Fretting in aerospace structures and materials

ASTM Special Technical Publication

Volumn , Issue 1367, 2000, Pages 523-537

  Farris, T N ^a   Szolwinski, M P ^b   Harish, G ^a  

^a Purdue University   (United States)

^b RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; AIRCRAFT MATERIALS; ALUMINUM ALLOYS; FATIGUE TESTING; FRETTING CORROSION; TITANIUM ALLOYS;

FRETTING FATIGUE; STRUCTURAL INTEGRITY;

FATIGUE OF MATERIALS;

EID: 0033879192     PISSN: 10403094     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp14752s     Document Type: Conference Paper

References (39)

1. Kuhn, P., "Fatigue Engineering in Aircraft," Fatigue in Aircraft Structures, A. M. Freudenthal, Ed., Academic Press, New York, 1956, pp. 295-316.
2. Swift, T., "Development of the Fail-Safe Design Features of the DC-10," Damage Tolerance in Aircraft Structures, ASTM STP 486, American Society for Testing and Materials, Philadelphia, 1971, pp. 164-214.
3. Committee on Aging of U. S. Air Force Aircraft, "Aging of U. S. Air Force Aircraft," National Research Council, Washington, DC, 1997.
4. Piascik, R. S. and Willard, S. A., "The Characteristics of Fatigue Damage in the Fuselage Riveted Lap Splice Joint," NASA/TP-97-206257, NASA Langley Research Center, Hampton, VA, 1997.
5. Müller, R. P. G., "An Experimental and Analytical Investigation on the Fatigue Behavior of Fuselage Riveted Lap Joints," Ph.D., Delft University of Technology, The Netherlands, 1995.
6. Hoeppner, D. W., Elliot, C. B., III, and Moesser, M. W., "The Role of Fretting Fatigue on Aircraft Rivet Hole Cracking," DOT/FAA/AR-96/10, Federal Aviation Administration, Salt Lake City, UT, 1996.
7. Szolwinski, M. P., Harish, G., McVeigh, P. A., and Farris, T. N., "Experimental Study of Fretting Crack Nucleation in Aerospace Alloys with Emphasis on Life Prediction," Fretting Fatigue: Current Technology and Practices, ASTM STP 1367, D. W. Hoeppner, V. Chandrasekaran, and C. B. Elliott, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1999, this volume.
8. Harris, W. J., Metallic Fatigue, Pergamon Press, New York, NY, 1961.
9. Heywood, R. B., Designing Against the Fatigue of Metals, Jarrold and Sons, Norwich, Great Britain, 1962.
10. Waterhouse, R. B. and Taylor, D. E., "The Initiation of Fatigue Cracks in a 0.7% Carbon Steel by Fretting," Wear, Vol. 17, 1971, pp. 139-147.
11. Nishioka, K., Nishimura, S., and Hirakawa, K., "Fundamental Investigations of Fretting Fatigue, Part 1," Bulletin of JSME, Vol. 11, No. 45, 1968, pp. 437-445.
12. Endo, K. and Goto, H., "Initiation and Propagation of Fretting Fatigue Cracks," Wear, Vol. 38, 1976, pp. 311-324.
13. Alic, J. A., Hawley, A. L., and Urey, J. M., "Formation of Fretting Fatigue Cracks in 7075-T7351 Aluminum Alloy," Wear, Vol. 56, 1979, pp. 351-361.
14. Thomson, D., "The National High Cycle Fatigue (HCF) Program," in 3rd National Turbine Engine High Cycle Fatigue (HCF) Conference, San Antonio, TX, Universal Technology Corp., 1998, CD-ROM proceedings.
15. Ruiz, C., Boddington, P. H. B., and Chen, K. C., "An Investigation of Fatigue and Fretting in a Dovetail Joint," Experimental Mechanics, Vol. 24, No. 3, 1984, pp. 208-217.
16. Hartman, A., "The Influence of Manufacturing Procedures on the Fatigue Life of 2024-T3 Alclad Riveted Single Lap Joints," NLR TR 68072 U, Nationaal Lucht-En Ruimtevaartlaboratorium (NLR), The Netherlands, 1968.
17. Iyer, K., Hahn, G. T., Bastias, P. C., and Rubin, C. A., "Analysis of Fretting Conditions in Pinned Connections," Wear, Vol. 181-183, 1995, pp. 524-530.
18. Szolwinski, M. P. and Farris, T. N., "Mechanics of Fretting Fatigue Crack Formation," Wear, Vol. 198, 1996, pp. 93-107.
19. McVeigh, P. A. and Farris, T. N., "Finite Element Analysis of Fretting Stresses," Journal of Tribology, Vol. 119, No. 4, 1997, pp. 797-801.
20. Szolwinski, M. P. and Farris, T. N., "Fretting Fatigue Crack Initiation: Aging Aircraft Concerns," in 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference-Part 4, Hilton Head, NC, AIAA, 1994, pp. 2173-2179, AIAA-94-1591-CP.
21. Nowell, D. and Hills, D. A., "Mechanics of Fretting Fatigue Tests," International Journal of Mechanical Sciences, Vol. 29, No. 5, 1987, pp. 355-365.
22. Endo, K., Goto, H., and Fukunaga, T., "Behaviors of Factional Force in Fretting Fatigue," Bulletin of the JSME, Vol. 17, No. 108, 1974, pp. 647-654.
23. Rooke, D. P. and Courtney, T. J., "The Effect of Final Friction Coefficient on Fretting Fatigue Waveforms," Fatigue and Fracture of Engineering Materials and Structures, Vol. 12, No. 3, 1989, pp. 227-236.
24. Vincent, L., "Materials and Fretting," Fretting Fatigue, R. B. Waterhouse and T. C. Lindley, Eds., Mechanical Engineering Publications, London, 1994, pp. 323-337.
25. Hills, D. A. and Nowell, D., Mechanics of Fretting Fatigue, Kluwer, Dordrecht, Netherlands, 1994.
26. Szolwinski, M. P. and Farris, T. N., "Observation, Analysis and Prediction of Fretting Fatigue in 2024-T351 Aluminum Alloy," Wear, Vol. 221, No. 1, 1998, pp. 24-36.
27. Szolwinski, M. P., Harish, G., Farris, T. N., and Sakagami, T., "In-Situ Measurement of Near-Surface Fretting Contact Temperatures in an Aluminum Alloy," Journal of Tribology, Vol. 121, No. 1/2, 1999, pp. 11-19/340.
28. Szolwinski, M. P. and Farris, T. N., "Linking Riveting Process Parameters to the Fatigue Performance of Riveted Aircraft Structures," Journal of Aircraft, 1999, accepted for publication.
29. Harish, G., Szolwinski, M. P., Harish, G., Farris, T. N., and Sakagami, T., "Evaluation of Fretting Stresses Through Full-Field Temperature Measurements," Fretting Fatigue: Current Technology and Practices, ASTM STP 1367, D. W. Hoeppner, V. Chandrasekaran, and C. B. Elliott, Eds., American Society for Testing and Materials, West Conshohocken, PA, 1999, this volume.
30. Petiot, C., et al., "An Analysis of Fretting-Fatigue Failure Combined with Numerical Calculations to Predict Crack Nucleation," Wear, Vol. 181-183, 1995, pp. 101-111.
31. Fellows, L. J., Nowell, D., and Hills, D. A., "On the Initiation of Fretting Fatigue Cracks," Wear, Vol. 205, 1997, pp. 120-129.
32. Fawaz, S. A., "Fatigue Crack Growth in Riveted Joints," Ph.D. Thesis, Delft University, The Netherlands, 1997.
33. Harish, G. and Farris, T. N., "Shell Modeling of Fretting in Riveted Lapjoints," AIAA Journal, Vol. 36, No. 6, 1998, pp. 1087-1093.
34. Beuth, J. L. and Hutchinson, J. W., "Fracture Analysis of Multi-Site Cracking in Fuselage Lap Joints," Computational Mechanics, Vol. 13, 1994, pp. 315-331.
35. Park, J. H. and Atluri, S. N., "Fatigue Growth of Multiple-Cracks Near a Row of Fastener-Holes in a Fuselage Lap Joint," Computational Mechanics, Vol. 13, 1993, pp. 189-203.
36. Fung, C. P. and Smart, J., "An Experimental and Numerical Analysis of Riveted Single Lap Joints," Journal of Aerospace Engineering, Vol. 208, 1994, pp. 79-90.
37. Barber, J., Elasticity, Kluwer, Dordrecht, The Netherlands, 1992.
38. Szolwinski, M. P., Harish, G., and Farris, T. N., "The Development and Validation of Design-Oriented Metrics for Fretting Fatigue in Titanium Engine Components," in IMECE Symposium on Mechanical Behavior of Advanced Materials, Anaheim, CA, American Society of Mechanical Engineers, 1998, MD-Vol. 84, pp. 11-18.
39. Ciavarella, M., Hills, D. A., and Monno, G., "The Influence of Rounded Edges on Indentation by a Flat Punch," Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Vol. 212, No. 4, 1998, pp. 319-328.