Spray drying and pharmaceutical applications

Handbook of Pharmaceutical Granulation Technology

Volumn , Issue , 2016, Pages 98-125

  Celik, Metin ^a,b   Wendell, Susan C ^c  

^a Pharmaceutical Technologies International Inc ^*  (United States)

^b NEAR EAST UNIVERSITY   (Turkey)

^c JOHNSON AND JOHNSON   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85131208226     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (73)

1. Traub DA. Spray dryers. Part 1. Process heating, August 2001. Available at: http://www.process-heating.com/CDA/ArticleInformation/Drying_Files_Item/0,3274,61137,00.html.
2. Percy SR. Improvement in drying and concentrating liquid substances by atomizing, U.S. Patent 125,406. 9 April 1872.
3. Masters K. Introduction. Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:1-20.
4. Parikh DM. Advances in spray drying technology: new applications for a proven process. Am Pharm Rev 2008; 11(1):34-41.
5. Traub DA. Spray dryers. Part 2. Process heating, September 2001. Available at: http://www.process-heating.com/CDA/ArticleInformation/Drying_Files_Item/0,3274,63175,00.html.
6. Masters K. Spray drying fundamentals: process stages and layouts. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:24.
7. Masters K. Spray drying fundamentals: process stages and layouts. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:26.
8. Masters K. The process stages of spray drying. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:268.
9. Masters K. Spray drying fundamentals: process stages and layouts. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:31.
10. Masters K. The process stages of spray drying. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:271.
11. Masters K. Spray drying fundamentals: process stages and layouts. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:43.
12. Masters K. Spray drying fundamentals: process stages and layouts. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:47.
13. Masters K. The process stages of spray drying. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:199.
14. Masters K. The process stages of spray drying. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:255.
15. Masters K. Drying of droplets/sprays. In: Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:309.
16. Traub DA. The drying curve. Part 2. Process heating, October 2002. Available at: http://www.process-heating.com/CDA/ArticleInformation/Drying_Files_Item/0,3274,84744,00.html.
17. Masters K. Drying of droplets/sprays. Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:326.
18. Charlesworth DA, Marshall WR. Evaporation for drops containing dissolved solids. AIChE J 1960; 6(1): 9-23.
19. Masters K. Drying of droplets/sprays. Spray Drying Handbook. 5th ed. Essex: Longman Scientific Technical, 1991:345.
20. Adhikari B, Howes T, Lecomte D, et al. A glass transition temperature approach for the prediction of the surface stickiness of a drying droplet during spray drying. Powder Technol 2005; 149:168-179.
21. Shaw F. Spray drying as a granulation technique. In: Parikh DM, ed. Handbook of Pharmaceutical Granulation Technology. New York: Marcel Dekker, 1997:93-96.
22. Filkova I, Weberschinke J. Apparent viscosity of non-Newtonian droplet on the outlet of wheel atomizers. In: Mujumdar AS, ed. Drying '82. New York: McGrawHill, 1982:165-170.
23. Broadhead J, Rouan SK, Rhodes CT. The spray drying of pharmaceuticals. Drug Dev Ind Pharm 1992; 18(11-12):1169-1206.
24. Wendel SC, Celik M. An overview of spray-drying applications. Pharm Technol 1997; 21(10):124-156.
25. Kadam KL. Granulation Technology for Bioproducts. Boca Raton: FL CRC Press, 1990.
26. Fincher JH. Particle size of drugs and its relationship to absorption and activity. J Pharm Sci 1968; 57(11):1825-1835.
27. Kostewicz ES, Wunderlich M, Brauns U, et al. Predicting the precipitation of poorly soluble weak bases upon entry in the small intestine. J Pharm Pharmacol 2004; 56:43-51.
28. Kawashima Y, Satio M, Takenaka H. Improvement of solubility and dissolution rate of poorly water-soluble salicylic acid by a spray-drying technique. J Pharm Pharmacol 1975; 27:1-5.
29. Pikal MJ, Lukes AL, Land JE, et al. Quantitative crystallinity determination for beta-lactam antibiotics by solution calorimetry: correlations with stability. J Pharm Sci 1978; 67:767-773.
30. Morris KR, Griesserb UJ, Eckhardt CJ, et al. Theoretical approaches to physical transformations of active pharmaceutical ingredients during manufacturing processes. Adv Drug Deliv Res 2001; 48: 91-114.
31. Junginger H, Wedler M. Acta Pharm Technol 1984; 30(1):68.
32. Corrigan OI, Holohan EM, Reilly MR. Physicochemical properties of indomethacin and related compounds co-spray dried with polyvinyl-pyrrolidone. Drug Dev Ind Pharm 1985; 11(2-3):677-695.
33. Corrigan DO, Healy AM, Corrigan OI. The effect of spray drying solutions of polyethylene glycol (PEG) and lactose/PEG on their physicochemical properties. Int J Pharm 2002; 235(1-2):193-205.
34. Berggren J, Alderborn G. Effect of polymer content and molecular weight on the morphology and heat- and moisture-induced transformations of spray-dried composite particles of amorphous lactose and poly(vinylpyrrolidone). Pharm Res 2003; 20:1039-1046.
35. Re MI. Microencapsulation by spray drying. Drying Technol 1998; 16(6):1195-1236.
36. Wan LS, Heng PW, Chia CG. Spray drying as a process for microencapsulation and the effect of different coating polymers. Drug Dev Ind Pharm 1992; 18(9):997-1011.
37. Sutinen R, Laasanen V, Paronen P, et al. pH-controlled silicone microspheres for controlled drug delivery. J Control Release 1995; 33:163-171.
38. Palmieri GF, Wehrle P, Stamm A. Evaluation of spray-drying as a method to prepare microparticles for controlled drug release. Drug Dev Ind Pharm 1994; 20(18):2859-2879.
39. Takeuchi H, Handa T, Kawashima Y. Controlled release theophylline with acrylic polymers prepared by spray drying technique. Drug Dev Ind Pharm 1989; 15(12):1999-2016.
40. Pavanetto F, Genta I, Giunchedi P, et al. Evaluation of spray drying as a method for polylactide and polylactide-co-glycolide microsphere preparation. J Microencapm 1993; 10(4):487-497.
41. Gonda I. Targeting by deposition. In: Hickey AJ, ed. Pharmaceutical Inhalation Aerosol Technology. New York: Marcel Dekker, Inc., 1992:61-82.
42. Corrigan DO, Corrigan OI, Healy AM. Predicting the physical state of spray dried composites: salbutamol sulphate/lactose and salbutamol sulphate/polyethylene glycol co-spray dried systems. Int J Pharm 2004; 273(1-2):171-182.
43. Vidgren P, Vidgren M, Aronen P, et al. Nasal distribution of radioactive drug administered using two dosage forms. Eur J Drug Metab Pharmacokinet 1991; 3:426-432.
44. Elversson J, Millqvist-Fureby A, Alderborn G, et al. Droplet and particle size relationship and shell thickness of inhalable lactose particles during spray drying. J Pharm Sci 2003; 92, 900-910.
45. Dunbar CA, Concessio NM, Hickey AJ. Evaluation of atomizer performance in production of respirable spray-dried particles. Pharm Dev Technol 1998; 3(4):433-441.
46. Buttinia F, Soltani A, Colombo P, et al. Multilayer PVA adsorption onto hydrophobic drug substrates to engineer drug-rich microparticles. Eur J Pharm Sci 2008; 33(1):20-28.
47. Cilurzo F, Selmin F, Minghetti P, et al. Fast-disolving mucoadhesive microparticulate delivery system containing piroxicam. Eur J Pharm Sci 2005; 24:355-361.
48. Ahuja A, Khar RP, Ali J. Muchoadhesive drug delivery systems. Drug Dev Ind Pharm 1997; 23: 489-515.
49. Lee J. Drug nano- and microparticles processed into solid dosage forms: physical properties. J Pharm Sci 2003; 92(10):2057-2068.
50. Muller-Mehnert RH, Lucks JS, Schwarz C, et al. Solid lipid nanoparticles (SLN)-alternative colloidal carrier system for controlled drug delivery. Eur J Pharm Biopharm 1995; 41(1):62-69.
51. Sham JO, Zhang Y, Finlay WH, et al. Formulation and characterization of spray-dried powders containing nanoparticles for aerosol delivery to the lung. Int J Pharm 2004; 269:457-467.
52. Goldbach P, Brochart H, Stamm A. Spray-drying of liposomes for a pulmonary administration. Part 1. Chemical stability of phospholipids. Drug Dev Ind Pharm 1993; 19(19):2611-2622.
53. Goldbach P, Brochart H, Stamm A. Spray-drying of liposomes for a pulmonary administration. Part 2. Retention of encapsulated materials. Drug Dev Ind Pharm 1993; 19(19):2623-2636.
54. Costantino HR, Andya JD, Nguyen PA, et al. Effect of mannitol crystallization on the stability and aerosol performance of a spray-dried pharmaceutical protein, recombinant humanized anti-IgE monoclonal antibody. J Pharm Sci 1998; 87:1406-1411.
55. Broadhead J, Ruan SK, Rhodes CT. The effect of process and formulation variables on the properties of spray dried B-galactosidase. J Pharm Pharmacol 1994; 46:458-467.
56. Murillo M, Gamazo C, Goni MM, et al. Development of microparticles prepared by spray-drying as a vaccine delivery system against brucellosis. Int J Pharm 2002; 242(1-2):341-344.
57. Maa YF, Nguyen PA, Sweeny T, et al. Protein inhalation powders: spray drying vs. spray freeze drying. Pharm Res 1999; 16(2)249-254.
58. Sevelle PC, Kellay LW, Birchall JC. Preparation of dry powder dispersions for non-viral gene delivery by freeze-drying and spray-drying. J Gene Med 2002; 4:428-437.
59. Maa YF, Prestrelski SJ. Biopharmaceutical powders: particle formation and formulation considerations. Curr Pharm Biotechnol 2000; 1:283-302.
60. Kim CK, Soon YS. Development of digoxin dry elixir as a novel dosage form using a spray-drying technique. J Microencap 1995; 12(5):547-566.
61. Takeuchi H, Sasaki H, Niwa T, et al. Design of redispersible dry emulsion as an advanced dosage form of oily drug (vitamin E nicotinate) by spray-drying technique. Drug Dev Ind Pharm 1992; 18(9):919-937.
62. Timmington H. Improved aspirin. Chem Drug 1973; 482-483.
63. Killen MJ. Process of spray drying and spray congealing. Pharm Eng 1993; 13:58-62.
64. Eldem T, Speiser P, Altorfer H. Polymorphic behavior of sprayed lipid micropellets and its evaluation by differential scanning calorimetry and scanning electron microscopy. Pharm Res 1991; 8:178-184.
65. Eldem T, Speiser P, Hincal A. Optimization of spray-dried and -congealed lipid micropellets and characterization of the surface morphology by scanning electron microscopy. Pharm Res 1991; 8(1):47-54.
66. Mumenthaler M, Leuenberger H. Atmospheric spray-freeze drying: suitable alternative in freeze dry technology. Int J Pharm 1991; 72:97-110.
67. Sievers RE, Huang ETS, Villa JA, et al. Low-temperature manufacturing of fine pharmaceutical powders with supercritical fluid aerosolization in a bubble dryer. Appl Chem 2001; 73(8):1299-1303.
68. Sievers RE, Karst U. Methods for fine particle formation. U.S. Patent 5,639,441, June 1997.
69. Sievers RE, Karst U. Methods and apparatus for fine particle formation. U.S. Patent 6,095,134, August 2000.
70. Sievers RE, Karst U, Milewski PD, et al. Formation of aqueous small droplet aerosols assisted by supercritical carbon dioxide. Aerosol Sci Technol 1999; 30:3-15.
71. U.S. Department of Health and Human Services, Food and Drug Administration, Center for Drug Evaluation and Research (CDER), Center for Veterinary Medicine (CVM), Office of Regulatory Affairs (ORA). Guidance for industry: PAT-a framework for innovative pharmaceutical development, manufacturing, and quality assurance. September 2004.
72. Chan L, Tan L, Heng P. Process analytical technology: application to particle sizing in spray drying. AAPS Pharm Sci Technol 2008; 9(1):259-266.
73. Billon A, Bataille B, Cassanas G, et al. Development of spray-dried acetaminophen microparticles using experimental designs. J Pharm Int 2000; 203(1-2):159-168.