beam boundary conditions: a spectral element approach, American Institute of Aeronautics and Astronautics Journal 38 (2000) 309-316.
86. L.A. Zadeh, Fuzzy sets, Information Control 8 (1965) 338-353.
87. M. Hanss, S. Oexl, L. Gaul, Simulation and analysis of structural joint models with uncertainties, Proceedings of the International Conference on Structural Dynamics Modeling-Test, Analysis, Correlation and Validation, Madeira Island, Portugal, 2002, pp. 165-174.
88. M. Hanss, S. Oexl, L. Gaul, Identification of a bolted-joint model with fuzzy parameters loaded normal to the contact interface, Mechanical Research Communication 29 (2002).
89. M. Hanss, K. Willner, A fuzzy arithmetical approach to the solution of finite element problems with uncertain parameters, Mechanical Research Communication 29 (2000) 257-272.
90. M. Hanss, The transformation method for the simulation and analysis of systems with uncertain parameters, Fuzzy Sets and Systems 90 (2002) 277-289.
91. G. Alefeld, J. Herzberger, Introduction to Interval Computation, Academic Press, New York, 1983.
92. A. Kaufmann, M.M. Gupta, Introduction to Fuzzy Arithmetic: Theory and Applications, Van Nostrand Reinhold Co., New York, 1985.
93. G.J. Klir, T.A. Folger, Fuzzy Sets, Uncertainty, and Information, Prentice-Hall, Englewood Cliffs, NJ, 1988.
94. M. Hanss, A nearly strict fuzzy arithmetic for solving problems with uncertainties, Proceedings of the 19th International Conference of North American Fuzzy Information Processing Society, Atlanta, 2000, pp. 439-443.
95. L. Chen, S.S. Rao, Fuzzy finite-element approach for the vibration analysis of imprecisely-defined systems, Finite Elements in Analysis and Design 27 (1997) 69-83.
96. M. Shinozuka, F. Yamazaki, Stochastic finite element analysis: an introduction, in: S.T. Ariaratnam, G.I. Schueller, I. Elishakoff (Eds.), Stochastic Structural Dynamics, Elsevier, London, 1988, pp. 241-291 (Chapter 14).
97. R. Ghanem, J.R. Red-Horse, Modal properties of a space-frame with localized system uncertainties, Proceedings of the Eighth ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, PMC2000-269, 2000, pp. 1-6.
98. S. Valliappan, T. Pham, Fuzzy finite element analysis of a foundation on an elastic soil medium, International Journal of Numerical Analysis Methods and Geomechanics 17 (1993) 771-789.
99. S. Valliappan, T. Pham, Elasto-plastic finite element analysis with fuzzy parameters, International Journal of Numerical Analysis Methods and Geomechanics 34 (1995) 531-548.
100. S.S. Rao, J.P. Sawyer, Fuzzy finite element approach for the analysis of imprecisely defined systems, American Institute of Aeronautics and Astronautics Journal 33 (1995) 2364-2370.
101. M. Hanss, K. Willner, S. Guidati, On applying fuzzy arithmetic to finite element problems, Proceedings of the 17th International Conference of North American Fuzzy Information Processing Society-NAFIPAS'98, Pensacola Beach, FL, 1998, pp. 365-369.
102. M. Hanss, K. Willner, On using fuzzy arithmetic to solve problems with uncertain model parameters, Proceedings of Euromechanics 405 Colloquium, Valenciennes, France, 1999, pp. 85-92.
103. S. McWilliam, Anti-optimization of uncertain structures using interval analysis, Computers and Structures 79 (2001) 421-430.
104. T.M. Wasfy, A.K. Noor, Finite element analysis of flexible multibody systems with fuzzy parameters, Computational Methods in Applied Mechanical Engineering 160 (1998) 223-243.
105. T.M. Wasfy, A.K. Noor, Application of fuzzy sets to transient analysis of space structures, Finite Elements in Analysis and Design 29 (1998) 153-171.
106. H. Shimizu, C. Hiroaki, Automatic FE mesh generation method for surface models, Nippon Kikai Gakkai Ronbunshu (Japan), Part A 59 (565) (1993) 2204-2211.
107. B. Lallemand, A. Cherki, P. Level, Fuzzy modal finite element analysis of structures with imprecise material properties, Journal of Sound and Vibration 220 (1999) 353-364.
108. G. Plessis, B. Lallemand, T. Tison, P. Level, Fuzzy modal parameters, Journal of Sound and Vibration 233 (2000) 797-812.
109. A. Cherki, T. Son, T.M. Guerra, P. Level, On evaluating structures sensitivities to prescribed displacements uncertainties using fuzzy numbers, Engineering Computations (1997) 529-541.
110. A. Cherki, G. Plessis, B. Lallemand, T. Tison, P. Level, Fuzzy behavior of mechanical systems with uncertain boundary conditions, Computational Methods in Applied Mechanical Engineering 189 (2000) 863-873.
111. K. Handa, K. Andersson, Application of finite element methods in the statistical analysis of structures, Proceedings of the Third International Conference of Structural Safety and Reliability, 1981, pp. 409-417.
112. J.H. Wang, C.M. Liou, Identification parameters of structural joints by use of noise-contaminated FRFs, Journal of Sound and Vibration 142 (1990) 261-277.
113. Z. Yue, W. Guangyuan, S. Fen, The general theory for response analysis of fuzzy stochastic dynamic systems, Fuzzy Sets and Systems 83 (1996) 369-405.
114. G. Cristea, Fuzzy dynamic analysis of single degree of freedom nonlinear systems, Computers and Structures 63 (1997) 1101-1111.
115. K. Pansen, Y. Junui, Fuzzy dynamic response analysis of machine tool structure, International Journal of Machine Tools Manufacturing 39 (1999) 1993-2002.
116. N.J. Lindsley, P.S. Beran, C.L. Pettit, Effects of uncertainty on nonlinear plate response in supersonic flow, Ninth AIAA Symposium of Multidisciplinary Analysis and Optimization, Atlanta, GA, Paper 2002-5600, 2002.
117. N.J. Lindsley, P.S. Beran, C.L. Pettit, Effects of uncertainty on nonlinear plate aeroelastic response, 43rd AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, Paper No. AIAA 2002-1271, 2002.
118. W. Eccles, Bolted joint design, Engineering Design 10 (1984) 10-14.
119. R.R. Schmitt, W.J. Horn, Viscoelastic relaxation in bolted thermoplastic composite joints, Proceedings of SAMPE Symposium and Exhibits, Vol. 35, 1990, pp. 1336-1347.
120. W.J. Horn, R.R. Schmitt, Relaxation in bolted thermoplastic composite joints, AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, Part 1, 1993, pp. 485-494.
121. Bolt Science, 1999-02, Vibration loosening of bolts and threaded fasteners, www.boltscience.com/pages/vibloose.
122. V.H. Yost, Random Vibration and Torque Tests of Fasteners Secured with Cable, Room Temperature Vulcanized (RTV) Rubber, and Closed Cell Foam to Support the Launch of STS-82, National Aeronautics and Space Administration NASA Technical Memorandum 108539, 1997.
123. A. Daadbin, Y.M. Chow, Theoretical models to study thread loosening, Mechanics and Machine Theory 27 (1992) 69-74.
124. G.H. Junker, New criteria for self-loosening of fasteners under vibrations, Society of Automotive Engineering SAE Paper 690055, 1969, pp. 314-335.
125. T. Sakai, The friction coefficient of fasteners, Bulletin of Japanese Society of Mechanical Engineering 21 (1978) 333-340.
126. T. Sakai, T., Bolt loosening mechanisms, first report: bolts of transversely loaded joints, and second report: center bolts of twisted joints, Bulletin of Japanese Society of Mechanical Engineering 21 (1978) 1385-1394.
127. T. Sakai, Investigation of bolt loosening mechanisms, third report: bolts tightened over their yield point, Bulletin of Japanese Society of Mechanical Engineering 22 (1979) 412-419.
128. A. Yamamoto, S. Kasei, A solution for self-loosening mechanism of threaded fasteners under transverse vibration, Bulletin of Japanese Society of Precession Engineering 18 (1984) 261-266.
129. O. Vinogradov, X. Huang, On a high frequency mechanism of self-loosening of fasteners, Proceedings of the 12th ASME Conference of Mechanical Vibration and Noise, Montreal, Quebec, 1989, pp. 137-145.
130. D.P. Hess, Vibration- and shock-induced loosening, in: Handbook of Bolts and Bolted Joints, Mercer Dekker, New York, 1998 (Chapter 460).
131. R.I. Zadoks, X. Yu, A preliminary study of self-loosening in bolted connections, ASME Proceedings of the 14th Conference of Mechanical Vibration and Noise, 1993, pp. 79-88.
132. R.I. Zadoks, X. Yu, An investigation of the self-loosening behavior of bolts under transverse vibration, Journal of Sound and Vibration 208 (1997) 189-209.
133. J.N. Goodier, R.J. Sweeney, Loosening by vibration of threaded fastenings, Mechanical Engineering 67 (1945) 794-800.
134. S. Harnchoowong, Loosening of Threaded Fastenings by Vibration, Ph.D. Dissertation, University of Wisconsin-Madison, 1985.
135. S.K. Clark, J.J. Cook, Vibratory loosening of bolts, Society of Automotive Engineering Paper No. 660432, 1966, pp. 1-10.
136. S.C. Gambrell, Why bolts loosen? Machine Design 40 (1968) 163-167.
137. R.J. Finkelston, How much shake can bolted joints take? Machine Design 44 (1972) 122-125.
138. R.A. Walker, The Factors Which Influence the Vibration Resistance of Fasteners, Standard Pressed Steel Co., Jenkintown, PA, 1973.
139. J.J. Kerley, Dynamic and Static Testing of Kaynar Spiralock Microdot Nuts, National Aeronautics and Space Administration (NASA), Goddard Space Flight Center, Engineering Services Division, Greenbelt, MA, 1984.
140. J.J. Kerley, An Application of Retroduction to Analyzing and Testing the Backing off of Nuts and Bolts During Dynamic Loading, National Aeronautics and Space Administration (NASA), Technical Memorandum 4001, Goddard Space Flight Center, Greenbelt, MA, 1987.
141. G.E. Ramey, R.C. Jenkins, Experimental analysis of thread movement in bolted connections due to vibrations, Final Report NAS8-39131, Marshall Space Flight Center, AL, 1995.
142. D.P. Hess, K. Davis, Threaded components under axial harmonic vibration, part 1: experiments, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 118 (1996) 417-422.
143. D.P. Hess, Threaded components under axial harmonic vibration, part 2: kinematic analysis, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 118 (1996) 423-429.
144. M. Leonavicius, A. Krenevicius, Shakedown and failure of the threaded joints under low cyclic loading, Journal of Construction Steel Research 46 (1998) 452-453.
145. A.K. Graham, D.P. Hess, H.M. Stephens, Screw Loosening in an In Vitro Mid Fibular Osteotomy Model Under Dynamic Loading Conditions, Foot and Ankle Institute, American Orthopedic Foot and Ankle Society, 2000, pp. 849-851.
146. D.P. Hess, S.V. Sudhirkashyap, Dynamic analysis of threaded fasteners subjected to axial vibration, Journal of Sound and Vibration 193 (1996) 1079-1090.
147. D.P. Hess, S.V. Sudhirkashyap, Dynamic loosening and tightening of a single-bolt assembly, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 119 (1997) 311-316.
148. S. Basava, D.P. Hess, Bolted joint clamping force vibration due to axial vibration, Journal of Sound and Vibration 210 (1998) 255-265.
149. N.G. Pai, D.P. Hess, Experimental study of loosening of threaded fasteners due to dynamic shear loads, Journal of Sound and Vibration 253 (2002) 585-602.
150. N.G. Pai, D.P. Hess, Three-dimensional finite element analysis of threaded fastener loosening due to dynamic shear load, Engineering Failure Analysis 9 (2002) 384-402.
151. S. Kasai, M. Ishimura, N. Ohashi, On self-loosening of threaded joints in the case of absence of macroscopic bearing-surface sliding, Bulletin of Japanese Society of Precision Engineering 23 (1989) 31-36.
152. Y. Jiang, B. Huang, H. Zhao, C.W. Lee, A study of early stage self-loosening of bolted joints, ASME IMEC 2001 Threaded and Riveted Connections, Design Issues, Reliability, Stress Analysis, and Failure Prevention, DE-Vol. 114, 2001, pp. 1-10.
153. K. Koga, Loosening by repeated impact of threaded fastenings, Bulletin of Japanese Society of Mechanical Engineering 13 (1970) 140-149.
154. K. Koga, H. Isono, Study on self-loosening of bolted joints taking account of characteristics of impulsive friction, Bulletin Japanese Society of Mechanical Engineering 29 (1986) 1004-1012.
155. S. Kasai, H. Matsuoka, Consideration of thread loosening by transverse impacts, American Society of Mechanical Engineers, Pressure Vessels and Piping Division PVP 367 (1998) 117-123.
156. S. Qiao, V.N. Pilipchuk, R.A. Ibrahim, Modeling and simulation of elastic structures with parameter uncertainties and relaxation of joints, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 123 (2000) 45-52.
157. M. Shinozuka, C.J. Astill, Random eigenvalue problems in structural analysis, American Institute of Aeronautics and Astronautics Journal 10 (1972) 456-462.
158. J.M. Klosner, S.F. Haber, P. Voltz, Response of non-linear systems with parameter uncertainties, International Journal of Non-linear Mechanics 27 (1992) 547-563.
159. R.A. Ibrahim, D.M. Beloiu, C.L. Pettit, Influence of boundary conditions relaxation on panel flutter, in press, IUTAM Symposium on Chaotic Dynamics and Control Systems and Processes in Mechanics, Rome, Italy, June, 2003, in press.
160. R.A. Ibrahim, P.O. Orono, S.R. Madaboosi, Stochastic flutter of a panel subjected to random in-plane forces part 1: Two mode interaction, American Institute of Aeronautics and Astronautics Journal 28 (1990) 694-702.
161. Y. Ito, M. Masuko, Study on the horizontal bending stiffness of a bolted joint, Bulletin of Japanese Society of Mechanical Engineering 14 (1971) 889-976.
162. Y. Ito, A contribution to the effective range of the preload on a bolted joint, Proceedings of the 14th International Machine Tool Design and Research Conference, 1974, pp. 503-507.
163. T.R. Kim, X.M. Wu, K.F. Eman, Identification of the joint parameters for a taper joint, American Society of Mechanical Engineers, Journal of Engineering for Industry 111 (1989) 282-287.
164. R. Ikegami, S.M. Church, D.A. Keinholz, B.L. Fowler, Experimental characterization of deployable trusses and joints, Workshop on Structure Control and Interaction Flexible Structures, Marshall Space Flight Center, Huntsville, AL, 1986.
165. J.M. Chapman, F.H. Shaw, W.C. Russell, Dynamics of trusses having nonlinear joints, Workshop on Structure Control of Flexible Structures, Marshall Space Flight Center, Huntsville, AL, 1986.
166. K.L. O'Donnell, E.F. Crawley, Identification of nonlinear parameters in space structure joints using the force-state mapping technique, Space Systems Laboratory, Massachusetts Institute of Technology, Cambridge, Report 16-85, 1985.
167. E.F. Crawley, K.J. O'Donnell, Force-state mapping identification of nonlinear joints, American Institute of Aeronautics and Astronautics Journal 25 (1987) 1003-1010.
168. J.D. Collins, G.C. Hart, T.K. Hasselman, B. Kennedy, B., Statistical identification of structures, American Institute of Aeronautics and Astronautics Journal 12 (1974) 185-190.
169. M.I. Friswell, J.E. Penny, Updating model parameters from frequency domain data via reduced order models, Mechanical Systems and Signal Processing 4 (1990) 377-391.
170. W.J. Visser, M. Imregun, A technique to update finite element models using frequency response data, Proceedings of the Ninth International Modal Analysis Conference, 1991, pp. 462-468.
171. M. Yoshimure, Measurement of dynamic rigidity and damping property of simplified joint models and simulation by computer, Annals CIRP 25 (1977) 193-198.
172. M. Yoshimure, Computer design improvement of machine tool structure incorporation joint dynamics data, Annals CIRP 28 (1980) 241-246.
173. M.R. Good, D.J. Marioce, Using experimental modal analysis to characterize automobile body joints and improve finite element analysis, Proceedings of the Seventh International Modal Analysis Conference, Las Vegas, NV, 1989, pp. 106-110.
174. A.S. Nobari, D.A. Robb, D.J. Ewins, A new modal-based method for structural dynamic model updating and joint identification, Proceedings of the 10th International Modal Analysis Conference, Vol. 1, San Diego, 1992, pp. 741-750.
175. T. Inamura, T. Sata, Stiffness and damping properties of the elements of a machine tool structure, Annals of the CIRP 28 (1979) 235-239.
176. J.X. Yuan, X.M. Wu, Identification of the joint structural parameters of machine tool by DDS and FEM, American Society of Mechanical Engineers, Journal of Engineering for Industry 107 (1985) 64-69.
177. J.S. Tsai, Y.F. Chou, The identification of dynamic characteristics of a single bolt joint, Journal of Sound and Vibration 125 (1988) 487-502.
178. J.H. Wang, P. Sas, A new method for identifying parameters of mechanical joints, American Society of Mechanical Engineers, Journal of Applied Mechanics 57 (1990) 337-342.
179. Y. Ren, C.F. Beards, Identification of joint properties using FRF data, Florence Modal Analysis Conference, Italy, 1991, pp. 663-669.
180. J.E. Mottershead, R. Stanway, Identification of structural vibration parameters by using a frequency domain filter, Journal of Sound and Vibration 109 (1986) 495-506.
181. S.W. Hong, C.W. Lee, Identification of linearized joint structural parameters by combined use of measured and computed frequency responses, Mechanical Systems and Signal Processing 5 (1991) 267-277.
182. J.H. Wang, C.M. Liou, Experimental identification of mechanical joint parameters, Journal of Sound and Vibration 143 (1991) 28-36.
183. K.T. Yang, Y.S. Park, Joint structural parameter identification using a subset of frequency response function measurement, Mechanical Systems and Signal Processing 1 (1993) 509-530.
184. J.R.F. Arruda, J.M.C. Santos, Model adjusting of structures with mechanical joints using modal synthesis, Proceedings of the Seventh International Modal Analysis Conference, Las Vegas, NV, 1989, pp. 850-856.
185. J.R.F. Arruda, J.M.C. Santos, Mechanical joint parameter estimation using frequency response functions and component mode synthesis, Mechanical Systems and Signal Processing 1 (1993) 493-508.
186. J.H. Wang, C.M. Liou, Experimental substructure synthesis with special consideration of joint effect, International Journal of Analytical and Experimental Modal Analysis 5 (1989) 1012.
187. H.Y. Hwang, Identification techniques of structure connection parameters using frequency response functions, Journal of Sound and Vibration 212 (1998) 469-479.
188. Y. Ren, C.F. Beards, Identification of 'effective' linear joints using coupling and joint identification techniques, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 120 (1998) 331-338.
189. U. Pabst, P. Hagedorn, Identification of boundary conditions as a part of model correction, Journal of Sound and Vibration 182 (1995) 565-575.
190. J.E. Mottershead, M.I. Friswell, G.H.T. Ng, J.A. Brandon, Geometric
191. J.E. Mottershead, W.X. Shao, Correction of joint stiffnesses and constraints for finite element models in structural dynamics, American Society of Mechanical Engineers, Journal of Applied Mechanics 60 (1993) 117-122.
192. W.L. Li, A new method for structural model updating and joint stiffness identification, Mechanical Systems and Signal Processing 16 (2002) 155-167.
193. H. Ahmadian, J.E. Mottershead, M.I. Fiswell, Joint modeling for finite element model updating, Proceedings of the 14th International Modal Analysis Conference, Vol. 1, Dearborn, MI, 1996, pp. 591-596.
194. U. Edlund, Mechanical Analysis of Adhesive Joints: Models and Computational Methods, Ph.D. Thesis, Linköping Institute of Technology, Sweden, 1992.
195. J. Bonini, et al., Numerical modeling of contact for low velocity impact damage in composite laminates in: M.H. Aliabadi, et al. (Eds.), Contact Mechanics, CMP, 1993, pp. 453-461.
196. M.R. Bahaari, A.N. Sherbourne 1994, Computer modeling of an extended end-plate bolted connection, Computers and Structures 52 (1994) 879-893.
197. M. Burdekin, N. Back, A. Cowley, Analysis of the local deformations in machine joints, Journal of Mechanical Engineering Science 21 (1979) 25-32.
198. M. Burdekin, N. Back, A. Cowley, A., Experimental study of normal and shear characteristics of mechanical surfaces in contact, Journal of Mechanical Engineering Science 20 (1978) 129-132.
199. A.A. Huckelbridge, C. Lawrence, Identification of structural interface characteristics using component mode synthesis, ASME Journal of Vibration, Acoustics, Stress, and Reliability Design 111 (1989) 140-147.
200. A.A. Huckelbridge, C. Lawrence, Characterization of structural connection using free and forced response test data, ASME 12th Biennial Conference of Mechanical Vibration and Noise, Montreal, Quebec, 1989.
201. Y. Ren, C.F. Beards, On the importance of weighting on FRF joint identification, Proceedings of the 11th International Modal Analysis Conference, FL, 1993, pp. 1606-1611.
202. Y. Ren, C.F. Beards, 1993b, On the nature of FRF joint identification techniques, Proceedings of the 11th International Modal Analysis Conference, FL, 1993, pp. 473-478.
203. Y. Ren, C.F. Beards, An iterative FRF joint identification technique, Proceedings of the 11th International Modal Analysis Conference, FL, 1993, pp. 1133-1139.
204. R.E.D. Bishop, The analysis and synthesis of vibrating systems, Journal of the Royal Aeronautical Society 58 (1954) 703-719.
205. Y. Ren, C.F. Beards, A new multi-step two coordinate coupling technique and its application for detecting linearly-dependent coordinates, Proceedings of the 11th International Modal Analysis Conference, FL, 1993, pp. 872-876.
206. Y. Ren, C.F. Beards, A new receptance-based perturbative multi-harmonic balance method for the calculation of the steady-state response of nonlinear systems, Journal of Sound and Vibration 172 (1994) 593-604.
207. M. Imregun, D.A. Robb, D.J. Ewins, 1987, Structural modification and coupling dynamic analysis using measured FRF data, Proceedings of the Fifth International Modal Analysis Conference, London, 1987, pp. 1136-1141.
208. M.J. Ratcliffe, N.A.J. Lieven, A generic element-based method for joint identification, Mechanical Systems and Signal Processing 14 (2000) 3-28.
209. F.C. Moon, G.X. Li, Experimental study of chaotic vibration in a pin-jointed space truss structure, American Institute of Aeronautics and Astronautics Journal 28 (1990) 915-921.
210. H.J. Klepp, 1994, The existence and uniqueness of solutions for the pendulum with friction, Journal of Sound and Vibration 175 (1994) 138-143.
211. H.J. Klepp, The existence and uniqueness of solutions for a single-degree-of-freedom system with two friction-affected sliding joints, Journal of Sound and Vibration 185 (1995) 364-371.
212. H.J. Klepp, Trial-and-error procedure for single-degree-of-freedom systems with friction-affected sliding joints, Journal of Sound and Vibration 191 (1996) 598-605.
213. M.L. Tinker, Nonlinearities due to joint friction and clearance in a structural dynamic test fixture, in: A.A. Ferri, G.T. Flower, S.C. Sinha (Eds.), ASME Proceedings of the Symposium on Elasto-Impact and Friction in Dynamic Systems, DE-Vol. 90, 1996, pp. 35-46.
214. K.C. Ho, K.T. Chau, 1997, An infinite plane loaded by a rivet of a different material, International Journal of Solids and Structures 34 (1997) 2477-2496.
215. C.P. Chasten, et al., Prying and shear in end-plate connection design, American Society of Civil Engineers, Journal of Structure Engineering 118 (1992) 77-89.
216. S. Groves, et al., Evaluation of shear joints for composite material, Journal of Composite Material 26 (1992) 1134-1150.
217. N. Gebbeken, et al., Numerical analysis of endplate connections, Journal of Construction Steel Research 30 (1994) 177-196.
218. S.F. Masri, T.K. Caughey, A nonparametric identification technique for nonlinear dynamic problems, American Society of Mechanical Engineers, Journal of Applied Mechanics 46 (1979) 433-447.
219. S.F. Masri, H. Sassi, T.K. Caughey, Nonparametric identification of nearly arbitrary nonlinear systems, American Society of Mechanical Engineers, Journal of Applied Mechanics 49 (1982) 619-628.
220. S.F. Masri, R.K. Miller, A.F. Saud, T.K. Caughey, Identification of nonlinear vibrating structures, part I: Formulation, American Society of Mechanical Engineers, Journal of Applied Mechanics 54 (1987) 918-922.
221. S.F. Masri, R.K. Miller, A.F. Saud, T.K. Caughey, Identification of nonlinear vibrating structures, part II: Application, American Society of Mechanical Engineers, Journal of Applied Mechanics 54 (1987) 923-929.
222. M.A. Al-Hadid, J.R. Wright, 1989, Developments in the force-state mapping technique for nonlinear systems and the extension to the location of nonlinear elements in a lumped-parameter system, Mechanical Systems and Signal Processing 3 (1989) 269-290.
223. M.L. Soni, B.N. Agrawal, Damping synthesis for flexible space structures using combined experimental and analytical models, AIAA Paper 85-0779, April 1985.
224. E.F. Crawley, A.C. Aubert, Identification of nonlinear structural elements by force-state mapping, American Institute of Aeronautics and Astronautics Journal 24 (1986) 155-162.
225. W.J. Kim, Y.S. Park, Nonlinear joint parameter identification by applying the force-state mapping technique in the frequency domain, Mechanical Systems and Signal Processing 8 (1994) 519-529.
226. S.S. Lee, Y.S. Park, Position of nonlinear elements and identification of their type by a local nonparametric method, Mechanical Systems and Signal Processing 5 (1991) 403-420.
227. H.S. Tzou, Nonlinear joint dynamics and controls of jointed flexible structures with active and viscoelastic joint actuators, Journal of Sound and Vibration 143 (1990) 407-422.
228. D.P. Hess, N.J. Wagh, 1992, Chaotic vibrations and friction at mechanical joints, in: R.A. Ibrahim, A. Soom (Eds.), Proceedings of the ASME Symposium on Friction-Induced Vibration, Chatter, Squeal and Chaos, DE-Vol-49, 1992, pp. 149-156.
229. A.A. Ferri, B. Heck, Analytical investigation of damping enhancement using active and passive structural joints, Journal of Guidance and Control Dynamics 15 (1992) 1258-1264.
230. L. Gaul, J. Lenz, D. Sachau, Active damping of space structures by contact pressure control in joints, Mechanical Structures and Machines 26 (1998) 81-100.
231. L. Gaul, R. Nitsche, Friction control for vibration suppression, Mechanical Systems and Signal Processing 14 (2000) 139-150.
232. T.M. Cameron, J.H. Griffin, An alternating frequency/time domain method for calculating the steady-state response of nonlinear dynamic systems, American Society of Mechanical Engineers, Journal of Applied Mechanics 56 (1989) 149-154.
233. Y. Ren, T.M. Lim, M.K. Lim, Identification of properties of nonlinear joints using dynamic test data, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 120 (1998) 324-330.
234. X. Ma, L. Bergman, A. Vakakis, Identification of bolted joints through laser vibrometry, Journal of Sound and Vibration 246 (2001) 441-460.
235. L. Gaul, S. Bohlen, Identification of nonlinear structural joint models and implementation in discretized structure models, ASME Proceedings of the 11th Conference of Mechanical Vibration and Noise, DE-Vol. 5, 1987a, pp. 213-219.
236. L. Gaul, S. Bohlen, Vibration of structures coupled by nonlinear transfer behavior of joints; a combined computational and experimental approach, Proceedings of the Fifth International Modal Analysis Conference, London, 1987b, pp. 86-91.
237. L. Gaul, U. Nackenhorst, K. Willner, J. Lenz, Nonlinear vibration damping of structures with bolted joints, Proceedings of the 12th International Modal Analysis Conference, 1994, pp. 875-881.
238. J. Lenz, L. Gaul, The influence of microslip on the dynamic behavior of bolted joints, Proceedings of the 13th International Modal Analysis Conference, Nashville, TE, 1995.
239. L. Gaul, J. Lenz, Nonlinear dynamics of structures assembled by bolted joints, Acta Mechanica 125 (1997) 169-181.
240. S.W. Jones, P.A. Kirby, D.A. Nethercot, The analysis of frame with semi-rigid connections - a state-of-the-art report, Journal of Construction Steel Research 3 (1983) 2-13.
241. W.M. Wilson, H.F. Moore, Test to determine the rigidity of riveted joints in steel structures, Bulletin 104, Urbana Illinois, Engineering Experiment Station, 1917.
242. B. Sourochnikoff, Wind stresses in semi-rigid connections of steel framework, American Society of Civil Engineers, Transactions 115 (1950) 382-393.
243. G.R. Monforton, T.S. Wu, Matrix analysis of semi-rigidly connected steel frames, American Society of Civil Engineers, Journal of Structure Division 90 (1963) 13-42.
244. C.H. Yu, N.B. Shanmugam, Stability of frames with semi-rigid joints, Computers and Structures 23 (1986) 639-648.
245. M.J. Frye, G.A. Morris, Analysis of flexible connected steel frames, Canadian Journal of Civil Engineering 2 (1975) 280-291.
246. K.M. Ang, G.A. Morris, Analysis of three-dimensional frame with flexible beam-column connection, Canadian Journal of Civil Engineering 11 (1984) 241-254.
247. B.S. Dhillon, S. Abdel-Majid, Interactive analysis and design of flexibility connected frames, Computers and Structures 36 (1990) 189-202.
248. W.F. Chen, Y. Goto, J.Y.R. Liew, Stability Design of Semi-rigid Frames, Wiley, New York, 1996.
249. R. Bjorhovde, A. Colson, J. Brozzetti, Classification system for beam-to-column connections, American Society of Civil Engineers, Journal of Structure Division 116 (1990) 3059-3076.
250. E.M. Lui, W.F. Chen, Analysis and behavior of flexibly-jointed frames, Engineering Structures 8 (1986) 107-118.
251. R. Cunningham, Some aspects of semi-rigid connections in structural steel work, Structure Engineering 68 (1990) 88-92.
252. S.L. Chan, G.W.M. Ho, Nonlinear vibration analysis of steel frames with semi-rigid connections, International Journal of Numerical Methods 28 (1991) 2635-2650.
253. W.F. Chen, E.M. Lui, Stability Design of Steel Frames, CRC Press, Boca Raton, FL, 1991.
254. K.M. Romstad, C.V. Subramanian, Analysis of frames with partial connection rigidity, American Society of Civil Engineers, Journal of Structures Division 96 (1970) 2283-2300.
255. C.W. Wong, W.H, Mak, J.M. Ko, System and parametric identification of flexible connections in steel framed structures, Engineering Structures 17 (1995) 581-595.
256. F.C. Rodrigues, A.C. Saldanha, M.S. Pfeil, Nonlinear analysis of steel plane frames with semi-rigid connections, Journal of Construction Steel Research 46 (1998) 94-97.
257. P.D. Moncarz, K.H. Gerstle, Steel frames with nonlinear connections, American Society of Civil Engineers, Journal of Structure Division 107 (1981) 1427-1441.
258. K.S. Sivakumaran, Seismic response of multi-story steel buildings with flexible connects, Engineering Structures 10 (1988) 239-248.
259. F.G.A. Al-Bermani, S. Kitiponchai, Elasto-plastic nonlinear analysis of flexibly jointed space frame, American Society of Civil Engineers, Journal of Structural Engineering 118 (1992) 108-127.
260. F.G.A. Al-Bermani, B. Li, K. Zhu, S. Kitiponchai, Cyclic and seismic response of flexibility jointed frames, Engineering Structures 16 (1994) 249-255.
261. K.C. Tsai, S. Wu, E.P. Popov, Cyclic performance of steel beam-column moment joints, Engineering Structures 17 (1995) 596-602.
262. S.L. Chan, P.P.J. Chui, Nonlinear Static and Cyclic Steel Frames with Semi-Rigid Connections, Elsevier, London, 2000.
263. W.F. Chen, E.M. Lui, Analysis and behavior of flexibly-jointed frames, Engineering Structures 8 (1986) 107-118.
264. W.F. Chen, E.M. Lui, Effects of joint flexibility on the behavior of steel frames, Computers and Structures 26 (1987) 719-732.
265. P. Pui, T. Chui, L.C. Siu, Vibration and deflection characteristics of semi-rigid jointed frames, Engineering Structures 19 (1997) 1001-1010.
266. J.Y. Liew, W.F. Richard, D.W. Chen, Limit states design of semi-rigid frames using advanced analysis, Part 1: connection modeling and classification, Journal of Construction Steel Research 26 (1993) 1-27.
267. J.Y. Liew, W.F. Richard, D.W. Chen, Limit states design of semi-rigid frames using advanced analysis, Part 2: analysis and design, Journal of Construction Steel Research 26 (1993) 29-57.
268. M. Sekulovic, R. Salatic, Nonlinear analysis of frames with flexible connections, Computers and Structures 79 (2001) 1097-1107.
269. R.T. Leon, Semi-rigid composite construction, Composite Construction Steel and Concrete 15 (1990) 585-597.
270. R.T. Leon, Composite semi-rigid construction, Engineering Journal 31 (1994) 57-66.
271. R.T. Leon, J.J. Hoffman, T. Staeger, Partially restrained composite connections, Steel Design Guide Series 8, AISC, Chicago, IL, 1996.
272. T.Q. Li, B.S. Choo, D.A. Nethercot, Determination of rotation capacity requirements for steel and composite beams, Journal of Construction Steel Research 32 (1995) 303-332.
273. T.Q. Li, D.A. Nethercot, B.S. Choo, Behavior of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios - II: prediction of moment capacity, Journal of Construction Steel Research 38 (1996) 165-198.
274. D.A. Nethercot, T.Q. Li, B.S. Choo, Required rotations and moment redistribution of composite and continuous, Journal of Construction Steel Research 35 (1995) 121-163.
275. T.Q. Li, D.A. Nethercot, B.S. Choo, Behavior of flush end-plate composite connections with unbalanced moment and variable shear/moment ratios - I: experimental behavior, Journal of Construction Steel Research 38 (1996) 125-164.
276. T.Q. Li, D.B. Moore, D.A. Nethercot, B.S. Choo, The experimental behavior of a full-scale, semi-rigidly connected composite frame: detailed appraisal, Journal of Construction Steel Research 38 (1996) 193-220.
277. D.A. Nethercot, Semi-rigid joint action and the design of non-sway composite frames, Engineering Structures 17 (1995) 554-567.
278. A. Haldar, Y. Zhou, Reliability of geometrically nonlinear PR frames, American Society of Civil Engineers, Journal of Engineering Mechanics 118 (1992) 2148-2155.
279. Y. Goto, W.F. Chen, On the computer-based design analysis for the flexibility of jointed frames, Journal of Construction Steel Research 8 (1987) 203-231.
280. E.M. Lui, W.F. Chen, Steel frame analysis with flexible joints, Journal of Construction Steel Research 8 (1987) 893-913.
281. G.W.M. Ho, S.L. Chan, Semi-bifurcation analysis of flexibly connected steel frames, American Society of Civil Engineers, Journal of Structure Engineering 117 (1991) 2299-2319.
282. G.W.M. Ho, S.L. Chan, An accurate and efficient method for large deflection analysis of frames with semi-rigid connections, Journal of Construction and Steel Research 26 (1993) 171-191.
283. L. Xu, D.E. Grierson, Computer automated design of semi-rigid steel frameworks, American Society of Civil Engineers, Journal of Structure Engineering 119 (1993) 1740-1760.
284. B.S. Dhillon, J.W. O'Malley, 1999, Interactive design of semi-rigid steel frames, American Society of Civil Engineers, Journal of Structure Engineering 125 (1999) 556-564.
285. I. Yaghmai, D.A. Frohrib, A sensitive analysis of the effects of interconnection joint size, flexibility, and inertia on the natural frequencies of Timoshenko frames, Journal of Sound and Vibration 75 (1981) 329-346.
286. J.H. Oh, Y.G. Kim, D.G. Lee, Optimum bolted joints for hybrid composite materials, Composite Structures 38 (1997) 329-341.
287. S. Lionberger, W. Weaver, Dynamic response of frames with non-rigid connections, American Society of Civil Engineers, Journal of Engineering Mechanics Division 95 (1969) 95-114.
288. S. Kawashima, T. Fujimoto, Vibration analysis of frames with semi-rigid connections, Computers and Structures 1 (1984) 85-92.
289. S.L. Chan, Vibration and modal analysis of steel frames with semi-rigid connections, Engineering Structures 16 (1994) 25-31.
290. R. Masika, L. Dunai, Behavior of bolted end-plate portal frame joints, Journal of Construction Steel Research 32 (1995) 207-225.
291. L.E. Suarez, M.P. Singh, E.E. Matheu, Seismic response of structural frameworks with flexible connects, Computers and Structures 58 (1996) 27-41.
292. E.M. Lui, A. Lopes, Dynamic analysis and response of semirigid frames, Engineering Structures 19 (1997) 644-654.
293. S.Y. Hsu, A. Fafitis, 1992, Seismic analysis design of frames with viscoelastic connections, American Society of Civil Engineers, Journal of Structure Division 118 (1992) 2459-2474.
294. Y.L. Xu, W.S. Zhang, Modal analysis and seismic response of steel frames with connection dampers, Engineering Structures 23 (2001) 385-396.
295. G. Shi, S.N. Atluri, Static and dynamic analysis of space frames with nonlinear flexible connections, International Journal of Numerical Methods in Engineering 28 (1989) 2635-2650.
296. L. Gao, A. Haldar, Nonlinear seismic analysis of space structures with partially restrained connections, Microcomputers in Civil Engineering 10 (1995) 27-37.
297. A. Reyes-Salzar, A. Haldar, Non-linear seismic response of steel structures with semi-rigid and composite connections, Journal of Construction Steel Research 51 (1999) 37-59.
298. P.M. Frank, Introduction to System Sensitivity Theory, Academic Press, New York, 1978.
299. R.L. Fox, M.P. Kapoor, Rates of change of eigenvalues and eigenvectors, American Institute of Aeronautics and Astronautics Journal 6 (1968) 2426-2429.
300. L.A. Kiefling, Comment on The eigenvalue problem for structural systems with statistical properties', American Institute of Aeronautics and Astronautics Journal 8 (1970) 1371-1372.
301. A.G. Nalecz, J. Wicher, 1988, Design sensitivity analysis of mechanical systems in frequency domain, Journal of Sound and Vibration 120 (1988) 517.
302. R.S. Sharp, P.C. Brooks, Sensitivities on frequency response function of linear dynamic systems to variations in design parameter values, Journal of Sound and Vibration 126 (1988) 167.
303. L.C. Rogers, Derivatives of eigenvalues and eigenvectors, American Institute of Aeronautics and Astronautics Journal 8 (1970) 943-944.
304. R.H. Plaut, K. Huseyin, Derivatives of eigenvalues and eigenvectors in non-self-adjoint systems, American Institute of Aeronautics and Astronautics Journal 11 (1973) 250-251.
305. C.S. Rudisill, Derivatives of eigenvalues and eigenvectors for a general matrix, American Institute of Aeronautics and Astronautics Journal 12 (1974) 721-722.
306. C.C. Baniotopolos, K.M. Abdalla, Sensitivity analysis results on the separation problem of bolted steel column-to-column connections, International Journal of Solids and Structures 32 (1995) 251-265.
307. L. Socha, The sensitivity analysis of stochastic nonlinear dynamical systems, Journal of Sound and Vibration 110 (1986) 271-296.
308. G. Juhn, G.D. Manolis, Stochastic sensitivity and uncertainty of secondary systems in base-isolated structures, Journal of Sound and Vibration 159 (1992) 207.
309. T.D. Hien, M. Klieber, Stochastic design sensitivity in structural dynamics, International Journal of Numerical Methods in Engineering 32 (1991) 1247-1265.
310. C.D. Huang, T.T. Soong, Stochastic sensitivity analysis of nonlinear primary-secondary structural systems, Engineering Structures 16 (1994) 91-96.
311. C.D. Huang, L. Socha, T.T. Soong, Stochastic sensitivity analysis of nonlinear primary-secondary structural systems, Engineering Structures 15 (1993) 135-142.
312. A. Der Kiureghian, J.B. Ke, The stochastic finite element method in structural reliability, Probabilistic Engineering Mechanics 3 (1988) 83-91.
313. S. Mahadevan, A. Haldar, Efficient algorithm for stochastic structural optimization, American Society of Civil Engineers, Journal of Structure Division 115 (1989) 1579-1598.
314. P. Cacciola, P. Colajanni, G. Muscolino, Stochastic sensitivity of steel frames with connection dampers by modal analysis, Proceedings of the 20th International Modal Analysis Conference, Vol. 1, 2002, pp. 127-133.
315. S. Benfratello, S. Caddemi, G. Muscolino, Gaussian and non-Gaussian stochastic sensitivity analysis of discrete structural systems, Computers and Structures 78 (2000) 425-434.
316. G. Muscolino, Dynamically modified linear structures: Deterministic and stochastic response, American Society of Civil Engineers, Journal of Engineering Mechanics Division 122 (1996) 1044-1051.
317. R.A. Ibrahim, Parametric Random Vibration, John Wiley, New York, 1985.
318. C. Petersen, Tragfähigkeit imperfektionsbehafteter geschraubter Ringflansch-verbindungen, Stahlbau 59 (1990) 97-104.
319. H. Schmidt, Th.A. Winterstetter, M. Kramer, Nonlinear elastic behavior of imperfect, eccentrically tensioned L-flange ring joints with pre-stressed bolts as basis for fatigue design, CD ROM, Proceedings of European Conference on Computational Mechanics, Munich, Germany, 1999.
320. C. Bucher, M. Ebert, Load carrying behavior of pre-stressed bolted steel flanges considering random geometrical imperfections, Proceedings of the Eighth ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, PMC2000-185, 2000.
321. T. Sawa, T. Morohoshi, A. Shimizu, An analysis of circular bolted flanged joints on solid round bars subjected to external bending moments, ASME Proceedings of Reliability Stress Analysis and Failure Prevention Issues, DE-Vol. 110, 2000, pp. 109-118.
322. H. Zhao, Analysis of the load distribution in a bolt-nut connector, Computers and Structures 53 (1994) 1465-1472.
323. A. Taniguchi, M. Tsutsumi, Y. Ito, A treatment of a contact surface in structural analyses (part 1, an expression for contact stiffness and some numerical results by using its expression), Transactions of the Japanese Society of Mechanical Engineering 49 (1983) 1282-1288.
324. I.R. Grosse, L.D. Mitchell, Nonlinear axial stiffness characteristics of axisymmetric bolted joints, American Society of Mechanical Engineers, Journal of Mechanical Design 112 (1990) 442-449.
325. J. Wileman, M. Choudry, I. Green, Computation of member stiffness in bolted connections, American Society of Mechanical Engineers, Journal of Mechanical Design 113 (1991) 432-437.
326. A. Chaaban, M. Jutras, Static analysis of buttress threads using the finite element method, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 114 (1992) 209-212.
327. A. Chaaban, U. Muzzo, On the design of threaded-end closures for high pressure vessels, American Society of Mechanical Engineers, Pressure Vessel Piping Conference, Denver, PVP263, 1993, pp. 59-65.
328. T.F. Lenhoff, K.I. Ko, M.L. McKay, Member stiffness and contact pressure distribution of bolted joints, American Society of Mechanical Engineers, Journal of Mechanical Design 116 (1994) 550-557.
329. T.F. Lenhoff, W.E. Wistehuff, Nonlinear effects on the stiffness of bolted joints, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 118 (1994) 48-53.
330. T.F. Lenhoff, B.A. Bunyard, Effects of bolt threads on the stiffness of bolted joints, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 123 (2001) 161-165.
331. R.L. Norton, Machine Design: An Integrated Approach, Prentice-Hall, Englewood Cliffs, NJ, 1996.
332. M.B. Karamis, B. Selcuk, Analysis of the friction behavior of bolted joints, Wear 166 (1993) 73-83.
333. E. Niisato, A. Fujii, T. Nakaho, M. Tsuboi, 1997, Effect of surface roughness on fastening performance of bolted joints, Journal of Society of Automotive Engineering Review 18 (1997) 200-212.
334. E. Dragoni, Effect of thread pitch and frictional coefficient on the stress concentration in metric nut-bolt connections, American Society of Mechanical Engineers, Journal of offshore Mechanics and Arctic Engineering 116 (1994) 21-27.
335. T.A. Duffey, Optimal bolt preload for dynamic loading, International Journal of Mechanical Sciences 35 (1993) 257-265.
336. E. Esmailzadeh, M. Chorashi, Optimal design of pre-loaded joints under dynamic loadings, Proceedings of the Eighth International Conference on Pressure Vessel Technology, Vol. 2, 1996, pp. 7-13.
337. E. Esmailzadeh, M. Chorashi, A.R. Ohadi, Analysis of pre-loaded bolted joints under exponential decaying pressure, ASME Journal of Pressure Vessel Technology 118 (1996) 393-398.
338. Y. Dong, D.P. Hess, Optimum placement of bolts in structures based on dynamic shear, Journal of Sound and Vibration 217 (1998) 396-404.
339. Y. Dong, D.P. Hess, Accelerated vibration life tests of thread-locking adhesive, Journal of Aircraft 35 (1998) 816-820.
340. I.A. Rashquinha D.P. Hess, Modeling nonlinear dynamics of bolted assemblies, Applied Mathematics and Modeling 21 (1997) 801-810.
341. P.M. Leon, N.G. Pai, D.P. Hess, The effect of thread dimensional conformance on yield and tensile strength, Engineering Failure Analysis 8 (2001) 49-56.
342. Y. Dong, D.P. Hess, The effect of dimensional conformance on vibration-induced loosening, American Society of Mechanical Engineers, Journal of Vibration and Acoustics 121 (1999) 209-213.
343. B. Lincoln, K.J. Gomes, J.F. Braden, Mechanical Fastening of Plastics, Marcel Dekker, Inc., New York, 1984.
344. G. Verchery (Ed.), Mechanical Behavior of Adhesive. Joints, Pluralis, 1987.
345. J.R. Vinson, Mechanical fastening of polymer composites, Polymer Engineering Science 29 (1989) 1332-1339.
346. D.Y. Hwang, Finite Element Analysis of High Pressure Bolted Flange Connections, Ph.D. Thesis, Auburn University, 1992.
347. N. Rastogi, B.P. Deepak, S.R. Soni, Stress analysis codes for bonded joints in composite structures, Proceedings of the AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, Vol. 4, 1997, pp. 2772-2782.
348. N. Rastogi, M. Xie, S.R. Soni, Strength prediction codes for bolted joints in composite structures, Proceedings of the AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, Vol. 2, 1997, pp. 1088-1098.
349. N. Rastogi, S.R. Soni, A. Nagar, A combined analytical and experimental study of design parameters in composite bonded joints, Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, Part 2, 1998, pp. 1567-1577.
350. M.K. Apalak, R. Davies, 1993, Analysis and design of adhesively bonded corner joints, International Journal of Adhesion and Adhesives 13 (1993) 219-235.
351. R.J. Lee, J.C. McCarthy, An overview of the composite-to-metal jointing project, Advances in Joint Plastics and Composites, Bradford, 1991, pp. 61-70.
352. A.O. Ogunjimi, et al., Thermal stress analysis of conductive adhesive joints, Proceedings of the 14th Japanese International Electronic Manufacturing Technical Symposium, Kanazawa, IEEE, 1993, pp. 349-353.
353. L.E. Bailey, J.C. Roberts, D.L. Jones, Optimal design parameters for thermal and mechanical performance of a metal/composite joint, Proceedings of American Society of Composites, 1995, pp. 428-437.
354. L.E. Bailey, J.C. Roberts, D.L. Jones, Selection of critical thermal/structural design parameters for a metal/composite joint in a composite electronics enclosure, Journal of Thermoplastic Composite Materials 10 (1997) 362-380.
355. J.H. Hermann, R.E. Martin, D.G. Mandic, 1999, Thermoelastic stress analysis of a pultruded composite double lap joint, Proceedings of the SPIE - International Society of Optical Engineering 3585 (1999) 68-70.
356. J.T. Wang, A. Banbury, D.W. Kelly, Evaluation of approaches for determining design allowable for bolted joints in laminated composites, Composite Structures 41 (1998) 167-176.
357. R.D. Adams, V. Mallick, Method for the stress analysis of lap joints, Journal of Adhesion 38 (1992) 199-217.
358. E. Madenci, L. Ileri, Analytical determination of contact stresses in mechanically fastened composite laminates with finite boundaries, International Journal of Solids and Structures 30 (1993) 2469-2484.
359. K. Nono, et al., Stress analysis of asymmetric single lap joints, Japanese Society of Mechanical Engineering, Series A 59 (1993) 646-653.
360. T. Sawa, et al., Elasto-plastic finite element analysis of single-lap adhesive joints subjected to tensile shear loads, Transactions of the Japanese Society of Mechanical Engineering, Series A 59 (1993) 1881-1887.
361. C. Yang, Stress-Strain Analysis of Adhesive-Bonded Composite Single-Lap Joints under Various Loadings, Ph.D. Thesis, Louisiana State University, 1993.
362. O.H. Griffin Jr., M.W. Hyer, D. Cohen, M.J. Shuart, S.R. Yalamanchili, C.B. Prasad, Analysis of multi-fastener composite joints, Journal of Spacecraft and Rockets 31 (1994) 278-284.
363. M. Hildebrand, Nonlinear analysis and optimization of adhesively bonded single lap joints between fiber-reinforced plastics and metals, International Journal of Adhesion and Adhesives 14 (1994) 261-267.
364. J.L. Oakeshott, F.L. Matthews, Determination of fastener load distribution in double lap composite joints, American Society of Mechanical Engineers, Petroleum Division PD-64(2) (1994) 243-251.
365. Z. MeiYing, Y. Ling, W. XiaoPeng, Load distribution in composite multi-fastener joints, Computers and Structures 60 (1996) 337-342.
366. E. Madenci, L. Ileri, J.H. Starnes Jr., Analysis of pin-loaded holes in composite laminates under combined bearing-bypass and shear loading, International Journal of Solids and Structures 32 (1995) 2053-2062.
367. E. Madenci, S. Shkarayev, B. Sergeev, D.W. Oplinger, P. Shyprykevich, Analysis of composite laminates with multiple fasteners, International Journal of Solids and Structures 35 (1998) 1793-1811.
368. M. Elsley, et al., Analysis of highly loaded bonded joints for thin skins, Proceedings of the Fifth Australian Aeronautical Conference, Melbourne, 1993, pp. 96-100.
369. N.S. Prasad, et al., Stress distribution in interference joints, Computers and Structures 51 (1994) 535-540.
370. Z. Prabhakaran, Z. Razzaq, S. Devara, Load and resistance factor design (LRFD) approach for bolted joints in pultruded composites, Composites Part B: Engineering 27 (1995) 351-360.
371. H. Hamada, K. Haruna, Z. Maekawa, Effects of stacking sequences on mechanically fastened joint strength in quasi-isotropic carbon-epoxy laminates, Journal of Composite Technology and Research 17 (1995) 249-259.
372. H. Hamada, Z. Maekawa, K. Haruna, Strength prediction of mechanically fastened quasi-isotropic carbon/epoxy joints, Journal of Composite Material 30 (1996) 1596-1612.
373. T. Ireman, Three-dimensional stress analysis of bolted single-lap composite joints, Composite Structures 43 (1998) 195-216.
374. P.P. Packman, H.J. Hietala, K.C. Schulz, Experimental and statistical analysis of some fastener anomalies on the bolted joint strength of graphite/epoxy laminates, Proceedings of SAMPE Symposium and Exhibition, Vol. 38, 1993, pp. 66-80.
375. K.C. Schulz, H.J. Hietala, P.P. Packman, A statistical approach to the analysis of ultimate strengths of bolted joints in laminated composites, Composites Science and Technology 56 (1996) 505-517.
376. W.H. Lin, M.H.R. Jen, Strength of bolted and bonded single-lapped composite joints in tension, Journal of Composite Materials 33 (1999) 640-666.
377. R.M. Jones, Mechanics of Composite Materials, Hemisphere Publishing, New York, 1975.
378. L.J. Hart-Smith, Mechanically fastened joints for advanced composites, Phenomenological Considerations and Simple Analysis, McDonnel Douglas Corporation DO6748A, 1978.
379. A.O. Ankara, P.G. Dara, Optimization of composite bolted joint design, Proceedings of Computer Aided Design in Composite Material Technology, CADCOMP Computational Mechanics Publication 347, 1994.
380. A.O. Ankara, P.G. Dara, Computer modeling of mechanical joints in advanced composites, Proceedings of the ASME Petroleum Division PD64, 1994, pp. 175-180.
381. W.S. Arnold, I.H. Marshal, J. Wood, Optimum design considerations for mechanically fastened composite joints, Composite Structures 16 (1990) 85-101.
382. T. Ireman, T. Nyman, K. Hellborn, On design methods for bolted joints in composite aircraft structures, Composite Structures 25 (1993) 567-578.
383. B.D. Snyder, J.G. Burns, V.B. Venkayya, Composite bolted joints analysis programs, Journal of Composites Technology Research 12 (1990) 41-51.
384. J.S. Shih, Experimental-Numerical Analysis of Bolted Joints in Finite Composites with and without Inserts, Ph.D. Thesis, University of Wisconsin-Madison, 1992.
385. B. Skalerud, Yield surface formulations for eccentrically loaded planar bolted or welded connects, Computers and Structures 48 (1992) 811-818.
386. N. Gattesco, Strength and local deformability of wood beneath bolted connectors, American Society of Civil Engineers, Journal of Structure Engineering 124 (1998) 195-202.
387. D.M. Running, J.B. Ligon, I. Miskioglu, Fastener design for transversely loaded composite plates, Journal of Composite Materials 33 (1999) 928-940.
388. C.N. Rosner, S.H. Rizkalla, Bolted connections for fiber-reinforced composite structural members: Experimental program, American Society of Civil Engineers, Journal of Materials in Civil Engineering 1 (1995) 223-231.
389. C.N. Rosner, S.H. Rizkalla, Bolted connections for fiber-reinforced composite structural members: Analytical model and design recommendations, American Society of Civil Engineers, Journal of Materials in Civil Engineering 1 (1995) 232-238.
390. L. Yang, L.Y. Ye, Study of the behavior of a composite multi-bolt joint, Computers and Structures 34 (1990) 493-497.
391. X. Wan, L. Yang, Effect of joint parameters, patterns and interference on the bolt loading in composite multi-bolt joints, International Conference of Composite Structures, 1991, p. 519.
392. M.U. Rahman, R.E. Rowlands, Finite element analysis of multiple-bolted joints in orthotropic plates, Computers and Structures 46 (1993) 859-867.
393. I. Eriksson, J. Backlund, P. Moller, 1995, Design of multiple-row bolted composite joints under general in-plane loading, Composite Engineering 5 (1995) 1051-1068.
394. B. Sergeev, E. Madenci, D.R. Ambur, Influence of bolt spacing and degree of laminate anisotropy in single-lap joints, NATO Advances Study Institute: Mechanics of Composite Material Structures, Troia, Portugal, 3, 1998, pp. 167-193.
395. S. Chutima, A.P. Blackie, Effect of pitch distance, row spacing, end distance and bolt diameter on multi-fastened composite joints, Composites, Part A: Applied Science and Manufacturing 21 (1996) 105-110.
396. P.P. Camanho, F.L. Matthews, Stress analysis and strength prediction of mechanically fastened joints in FRP: A review, Composites, Part A: Applied Science and Manufacturing 28A (1997) 529-547.
397. S. Sotiropoulos, H.V.S. GangaRao, R. Lopez-Anido, Evaluation of FRP composites bolted and adhesive joints, Proceedings of Material Engineering Conference, Vol. 1, 1996, pp. 233-242.
398. P.P. Camanho, S. Bowron, F.L. Matthews, Failure mechanisms in bolted CFRP, Journal of Reinforced Plastics and Composites 17 (1998) 205-233.
399. P.P. Camanho, F.L. Matthews, Delamination onset prediction in mechanically fastened joints in composite laminates, Journal of Composite Materials 33 (1999) 906-927.
400. W.C. Wang, Y.M. Sheu, Stress analysis of bolted joints in CFRP laminates by half-fringe birefringent-coating technique, Composite Structures 34 (1996) 91-100.
401. N.K. Hassan, C.N. Rosner, S.H. Rizkalla, Bolted connections for GFRP laminated structural members, Proceedings of Material Engineering Conference, Vol. 804, 1994, pp. 1018-1025.
402. N.K. Hassan, M.A. Mohamedien, S.H. Rizkalla, Rational model for multibolted connections for GFRP members, Journal of Composite Construction 1 (1997) 71-78.
403. N.K. Hassan, M.A. Mohamedien, S.H. Rizkalla, Multibolted joints for GFRP structural members, Journal of Composite Construction 1 (1997) 3-9.
404. N. Andreasson, C.P. Mackinlay, C. Soutis, Experimental and numerical failure analysis of bolted joints in CFRP woven laminates, Aeronautical Journal 102 (1998) 445-450.
405. J.M. Menendez, J.A. Guemes, 1999, Strain measurements inside thick CFRP laminates at the vicinity of bolted joints Proceedings of SPIE - International Society of Optical Engineering 3670 (1999) 184-194.
406. Q.M. Li, R.A.W. Mines, R.S. Birch, Static and dynamic behavior of composite riveted joints in tension, International Journal of Mechanical Science 43 (2001) 1591-1610.
407. W.J. Horn, Influence of clamp-up force on the strength of bolted composite joints, American Institute of Aeronautics and Astronautics Journal 32 (1994) 665-667.
408. C.L. Hung, Response of Mechanically Fastened Composite Joints under Multiple Bypass Loads, Ph.D. Thesis, Stanford University, 1994.
409. C.L. Hung, Y. Yan, F.K. Chang, Strength envelope of bolted composite joints under multi-axial bypass loads, AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Material Conference, 1994, pp. 2298-2307.
410. C.L. Hung, F.K. Chang, Bearing failure of bolted composite joints. Part II: model and verification, Journal of Composite Materials 30 (1996) 1359-1400.
411. C.L. Hung, F.K. Chang, Strength envelope of bolted composite joints under bypass loads, Journal of Composite Materials 30 (1996) 1402-1435.
412. Y. Yan, W.D. Wen, F.K. Chang, P. Shyprykevich, Experimental study on clamping effects on the tensile strength of composite plates with a bolt-filled hole, Composites - Part A: Applied Science and Manufacturing 30 (1999) 1215-1229.
413. M.A. Erki, et al., Design of glass-fiber reinforced plastic bolted connections, Microcomposite in Civil Engineering 8 (1993) 367-376.
414. P. Lazzarin, V. Milani, M. Quaresimin, Scatter bands summarizing the fatigue strength of aluminum alloy bolted joints, International Journal of Fatigue 19 (1997) 401-407.
415. B. Atzori, P. Lazzarin, M. Quaresimin, A re-analysis on fatigue data of aluminum alloy bolted joints, International Journal of Fatigue 19 (1997) 579-588.
416. R.S. Birch, M. Alves, Dynamic failure of structural joint systems, Thin-Walled Structures 36 (2000) 137-154.
417. J. Bolton, Design consideration for high temperature bolting, in: Performance of Bolting Materials in High Temperature Plant Applications, The Institute of Materials, London, UK, 1995, pp. 1-14.
418. M.B.H. Mantelli, M.M. Yovanovich, Compact analytical model for overall thermal resistance of bolted joints, International Journal of Heat Mass Transfer 41 (1998) 1255-1266.
419. T. Fukuoka, Q. Xu, K. Yoshida, Numerical analysis of the mechanical behaviors of bolted joint under thermal load ASME Proceedings of Reliability, Stress Analysis, and Failure Prevention Issues, DE-Vol. 110, 2000, pp. 127-132.
420. F.V. Ellis, D.R. Sielski, R. Viswanathan, An improved analytical method for life prediction of bolting, American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 123 (2001) 70-74.
421. J. Schive, The Fatigue Strength of Riveted Joints and Lugs, National Advisory Committee for Aeronautics NACA TM 1395, 1956.
422. V. Seliger, Effect of Rivet Pitch Upon the Fatigue Strength of Single-Row Riveted Joints of 0.025 to 0.025-inch 24S-T ALCLAD, National Advisory Committee for Aeronautics NACA TN 900, 1943.
423. K. Iyer, G.T. Hahn, P.C. Bastias, C.A. Rubin, Analysis and fretting in pinned connections, Wear 181 (1995) 524-530.
424. K. Iyer, C.A. Rubin, G.T. Hahn, Three-dimensional analysis of single rivet-row lap joints - part I: elastic response, Recent Advances in Solids and Structures, ASME Pressure Vessels and Piping PVP-Vol. 398, 1999, pp. 23-40.
425. T.N. Farris, A.F. Grandt Jr., G. Harish, H.L. Wang, Analysis of widespread fatigue damage in structural joints, Proceedings of the 41 st International SAMPE Symposium and Exhibition, 1996, pp. 65-79.
426. G. Harish, T.N. Farris, Effect of fretting contact stress on crack nucleation in riveted lap joints, Proceedings of the 39th AIAA/ASME/ASCE/AHS/ ASCE Structures, Structural Dynamics, and Material Conference, Part 1, 1998, pp. 383-391.
427. B. Langrand, E. Deletombe, E. Markiewics, P. Drazetic, Riveted joint modeling for numerical analysis of airframe crashworthiness, Finite Elements in Analysis and Design 38 (2001) 21-44.
428. H. Terada, A study on fundamental damage tolerant testing methods, durability of metal aircraft structures, Proceedings of the International Workshop on Structural Integrity of Aging Airplanes, Atlanta, 1992, pp. 472-482.
429. H. Terada, A proposal on damage tolerant testing for structure integrity of aging aircraft - learning from Jal accident in 1985, Fracture Mechanics, Vol. 25, ASTM STP 1220, 1995, pp. 557-574.
430. H. Terada, Structural fatigue and joint degradation, International Journal of Fatigue 23 (2001) S21-S30.
431. H. Terada, T. Okada, Problems of mechanics in structural integrity of aging aircraft safety, Proceedings of the International Workshop on Technical Elements for Aviation Safety, Tokyo, 1999, pp. 150-157.
432. H. Terada, T. Okada, Fatigue test of fuselage scale model under simulated service loading, NAL Research Progress, 2000, pp. 44-45.
433. S. Furuta, H. Terada, H. Sashikuma, Fatigue strength of fuselage joint structure under ambient and corrosive environment, Proceedings of the 19th Symposium of ICAF, Vol. 1, 1997, pp. 231-249.
434. L. Mordfin, Creep and creep-rupture characteristics of some riveted and spot-welded lap joints of aircraft materials, National Advisory Committee for Aeronautics NACA TN 3412, 1955.
435. L. Mordfin, A.C. Legate, Creep behavior of structural joints of aircraft materials under constant loads and temperatures, National Advisory Committee for Aeronautics NACA TN 3842, 1957.
436. M.E. Barzelay, G.F. Holloway, Effect of an interface on transient temperature distribution in composite aircraft joints, National Advisory Committee for Aeronautics NACA TN 3824, 1957.
437. M.E. Barzelay, G.F. Holloway, Interface of thermal conductance of twenty-seven riveted aircraft joints, National Advisory Committee for Aeronautics NACA TN 3991, 1957.
438. R.J. Wright, W.S. Johnson, Effect of thermal aging on the bolt bearing behavior of highly loaded composite joints, Proceedings of the American Society of Composites 709 (1996) 1076-1085.
439. Y.J. Chiang, R.E. Rowlands, Finite element analysis of mixed-mode fracture of bolted composite joints, Journal of Composite Technological Research 13 (1991) 227-235.
440. L.F.M. Silva, J.P.M. Goncalves, F.M.F. Olveira, P.M.S.T. de Castro, Multiple-site damage in riveted lap-joints: experimental simulation and finite element prediction, International Journal of Fatigue 22 (2000) 319-338.
441. J.L. Beuth, J.W. Hutchinson, Fracture analysis of multi-site cracking in fuselage lap joints, Computational Mechanics 13 (1994) 315-331.
442. R.P.G. Müller, An Experimental and Analytical Investigation on the Fatigue Behavior of Fuselage Lap Joints, Ph.D. Thesis, Delft University of Technology, The Netherlands, 1995.
443. R. Piascik, S. Willard, Characterization of multi-site damage in fuselage structure, Proceedings of the First Joint DoD/FAA/NASA Conference on Aging Aircraft, Ogden, UT, 1997.
444. G. Harish, M.P. Szolwinski, T.N. Farris, Finite element modeling of rivet installation and riveted joints for prediction of fretting crack nucleation, Proceedings of the First Joint DoD/FAA/NASA Conference on Aging Aircraft, Ogden, Utah, 1997.
445. J.N. Dickson, T.M. Hsu, J.M. McKinney, Development of an Understanding of the Fatigue Phenomena of Bonded and Bolted Joints in Advanced Filamentary Composite Materials, AFFDL-TR-72-64, Vols. I & II, Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base, OH, 1972.
446. K.C. Schulz, H.J. Hietala, P.F. Packman, Statistical analysis of bushing, sleeve, and oversize hole effects on the bolted joint strength of graphite/epoxy laminates, American Society for Testing Materials, Journal of Composites Technology and Research 17 (1995) 17-32.
447. K.C. Schulz, P.E. Packman, J.R. Eisenmann, Tension-mode fracture model for bolted joints in laminated composites, Journal of Composite Materials 29 (1995) 37-58.
448. Y.J. Chiang, R.E. Rowlands, Finite element analysis of mixed-mode fracture of bolted composite joints, Journal of Composite Technological Research 13 (1991) 227-235.
449. H.S. Wang, C.L. Hung, F.K. Chang, Bearing failure of bolted composite joints. Part I: experimental characterization, Journal of Composite Materials 30 (1996) 1284-1313.
450. M.S. Forte, J.M. Whitney, N.J. Pagano, 1998, Influence of adhesive reinforcement on the mode I fracture toughness of a bonded joint, Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Materials Conference, Part II, pp. 1605-1615.
451. M.D. Gilchrist, R.A. Smith, Development of cohesive fatigue cracks in t-peel joints, International Journal of Adhesion and Adhesives 13 (1993) 53-57.
452. M.D. Gilchrist, R.A. Smith, Fatigue growth of cohesive defects in t-peel joints, Journal of Adhesion 42 (1993) 179-190.
453. N. Su, R.I. Mackie, Two-dimensional creep analysis of structural adhesive joints, International Journal of Adhesion and Adhesives 13 (1993) 33-40.
454. A.E. Bogdanovich, I. Kizhakkethara, Three-dimensional finite element analysis of adhesively bonded plates, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 7-10, Kissimmee, FL, 1997, pp. 1984-1993.
455. S.L. Donaldson, A.K. Roy, Experimental studies on composite bonded joints, Proceedings of the 11th International Conference of Composite Material (ICCM-11), Australia, 14-18 July, 1997.
456. A.K. Roy, S.L. Donaldson, Experimental investigation of crack-front profile in bonded composite materials, Proceedings of ASME WAM IMECE, Dallas, 1997.
457. A.K. Roy, S.L. Donaldson, G.A. Schoeppner, Bonded joints of unidirectional and cross-ply laminates: an experimental study, Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Materials Conference, Kissimmee, FL, 1997.
458. G.A. Schoeppner, A.K. Roy, S.L. Donaldson, Damage progression in bonded composite double-lap joints, AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Materials Conference, Part 2, 1998, pp. 1594-1604.
459. C.L. Chow, T.J. Lu, Analysis of failure properties and strength of structural adhesive joints with damage mechanics, International Journal of Damage Mechanics 1 (1992) 404-434.
460. F.C. Edde, Fatigue des Joints Colles Structuraux, Ph.D. Thesis, Ecole Polytech, Canada, 1992.
461. F.C. Edde, Y. Verreman, On the fracture parameters in a clamped cracked lap shear adhesive joint, International Journal of Adhesion and Adhesives 12 (1992) 43-48.
462. G. Fernlund, et al., Fracture load predictions for adhesive joints, Computer Science and Technology 51 (1994) 587-600.
463. A.P. Assanelli, E.N. Dvorkin, Finite element models of OCTG threaded connections, Computers and Structures 46 (1993) 725-734.
464. L. Dorn, N. Salem, FEM calculations of plastic-metal adhesive joints: a way of describing the state of stressing in the adhesion zone as a function of the time, Adhesion 37 (1993) 34-38.
465. H.I. Epstein, F.S. Gulia, Finite element studies of bolt stagger effects in tension members, Computers and Structures 48 (1993) 1153-1156.
466. A.M. Hoor, et al., Developments in finite element analysis of single bolted timber joints, in: S. Valiappan (Ed.), Composite Mechanics: Concrete Composites, Balkema, Rotterdam, 1993, pp. 745-750.
467. C.C. Lin, C.H. Lin, Stress and strength analysis of composite joints using direct boundary element method, Composite Structures 25 (1993) 209-215.
468. C.C. Lin, Y.S. Lin, A finite element model of single-lap adhesive joints, International Journal of Solids and Structures 30 (1993) 1679-1692.
469. D.Y. Hwang, J.M. Stallings, Finite element analysis of bolted flange connections, Computers and Structures 51 (1994) 521-533.
470. N.K. Hassan, M.A. Mohamedien, S.H. Rizkalla, Finite element analysis of bolted connections for PFRP composites, Composites Part B: Engineering 27 (1996) 339-349.
471. A.R. Kallmeyer, R.I. Stephens, Finite element model for predicting time-dependent deformations and damage accumulation in laminated composite bolted joints, Journal of Composite Materials 33 (1999) 794-826.
472. G. Richardson, et al., A comparison of two- and three-dimensional finite element analyses of adhesive joints, International Journal of Adhesion and Adhesives 13 (1993) 193-200.
473. A.E. Bogdanovich, S.P. Yushanov, 3-D Progressive failure analysis of bonded composite joints, Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASCE Structures, Structural Dynamics, and Materials Conference, Part II, 1998, pp. 1616-1626.
474. E.V. larve, Three-dimensional stress analysis in laminated composites with fasteners based on the B-spline approximation, Composites - Part A: Applied Science and Manufacturing 28 (1997) 559-571.
475. E.V. Iarve, Three-dimensional singular stresses in open hole and rigid fastener composites, American Society of Mechanical Engineers, Materials Division, MD 84 (1998) 255-257.
476. E.V. larve, Three-dimensional stress analysis of fastener hole composites, American Society of Mechanical Engineers, Materials Division MD 69 (1998) 345-355.
477. U. Edlund, A. Larbring, A geometrically nonlinear model of the adhesive joint problem and its numerical treatment, Computational Methods in Applied Mechanical Engineering 96 (1992) 329-350.
478. U. Edlund, Surface adhesive joint description with coupled elastic-plastic damage behavior and numerical applications, Computational Methods in Applied Mechanical Engineering 115 (1994) 253-276.
479. D.W. Wilson, Y. Tsujimoto, On Phenomenological Failure Criteria for Composite Bolted Joint Analysis, Composites Science and Technology 26 (1986) 283-305.
480. R.E. Little, P.K. Mallick, Fatigue of bolted joints in SMC-R18 sheet molding compound composites, Journal of Composite Technical Research 12 (1990) 155-163.
481. R.E. Little, P.K. Mallick, Fatigue of bolted joints between e-glass/epoxy composite and steel, Proceedings of American Society of Composites, 1993, pp. 409-418.
482. D. Liu, B.Z. Ying, W.G. Gua, Selection and measure of the bearing fatigue damage parameter in CFRP laminate bolted joints, International Conference of Composite Structures, 1991, p. 531.
483. D. Liu, W.G. Gau, K.D. Zhang, B.Z. Ying, Empirical damage evaluation of graphite/epoxy laminate bolt joint in fatigue, Theoretical Applied Fracture Mechanics 19 (1993) 145-150.
484. C.L. Rao, Deformation and Failure of Adhesively Bonded Elastomeric Lap Joints, D.Sc. Thesis, Massachusetts Institute of Technology, 1992.
485. P.D. Herrington, M. Sabbaghian, Fatigue failure of composite bolted joints, Journal of Composite Material 27 (1993) 491-512.
486. W.H. Chen, S.S. Lee, Numerical and experimental failure analysis of composite laminates with bolted joints under bending loads, Journal of Composite Materials 29 (1995) 15-36.
487. A. Lanciotte, L. Lazzeri, M. Raggi, Fatigue behavior of mechanically fastened joints in composite materials, Composite Structures 33 (1995) 87-94.
488. A. Banbury, D.W. Kelly, Study of fastener pull-through failure of composite laminates: Part 1, experimental, Composite Structures 45 (1999) 241-254.
489. R.A. Jurf, J.R. Vinson, Failure analysis of bolted joints in composite laminates, ASTM Special Technical Publication 1059, 1990, p. 165.
490. R. Yuuki, et al., Evaluation of fracture and strength of metal/ceramic bonded joints based on interfacial fracture mechanics, Transaction of the Japanese Society of Mechanical, Series A 60 (1994) 37-45.
491. W.H. Chen, S.S. Lee, J.T. Yeh, Three-dimensional contact stress analysis of a composite laminate with bolted joints, Composite Structures 30 (1995) 287-297.
492. H.J. Lin, C.C. Tsai, Failure analysis of bolted connections of composites with drilled and molded-in hole, Composite Structures 30 (1995) 159-168.
493. H.A. Whitworth, Fatigue evaluation of composite bolted and bonded joints, SAMPE Journal of Advanced Materials 30 (1998) 25-31.
494. A. Banbury, A.D.W. Kelly, L.K. Jain, Study of fastener pull-through failure of composite laminates: Part 2, Failure prediction, Composite Structures 45 (1999) 255-270.
495. H.Y. Ko, B.M. Kwak, S. Im, Contact stress and failure analysis on bolted joints in composite plates by considering material nonlinearity, International Conference of Computer Aided Design in Composite Material Technology, Computational Mechanics Publication, 1996, pp. 31-40.
496. C.C. Chamis, S.N. Singhal, L. Minnetyan, Probabilistic simulation of progressive fracture in bolted joint composite laminates, National Aeronautics and Space Administration Tech Memo 107, 1996.
497. L. Minnetyan, C.C. Chamis, P.K. Gotis, Damage progression in bolted composites, Journal of Thermoplastic Composite Materials 11 (1998) 231-248.
498. L. Tong, Bearing failure of composite bolted joints with non-uniform bolt-to-washer clearance, Composites: Part A 31 (2000) 609-615.
499. P.R. Borgmeier, K.L. DeVries, Fracture mechanics analysis of the effects of tapering adherends on the strength of adhesive lap joints, Journal of Adhesion Science and Technology 1 (1993) 967-986.
500. P.R. Borgmeier, A Fracture Mechanics Analysis of Double Cantilever Beam Adhesive Joints: Effects of Adhesive and Adherends Thickness, Ph.D. Thesis, The University of Utah, 1994.
501. E.D. Reedy, T.R. Guess, Composite-to-metal tubular lap joints: strength and fatigue resistance, International Journal of Fracture 63 (1993) 351-367.
502. C. Cooper, G.J. Turvey, Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material, Composite Structures 32 (1995) 217-226.
503. G.J. Turvey, Single-bolt tension joint tests on pultruded GRP plate - effects of tension direction relative to pultrusion direction, Composite Structures 42 (1998) 341-351.
504. D.S. Saunders, The development of fatigue damage around fastener holes in thick graphite/epoxy composite laminates, Composites 24 (1993) 309-321.
505. S.C. Galea, D.S. Saunders, Effects of hot/wet environments on the fatigue behavior of composite-to metal mechanically fastened joints, Proceedings of the International Conference of Advanced Composite Materials, Mine, Metallurgy, and Material Society (TMS), 1993, pp. 525-531.
506. S.C. Galea, L. Mirabella, W.K. Chiu, Non-destructive Evaluation of Composite-to-metal Mechanically Fastened Joints, National Conference Publications, Institute of Engineering, Australia 1(93), Part 6, 1993, pp. 87-93.
507. R.L. Ramkumar, E.W. Tossavainen, Strength and life time of bolted laminates, in: Fatigue in Mechanically Fastened Composite and Metallic Joints, ASTM STP 927, 1986, pp. 251-273.
508. Y. Xiong, Analytical method for failure prediction of multi-fastener composite joints, International Journal of Solids and Structures 33 (1996) 4395-4409.
509. P. Destuynder, et al., Some theoretical aspects in computational analysis of adhesive lap joints, International Journal of Numerical Methods in Engineering 35 (1992) 1237-1262.
510. J.H. Park, S.N. Atluri, Fatigue growth of multiple-cracks near a row of fastener-holes in a fuselage lap-joint, Computational Mechanics 13 (1993) 189-203.
511. E. Persson, I. Eriksson, Fatigue of multiple-row bolted joints m carbon/epoxy laminates: ranking of factors affecting strength and fatigue life, Journal of Fatigue 21 (1999) 337-353.
512. J.M. Whitney, R.J. Nuismer, Stress fracture criteria for laminated composites containing stress concentrations, Journal of Composite Materials 8 (1974) 253-265.
513. L. Ryna, J. Monaghan, Failure mechanism of riveted joint in fiber metal laminates, Journal of Material Processing and Technology 103 (2000) 36-43.
514. O. Allix, Damage analysis of delamination around a hole, in: P. Ladevez (Ed.) New Advances in Composite Structure Mechanics, Elsevier, Amsterdam, 1992, pp. 411-421.
515. J. Schön, T. Nyman, Spectrum fatigue of composite bolted joints, International Journal of Fatigue 24 (2002) 273-279.
516. R. Starikov, J. Schön, Local fatigue behavior of CFRP bolted joints, Composite Science and Technology 62 (2002) 243-253.