Finite element model for predicting time-dependent deformations and damage accumulation in laminated composite bolted joints

Journal of Composite Materials

Volumn 33, Issue 9, 1999, Pages 794-826

  Kallmeyer, Alan R ^a   Stephens, Ralph I ^b  

^a NORTH DAKOTA STATE UNIVERSITY   (United States)

^b UNIVERSITY OF IOWA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOLTED JOINTS; COMPUTER SIMULATION; CREEP; DEFORMATION; FIBER REINFORCED PLASTICS; FINITE ELEMENT METHOD; MECHANICAL PROPERTIES; VISCOPLASTICITY;

DAMAGE ACCUMULATION; ELEVATED TEMPERATURE;

LAMINATED COMPOSITES;

EID: 0032661923     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/002199839903300902     Document Type: Article

References (38)

1. Gates. T. S. 1993. "Effects of Elevated Temperature on the Viscoplastic Modeling of Graphite/Polymeric Composites," High Temperature and Environmental Effects on Polymeric Composites, ASTM STP 1174, C. E. Harris and T. S. Gates, eds., Philadelphia: American Society for Testing and Materials, pp. 201-221.
2. Gates, T. S. and Sun, C. T. 1991. "Elastic/Viscoplastic Constitutive Model for Fiber Reinforced Thermoplastic Composites," AIAA Journal, 29:457-463.
3. Gates, T. S. 1991. "Rate Dependent Stress-Strain Behavior of Advanced Polymer Matrix Composites," NASA TM 104070, NASA Langley Research Center.
4. Gates, T. S. 1993. "Matrix-Dominated Stress/Strain Behavior in Polymeric Composites: Effects of Hold Time, Nonlinearity, and Rate Dependency," Composite Materials: Testing and Design (Eleventh Volume), ASTM STP 1206, E. T. Camponeschi, Jr., ed., Philadelphia: American Society for Testing and Materials, pp. 177-189.
5. Mohan, R. and Adams, D. F. 1985. "Nonlinear Creep-Recovery Response of a Polymer Matrix and its Composites," Experimental Mechanics, 25:262-271.
6. Yancey, R. N. and Pondera, M. J. 1990. "Micromechanical Analysis of the Creep Response of Unidirectional Composites," Journal of Engineering Materials and Technology, 112:157-163.
7. Tuttle, M. E. and Brinson, H. F. 1986. "Prediction of the Long-Term Creep Compliance of General Composite Laminates," Experimental Mechanics, 26:89-102.
8. Ha, S. K., Wang, Q. and Chang, F. K. 1991. "Modeling the Viscoplastic Behavior of Fiber-Reinforced Thermoplastic Matrix Composites at Elevated Temperatures," Journal of Composite Materials, 25:334-374.
9. Chung, I., Sun, C. T., and Chang, I. Y. 1993. "Modeling Creep in Thermoplastic Composites," Journal of Composite Materials, 27:1009-1029.
10. Crews, J. H., Jr. and Naik, R. V. A. 1986. "Failure Analysis of a Graphite/Epoxy Laminate Subjected to Bolt-Bearing Loads," Composite Materials: Fatigue and Fracture, ASTM STP 907, H. T. Hahn, ed., Philadelphia: American Society for Testing and Materials, pp. 115-133.
11. Crews, J. H. Jr. 1981. "Bolt-Bearing Fatigue of a Graphite/Epoxy Laminate," Joining of Composite Materials, ASTM STP 749, K. T. Kedward, ed., Philadelphia: American Society for Testing and Materials, pp. 131-144.
12. Eriksson, I. 1990. "On the Bearing Strength of Bolted Graphite/Epoxy Laminates," Journal of Composite Materials, 24:1246-1269.
13. Ramkumar, R. L. and Tossavainen, E. W. 1986. "Strength and Lifetime of Bolted Laminates," Fatigue in Mechanically Fastened Composite and Metallic Joints. ASTMSTP 927, John M. Potter, ed., Philadelphia: American Society for Testing and Materials, pp. 251-273.
14. Kam, C. Y., 1981. "Bolt Hole Growth in Graphite-Epoxy Laminates for Clearance and Interference Fits When Subjected to Fatigue Loads," Fatigue of Fibrous Conmposite Materials, ASTM STP 723, Philadelphia: American Society for Testing and Materials, pp. 21-30.
15. Kim, R. Y. and Whitney, J. M. 1976. "Effect of Temperature and Moisture on Pin Bearing Strength of Composite Laminates," Journal of Composite Materials, 10:149-155.
16. Wilkins, D. J. 1977. "Environmental Sensitivity Tests of Graphite-Epoxy Bolt Bearing Properties," Composite Materials: Testing and Design (Fourth Conference), ASTM STP 617, Philadelphia: American Society for Testing and Materials, pp. 497-513.
17. Wong, C. M. S. and Matthews, F. L. 1981. "A Finite Element Analysis of Single and Two-Hole Bolted Joints in Fibre Reinforced Plastic," Journal of Composite Materials, 15:481-491.
18. Soni, S. R. 1981, "Failure Analysis of Composite Laminates with a Fastener Hole," Joining of Composite Materials, ASTM STP 749, K. T. Kedward, ed., Philadelphia: American Society for Testing and Materials, pp. 145-164.
19. Chang, F. K., Scott, R. A., and Springer, G. S. 1982. "Strength of Mechanically Fastened Composite Joints," Journal of Composite Materials, 16:470-494.
20. Shivakumar, K. N. and Crews, J. H., Jr. 1983. "Bolt Clampup Relaxation in a Graphite/Epoxy Laminate," Long-Term Behavior of Composites, ASTM STP 813, T. K. O'Brien, ed., Philadelphia: American Society for Testing and Materials, pp. 5-22.
21. Chang, F. K. and Chang, K. Y. 1987. "A Progressive Damage Model for Laminated Composites Containing Stress Concentrations," Journal of Composite Materials, 21:834-855.
22. Chang, F. K. and Lessard, L. B. 1991. "Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Compressive Loadings: Part I - Analysis," Journal of Composite Materials, 25:2-43.
23. Tan, S. C. 1991. "A Progressive Failure Model for Composite Laminates Containing Openings," Journal of Composite Materials, 25:556-577.
24. Chang, F. K. and Chang, K. Y. 1987. "Post-Failure Analysis of Bolted Composite Joints in Tension or Shear-Out Mode Failure," Journal of Composite Materials, 21:809-833.
25. Jones, R. M. 1975. Mechanics of Composite Materials, New York: Hemisphere Publishing Corporation.
26. Sun, C. T. and Chen, J. L. 1989. "A Simple Flow Rule of Characterizing Nonlinear Behavior of Fiber Composites," Journal of Composite Materials, 23:1009-1020.
27. Malvern, L. E. 1951. "The Propagation of Longitudinal Waves of Plastic Deformation in a Bar of Material Exhibiting a Strain-Rate Effect," ASME Journal of Applied Mechanics, 18:203-208.
28. Phillips, A. and Wu, H. C. 1973. "A Theory of Viscoplasticity," International Journal of Solids and Structures, 9:15-30.
29. Yeh, N. M. and Krempl, E. 1992. "Thermoviscoplasticity Based on Overstress Applied to the Analysis of Fibrous Metal-Matrix Composites," Journal of Composite Materials, 26:969-990.
30. Nahas, M. N. 1986. "Survey of Failure and Post-Failure Theories of Laminated Fiber-Reinforced Composites," Journal of Composites Technology and Research, 8:138-153,
31. Hashin, Z. 1980. "Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, 47:329-334.
32. Kallmeyer, A. R. 1995. "Time-Dependent Behavior of Bolted Joints in a Polymer Matrix Composite Laminate at Ambient and Elevated Temperatures," Ph.D. Thesis, The University of Iowa, Iowa City, Iowa.
33. Kallmeyer, A. R. and Stephens, R. I. 1997. "Creep Elongation of Bolt Holes Subjected to Bearing Loads in a Polymer Matrix Composite Laminate," Composite Materials: Fatigue and Fracture (Sixth Volume), ASTM STP 1285, E. A. Armanios, ed., Philadelphia: American Society for Testing and Materials, pp. 454-469.
34. BASF Structural Materials, Inc. 1990. Celion G40-800 Carbon Fibers Product Information Sheet.
35. Hercules Inc. 1989. Hercules Carbon Fiber Type IM7 Product Data Sheet.
36. Schwartz, M. M. 1997. Composite Materials, Volume I: Properties, Nondestructive Testing, and Repair. New Jersey: Prentice Hall.
37. Naik, R. A. and Crews, J. H., Jr. 1986. "Stress Analysis Method for a Clearance-Fit Bolt under Bearing Loads," AIAA Journal, 24:1348-1353.
38. Johnson, W. S. 1993. Personal communication, NASA Langley Research Center.