Heat Transfer and Fluid Dynamics in the Process of Spray Deposition

Advances in Heat Transfer

Volumn 28, Issue C, 1996, Pages 1-74

  Poulikakos, Dimos ^a   Waldvogel, John M ^b  

^a ETH ZURICH   (Switzerland)

^b MOTOROLA INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77956754789     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2717(08)70139-4     Document Type: Article

References (87)

1. Szekely J. Can advanced technology save the U.S. steel industry?. Sci. Am. 257 (1987) 34-41
2. Annavarapu S., Apelian D., and Lawley A. Spray casting of steel strip: Process analysis. Metall. Trans. A 21A (1990) 3237-3256
3. Sirignano W.A. 1992 Freeman Scholar Lecture: Fluid dynamics of sprays. J. Fluids Eng. 115 (1992) 345-378
4. Megaridis C. Presolidification liquid metal cooling under convective conditions. Atomization Sprays 3 (1993) 171-191
5. Reid R.C., Prausnitz J.M., and Sherwood T.K. The Properties of Gases and Liquids (1977), McGraw-Hill, New York
6. Boyer H.E., and Gall T.L. Metals Handbook (1985), American Society for Metals, Metal Park, OH
7. Clift R., Grace J.R., and Weber M.E. Bubbles, Drops and Particles (1978), Academic Press, San Diego, CA
8. Dubroff W. Semiannual Program Report to DOE: Development of a Spray-Forming Process for Steel (1990), Idaho National Engineering Laboratory Program Coordinato
9. Froes F.H., Suryanarayana C., Lavernia E., and Bobeck G.E. Innovations in light metals synthesis for the 1990s. SAMPE Q. 22 (1991) 11
10. Dubroff W. Semiannual Program Report to DOE: Development of a Spray-Forming Process for Steel (1989), Idaho National Engineering Laboratory Program Coordinato
11. Ranz W.E., and Marshall W.R. Evaporation from drops I and II. Chem. Eng. Prog. 48 (1952) 141-146 173-180
12. Gutierrez-Miravete E., Lavernia E.J., Trapaga G.M., Szekely J., and Grant N.J. Mathematical model of the spray deposition process. Metall. Trans., A 20A (1989) 71-85
13. Lavernia E.J., Gutierrez E.M., Szekely J., and Grant N.J. A mathematical model for the liquid dynamic compaction process. Part 1: Heat flow in gas atomization. Int. J. Rapid Solidif. 4 (1988) 89-124
14. Kurten H., Raasch J., and Rumpf H. Chem-Ing. Tech. 38 (1966) 941-948
15. Figliola R.S., Anderson I.E., Molnar D., and Morton H. Flow mechanisms affecting rapid solidification in high pressure gas atomization. HTD [Publ.] (Am. Soch. Mech. Eng.) 111 (1989) 7-12
16. Crowe C.T., Babcock W.R., and Willoughby P.G. Drag coefficients for particles in rarefied low Mach number flows. Prog. Heat and Mass Transfer 6 (1972) 419-431
17. Carlson D.J., and Hoglund R.F. Particle drag and heat transfer in rocket nozzles. AIAA J. 2 (1964) 1980-1984
18. Whitaker S. Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres and flow in packed beds and tube bundles. AIChE J. 18 (1972) 361 171
19. Bejan A. Heat Transfer (1993), Wiley, New York 268
20. Veistinen M., Lavernia E.J., Baram J., and Grant N.J. Jet behavior during ultrasonic gas atomization. Int. J. Powder Metall. 25 (1988) 89-92
21. Veistinen M., Lavernia E.J., Abinante M., and Grant N.J. Jet behavior during ultrasonic gas atomization. Mater. Lett. 5 (1987) 373-379
22. Backmark U., Backstorm, N., and Arnberg, L. (1985). Swedish Institute for Metals Research, Stockholm.
23. Beattle J.A., and Julien H.P. Ind. Eng. Chem. 46 (1954) 1668-1669
24. Levi C.G., and Mehrabian R. Heat flow during rapid solidification of undercooled metal droplets. Metall. Trans., A 13A (1982) 221-234
25. Clyne T.W. Numerical treatment of rapid solidification. Metall. Trans., B 15B (1984) 369-381
26. Wilson H.A. Philos. Mag. [5] 50 (1990) 238-246
27. Frenkel J. Phys. Z. Sowjetunion 1 (1932) 498-503
28. Cahn J.W., Hillig W.B., and Sears G.W. Acta Metall. 12 (1964) 914-922
29. Bayazitoglu Y., and Cerny R. Solidification of spherical metal drops in metal powder production. J. Mater. Process. Manuf. Sci. 2 (1993) 51-61
30. Biancaniello F.S., Espina P.I., Mattingly G.E., and Ridder S.D. A flow visualization study of supersonic inert gas-metal atomization. Mater. Sci. Eng., A 119 (1989) 161-168
31. Biancaniello F.S., Conway J.J., Espina P.I., Mattingly G.E., and Ridder S.D. Particle size measurement of inert-gas-atomized powder. Mater. Sci. Eng., A 124 (1990) 9-14
32. Biancaniello F.S., Presser C., and Ridder S.D. Real-time particle size analysis during inert gas atomization. Mater. Sci. Eng., A 124 (1990) 21-29
33. Lubanska H. J. Met. 22 (1970) 45-49
34. Rai G., Lavernia E.J., and Grant N.J. J. Met. 37 (1985) 22-26
35. ASTM Subcommittee E29.04 on Liquid Particle Measuremen. (1992). ASTM Standards on Liquid Particles and Sprays, PCN 03-529092-41. ASTM, Philadelphia.
36. Ando T., Tsao C.-Y., Wahlroos J., and Grant N.J. Analysis and control of gas atomization rate. Int. J. Powder Metall. (Princeton, N.I.) 26 (1990) 311-318
37. Geiger G.P., and Poirer D.R. Transport Phenomena in Metallurgy (1980), Addison-Wesley, Reading, MA
38. Ayers J.D., and Anderson I.E. Very fine metal powders. J. Met. 37 (1987) 16
39. Couper N.J., and Singer R.J. In: Seeb S., and Warlimont H. (Eds). Rapidly Quenched Metals (1984), North-Holland Publ., Amsterdam 1737
40. Jones H. Rapid Solidification of Metals and Alloys (1983), Institution of Metallurgists, London 43
41. Mathur P.C., Apelian D., and Lawley A. Acta Metall. 37 (1989) 429-443
42. Mathur, P.C. (1988). Ph.D. Thesis, Drexel University, Philadelphia.
43. Bennett T., and Poulikakos D. Splat-quench solidification: Estimating the maximum spreading of a droplet impacting a solid surface. J. Mater. Sci. 28 (1993) 963-970
44. Madejski J. Int. J. Heat Mass Transfer 18 (1976) 1009-1013
45. Collings E.W., Markworth A.J., McCoy J.K., and Saunders J.H. J. Mater. Sci. 25 (1990) 3677-3682
46. Chandra S., and Avedisian C.T. On the collision of droplet with a solid surface. Proc. R. Soc. London, Ser. A 432 (1991) 13 (1991)
47. Jones H. Splat cooling and metastable phases. Rep. Prog. Phys. 48 (1973) 1425-1497
48. Anantharaman T.R., and Suryanarayana C. Review: A decade of quenching from the melt. J. Mater. Sci. 6 (1971) 1111-1135
49. Madejski J. Int. J. Heat Mass Transfer 26 (1983) 1095-1098
50. Wang G.-X., and Matthys E.F. Modelling of heat transfer and solidification during splat cooling: Effect of splat thickness and splat substrate thermal contact. Int. J. Rapid Solidif. 6 (1991) 141-174
51. Wang G.-X., and Matthys E.F. Numerical modelling of phase change and heat transfer during rapid solidification processes: Use of control volume integrals with element subdivisions. Int. J. Heat Mass Transfer 35 (1992) 141-153
52. Wang G.-X., and Matthys E.F. Int. J. Rapid Solidif. 6 (1991) 297-324
53. Shingu P.H., and Ozaki R. Solidification rate in rapid conduction cooling. Metall. Trans., A 6A (1975) 33-37
54. Rosner D.E., and Epstein M. Simultaneous kinetic and heat transfer limitations in the crystallization of highly undercooled melts. Chem. Eng. Sci. 30 (1975) 511-520
55. Evans P.V., and Greer A.L. Modeling of crystal growth and solute redistribution during rapid solidification. Mater. Sci. Eng. 98 (1988) 357-361
56. Bennett T., and Poulikakos D. Heat transfer aspects of splat-quench solidification: Modeling and experiment. J. Mater. Sci. 29 (1994) 2025-2039
57. Fukai J., Zhao Z., Poulikakos D., Megaridis C., and Miyatake O. Modelling of the deformation of a liquid droplet impinging upon a flat surface. Phys. Fluids A 5 (1993) 2588-2599
58. Fukai J., Shiiba Y., Yamamoto T., Miyatake O., Poulikakos D., Megaridis C.M., and Zhao Z. Wetting effects on the spreading of a liquid droplet colliding with a flat surface: Experiment and modeling. Phys. Fluids A 7 (1995) 236-247
59. Trapaga G., and Szekely J. Mathematical modeling of the isothermal impingement of liquid droplets in spray processes. Metall. Trans. B 22 (1991) 901-914
60. Liu H., Lavernia E.J., and Rangel R. Numerical investigation of micropore formation during substrate impact of molten droplets in plasma spray processes. Atomization Sprays 4 (1994) 369-384
61. Lui, H., Lavernia, E.J., and Rangel, R.H. (1994). Modeling of molten droplet impingement on a non-flat surface. Int. Mech. Eng. Congr. Exhib. Winter Ann. Meet. Chicago, 1994.
62. Marchi S.C., Lui H., Sickinger A., Muhleberg E., Lavernia E.J., and Rangel R.H. Numerical analysis of the deformation and solidification of a single droplet impinging onto a flat substrate. J. Mater. Sci. 28 (1993) 3313-3321
63. Tsurutani K., Yao M., Senda J., and Fujimoto H. Numerical analysis of the deforming process of a droplet impinging on a wall. JSME Int. J. [2] 33 (1990) 555-561
64. Bach P., and Hassager O. An algorithm for the use of the Lagrangian specification in Newtonian fluid mechanics and applications to free surface flow. J. Fluid Mech. 152 (1985) 173
65. Hirt C.W., and Nichols B.D. Adding limited compressibility to incompressible hydrocodes. J. Comp. Physiol. 34 (1980) 390
66. Zienkiewicz O.C., and Taylor R.L. The Finite Element Method. 4th ed. 2 (1991), McGraw-Hill, London 513-514
67. Kawahara M., and Hirano H. A finite element method for high Reynolds number viscous fluid flow using two step explicit scheme. Int. J. Numer. Methods Fluids 3 (1983) 137
68. Zienkiewicz O.C., and Taylor R.L. The Finite Element Method. 4th ed. 1 (1989), McGraw-Hill, London 206-215
69. Haley P.J., and Miksis M.J. The effect of the contact line on droplet spreading. J. Fluid Mech. 223 (1991) 57
70. Huh E., and Scriven L.E. Hydrodynamic model of steady movement of a solid liquid fluid contact line. J. Colloid Interface Sci. 35 (1971) 85
71. Dussan E.B., and Davis V.S. On the motion of a fluid-fluid interface along a solid surface. J. Fluid Mech. 65 (1974) 71
72. Dussan E.B. On the spreading of liquids on solid surfaces: Static and dynamic contact lines. Annu. Rev. Fluid Mech. 11 (1979) 371
73. Silliman W.J., and Scriven L.E. Separating flow near a static contact line: Slip at a wall and shape of a free surface. J. Comp. Physics 34 (1980) 287
74. Hocking L.M., and Rivers A.D. The spreading of a drop by capillary action. J. Fluid Mech. 121 (1982) 425
75. Sheng P., and Zhou M. Immiscible-fluid displacement: Contact-line dynamics and the velocity-dependent capillary pressure. Phys. Rev. 45 (1992) 5694
76. Leger L., and Joanny J.F. Liquid spreading. Rep. Prog. Phys. 25 (1992) 431
77. Zhao Z., Poulikakos D., and Fukai J. Heat transfer and fluid dynamics during the collision of a liquid droplet on a substrate: Part II-modeling. Int. J. Heat Mass Transfer (1996) (in press)
78. Zhao Z., Poulikakos D., and Fukai J. Heat transfer and fluid dynamics during the collision of a liquid droplet on a substrate: Part II-Experiments. Int. J. of Heat Mass Transfer (1996) (in press)
79. Moreau, C., Cielo, P., Lamontagne, M., Dallaire, S., Krapez, J.-C., and Vardelle, M. (1990). Temperature evolution of plasma sprayed niobium particles impacting on a substrate. Proc. Nat. Therm. Spray Confer. 3rd, Long Beach, CA, pp. 19-26.
80. Waldvogel, J., and Poulikakos, D. (1996). Solidification of picoliter size solder droplets impacting on a substrate. In preparation.
81. Kang B., Zhao Z., and Poulikakos D. Solidification of liquid metal droplets impacting sequentially on a substrate. J. Heat Transfer 116 (1994) 436-445
82. Gutierrez-Miravete E., Lavernia E.J., Trapaga G.M., and Szekely J. A mathematical model for the liquid dynamic compaction process. Part 2: Formation of the deposit. Int. J. Rapid Solidif. 4 (1988) 125-150
83. Gillen A.G., Mathur P.G., Apelian D., and Lawley A. Prog. Powder Metall. 42 (1986) 753-773
84. Flemings M.C. Solidification Processing (1974), McGraw-Hill, New York
85. Martin H. In: Hartnett J.P., and Irvine T.F. (Eds). Advances in Heat Transfer 13 (1977), Academic Press, New York
86. Frigaard I.A. Growth dynamics of spray formed aluminium billets. Part 1: Steady state crown shapes. J. Mater. Process. Manuf. Sci. 3 (1995) 173-193
87. Frigaard I.A. Growth dynamics of spray formed aluminium billets. Part 1: Transient billet growth. J. Mater. Process. Manuf. Sci. 3 (1995) 257-275