TRANSPORT PHENOMENA IN THE IMPACT OF A MOLTEN DROPLET ON A SURFACE: PART II: HEAT TRANSFER AND SOLIDIFICATION

Annual Review of Heat Transfer

Volumn 11, Issue , 2000, Pages 145-205

  Attinger, D ^a   Haferl, S ^a   Zhao, Z ^a   Poulikakos, D ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

DROP BREAKUP; HEAT TRANSFER; LIQUID METALS; MASS TRANSFER; NEWTONIAN LIQUIDS; PHASE INTERFACES; SURFACE TENSION; THERMAL GRADIENTS; TRANSPORT PROPERTIES; WETTING;

COALESCENCE PHENOMENON; FLUID-DYNAMICS; FREE LIQUID SURFACE; GASEOUS ENVIRONMENTS; HEAT TRANSFER AND SOLIDIFICATIONS; IMPACT PROBLEM; LIQUID DROPLETS; MOLTEN DROPLETS; SOLID SURFACE; TRANSPORT PHENOMENON;

SOLIDIFICATION;

EID: 85162878264     PISSN: 10490787     EISSN: 23750294     Source Type: Book Series    
DOI: 10.1615/AnnualRevHeatTransfer.v11.50     Document Type: Chapter

References (95)

1. H. Jones, Splat Cooling and Metastable Phases, Report ofProgress in Physics, Vol. 48, pp. 1425-1497, 1973.
2. H. Jones, Rapid Solidification ofMetals andAlloys, Vol. 8, Great Britain Institution of Metallurgists, London, 1982.
3. T. R. Anantharaman and C. Suryanarayana, Review: A decade of Quenching from the Melt,./. Mat. Sci., Vol. 6, pp. 1111-1135, 1971.
4. H. Jones, Cooling, Freezing and Substrate Impact of Droplets Formed by Rotary Atomization, J. Phys. D: Appi. Phys., Vol. 4, pp. 1657-1660, 1971.
5. L. Bolle and J. C. Moureau, Spray Cooling ofHot Surfaces, Vol. 1, pp. 1 -97, McGrawHill, Hemisphere, Auckland, 1982.
6. S. Toda, A Study of Mist Cooling (2nd Report: Theory of Mist Cooling and Its Fundamental Experiments), Heat Transfer Japanese Res., Vol. 3, pp. 1-44, 1974.
7. K. Araki and A. Moriyama, Theory on Deformation Behavior of a Liquid Droplet Impinging onto Hot Metal Surface, Trans. ISIJ, Vol. 21, pp. 583-590, 1981.
8. T. Ueda, T. Enomoto, and M. Kanetsuki, Heat Transfer Characteristics and Dynamic Behavior of Saturated Droplets Impinging on a Heated Vertical Surface, Bull. JAME, Vol. 22, pp. 724-732, 1979.
9. P. Savie and G. T. Boult, The Fluid Flow Associated with the Impact of Liquid Drops with Solid Surfaces, Nat. Res. Council Canada, Rept. no. MT-26, 1955.
10. C. O. Pederson, An Experimental Study of the Dynamic Behavior and Heat Transfer Characteristics of Water Droplets Impinging upon a Heated Surface, Int. J. Heat Mass Transfer, Vol. 13, pp. 369-381, 1970.
11. S. Tnada, Y. Miyasaka, K. Nishida, and G. R. Chandratilleke, Transient Temperature Variation of a Hot Wall due to an Impinging Water Drop—Effect of Subcooling of the Water Drop, Proc. ASME-JSME Thermal Eng. Joint Conf., Vol. 1, pp. 173-182, 1983.
12. L. H. Wächters and N. A. J. Westerling, The Heat Transfer from a Hot Wall to Impinging Water Drops in the Spherical State, Chem. Eng. Sci., Vol. 21, pp. 1047-1056, 1966.
13. J. Bernardin, C. J. Stebbins, and I. Mudawar, Mapping of Impact and Heat Transfer Regimes of Water Drops Impinging on a Polished Surface, Int. J. Heat Mass Transfer, Vol. 40, pp. 247-267, 1997.
14. Z. Zhao, D. Poulikakos, and J. Fukai, Heat Transfer and Fluid Dynamics during the Collision of a Liquid Droplet on a Substrate: I-Modeling, Int. J. Heat Mass Transfer, Vol. 39, pp. 2771-2789, 1996.
15. J. Fukai, Z. Zhao, D. Poulikakos, C. M. Megaridis, and O. Miyatake, Modeling of the Deformation of a Liquid Droplet Impinging upon a Flat Surface, Phys. Fluids A, Vol. 5, pp. 2588-2599, 1993.
16. J. M. Waldvogel, D. Poulikakos, D. B. Wallace, and R. Marusak, Transport Phenomena in Picoliter Size Solder Droplet Dispension, J. Heat Transfer, Vol. 118, pp. 148 156, 1996.
17. D. S. Hayes and D. B. Wallace, Solder Jet Printing: Wafer Bumping and CSP Applications, Chip Scale Rev., Vol. 2, pp. 75-80, 1998.
18. G. X. Wang and E. F. Matthys, Modeling of Heat Transfer and Solidification during Splat Cooling: Effect of Splat Thickness and Splat/Substrate Thermal Contact, Int. J. Rapid Solidification, Vol. 6, pp. 141-174, 199J.
19. G. Trapaga, E. F. Mathys, J. J. Valencia, and J. Szekely, Fluid Flow, Heat Transfer and Solidification of Molten Metal Droplets Impinging on Substrates: Comparison of Numerical and Experimental Results, Metall. Trans. B, Vol. 23, pp. 701-718, 1992.
20. Y. M. Qiao and S. Chandra, Boiling of Droplets on a Hot Surface in Low Gravity, Int. J. Heat Mass Transfer, Vol. 39, pp. 1379-1393, 1996.
21. T. Bennett and D. Poulikakos, Heat Transfer Aspects of Splat-Quench Solidification: Modeling and Experiment, J. Mat. Sci., Vol. 29, pp. 2025-2039, 1994.
22. J. M. Waldvogel and D. Poulikakos, Solidification Phenomena in Picoliter Size Solder Droplet Deposition on a Composite Substrate, Int. J. Heat Mass Transfer, Vol. 40, pp. 295-309, 1997.
23. S. Schiaffino and A. A. Sonin, Molten Droplet Deposition and Solidification at Low Weber Numbers, Phys. Fluids, Vol. 9, pp. 3172-3187, 1997.
24. M. Pasandideh-Fard, R. Böhla, S. Chandra, and J. Mostaghimi, Deposition of Tin Droplets on a Steel Plate: Simulations and Experiments, Int. J. Heat and Mass Transfer, Vol. 41, pp. 2929-2945, 1998.
25. J. Madejski, Solidification of Droplets on a Cold Surface, Int. J. Heat Mass Transfer, Vol. 19,'pp. 1009-1013, 1976.
26. X. Zhang and O. A. Basaran, Dynamic Surface Tension Effects in Impact of a Drop with a Solid Surface, J. Coll. Inter. Sci., Vol. 187, pp. 166-178, 1997.
27. J. Madejski, Droplets on Impact with a Solid Surface, Int. J. Heat Mass Transfer, Vol. 26, pp. 1095-1098, 1983.
28. R. Mcpherson, On the Formation of Thermally Sprayed Alumina Coatings, J. Mat. Sci., Vol. 15, pp. 3141-3149, 1980.
29. T. Bennett and D. Poulikakos, Splat-Quench Solidification: Estimating the Maximum Spreading of a Droplet Impacting a Solid Surface, J. Mat. Sci., Vol. 28, pp. 963-970, 1993.
30. M. Pasandideh-Fard, Y. M. Qiao, S. Chandra, and J. Mostaghimi, Capillary Effects during Droplet Impact on a Solid Surface, Phys. Fluids, Vol. 8, pp. 650-659, 1996.
31. D. Attinger, Z. Zhao, and D. Poulikakos, Analytical Estimation of the Maximum Spreading Diameter during Impact of a Drop on a Colder Surface Including Thermocapillary and Gravitational Effects, 11ASS 1999 Conf., Spray Impact on Wall and Films, pp. 1-6, Toulouse 5-7 July 1999.
32. F. Gao and A. Sonin, Precise Deposition of Molten Microdrops: The Physics of Digital Microfabrication, Proc. R. Soc. London A, Vol. 444, pp. 533-554, 1994.
33. M. Orme, C. Huang, and J. Courier, Deposition Strategies for Control of Microstructures Microporosity and Surface Roughness in Droplet-Based Solid Freeform Fabrication of Structural Materials, in E. F. Matthys and W. G. Truckner (eds.), Melt Spinning, Strip Casting and Slab Casting, pp. 125-143, Minerals, Metals and Materials Society, Warrendale, PA, 1996.
34. R. H. Rangel and X. Bian, Metal-Droplet Deposition Model including Liquid Deformation and Substrate Remelting, int. J. Heat Mass Transfer, Vol. 40, pp. 2549-2564, 1997.
35. M. Salcudean and Z. Abdullah, On the Numerical Modeling of Heat Transfer during Solidification Processes, Int. J. Num. Meth. Eng., Vol. 25, pp. 445-473, 1988.
36. W. Shyy, H. S. Udaykumar, M. M. Raom, and R. W. Smith, Computational Huid Dynamics with Moving Boundaries, Taylor and Francis, 1996.
37. H. Liu, E. J. Lavernia, and R. H. Rangel, Numerical Simulation of Substrate Impact and Freezing of Droplets in Plasma Spray Processes, J. Phys. D: Appi. Phys., Vol. 26, pp. 1900-1908, 1993.
38. J. Che, S. Ceccio, and G. Tryggvason, in 1999 TMS Annual Meeting, San Diego, February 1999.
39. W. Bushko and I. R. Grosse, New Finite Element Method for Multidimensional Phase Change Heat Transfer Problems, Numerical Heat Transfer B, Vol. 19, pp. 31-48, 1991.
40. G. X. Wang and E. F. Matthys, Experimental Investigation of Interfacial Thermal Conductance for Molten Metal Solidification on a Substrate, J. Heat Transfer, Vol. 118, pp. 157-163, 1996.
41. S. Annavarapu, D. Apelian, and A. Lawley, Spray Casting of Steel Strip: Process Analysis, Metall. Trans. A, Vol. 21, pp. 3237-3256, 1990.
42. D. J. Hayes, D. B. Wallace, and M. T. Boldman, Picoliter Solder Droplet Dispension, ISHMSymp. 92 Proc, pp. 316-321, 1992.
43. D. Poulikakos and J. Waldvogel, Heat Transfer and Fluid Dynamics in the Process of Spray Deposition, Adv. Heat Transfer, Vol. 28, pp. 1 -74, 1996.
44. M. Gremaud, Solidification rapide: Etude microstructurale des alliages Al-Fe après fusion superficielle par laser, Ph.D thesis. Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 1990.
45. D. Turnbull, On the Relation Between Crystallization Rate and Liquid Structure, ./. Phys. Chem., Vol. 66, pp. 609-613, 1962.
46. K. A. Jackson, Theory of Crystal Growth, in N. B. Hannay (ed.), Treatise on Solid State Chemistry, Vol. 5, pp. 233-282, Plenum, New York, 1975.
47. M. J. Aziz and W. J. Boettinger, On the Transition from Short-Range Diffusion-Limited to Collision-Limited Growth in Alloy Solidification, Acta Metall. Mater., Vol. 42, pp. 527-537, 1994.
48. T. W. Clyne, Numerical Treatment of Rapid Solidification, Metall. Trans. B, Vol. 15, pp. 369-381, 1984.
49. W. J. Boettinger and J. H. Perepezko, Fundamentals of Rapid Solidification, in S. K. Das, B. H. Kear, and C. M. Adam (eds.), Rapidly Solidified Crystalline Alloys, Metallurgical Society, Warrendale, PA, 1985.
50. W. Kurz and D. J. Fisher, Fundamentals ofSolidification, 4th ed., Trans Tech Publications, Switzerland, 1998.
51. W. W. Mullins and R. F. Sekerka, Stability of a Planar Interface During Solidification of a Dilute Binary Alloy, J. Appi. Phys., Vol. 35, pp. 444-451, 1964.
52. M. Cohen, B. H. Kear, and R. Mehrabian, Rapid Solidification Processing—An Outlook, in R. Mehrabian, B. H. Kear, and M. Cohen (eds.), Rapid Solidification Processing—Principles and Technologies II, pp. I -23, Baton Rouge, Claitor's, Baton Rouge, L A, 1980.
53. J. C. Baker and J. W. Cahn, Thermodynamics of Solidification, in A S M Metal Park (eds.), Solidification, pp. 23-58, OH, 1971.
54. W. J. Boettinger, Growth Kinetic Limitations during Rapid Solidification, in B. H. Kear, B. C. Giessen, and M. Cohen (eds.), Rapidly Solidified Amorphous and Crystalline Alloys, Elsevier Science, New York, 1982.
55. W. J. Boettinger and S. R. Coriell, Microstructure Formation in Rapidly Solidified Alloys, in P. R. Sahm, H. Jones, and C. M. Adam (eds.), Science and Technology ofthe UndercooledMelt, Vol. 114, pp. 81-108, NATO A S I Series E, M. Nijhoff, Dordrecht, 1986.
56. M. J. Aziz, Model for Solute Redistribution during Rapid Solidification, J. Appi. Phys., Vol. 53, pp. 1158-1168, 1982.
57. K. A. Jackson and J. D. Hunt, Lamellar and Rod Eutectic Growth, Trans. TMS-A1ME, Vol. 236, pp. 1129-1142, 1966.
58. R. M. Jordan and J. D. Hunt, Interface Undercoolings during the Growth of Pb-Sn Eutectics, Metall. Trans., Vol. 3, pp. 1385-1390, 1972.
59. W. J. Boettinger, F. S. Biancanello, G. M. Kalonji, and J. W. Cahn, Eutectic Solidification and the Formation of Metallic Glasses, in R. Mehrabian, B. H. Kear, and M. Cohen (eds.), Rapid Solidification Processing—Principles and Technologies II, pp. 50-55, Baton Rouge, Claitor's, Baton Rouge, L A, 1980.
60. R. Triviedi, P. Magnin, and W. Kurz, Theory of Eutectic Growth under Rapid Solidification Conditions, Acta Metall, Vol. 35, pp. 971-980, 1987.
61. M. Carrard, M. Gremaud, M. Zimmermann, and W. Kurz, About the Banded Structure in Rapidly Solidified Dendritic and Eutectic Alloys, Acta Metall. Mater., Vol. 40, pp. 983-996, 1992.
62. G. - X. Wang and E. F. Matthys, Modeling of Rapid Planar Solidification of a Binary Alloy, in A S M E - H T D (ed.), Heat Mass Transfer in Mat. Processing Manuf, Vol. 261, pp. 35_44, 1993.
63. W. Liu, G. X. Wang, and E. F. Matthys, Determination of the Thermal Contact Coefficient for a Molten Droplet Impinging on a Substrate, Transport Phenomena in Mat. Processing Manuf. ASME, Vol. 196, 1992.
64. M. Prates and H. Biloni, Variables Affecting the Nature of the Chill Zone, Metall. Trans., Vol. 3, pp. 1501-1510, 1972.
65. M. Pasandideh-Fard and J. Mostaghimi, On the Spreading and Solidification of Mollen Particles in a Plasma Spray Process: Effect of Thermal Contaci Resistance, Plasma Chem. Plasma Processing, Vol. 16, pp. 83-98, 1996.
66. B. Xiong, C. M. Megaridis, D. Poulikakos, and H. Hoang, An Investigation of Key Factors Affecting Solder Microdroplet Deposition, J. Heat Transfer, Vol. 120, pp. 259-270, 1998.
67. G.-X. Wang and E. F. Matthys, Numerical Modeling of Phase Change and Heat Transfer during Rapid Solidification Processes, Int. J. Heat Mass Transfer, Vol. 35, pp. 141-153, 1992.
68. W. Liu, G. X. Wang, and E. F. Matthys, Thermal Analysis and Measurements for a Molten Metal Drop Impacting on a Substrate, Int. J. Heat Mass Transfer, Vol. 38, pp. 1387-1395,1995.
69. M. Pasandideh-Fard, R. Bhola, S. Chandra, and J. Mostaghimi, Deposition of Tin Droplets on a Steel Plate: Simulations and Experiments, Int. J. HeatMass Transfer, Vol. 41, pp. 2929-2945, 1998.
70. S. Inada, Transient Heat Transfer from a Free-Falling Molten Drop of Lead to a Cold Plate, J. Chem. Eng. Japan, Vol. 21, pp. 582-588, 1988.
71. M. Bertagnolli, M. Marchese, and G. Jacucci, Modeling of Particles Impacting on a Rigid Substrate under Plasma Spraying Conditions, J. Therm. Spray Tech., Vol. 4, pp. 41-49, 1995.
72. K. S. Schmaltz and C. H. Anion, Thermal Issues in Microcasting Shape Deposition Manufacturing, in E. F. Matthys and W. G. Truckner (eds.), Melt Spinning, Strip Casting and Slab Casting, pp. 125-143, Minerals, Metals and Materials Society, Warrendale, PA, 1996.
73. J. W. Christian, The Theory of Transformations in Metals and Alloys, 2nd ed., Pergamon Press, Oxford, 1975.
74. D. Turnbull and J. C. Fisher, Rate of Nucleation in Condensed Systems, J. Chem. Phys., Vol. 17, pp. 71-73, 1949.
75. K. F. Kelton, A. L. Greer, and C. V. Thomson, Transient Nucleation in Condensed Systems, J. Chem. Phys., Vol. 79, pp. 6261-6276, 1983.
76. D. R. Uhlmann, Nucleation, Crystallization, and Glass Forming Systems, Mat. Sci. Res., Vol. 4, pp. 172-197, Plenum, New York, 1969.
77. T. Ilda and R. I. L. Guthrie, The Physical Properties ofLiquid Metals, Oxford University Press, Oxford, New York, 1988.
78. W. Hofmeister, R. J. Bayuczick, G. Trapaga, D. M. Matson, and M. C. Flemings, Observation of Thermal Profiles during Impact and Solidification of Nickel Droplets, in S. P. Marsh, J. A. Dantzig, R. Triviedi, W. Hofmeister, M. G. Chu, E. J. Lavernia, and J. H. Chun (eds.), Solidification 1998, pp. 375-387, Minerals, Metals and Materials Society, Warrendale, PA, 1998.
79. D. Kashchiev, Solution of the Non-Steady State Problem in Nucleation Kinetics, Surface Sci., Vol. 14, pp. 209-220, 1969.
80. K. F. Kelton and A. L. Greer, Transient Nucleation Effects in Glass Formation, J. Noncrystalline Solids, Vol. 79, pp. 295-309, 1986.
81. J. P. Hirth, Nucleation, Undercooling and Homogeneous Structures in Rapidly Solidified Powders, Metall. Trans. A, Vol. 9, pp. 401-404, 1978.
82. E. Gutierrez-Miravete, Mathematical Modeling of Rapid Solidification, in T. S. Srivatsan and T. S. Sudarshan (eds.), Rapid Solidification Technology, Technomic, Lancaster, PA, 1993.
83. D. R. Uhlmann, A Kinetic Treatment of Glass Formation, J. Noncrystalline Solids, Vol. 7, pp. 337-348, 1972.
84. J. R. Davis, G. M. Davidson, S. R. Lampman, T. B. Zorc, J. Daquila, A. W. Ronke, and K. L. Henniger, Heat Treating, ASM Handbook, Vol. 4, A S M International, 1991.
85. P. G. Höckel, H. Sieber, and J. H. Perepezko, Heterogeneous Nucleation during Solidification of Droplets, in S. P. Marsh, J. A. Dantzig, R. Triviedi, W. Hofmeister, M. G. Chu, E. J. Lavernia, and J. H. Chun (eds.), Solidification ¡998, pp. 289-303, Minerals, Metals and Materials Society, Warrendale, PA, 1998.
86. C. A. Chen, J. H. Sahu, J. H. Chun, and T. Ando, Spray Forming with Uniform Droplets, in M. A. Otooni (ed.), Science and Technology Rapid Solidification and Processing, pp. 123-134, Kluwer Academic, Norwell, MA, 1995.
87. S. Schiaffino and A. A. Sonin, Motion and Arrest of a Molten Contact Line on a Cold Surface: An Experimental Study, Phys. Fluids, Vol. 9, pp. 2217-2226, 1997.
88. S. Schiaffino and A. A. Sonin, On the Theory for the Arrest of an Advancing Molten Contact Line on a Cold Solid of the Same Material, Phys. Fluids, Vol. 9, pp. 2227-2233, 1997.
89. S. Schiaffino and A. A. Sonin, Formation and Stability of Liquid and Molten Beads on a Solid Surface, J. Fluid Mech., Vol. 343, pp. 95-110, 1997.
90. R. L. Hoffmann, A Study of the Advancing Interface. I. Interface Shape in Liquid-Gas Systems, J. Coll. Inter. Sci., Vol. 50, pp. 228-241, 1975.
91. L. H. Tanner, The Spreading of Silicone Oil Drops on Horizontal Surfaces, J. Phys. D: Appi. Phys; Vol. 12, pp. 1473-1484, 1979.
92. O. V. Voinov, Hydrodynamics of Wetting, Fluid Dynamics, Vol. 11, pp. 714-721, 1976.
93. D. M. Anderson and S. H. Davis, Local Fluid and Heat Flow Near Contact Lines, /. Fluid Mech., Vol. 268, pp. 231-265, 1994.
94. J. M. Waldvogel, Transport Phenomena and Solidification in Picoliter Solder Droplet Deposition, Ph.D. thesis, University of Illinois at Chicago, Chicago, 1995.
95. W. Kurz, J. P. Mercier, and G. Zambelli, Traitédes matériaux, 2nd ed., Vol. 1, Presses Polytechniques et Universitaires Romandes, Lausanne, Switzerland, 1991.