Reinforced concrete design with FRP composites

Reinforced Concrete Design with FRP Composites

Volumn , Issue , 2006, Pages 1-382

  GangaRao, Hota V S ^a   Taly, Narendra ^a   Vijay, P V ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85127961218     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (416)

1. Ball, P., Designing the Molecular World, Princeton, NJ: Princeton University Press, 1994.
2. Benjamin, B.S., Structural Design with Plastics, New York: Van Nostrand Reinhold Co., 1982.
3. CFI, Composites for Infrastructure, Wheatridge, CO: Ray Publishing, 1998.
4. Chawla, K.K., Composite Materials: Science and Engineering, New York: Springer-Verlag, 1987.
5. Emsley, J., Molecules at an Exhibition, Oxford: Oxford University Press, 1998.
6. EUROCOMP, Structural design of polymer composites, in EUROCOMP Design Code and Handbook, J.L. Clarke (Ed.), London: E & FN Spon, 1996.
7. Gay, D., Hoa, S.V., and Tsai, S.W., Composite Materials: Design and Applications, Boca Raton, FL: CRC Press, 2003.
8. Harper, C.A., Petrie, E.M., Plastic Materials and Processes: A Concise Encyclopedia, New York: Wiley Interscience, 2003.
9. Herakovich, C.T., Mechanics of Fibrous Composites, New York: John Wiley & Sons, 1998.
10. Hollaway, L.C., Leeming, M.B., Strengthening of Reinforced Concrete Structures Using Externally-Bonded FRP Composites in Structural and Civil Engineering, Boca Raton, FL: CRC Press, 1999.
11. Katz, H.S., Milewski, J.V. (Eds.), Handbook of Fillers and Reinforcements for Plastics, New York: Van Nostrand Reinhold Co., 1978.
12. Kaw, A.K., Mechanics of Composites Materials, Boca Raton, FL: CRC Press, 1997.
13. Lubin, G. (Ed.), Handbook of Composites, New York: Van Nostrand Reinhold Co., 1982.
14. Mallick, P.K., Fiber Reinforced Composite Materials: Manufacturing and Design, New York:Marcel Dekker, 1993.
15. Marshall, A., Composite Basics Seven, Walnut Creek, CA: Marshall Consulting Co., 2005.
16. McCrum, N.G., Buckley, C.P., and Bucknall, C.P., Principles of Polymer Engineering, New York: Oxford University Press, 1988.
17. Miller, T.E. (Ed.), Introduction to Composites, 4th ed., New York: Composites Institute of the Society of Plastics Industry, 1997.
18. Mott, R.L., Applied Strength of Materials, Upper Saddle River, NJ: Prentice Hall, 2002.
19. Potter, K., An Introduction to Composite Products, New York: Chapman & Hall, 1997.
20. Rosato, D.V., An overview of composites, in Handbook of Composites, G. Lubin (Ed.), New York: Van Nostrand Reinhold Co., 1982.
21. Rosen, S., Fundamental Principles of Polymeric Materials, New York: John Wiley & Sons, 1993.
22. Schwartz, M., Composites Materials Handbook, 2nd ed., New York: McGraw-Hill Co., 1992.
23. Selinger, B., Chemistry in the Market Place, 5th ed., Marrickville, NSW, Australia: Harcourt Brace & Co. Australia, 1998.
24. Snyder, C.H., The Extraordinary Chemistry of Ordinary Things, New York: John Wiley &Sons, 2003.
25. Young, J.F., Mindess, S., Gray, R.J., and Bentur, A., The Science and Technology of Civil Engineering Materials, Upper Saddle River, NJ: Prentice Hall, 1998.
26. ACI 440.1R-03: Guide for the Design and Construction of Concrete Reinforced with FRP Bars, Detroit, Michigan: American Concrete Institute, 2003.
27. Agarwal, B., Broutman, L., Analysis and Performance of Fiber Composites, New York:John Wiley & Sons, 1990.
28. American Association of State Highways and Transportation Officials (AASHTO), Standard Specifications for Highway Bridges, 16th ed., Washington, DC, 1996.
29. American Concrete Institute (ACI), State-of-the-report on fiber-reinforced concrete, An International Symposium: Fiber-Reinforced Concrete, ACI Committee 544, Special Publication, SP-44, Farmington Hills, MI, 1974.
30. American Concrete Institute (ACI), State-of-the-report on fiber-reinforced concrete, ACI Committee 544, Report ACI 544-1R-82, Concrete International: Design and Construction (re-approved 1986), Farmington Hills, MI, 1982.
31. American Concrete Institute (ACI), Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (ACI 318R-99), ACI 318-99, Farmington Hills, MI, 1999.
32. American Concrete Institute (ACI), Cement and Concrete Technology, ACI 116R-78, ACI Committee 116, Farmington Hills, MI, 1978.
33. American Concrete Institute (ACI), Concrete International, ACI Committee 212, Chemical Admixtures, Farmington Hills, MI, 3, 5, 1981.
34. American Concrete Institute (ACI), Proc. ACI Journal, ACI Committee 223, Farmington Hills, MI, 73(6), 1976, 319-339.
35. American Society of Testing Materials (ASTM) C125-06 Standard Terminology Relating to Concrete and Concrete Aggregates, Philadelphia, 2006.
36. American Society of Testing Materials (ASTM) C150-05 Standard Specification for Portland Cement, Philadelphia, 2005.
37. American Society of Testing Materials (ASTM) C260-01 Standard Specification for Air-Entraining Admixtures for Concrete, Philadelphia, 2001.
38. American Society of Testing Materials (ASTM) C330-05 Standard Specification for Lightweight Aggregates for Structural Concrete, Philadelphia, 2005.
39. American Society for Testing and Materials (ASTM) C 469-94, Test Method for Static Method of Elasticity and Poisson's Ratio of Concrete in Compression, Philadelphia, 1994.
40. American Society of Testing Materials (ASTM) C494/C494M-05a Standard Specification for Chemical Admixtures for Concrete, Philadelphia, 2005.
41. American Society of Testing Materials (ASTM) C567-05 Standard Test Method for Determining Density of Structural Lightweight Concrete, Philadelphia, 2005.
42. American Society of Testing Materials (ASTM) C595-05 Standard Specification for Blended Hydraulic Cements, Philadelphia, 2005.
43. Aziz, M.A., Paramsivam, P., and Lee, S.L., Concrete reinforced with natural fibers, in New Reinforced Concretes, R.N. Swamy (Ed.), Glasgow: Surrey University Press, 1984.
44. Balguru, P.N., and Shah, S.P. Alternative reinforcing materials for developing technology, Intl. J. Dev. Tech., 2, 1985, 87-105.
45. Balguru, P.N., Shah, S.P., Fiber-Reinforced Cement Composites, New York: McGraw-Hill, 1992.
46. Beck, D.L., Hiltz A.A., and Knox, J.R., Experimental data of specific volume vs. temperature to determine Tg of polypropylene, Soc. Plast. Eng. Trans., March, 1963, 279.
47. Berglund, L.A., Thermoplastic resins, in Handbook of Composites, S.T. Peters (Ed.), New York: Chapman & Hall, 1998.
48. Brunauer, S., Copeland, L.E., The chemistry of concrete, Scientific American, April 1964.
49. Bunsell, A.R., Fibre Reinforcements for Composite Materials, Amsterdam: Elsevier Science Publishers, 1988.
50. Canadian Society for Civil Engineers (CSCE), Advanced Composite Materials with Application to Bridges, Montreal, 1992.
51. Composites Institute of the Society of the Plastics Industry (CISPI), Introduction to Composites, Washington, DC, 1992.
52. Concrete Reinforcing Steel Institute (CRSI), Manual of Standard Practice, Chicago, 1994.
53. Cornish, E.H., Materials and the Designer, New York: Cambridge University Press, 1987.
54. Cossis, F.A., Talbot, R.C., Polyester and vinyl ester resins, in Handbook of Composites, S.T. Peters (Ed.), New York: Chapman & Hall, 1998.
55. Davis, H.E., Troxell, G.E., and Wiskosil, C.T., The Testing and Inspection of Engineering Materials, New York: McGraw-Hill, 1964.
56. Dewprashad, B., and Eisenbraun, E.J. Fundamentals of epoxy formulation, J. Chem. Educ., 71, 4, April, 1994, 290-294.
57. Donnet, J.B., Bansal, R.C., Carbon Fibers, New York: Marcel Dekker, 1984.
58. Ege, S., Organic Chemistry, 2nd ed., Lexington, MA: D.C. Heath & Co., 1989.
59. Gerig, J.T., Introductory Organic Chemistry, New York: Academic Press, 1974.
60. Gibson, R.F., Principles of Composite Material Mechanics, New York: McGraw-Hill, 1994.
61. Griffith, A.A., The phenomenon of rupture and flow in solids, Phil. Trans. Royal Soc., 221A, 1920, 163-198.
62. Gupta, R.K., Polymer and Composite Rheology, 2nd ed., New York: Marcel Dekker, 2000.
63. Gustafsson, C.G., Initiation of growth of fatigue damage in graphite/epoxy and graphite/PEEK laminates, Ph.D. dissertation, Royal Institute of Technology, Stockholm, 1988.
64. Hassoun, M.N., Design of Reinforced Concrete Structures, Boston: PWS Engineering, 1997.
65. International Conference of Building Officials (ICBO), Uniform Building Code-1997, Volume 2, Whittier, CA: 1997.
66. Jones, R.M., Mechanics of Composite Materials, New York: Hemisphere Publishing, 1975.
67. Kajorncheappunngam, S., The effect of environmental aging on durability of glass/epoxy composite, Dissertation submitted to the College of Engineering and Mineral Resources, EVU, 1999.
68. Kosmatka, S.H., Panarese, W.C., Design and Control of Concrete Mixtures, 13th ed, Chicago: Portland Cement Association, 1992.
69. Lubin, G. (Ed.). Handbook of Composites, New York: Van Nostrand Reinhold Co., 1982.
70. MacGregor, J.G., Reinforced Concrete: Mechanics and Materials, Upper Saddle River, NJ:Prentice Hall, 1997.
71. Mallick, P.K., Fiber Reinforced Composite Materials: Manufacturing and Design, New York:Marcel Dekker, 1993.
72. McConnel, V.P., Bridge column retrofit, High-Performance Composites, September/October, 1993, 62-64.
73. McConnel, V.P., Infrastructure update, High-Performance Composites, May/June, 1995, 21-25.
74. Mehta, P.K., Concrete: Structure, Properties, and Materials, Upper Saddle River, NJ: Prentice-Hall, 1986.
75. Mirza, S.A., Hatzinkolas, M., and MacGregor, J.G., Statistical description of strength of concrete, Proc. ASCE J. Struct. Div., 105, ST6, June, 1979.
76. Modern Plastics Encyclopedia, New York: McGraw-Hill, 1975.
77. Monte, Handbook of Fillers and Reinforcements, 1978.
78. Morgan, R.J., Allred, R.E., Aramid Fiber Reinforcements, Reference Book for Composites Technology, Vol. 1, Lee, S.M., ed., Lancaster, PA: Technomic Pub. Co., 1989.
79. Munley, E., FHWA structures research program: fiber reinforced polymer (FRP) composite materials, Summary of Remarks for 10th ASM/ESD Advanced Composite Conference and Exposition, Dearborn, MI, November 8, 1994.
80. Nielsen, E.L., Landel, R.F., Mechanical Properties of Polymers and Composites, 2nd ed., New York: Marcel Dekker, 1994.
81. Pauw, A., Static modulus of elasticity of concrete as affected by density, Proc. ACI Journal, 57, 6, December, 1960, 679-687.
82. Penn, L.S., Wang, H., Epoxy resins, in Handbook of Composites, S.T. Peters (Ed.), New York: Chapman & Hall, 1998.
83. Schwartz, M., Composites Materials Handbook, 2nd ed., New York: McGraw-Hill Co., 1992.
84. Shimp, D.A., Specialty matrix resins, in Handbook of Composites, S.T. Peters (Ed.), New York: Chapman & Hall, 1998.
85. Smith, W.F., Principles of Material Science and Engineering, 2nd ed., New York: McGraw-Hill, 1990.
86. Structural Plastics Design Manual, ASCE Manuals and Reports on Engineering Practice, No.63, American Society of Civil Engineers, pp. 66, 1984.
87. Tullo, A.H., Plastics additives' steady evolution, C & EN, December 2000, 21-31.
88. Vijay, P.V., GangaRao, H.V.S., and Bargo, J.M., Mechanical Characterization of Recycled Thermoplastic Polymers for Infrastructure Applications, ACMBS-3, Ottawa, Canada, pp. 55-60, Aug., 2000.
89. Anderson, F.R., Reichhold, A.S., and Norway, Open molding: hand lay-up and spray-up, ASM Handbook Composites, 21, 2000, 450-456.
90. Ankermo, M., Angstrom, B.T., Modeling component cost in compression molding of thermoplastic composite and sandwich components, Composites: Part A, 31, 2000, 319-333.
91. ASM International, ASM Handbook, Vol. 21, Cleveland, Ohio: ASM International Publications, 2001.
92. ASM International, Engineering Materials Handbook-Composites, Vol. 1, Boca Raton, FL:CRC Press, 1989.
93. Bickerton, S., Abdullah, M.Z., Modeling and evaluation of the filling stage of injection/compression moulding, Composites Sci. Tech., 63, 2003, 1359-1375.
94. Boh, J.W., Louca, L.A., Choo, Y.S., and Mouring, S.E., Damage modeling of SCRIMP woven roving laminated beams subjected to transverse shear, Composites Part B: Eng., 36, 2005, 427-438.
95. Branco, C.M., Ferreira, J.M., Faelt, P., and Richardson, M.O.W., A comparative study of the fatigue behaviour of GRP hand lay-up and pultruded phenolic composites, Int. J.Fatigue, 18, 4, 1995, 255-263.
96. Canadian Society for Civil Engineers (CSCE), Advanced Composite Materials with Application to Bridges, Montreal, 1992.
97. Caulk, D.A., General results on the flow of chopped fiber compounds in compression molding, J. Non-Newt. Fluid Mech., 28, 1998, 333-347.
98. Chen, H.C., Chiao, S.M., Fiber consolidation in the filament winding process: modeling with undulating channels, Composites Sci. Tech., 56, 1996, 1161-1169.
99. Composites Institute of the Society of the Plastics Industry (CISPI), Introduction to Composites, Washington, DC, 1992.
100. Davima, J.P., Reis, P., and António, C.C., Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up, Composites Sci. Tech., 64, 2004, 289-297.
101. Dumont, P., Orgea, L., Le Corre, S., and Favier, D., Anisotropic viscous behavior of sheet molding compounds (SMC) during compression molding, Intl. J. Plasticity, 19, 2003, 625-646.
102. Ferret, B., Anduze, M., and Nardari, C., Metal inserts in structural composite materials manufactured by RTM, Composites Part A: Appl. Sci. Manuf., 29, 1998, 693-700.
103. Gutowski, T.G. (Ed.), Advanced Composites Manufacturing, New York: John Wiley & Sons, 1997.
104. Han, K., Jiang, S., Zhang, C., and Wang, B., Flow modeling and simulation of SCRIMP for composites manufacturing, Composites Part A: Appl. Sci. Manuf., 31, 2000, 79-86.
105. Henninger, F., Friedrich, K., Thermoplastic filament winding with online-impregnation.Part A: process technology and operating efficiency, Composites: Part A, 33, 2002, 1479-1486.
106. Holloway, L. (Ed.), Polymers and Polymer Composites in Construction, London: Thomas Telford, 1990
107. Holmberg, J.A., Berglund, L.A., Manufacturing and performance of RTM U-beams, Composites Part A: Appl. Sci. Manuf., 28, 1997, 513-521.
108. Hulme, A.J., Goodhead, T.C., Cost effective reprocessing of polyurethane by hot compression moulding, J. Mat. Proc. Tech., 139, 2003, 322-326.
109. Kim, P.J., Lee, D.G., Surface quality and shrinkage of the composite bus housing panel manufactured by RTM, Composite Struct., 57, 2002, 211-220.
110. Kopf, S., SCRIMP Systems, New Castle, DE: Hardcore DuPont, 1995.
111. Korotkov, V.N., Chekanov, Y.A., and Rozenberg, B.A., The simultaneous process of filament winding and curing for polymer composites, Composites Sci. Tech., 47, 1993, 383-388.
112. Koussios, S., Bergsma, O. K., and Beukers, A., Filament winding. Part 1: Determination of the wound body related parameters, Composites: Part A, 35, 2004, 181-195.
113. Lawrence, J.M., Fried, P., and Advani, S.G., Automated manufacturing environment to address bulk permeability variations and race tracking in resin transfer molding by redirectingflow with auxiliary gates, Composites Part A: Appl. Sci. Manuf., 36, 2005, 1128-1141.
114. Le Riche, R., Saouab, A., and Bréard, J., Coupled compression RTM and composite layup optimization, Composites Sci. Tech., 63, 2003, 2277-2287.
115. Lee, C.C., and Tucker, C.L. III, Flow and heat transfer in compression mold filling, J. Non-Newt. Fluid Mech., 24, 1987, 245-264.
116. Mallick, P.K. (Ed.), Composites Engineering Handbook, New York: Dekker Publishing, 1997.
117. Mantell, S.C., Springer, G.S., Filament winding process models, Composite Struct., 27, 1994, 141-147.
118. Miller, H., Dodds, N., Hale, J.M., and Gibson, A.G., High speed pultrusion of thermoplastic matrix composites, Composites Part A: Appl. Sci. Manuf., 29, 1998, 773-782.
119. Odenberger, P.T., Andersson, H.M., and Lundström, T.S., Experimental flow-front visualization in compression molding of SMC, Composites: Part A, 35, 2004, 1125-1134.
120. Paciornik, S., Martinho, F.M., de Mauricio, M.H.P., and d'Almeida, J.R.M., Analysis of the mechanical behavior and characterization of pultruded glass fiber-resin matrix composites, Composites Sci. Tech., 63, 2003, 295-304.
121. Peters, S.T. (Ed.), Handbook of Composites, 2nd ed., New York: Chapman & Hall, 1998.
122. Suh, J.D., Lee, D.G., Manufacture of composite screw rotors for air compressors by RTM process, J. Mat. Proc. Tech., 113, 2001, 196-201.
123. Suratno, B.R., Ye, L., and Mai, Y.M., Simulation of temperature and curing profiles in pultruded composite rods, Composites Sci. Tech., 58, 1998, 191-197.
124. Wakeman, M.D., Rudd, C.D., Cain, T.A., Brooks, R., and Long, A.C., Compression moulding of glass and polypropylene composites for optimized macro- and micro-mechanical properties. 4: Technology demonstrator - a door cassette structure, Composites Sci.Tech., 60, 2000, 1901-1918.
125. Ajjarapu, S., Faza, S., and GangaRao, H.V.S., Strength and Stiffness Degradation of Glass Reinforced Polyester and Vinyl Ester Structural Plates, Morgantown, WV: Constructed Facilities Center, West Virginia University, 1994.
126. Al Cheikh, A., Murat, M., Kinetics of non-congruent dissolution of E-glass fiber in saturated calcium hydroxide solution, Cement Concrete Res., 18, 943-950, 1988.
127. Allred, R.E., The effects of temperature and moisture content on the flexural response of Kevlar/epoxy laminates: Part II [45/0/90] Filament orientation, Environmental Effects on Composites Materials, v. 2, Springer, G. (Ed.), Lancaster, PA: Technomic Publishing Company, 1984.
128. American Concrete Institute (ACI), ACI 440.1R-03: Guide for the design and construction of concrete reinforced with FRP bars, Detroit, Michigan.
129. American Concrete Institute (ACI), ACI 440.2R-02: Design and construction of externally bonded FRP systems for strengthening concrete structures, Detroit, Michigan.
130. Arockiasamy, M., Amer, A., Shahawy, M., and Chidambaram, S., Long-term behaviour of concrete beams reinforced with CFRP bars under sustained loads, ACMBS-II, El-Badry, M. (Ed.), Montreal, August 1996.
131. Arockiasamy, M., GangaRao, H.V.S., Vijay, P.V., Benmokrane, B., and Shahawy M., Fiber reinforced polymer composites for concrete bridge reinforcement, Final Report, Project 10-55, FY'99, Submitted to National Cooperative Research Highway Program (NCHRP), Transportation Research Board, National Research Council, May 2003.
132. Bakht, G.A., Banthia, N., Cheung, M., Erki, M., Faoro, M., Machida, A., Mufti, A., Neale, K.W., and Tadros, G., Canadian bridge design code provisions for fiber-reinforcedstructures, J. Composites Construction, ASCE, 4(1), 3-15, 2000.
133. Benmokrane, B., Rahman, H. (Eds.), Durability of fiber-reinforced polymer (FRP) composites for constructions, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
134. Benmokrane, B., Rahman, H., Ton-That, T.M., and Robert, J.F., Improvement of the durability of FRP rebars for concrete structures, CDCC '98, Benmokrane, B., Rahman, H.(Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
135. Brown, V.L., Bartholomew, C.V., Long-term deflections of GFRP-reinforced concrete beams, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, January 1996.
136. BS 4994:1987, Specification for Design and Construction of Vessels and Tanks in Reinforced Plastics, 1987, U.K.
137. Chateauminois, A., Chabert, B., Soulier, J.P., and Vincent, L., Effects of hygrothermal aging on the durability of glass/epoxy composites. Physico-chemical analysis and damage mapping in static fatigue, Proc. ICCM '93, 1993.
138. Civil Engineering Research Foundation (CERF), Gap analysis for durability of fiber reinforced polymer composites in civil infrastructure, CERF-01, Research Affiliate of American Society of Civil Engineers, 2001.
139. Clarke, J.L., Sheard, P., Designing durable FRP reinforced concrete structures, durability of fibre reinforced polymer (FRP) composites for construction, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
140. Coomarasamy, A., Ipe, A.K.C, Evaluation of fiber reinforced plastic (FRP) materials for long term durability in concrete structures, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
141. Demers, M., Popovic, A., Neale, K., Rizkalla, S., and Tadros, G., FRP retrofit of the ringbeam of a nuclear reactor containment structure, ACI Spec. Publ., SP-215, November 2003.
142. Kajorncheappunngam, S., Gupta, R.K., and GangaRao, H.V.S., Effect of aging environment on degradation of glass reinforced epoxy, J. Composites Construction, ASCE, Vol. 6, No. 1, Feb. 2002.
143. Karbhari, V.M., Chin, J.W., Hunston, D., Benmokrane, B., Juska, T., Morgan, R., Lesko, J.J., Sorathia, U., and Reynaud, D., Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure, J. Composites Construction, 73, 238-247, August 2003.
144. Kato, Y., Nishimura, T., Uomoto, T., and Yamaguchi, T., The effect of ultraviolet rays to FRP rods, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
145. Katsuki, F., Uomoto, T., Prediction of deterioration of FRP rods due to alkali attack. Nonmetallic (FRP) reinforcement for concrete structures, FRPCS-2, Gent, Belgium, 1995.
146. Katz, A., Berman, N., and Bank, L.C., Effect of cyclic loading and elevated temperature on the bond properties of FRP rebars, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
147. Kelen, T., Polymer Degradation, New York: Van Nostrand Reinhold Co., 1983.
148. Kumar, V.S., GangaRao, H.V.S., Fatigue response of concrete decks reinforced with FRP rebars, J. Struct. Eng., 124, 1, 11-16, January 1998.
149. Lagrange, A., Melennec, C., and Jacquemet, R., Influence of various stress conditions of the moisture diffusion of composite in distilled water and in natural sea-water, Durability of Polymer Based Composite Systems for Structural Applications, St. Louis, MO: Elsevier Applied Science, 1991.
150. Lampo, R.G., Hoy D.E., and Odello, R.J., Field performance of FRP composite prestressing cables, Materials for the New Millennium, Proc. 4th Matls. Eng. Conf., ASCE, November 1996.
151. Litherland, K.L., Oakley, D.R., and Proctor, B.A., The use of accelerated aging procedures to predict the long term strength of GRC composites, Cement Concrete Res., 11, 455-466, 1981.
152. Lopez-Anido, R., Howdyshell, P., and Stephenson, L.D., Durability of modular FRP composite bridge decks under cyclic loading, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
153. Machida, A. (Ed), State-of-the-art report on continuous fiber reinforcing materials, Concrete Engineering Series 3, Research Committee on Continuous Fiber Reinforcing Materials, Tokyo: Japan Society of Civil Engineering, 1993.
154. Malvar, L.J., Durability of composites in reinforced concrete, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
155. Mandell, J.F., Meier, U., Effects of stress ratio, frequency and loading time on the tensile fatigue of glass reinforced epoxy. Long-term behaviour of composites, ASTM STP 813, O'Brien, T. K. (Ed.), Philadelphia, PA: American Society for Testing and Materials, 1983.
156. Marshall, O.S. Jr., Busel, J.P., Composite repair/upgrade of concrete structures, Materials for the New Millenium, Chong, K.P. (Ed.), Proc. 4th Matls. Eng. Conf., Washington, DC, November 1996.
157. NACE, CCT, and FHWA, Cost of Corrosion Study (CCS), July 2002, http://nace.org/nace/ content/nacenews/news_win/html/costcorr.htm.
158. Nanni, A., Bakis, C.E., and Mathew, J.A., Acceleration of FRP bond degradation, Durability of Fiber Reinforced Polymer Composites for Construction (FRP), Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
159. Natarajan, V., GangaRao, H.V.S., and Shekar, V., Fatigue response of fabric reinforced polymeric composites, J. Composite Materials, 39, 17, 1541-1559, 2005.
160. Odagiri, T., Matsumoto, K., and Nakai, H., Fatigue and relaxation characteristics of continuous aramid fiber reinforced plastic rods, Proc. 3rd Intl. Symp. Non-Metallic (FRP) Reinforcement for Concrete Struct., v.2, Japan Concrete Institute, 1997.
161. Parkyn, B., Glass reinforced plastics, In: Encyclopedia of Polymer Science and Engineering, 2nd Ed., London: CRC Press, 1970; New York: John Wiley & Sons, 1985.
162. Porter, M.L., Barnes, B.A., Accelerated durability of FRP reinforcement for concrete structures, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
163. Priestley, M.J.N., Seible, F., and Fyfe, E., Column seismic retrofit using fiberglass/epoxy jacket, advanced composite materials in bridges and structures, Neale, K.W., Labossiere, P. (Eds.), Canadian Society for Civil Engineers, Canada, 1992.
164. Pritchard, G., French, M.A., The fracture surface of hybrid fiber composites, Composite Sci. Tech., 47, 217-223, 1993.
165. Pritchard, G., Speake, S.D., Effects of temperature on stress-rapture times in glass/poly- ester laminates, Composites, 19, 1, 29-35, 1988.
166. Proctor, B.A., Oakley, D.R., and Litherland, K.L., Development in the assessment and performance of GRC over 10 years, Composites, 173-179, April 1982.
167. Rao, R.M.G.K., Balasubramanian, N., and Chanda, M., Factors affecting moisture absorption in polymer composites, Part-II, Influence of External Factors, Environment Effects on Composite Materials, v. III, Springer, G. (Ed.), Lancaster, PA: Technomic Publishing Company, 1981.
168. Roll, R.D., Use of GFRP rebar in concrete structures, Advanced Composite Materials in Civil Engineering Structures, Iyer, S.L. (Ed.), Proc. Soc. Specialty Conf., New York: ASCE, January 1991.
169. Rostasy, F.S., Frp: The European Perspective, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, January 1996.
170. Schutte, C.L., Environmental durability of glass fibre composites, Matl. Sci. Eng., 13. 7, 265-323, November 1994.
171. Seible, F., Karbhari, V., Advanced composites for civil engineering applications in the U.S, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, January 1996.
172. Sen, R., Shahawy, M., Rosas, J., and Sukumar, S., Durability of AFRP pretensioned elements in a marine environment, ACI Struct. J., 95, 5, 578-587, 1998.
173. Sheard, P.A., Clarke, J.L., Dill, M.J., Hammersley, G.P., and Richardson, D.M., Eurocrete - Taking account of durability for design of FRP reinforced concrete structures, Proc. 3rd Intl. Symp. Non-Metallic (FRP) Reinforcement for Concrete Struct., v.2, Japan Concrete Institute, October 1997.
174. Sonobe, Y., Fukuyama, H., Okamoto, T., Kani, N., Kimura, K., Kobayashi, K., Masuda, Y., Matsuzaki, Y., Nochizuki, S., Nagasaka, T., Shimizu, A., Tanano, H., Tanigaki, M., and Teshigawara, M., Design guidelines of FRP reinforced concrete building structures, J. Composites Construction, 90-115, August 1997.
175. Springer, G.S. (Ed.), Environmental Effects on Composite Materials, v.I-III, Lancaster, PA: Technomic Publishing Company, 1981.
176. Taerwe, L., FRP developments and applications in Europe, Fiber-Reinforced-Plastic (FRP) Reinforcement for Concrete Structures: Properties and Applications, New York: Elsevier Science Publishers, 1993.
177. Talreja, R., Fatigue of Composite Materials, Lancaster, PA: Technomic Publishing Company, 1987.
178. Uomoto, T., Durability considerations for FRP reinforcements, Proc. FRPRCS-5, Burgoyne, C.J. (Ed.), Cambridge, 2001.
179. Vijay, P.V., Aging Behavior of Concrete Beams Reinforced with GFRP Bars, Ph.D. dissertation, Department of Civil and Environmental Engineering, West Virginia University, Morgantown, May 1999.
180. Vijay, P.V., GangaRao, H.V.S., Creep behavior of concrete beams reinforced with GFRP bars, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
181. Vijay, P.V., GangaRao, H.V.S., Development of fiber reinforced plastics for highway application: aging behavior of concrete beams reinforced with GFRP bars, CFC-WVU Report No. 99-265 (WVDOH RP #T-699-FRP1), 1999a.
182. Vijay, P.V., GangaRao, H.V.S., Accelerated and natural weathering of glass fiber reinforced plastic bars, 4th Intl. Symp., Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI Fall Conference, SP-188, October-November 1999b.
183. Vijay, P.V., GangaRao, H.V.S., Bending behavior and deformability of glass fiber-reinforced polymer reinforced concrete members, ACI Struct. J., 98(6), 834-842, Novem- ber-December 2001.
184. Vijay, P.V., GangaRao, H.V.S., and Kalluri, R., Hygrothermal response of GFRP bars under different conditioning schemes, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Québec, Canada, August 5-7, 1998.
185. Zheng, Q., Morgan, R.J., Synergistic thermal-moisture damage mechanisms of epoxies and their carbon fiber composites, J. Composite Matls., 27, 15, 1465-1478, 1993.
186. ACI SP-138, Shear Capacity of RC and PC Beams Using FRP Reinforcement, Detroit, MI: American Concrete Institute, 1993.
187. ACI 224.1R Causes, Evaluation, and Repair of Cracks in Concrete Structures, Detroit, MI: American Concrete Institute.
188. ACI 224R Control of Cracking in Concrete Structures, Detroit, MI: American Concrete Institute.
189. ACI 318 Building Code Requirements for Reinforced Concrete and Commentary, Detroit, MI: American Concrete Institute, 2002.
190. ACI 318-99, American Concrete Institute Building Code Requirements for Reinforced Concrete, Detroit, MI: American Concrete Institute, 1999.
191. ACI 364.1R Guide for Evaluation of Concrete Structures Prior to Rehabilitation, Detroit, MI: American Concrete Institute.
192. ACI 437R Strength Evaluation of Existing Concrete Buildings, Detroit, MI: American Concrete Institute.
193. ACI 440.1R-03: Guide for the Design and Construction of Concrete Reinforced with FRP Bars, Detroit, MI: American Concrete Institute, 2003.
194. ACI 440.2R-02: Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, Detroit, MI: American Concrete Institute, 2002.
195. ACI 503.1-92-503.4-92: Use of Epoxy Specifications (4 volumes), Detroit, MI: American Concrete Institute.
196. ACI 546R Concrete Repair Guide, Detroit, MI: American Concrete Institute.
197. ACMBS-III, Advanced Composite Materials for Bridges and Structures, Ottawa, Ontario, Canada, 2000.
198. Ahmad, S.H., Shah, S.P., Stress-strain curves of concrete confined by spiral reinforcement, ACI Journal, 79(6): 484-490, 1982.
199. Alkhrdaji T., Thomas J., Upgrading Parking Structures: Techniques and Design Considerations, Bulletin-The Construction Specifier, Structural Group Preservation Systems, Hanover, MD, 2005.
200. Arduini, M., Nanni, A., Behavior of pre-cracked RC beams strengthened with carbon FRP sheets, Journal of Composites in Construction, 1(2): 63-70, 1997.
201. Arockiasamy, M., Zhuang, M., Durability of Concrete Beams Pretensioned with CFRP Tendons, Proceedings of the International Conference on Fiber Reinforced Structural Plastics in Civil Engineering at Indian Institute of Technology, Madras, December, pp.18-20, 1995.
202. Baaza, I.M., Missihoun, M., and Labossiere, P., Strengthening of reinforced concrete beams with CFRP sheets, First International Conference on Composites in Infrastructures ICCI 96, Tucson, pp. 746-759, January 1996.
203. Barger, J.D., Effect of Aging on the Bond between FRP and Concrete, M.S. thesis, West Virginia University, Morgantown, 2000.
204. Benmokrane, B.and Rahman, H. (Eds.), CDCC-1998, Proceedings of 1st International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction (CDCC 98), Canada, August 1998.
205. CFR-49: Code of Federal Regulations: Chapter C Transportation.
206. Chajes, M.J., Januzska, T.F., Mertz, D.R., Thomson, T.A. Jr., and Flench, W.W. Jr., Shear strengthening of reinforced concrete beams using externally applied composite fabrics, ACI Structural Journal, 92(3): 295-303, 1995.
207. Crasto, A.S., Kim, R.Y., Fowler, C., and Mistretta, J.P., Rehabilitation of concrete bridge beams with externally-bonded composite plates. Part I, First International Conference on Composites in Infrastructures ICCI 96, Tucson, pp. 857-869, January 1996.
208. Dolan, C., FRP development in the United States, fiber-reinforced-plastic reinforcement for concrete structures: properties and applications, Developments in Civil Engineering, 42, 129-163, 1993.
209. Fyfe, E.R., Gee, D.J., and Milligan, P.B., Composite systems for seismic applications, Concrete International, 20(6): 31-33, 1998.
210. GangaRao, H.V.S., Thippeswamy, H.K., A Conference on Polymer Composites - Infrastructural Renewal and Economic Development, April 19-21, Parkersburg, West Virginia, in Advanced Polymer Composites for Transportation Infrastructure, Creese, R.C., H. GangaRao, H.V.S. (Eds.), Lancaster, PA: Technomic Publishing Company, pp. 3-20, 1999.
211. GangaRao, H.V.S., Vijay, P.V., Bending behavior of concrete beams wrapped with carbon fabric, Journal of Structural Engineering, 124(1): 3-10, 1998.
212. GangaRao, H.V.S., Vijay, P.V., Draft design guidelines for concrete beams externally strengthened with FRP, NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures, 1998, Tucson, Duthinh, D. (Ed.), NISTIR 6288, pp. 3/113-120, January 1999.
213. GangaRao, H.V.S., Vijay, P.V., and Barger, J.D., Durability of Reinforced Concrete Members Wrapped with FRP Fabrics (Phase III) - Effects of Aging on Bond between FRP and Concrete, CFC Report #00-280, West Virginia Department of Transportation (WVDOH) Report, RP #T-699-CIDDMOC, Charleston, WV, May 2000.
214. Grace, N.F., Ragheb, W.F., and Sayed, G.A., Ductile FRP strengthening systems, Concrete International, January, pp. 31-36, 2005.
215. Green, M., Bisby, L.A., Effects of freeze-thaw action on the bond of FRP sheets to concrete, Proceedings of the International Conference on Durability of Fiber Reinforced Polymer (FRP) Composite for Construction, Montreal, Quebec, Canada, pp.179-190, May 1998.
216. Hollaway L., Adhesive and bolted joints, in Polymers and Polymer Composites in Construction, London: Thomas Telford Ltd., 1990.
217. Homam, S.M., Sheikh, S.A., Durability of fibre reinforced polymers used in concrete structures, Proceedings of the Third International Conference on Advanced Composite Materials in Bridges and Structures, Ottawa, Ontario, Canada, pp.751-758, August 2000.
218. Hota, V.S., GangaRao, Faza, S.S., and Vijay, P.V., Behavior of Concrete Beams Wrapped with Carbon Tow Sheet, CFC report No.95-196, April, submitted to Tonen Corporation, Tokyo, 1995.
219. ICCI-1998, Fiber composites in infrastructure, Proceedings of the Second International Conference on Composites in Infrastructure, ICCI'98, Tucson, AZ.
220. ICRI 03730, Guide for Surface Preparation for the Repair of Deteriorated Concrete Resulting from Reinforcing Steel Corrosion.
221. ICRI 03733, Guide for Selecting and Specifying Materials for Repairs of Concrete Surfaces.
222. Ichimasu, H., Maruyama, M., Watanabe, H., and Hirose, T., RC slabs strengthened by bonded carbon FRP plates, Part-1 Laboratory Study and Part-2 Applications, Fiber Reinforced-Plastic Reinforcement for Concrete Structures, International Symposium, A. Nanni and C.W. Dolan, Eds., ACI SP-138, pp. 933-970, 1993.
223. Iyer S.L., Kortikere A., and Khubchnadani A., Concrete and Sand Confined with Composite Tubes, Materials for the New Millennium, Proceedings of the Fourth Materials Engineering Conference, Washington, D.C., November 10-14, Chong K.P. (Ed.), ASCE, pp. 1308-1319, 1996.
224. Javed, S., Accelerated Aging in Concrete Beams Externally Bonded with Carbon Fiber Tow sheet, CFC report No.96-239, West Virginia University, Morgantown, 1996.
225. JSCE, Application of Continuous Fiber Reinforcing Materials to Concrete Structures, JSCE Subcommittee on Continuous Fiber Reinforcing Materials, Concrete Library International of JSCE, No. 19, Tokyo, 1992
226. Karbhari, V. M., Seible, F., Design Considerations for the Use of Fiber Reinforced Polymeric Composites in the Rehabilitation of Concrete Structures, NIST Workshop on Standards Development for the Use of Fiber Reinforced Polymers for the Rehabilitation of Concrete and Masonry Structures. Proceedings January 7-8, 1998, Tucson, AZ, D. Duthinh (Ed.), NISTIR 6288, pp. 3/59-72, 1999.
227. Khalifa, A., Gold, W., Nanni, A., and Abel-Aziz, M., Contribution of externally bonded FRP to the shear capacity of RC flexural members, Journal of Composites in Construction, 2(4): 195-203, 1998.
228. Kshirsagar, S., Lopez, A. R., and Gupta, R. K., Durability of Fiber Reinforced, Composite Wrapping for the Rehabilitation of Concrete Piers, Proceedings of CDCC 98, Montreal, pp. 117-128, 1998.
229. Lee, Y.J., Boothby, T.E., Nanni, A., and Bakis, C.E., Tension Stiffening Model for FRP Sheets Bonded to Reinforced Concrete, Proceedings, ICCI98, Tucson, AZ, January 5-7, 1998.
230. MacGregor, G. J., Reinforced Concrete Mechanics and Design, Upper Saddle River, NJ: Prentice Hall, 1998.
231. Machida, A., (Ed.), State-of-the-art report on continuous fiber reinforcing materials, Concrete Engineering Series 3, Research Committee on Continuous Fiber Reinforcing Materials, Japan Society of Civil Engineering, Tokyo, 164 pp.
232. Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y., A study on bond mechanisms of carbon fiber sheets, in Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Third Symposium, Vol. 1, pp. 279-286, 1997.
233. Mallick, P. K., Fiber Reinforced Composite Materials, Manufacturing and Design, New York: Marcel Dekker, 1993.
234. Malvar, L., Warren, G., and Inaba, C., Rehabilitation of Navy Pier Beams With Composite Sheets, Second FRP International Symposium, Non-Metallic (FRP) Reinforcements for Concrete Structures, Gent, Belgium, pp. 533-540, 1995.
235. Mander, J. B., Priestly, M. J. N., and Park, R., Observed stress-strain behavior of confined concrete, Journal of Structural Engineering, 114 (8): 1827-1849, 1988.
236. Marshall, O. S., Sweeney, S. C., and Trovillion, J. C., Seismic Rehabilitation of Unreinforced Masonry Walls, Fourth International Symposium Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI SP-188, pp. 287-295, 1999.
237. Master Builders-Design Guidelines, Design Manual, Master Builders, Cleveland, Ohio, 2005.
238. McConnel, V. P., Infrastructure update, High Performance Composites, pp. 21-25, 1995.
239. Meier, U., Carbon fiber-reinforced polymers: modern materials in bridge engineering, Reprint from Structural Engineering International, International Association for Bridge and Structural Engineering, CH-8093, Zurich, pp. 7-12, 1992.
240. Meier, U., Deuring, M., Meier, H., and Schwegler, G., Strengthening of structures with advanced composites, in Alternative Materials for the Reinforcement and Prestressing of Concrete, J. L. Clarke (Ed.), Blackie Academic and Professional, 1993.
241. Mufti, A., Erki, M. A., and Jaeger, L. (Eds.), Advanced Composite Materials with Application to Bridges, Canadian Society of Civil Engineers, Montreal, 1991.
242. Nawy, E.G., Reinforced Concrete: Fundamental Approach, Upper Saddle River, NJ: Prentice Hall, 2002.
243. NCHRP Report 514, Bonded Repair and Retrofit of Concrete Structures Using FRP Composites: Recommended Construction Specifications and Process Control Manual, Transportation Research Board, 2004.
244. Neale, K. W., Labossiere, P., State-of-the-art report on retrofitting and strengthening by continuous fibre in Canada, Non-Metallic (FRP) Reinforcement for Concrete Structures, Japan Concrete Institute, Tokyo, Vol. 1, pp. 25-39, 1997.
245. Nikolaos, P., Triantafillou, T. C., and Veneziano, D., Reliability of RC members strengthened with CFRP laminates, Journal of Structural Engineering, 121(7): 1037-1044, 1995.
246. Oehlers, D. J., Reinforced concrete beams with plates glued to their soffits, Journal of Structural Engineering, 118(8): 2023-2038, 1992.
247. Pantelides, C. P., Gergely, J., Reaveley, L. D., and Volnyy, V. A., Retrofit of RC bridge pier with CFRP advanced composites, Journal of Structural Engineering, 125(10): 1094-1099, 1999.
248. Park, R., Paulay, T., Reinforced Concrete Structure, New York: John Wiley & Sons, 1975.
249. Priestly, M. J. N., Seible, F., and Fyfe, E., Column seismic retrofit using fiberglass/epoxy jackets, in Advanced Composite Materials in Bridges and Structures, K. W. Neale and P. Labossiere (Eds.), Canadian Society for Civil Engineering, pp. 287-298, 1992.
250. Razaqpur G., Ali, A. M., A New Concept for Achieving Ductility in FRP-Reinforced Concrete, ICCI '96, Proceedings of First International Conference on Composites in Infrastructure, Tucson, AZ, pp. 401-413, 1996.
251. Rodriguez, M., Park, R., Seismic load tests on reinforced concrete columns strengthened by jacketing, ACI Structural Journal, 91(2): 150-159, 1994.
252. Saadatmanesh, H., Ehsani, M. R., RC beams strengthened with GFRP plates-I: experimental study, Journal of Structural Engineering, 117(11): 3417-3433, 1991.
253. Sen R., Mullins G., Winters D., Suh K., Underwater Repair of Corroded Piles, Structural Faults and Repair, 11th International Conference and Exhibits, Edinburgh, UK, June 2006.
254. Sharif, A., Al-Sulaimani, G.J., Basunbul, I.A., Baluch, M.H., and Ghaleb, B.N., Strengthening of initially loaded reinforced concrete beams using FRP plates, ACI Structural Journal, 2, 160-168, 1994.
255. Sheheta, E., Morohy, R., and Rizkalla, S., Use of FRP as shear reinforcement for concrete structures, in Proceedings of ICCI '98, M. R. Eshani and H. Saadatmanesh (Eds.), pp. 300-315, 1998.
256. Sika Design Manual, Engineering Guidelines for the Use of Sika Carbodur (CFRP) Laminates for Structural Strengthening of Concrete Structures, Sika Corporation, 1997.
257. Sonobe, Y., Fukuyama, H., Okamoto, T., Kani, N., Kimura, K., Kobayashi, K., Masuda, Y., Matsuzaki, Y., Nochizuki, S., Nagasaka, T., Shimizu, A., Tanano, H., Tanigaki, M., and Teshigawara, M., Design guidelines of FRP reinforced concrete building structures, Journal of Composites for Construction, 90-115, 1997.
258. Soudki, K. A., and Green, M. F., Freeze-thaw response of CFRP wrapped concrete, Concrete International, 19(8): 64-67, 1997.
259. Swamy, R.N., Jones, R., and Bloxham, J.W., Structural behavior of rReinforced concrete beams strengthened by epoxy-bonded steel plates, The Structural Engineer, 65A(2): 1987.
260. Tarricone P., Composite sketch, ASCE, 65(5): 52-55, May 1995.
261. Tavakkolizadeh M., Saadatmanesh H., Galavanic corrosion of carbon and steel in aggressive environments, Journal of Composites for Construction, ASCE, 5(3): 200-210, August 2001.
262. Teng J.G., Debonding Failures of RC Beams Flexurally Strengthended with Externally Bonded FRP Reinforcement, Structural Faults and Repair, 11th International Conference and Exhibits, Edinburgh, UK 13-15, June 2006.
263. Teng, J.G., Smith, S.T., Yao, J., and Chen, J.F., Intermediate crack induced debonding in RC beams and slabs, Construction and Building Materials, 17(6-7): 447-462, 2001.
264. Tonen-Design Guidelines, FORCA TOW SHEET Technical Manual, Tonen Corporation, Japan, 1996.
265. Vijay, P.V., Aging Behavior of Concrete Beams Reinforced with GFRP Bars, Ph.D. dissertation, West Virginia University, Morgantown, 1999.
266. Vijay, P.V., GangaRao, H.V.S., Development of Fiber Reinforced Plastics for Highway Application: Aging Behavior of Concrete Beams Reinforced with GFRP bars, CFC- WVU Report No. 99-265 (WVDOH RP #T-699-FRP1), 202 pp., 1999
267. Vijay, P.V., GangRao, H.V.S., Accelerated aging and durability of GFRP bars, Proceedings of the First International Conference on Durability of Fiber Reinforced Polymer (FRP) Composite for Construction, Montreal, Quebec, Canada, July, 1998.
268. Vijay, P.V. GangRao, H.V.S., Webster, K., and Prachasaree, W., Durability of concrete beams with fiber wraps, Proceedings of the Second International Conference on Durability of Fiber Reinforced Polymer (FRP) Composite for Construction, Montreal, Quebec, Canada, pp.51-62, May 2002.
269. Wan, B., Sutton, M., Petrou, M.F., Harries, K.A., and Li, N., Investigation of bond between FRP and concrete undergoing global mixed mode I/II loading, ASCE Journal of Engineering Mechanics, 130(12): 1467-1475, 2004.
270. Wang, C.K., Reinforced Concrete Design, 5d ed., New York: Harper Collins, 1992.
271. Wheat, H.G., Karpate H., Jirsa J.O., Fowler D.W., and Whitney D.P., Examination of FRP Wrapped Columns and Beams in a Corrosive Environment, Structural Faults and Repair, 11th International Conference and Exhibits, Edinburgh, UK, 13-15, June 2006.
272. Al-Salloum, Y.A., Sayed, S.H., and Almusallam, T.H. Some Design Considerations for Concrete Beams Reinforced with GFRP Bars, First International Conference on Composite Infrastructure, ICCI-96, 1996, pp. 318-331.
273. American Concrete Institute (ACI), American Concrete Institute Building Code Requirements for Reinforced Concrete, ACI 318-95, Farmington Hills, MI: American Concrete Institute, 1995.
274. American Concrete Institute (ACI), American Concrete Institute Building Code Requirements for Reinforced Concrete, ACI 318-99, Farmington Hills, MI: American Concrete Institute, 1999.
275. American Concrete Institute (ACI), American Concrete Institute Building Code Requirements for Reinforced Concrete, ACI 318-02, Farmington Hills, MI: American Concrete Institute, 2002.
276. American Concrete Institute (ACI), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI Committee 440, ACI 440.1R-01, Farmington Hills, MI: American Concrete Institute, 2001.
277. American Concrete Institute (ACI), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI Committee 440, ACI 440.1R-03, Farmington Hills, MI: American Concrete Institute, 2003.
278. Bakis, C.E., Nanni, A., and Terosky, J.A., Smart, pseudo-ductile reinforcing rods for concrete; manufacture and test, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ., January 15-17, 1996.
279. Belarbi, A., Chandrashekhara, K., and Warkins, S.E., Smart composite rebars with enhanced ductility, Proc. 11th Conf. Eng. Mech., Ft. Lauderdale, FL, May 19-22, 1996.
280. Benmokrane, B., Challal, O., and Masmoudi, R. Flexural response of concrete beams reinforced with GFRP bars, ACI Structural Journal, 93(1): 46-55, January-February 1996.
281. Brown, V., Sustained load deflections in GFRP-reinforced concrete beams, Proc. 3rd Intl. Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), Vol. 2, Japan Concrete Institute, Sapporo, Japan, 1997.
282. Brown, L.V., Bartholomew, C. FRP reinforcing bars in reinforced concrete members, ACI Materials Journal, 90(1): 34-39, January-February 1993.
283. Byars, E.F., Snyder, R.D. Engineering Mechanics of Deformable Bodies, New York: Intext Educational Publishers, 1975.
284. Canadian Standards Association (CSA), Fiber reinforced structures and commentary, Canadian Highway Bridge Design Code (CHBDC), draft Chapter 16, 1996 (final report completed in 1998).
285. Cozensa, E., Manfredi, G., and Realfonzo, R. Behavior and modeling of bond of FRP rebars to concrete, Journal of Composites for Construction, ASCE, 1(2): 40-51, 1997.
286. Dowden, D.M., Dolan, C.W., Comparison of experimental shear data with code predictions for FRP prestressed beams, Proc. 3rd Intl. Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), Vol. 2, Japan Concrete Institute, Sapporo, Japan, 1997.
287. Faza, S.S., GangaRao, H.V.S., Theoretical and experimental correlation of behavior of concrete beams reinforced with fiber reinforced plastic rebars, Fiber-Reinforced- Plastic Reinforcement for Concrete Structures, SP-138, Farmington Hills, MI: American Concrete Institute, 1993.
288. FRPRCS-IV, Proc. 4th Intl. Symp. Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI Sp-188, 1999.
289. GangaRao, H.V.S., Faza, S.S. Bending and Bond Behavior and Design of Concrete Beams Reinforced with Fiber Reinforced Plastic Rebars, Research Report CFC-92-142, Submitted to West Virginia Department of Highways, Charleston, WV, 1991.
290. GangaRao, H.V.S., Vijay, P.V, Kalluri, R., and Taly, N.B., Behavior of concrete T-beams reinforced with GFRP bars under bending, Proc. ACMBS-III, Ottawa, Canada, August 2000.
291. Harris, H.G., Somboonsong, F.K. Ko, and Huesgen, R., A second generation ductile hybrid fiber reinforced polymer (FRP) for concrete structures, Proc. ICCI '98, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, 1998.
292. Huesgen, R., Flexural behavior of ductile hybrid FRP bars in singly reinforced concrete beams, M.Sc. thesis, Philadelphia: Department of Civil and Architectural Engineering, Drexel University, 1997.
293. ICCI '96, Proc. ICCI '96, Tucson, AZ, January 15-17, 1996.
294. Jaeger, L.G., Mufti, A.A., Tadros, G., The concept of the overall performance factor in rectangular section reinforced concrete members, Proc. 3rd Intl. Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), Vol. 2, Japan Concrete Institute, Sapporo, Japan, 1997.
295. Japanese Society of Civil Engineers (JSCE), Serviceability limit states, recommendations for design and construction of concrete structures using continuous fiber reinforcing materials, Machida, A. (Ed.), JSCE Research Committee on Continuous Fiber Reinforcing Materials, Concrete Engineering Series 23, JSCE, October 1997.
296. Kage, T., Masuda, Y., Tanano, Y., and Sato, K., Long-term deflection of continuous fiber reinforced concrete beams, Proc. 2nd Intl. RILEM Symp. Non-Metallic (FRP) Rein- forcementfor Concrete Structures (FRPRCS-2), Gent, Belgium, 1995.
297. Masmoudi, R., Benmokrane, B., and Challal, O., Cracking behavior of concrete beams reinforced with FRP rebars, Proc. ICCI '96, Tucson, AZ, January 15-17, 1996.
298. Naaman, A.E., Jeong, S.M., Structural ductility of concrete beams prestressed with FRP tendons, Non-metallic (FRP) Reinforcement for Concrete Structures, Proc. 2nd Intl. RILEMSymp. (FRPRCS-2), Taewere, L. (Ed.), London: E & FN Spon, Publishers, 1995.
299. Nanni, A., Henneke, M.J., and Okamoto, T., Tensile properties of hybrid rods for concrete reinforcement, Construction and Building Matls, 8, 1, 27-34, 1994a.
300. Nanni, A., Henneke, M.J., and Okamoto, T., Behavior of hybrid rods for concrete reinforcement, Construction and Building Matls., 8, 2, 89-95, 1994b.
301. Nawy, E.W., Neuwerth, A.M. Fiberglass reinforced concrete beams and slabs, Journal of Structural Division, ASCE, February, pp. 421-440, 1977.
302. Nawy, E.W., Neuwerth, A.M. Behavior of fiberglass reinforced concrete beams, Journal of Structural Division, American Society Civil Engineers, September, pp. 2203-2215, 1971.
303. Ozbolt, J., Mestrovic, D., Li, Y.J., and Eligehausen, R., Compression failure of beams made of different concrete types and sizes, J. Struct. Eng., 200-209, February 2000.
304. Park, R., Paulay, T., Reinforced Concrete Structures, New York: John Wiley & Sons, 1975.
305. Priestley, M.J.N., Seible, F., and Calvi, G.M. Seismic Design and Retrofit of Bridges, New York: John Wiley & Sons, 1996.
306. Proc. ACMBS-II, Montreal, Canada, August 1996.
307. Proc. ACMBS-III, Ottawa, Canada, August 2000.
308. Razaqpur, A.G., and Ali, M.M., A new concept for achieving ductility in FRP reinforced concrete, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, January 15-17, 1996.
309. Somboonsong, W., Development of a class of ductile hybrid FRP reinforcement bar for new and repaired concrete structures, Ph.D. thesis, Philadelphia: Department of Civil and Architectural Engineering, Drexel University, August 1997.
310. Sonobe, Y., Fukuyama, H., Okamoto, T., Kani, N., Kimura, K., Kobayashi, K., Masuda, Y., Matsuzaki, Y., Nochizuki, S., Nagasaka, T,. Shimizu, A., Tanano, H., Tanigaki, M., and Teshigawara, M., Design guidelines of FRP reinforced concrete building structures, J. Composites for Construction, ASCE, 90-115, August 1997.
311. Tamuzs, V., Tepfers, R., Apints, R., Vilks, U., and Modniks, J., Ductility of hybrid fiber composite reinforcement bars for concrete, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, January 15-17, 1996.
312. Theriault, M., Benmokrane, B. Effects of FRP reinforcement ratios and concrete strength on flexural behavior of concrete beams, Journal of Composites for Construction, ASCE, February, pp. 7-16, 1998.
313. Vijay, P.V., Aging Behavior of Concrete Beams Reinforced with GFRP Bars, Ph.D. dissertation, West Virginia University, Morgantown, May 1999.
314. Vijay, P.V., GangaRao, H.V.S., Bending behavior and deformability of glass fiber-reinforced polymer reinforced concrete members, ACIStruct. J., 98(6), 834-842, Novem- ber-December 2001.
315. Vijay, P.V., GangaRao, H.V.S., A unified limit state approach using deformability factors in concrete beams reinforced with GFRP bars, Materials for the New Millennium, 4th Matl. Conf., ASCE, Vol. 1, Washington DC, 1996.
316. Vijay, P.V., GangaRao, H.V.S., Creep behavior of concrete beams reinforced with GFRP bars, Proc. 1st Intl. Conf. Durability of Fiber Reinforced Polymer (FRP) Composites for Construction (CDCC-1998), 1998.
317. Vijay, P.V., GangaRao, H.V.S., Development of fiber reinforced plastics for highway applications (Task A-2)-Aging Behavior of Concrete Beams Reinforced with GFRP Bars, WVDOH RP #T-699-FRP-1, Charleston, WV: West Virginia Department of Transportation, May 1999.
318. Zhao, W., Pilakoutas, K., and Waldron, P. FRP Reinforced Concrete: Cracking Behavior and Determination, Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Third International Symposium, Vol. 2, October 1997, pp. 439-446.
319. Al-Dulaijan, S.U., Nanni, A., Al-Zaharani, M.M., Bakis, C.E., and Boothby, T.E., Bond evaluation of environmentally conditioned GFRP/concrete systems, Proc. 2nd Intl. Conf. Adv. Comp. Mat. in Bridges and Structures, El Badry, M. (Ed.), 1996.
320. Alunno, R.V., Galeota, D., and Giammatteo, M.M., Local bond stress slip relationships of glass fiber reinforced plastic bars embedded in concrete, Materials and Structures, 28(180), 1995.
321. Al-Zaharani, M.M., Bond behavior of fiber reinforced plastic (FRP) reinforcements with concrete, Ph.D. dissertation, University Park, PA: Pennsylvania State University, 1995.
322. Al-Zaharani, M.M., Al-Dulaijan, S.U., Nanni, A., Bakis, C.E., and Boothby, T.E., Evaluation of bond using FRP rods with axisymmetric deformations, Construction and Building Materials, 13, 299-309, 1999.
323. Al-Zaharani, M.M., Nanni, A., Al-Dulaijan, S.U., and Bakis, C.E., Bond of FRP to concrete in reinforcement rods with axisymmetric deformation, Proc. 2nd Int. Conf. Adv. Comp. Mat. in Bridges and Structures, El-Badry, M. (Ed.), 1996.
324. American Concrete Institute (ACI), Building code requirements for structural concrete (ACI 318-02) and commentary (ACI 318R-02), Farmington Hills, MI: American Concrete Institute, 2002.
325. American Concrete Institute (ACI), Guide for the design and construction of concrete reinforced with FRP bars, ACI 440.1R-03, ACI International, Reported by ACI Committee 440, Farmington Hills, MI: American Concrete Institute, 2001.
326. Bakis, C.E., Al-Dulaijan, S.U., Nanni, A., Boothby, T.E., and Al Zahrani, M.M., Effect of cyclic loading in bond behavior of GFRP rods embedded in concrete beams, J. Composite Tech. Res, 20(1), 29-37, 1998.
327. Bakis, C.E., Uppuluri, V.S., Nanni, A., and Boothby, T.E., Analysis of bonding mechanisms of smooth and lugged FRP rods embedded in concrete, Composites Sci. Tech., 58, 1307-1319, 1983.
328. Benmokrane, B., Bond strength of FRP rebar splices, Proc. 3rd Intl. Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), Vol. 2, Japan Concrete Institute, Sapporo, Japan, 1997.
329. Benmokrane, B., Tighiouart, B., and Chaallal, O., Bond strength and load distribution of composite GFRP reinforcing bars in concrete, ACI Mat. J, 93(3), 1996.
330. Boothby, T.E., Nanni, A., Bakis, C.E., and Huang, H., Bond of FRP rods embedded in concrete, Proc. 10th ASCE Eng. Mech. Specialty Conf., May 1995.
331. Chaallal, O., Benmokrane, B., Pullout and bond of glass-fibre rods embedded in concrete and cement grout, Materials and Structures, 26, 1993.
332. Chambers, R.E., Design standard for pultruded fiber-reinforced-plastic (FRP) structures, J. Composites for Construction, ASCE, 1(1), 26-38, 1997.
333. Ciampi, V., Eligehausen, R., Popov, E.P., and Bertero, V.V., Analytical model for deformed bar bond under generalized excitations, Trans. IABSE Coll. Adv. Mech. Reinforced Concrete, Delft, Netherlands, 1981.
334. Cosenza, E., Manfredi, G., and Realfonzo, R., Behavior and modeling of bond of FRP rebars to concrete, J. Composites for Construction, ASCE, 1(2), 40-51, 1997.
335. Cosenza, E., Manfredi, G., and Realfonzo, R., Bond characteristics and anchorage length of FRP reinforcing bars, Proc. 2nd Intl. Conf. Adv. Comp. Mat. in Bridges and Structures, El-Badry, M. (Ed.), 1996.
336. Cosenza, E., Manfredi, G., and Realfonzo, R., Analytical modeling of bond between FRP reinforcing bars and concrete, Proc. 2nd Intl. RILEM Symp. (FRPRCS-2), Taerwe, L. (Ed.), 1995.
337. Cox, J.V., Cochran, K.B., Bond between carbon fiber reinforced polymer bars and concrete, II: computational modeling. Journal of Composites for Construction, 7(2): 164-171, May 2003.
338. Cox, J.V., Guo, J., Modeling the stress state dependency of the bond behavior of FRP tendon, 4th Intl. Symp. FRP forRC Structures, ACISP188-61, Dolan, C.W., Rizkalla, S.H., and Nanni, A. (Eds.), 1999.
339. Cox, J.V., Herrmann, L.R., Confinement stress dependent bond behavior, Part II: A two degree of freedom plasticity model, Proc. Intl. Conf. Bond in Concrete, CEB, 3, Riga, Latvia, 1992.
340. Cox, J.V., Yu, H.A., Micromechanical analysis of the radial elastic response associated with slender reinforcing elements within a matrix, J. Composite Materials, 33(23), 2161-2192, 1999.
341. Daniali, S., Development length for fibre-reinforced plastic bars, Proc. 1st Intl. Conf. Adv. Composite Materials in Bridges and Structures, Neale, K.W., Labossiere, P. (Eds.), 1992.
342. Den Uijl, J.A., Bond and fatigue properties of arapree, Proc. RILEM Intl. Conf. Non-metallic (FRP) Reinforcement for Concrete Structures, Taerwe, L.E., Spon, F.N. (Eds.), London, 1995.
343. Dolan, C.W., Rizkalla, S.H., and Nanni, A. (Eds.), 4th Intl. Symp. Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI SP-188, Farmington Hill, MI: American Concrete Institute, 1999.
344. Ehsani, M.R., Saadatmanesh, H., and Tao, S., Bond of GFRP rebars to ordinary-strength concrete, Proc. Intl. Symp. Fiber Reinforced Plastic Reinforcement for Concrete Structures, ACI SP-138, Nanni, A., Dolan, C.W. (Eds.), 1993.
345. Ehsani, M.R., Saadatmanesh, M., and Tao, S., Design recommendation for bond of GFRP rebars to concrete, J. Struct. Eng., 122 (3), 247-257, 1996a.
346. Ehsani M.R., Saaddatmanesh, M., and Tao, S., Bond behavior and design recommendations for fiber-glass reinforcing bars, Proc. ICCI '96, Saadatmanesh, H., Ehsani, M.R. (Eds.), Tucson, AZ, January 1996b.
347. Eligehausen, R., Popov, E.P., and Bertero, V.V., Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations, Rep. No. 83/23, Earthquake Eng. Res. Ctr. (EERC), Berkeley, CA: University of California, 1983.
348. EUROCOMP, Design Code and Handbook. Structural Design of Polymer Composites, Clarke, J.L.E., Spon, F.N. (Ed.), London: Chapman and Hall, 1996.
349. Faoro, M., Bearing and deformation behavior of structural components with reinforcements comprising resin bounded glass fibre bars and conventional ribbed steel bars, Proc. Intl. Conf. Bond in Concrete, CEB, 3, Riga, Latvia, 1992.
350. Faza, S.S., Bending and bond behavior and design of concrete beams reinforced with fiber reinforced plastic rebars, Ph.D. dissertation, Morgantown, WV: West Virginia State University, 1991.
351. Faza, S.S., GangaRao, H.V.S., Bending and bond behavior of concrete beams reinforced with fiber reinforced plastic rebars, Transportation Res. Rec. 1290, 185-193, 1990.
352. Focacci, F., Nanni, A., and Bakis, C.E., Local bond-slip relationship for FRP reinforcement in concrete, J. Composites for Construction, ASCE, 4(1): 24-31, February 2000.
353. Freimanis, A.J., Bakis, C.E., Nanni, A., and Gremel, D., A comparison of pullout tests and tensile behaviors of FRP reinforcement for concrete, Proc. ICCI '98, Vol. II, Saadat- manesh, H., Ehsani, M.R. (Eds.), Tucson, AZ: University of Arizona, 1998.
354. FRPRCS I, Fiber-reinforced-plastic (FRP) reinforcement for concrete structures: properties and applications, Nanni, A. (Ed.), St. Louis, MO: Elsevier, 1993.
355. FRPRCS IV, 4th Intl. Symp. Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI, SP-188, Dolan, C.W., Rizkalla, S.H., Nanni, A. (Eds.), Farmington Hills, MI: American Concrete Institute, 1999.
356. GangaRao, H.V.S., Vijay, P.V., Gupta, R.K., and Barbero, E., FRP composites application for non-ductile structural systems: Short and long-term behavior, Submitted to CERL, U.S. Army Corps of Engineers, Morgantown, WV: Constructed Facilities Center, West Virginia University, 2001.
357. Gao, D., Benmokrane, B., and Tigheourt, B., Bond properties of FRP bars to concrete, Technical report, Department of Civil Engineering, University of Sherbrooke, Quebec, Canada, 1998.
358. Guo, J., Cox, J.V., An interface model for the mechanical interaction between FRP bars and concrete, J. Reinforced Plastics and Composites, 1999.
359. Hattori, A., Inoue, S., Miyagawa, T., and Fujii, M.A., Study on bond creep behavior of frp rebars embedded in concrete, Proc. 2nd Intl. RILEM Symp. (FRPRCS-2), Taerwe, L. (Ed.), 1995.
360. Honma, M., Maruyama, T., Bond properties of carbon fiber reinforced plastic rods at elevated temperatures, Proc. Arch. Inst. of Japan Convention, C (in Japanese), 1989.
361. Itoh, S., Maruyama, T., and Nishiyama, H., Study of bond characteristics of deformed fiber reinforced plastic rods, Proc. Japan Concrete Inst., 11(1) (in Japanese), 1989.
362. Japanese Society of Civil Engineers (JSCE), Application of continuous fiber reinforcing materials to concrete structures, Subcommittee on Continuous Fiber Reinforcing Materials, Concrete Library International of JSCE, No. 19, Tokyo, 1992a.
363. Japanese Society of Civil Engineers (JSCE), Utilization of concrete FRP rods for concrete reinforcement, Proc. Japanese Society of Civil Engineers, Tokyo, Japan, 1992b.
364. Japanese Society of Civil Engineers (JSCE), Recommendations for design and construction for concrete structures using continuous fiber reinforcing materials, Concrete Engineering Series, No. 23, Tokyo, 1997.
365. Kachlakev, D.I., Bond strength investigations and structural applicability of composite fiber- reinforced polymer (FRP bars), Ph.D. dissertation, Corvallis, OR: Oregon State University, 1997.
366. Kachlakev, D.I., Lundy, J.R., Performance of hollow glass fiber-reinforced polymer bars, J. Composites for Construction, ASCE, 3(2): 87-91, May 1999.
367. Kanakubo, T., Yonemaru, K., Fukuyama, H., Fujisawa, M., and Sonobe, Y., Bond performance of concrete members reinforced with FRP bars, Proc. Intl. Symp. Fiber Reinforced Plastic Reinforcement for Concrete Structures, ACI SP-138, Nanni, A., Dolan, C.W. (Eds.), 1993.
368. Katz, A., Bond to concrete of FRP rebars after cyclic loading, J. Composites for Construction, ASCE, 4(3): 137-144, August 2000.
369. Larralde, J., Silva Rodriguez, R., Bond and slip of FRP rebars in concrete, J. Mat. in Civ. Eng, ASCE, 5(1), 1993.
370. Makitani, E., Irisawa, I., and Nishiura, N., Investigation of bond in concrete member with fiber reinforced plastic bars, Proc. Intl. Symp. Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, ACI SP-138, Nanni, A., Dolan, C.W. (Eds.), Vancouver, 1993.
371. Malvar, L.J., Bond of reinforcement under controlled confinement ACI Materials J., 89(6), 593-601, 1992.
372. Malvar, L.J., Bond stress-slip characteristics of FRP rebars, Rep. TR-2013 SHR, Port Huen- eme, CA: Naval Facilities Engineering Service Center, 1994.
373. Malvar, L.J., Tensile and bond properties of GFRP reinforcing bars, ACI Materials J, 92(3), 276-285, 1995.
374. Mashima, M., Iwamoto, K., Bond characteristics of FRP rod and concrete after freezing and thawing deterioration, Proc. Intl. Symp. Fiber-Reinforced-Plastic Reinforcement for Concrete Structures, ACI SP-138, Nanni, A., Dolan, C.W. (Eds.), 1993.
375. Nanni, A. (Ed.), Fiber-reinforced-plastic (FRP) reinforcement for concrete structures: Properties and applications, Developments in Civil Engineering, Vol. 42, St. Louis, MO: Elsevier.
376. Nanni, A, Al-Zaharani, M.M., Al-Dulaijan, S.U., Bakis, C.E., and Boothby, T.E., Bond of FRP reinforcement to concrete: experimental results, Proc. 2nd Intl. RILEM Symp. (FRPRCS-2), Taerwe, L. (Ed.), 1995.
377. Nawy, E.G., Reinforced Concrete: A Fundamental Approach, 5th ed., Upper Saddle River, NJ: Prentice Hall, 2002.
378. Noghabai, K., Splitting of concrete in the anchoring zone of deformed bars, Licentiate Thesis, 26L, Div. of Struct. Eng., Lulea University of Technology, Sweden, 1995.
379. Ohnstad, T.S., Kachlakev, D.I., Hollow FRP rebar - Its unique manufacturing process and applications, Proc. 46th Intl. SAMPE Symp., Vol. 46: A Materials and Processes Odyssey, Paper code: 46-064, 2001.
380. Orungun, C., Jirsa J.O., and Breen J.E., A reevaluation of test data on development length and splices, Proc. ACI J., 74, 3, 114-122, March 1977.
381. Park, R., Paulay, T., Reinforced Concrete Structures, New York: John Wiley & Sons, 1975.
382. Pleimann, L.G., Tension and bond pullout tests of deformed fiberglass rods, Final Report for Marshall-Vega Corporation, Fayetteville, AK: Civil Engineering Department, University of Arkansas, 1987.
383. Pleimann, L.G., Strength, modulus of elasticity, and bond of deformed FRP rods, Proc. Specialty Conf. Adv. Composite Matls. in Civil Eng. Structures, Materials Engineering Division, American Society of Civil Engineers, 1991.
384. Rossetti, A.V., Galeota, D., and Giammatteo, M.M., Local bond stress-slip relationships of glass fibre reinforced plastic bars embedded in concrete, Materials and Structures, 28(180), 1995.
385. Soroushian, P., Choi, K.B., Park, G.H., and Aslani, F., Bond of deformed bars to concrete: Effects of confinement and strength of concrete, ACI Materials J, 88(3), 1991.
386. Taly, N., Design of Reinforced Masonry Structures, New York: McGraw-Hill, 2001.
387. Taly, N., GangaRao, H.V.S., Bond behavior of FRP reinforcing bars, the-state-of-the-art, Proc. 45th SAMPE (Society for the Advancement of Materials and Process Engineering) Intl. Conf., Long Beach, CA, May 6-10, 2001.
388. Tepfers, R., Molander, I., and Thalenius, K., Experience from testing of concrete reinforced with carbon fiber and aramid fiber strands, XIV, Nordic Concrete Cong., Nordic Concrete Ind. Mtg., August 1992.
389. Tighiouart, B., Benmokrane, B., and Gao, D., Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars, Construction and Building Materials, 12, 453-462, 1998.
390. Tomosawa, F., Nakatsuji, T., Evaluation of ACM reinforcement durability by exposure test, Proc. 3rd Intl. Symp. Non-Metallic FRP Reinforcement for Concrete Structures, Vol. 2, Japan Concrete Institute, Tokyo, 1997.
391. Uppuluri, V.S., Bakis, C.E., Nanni, A., and Boothby, T.E., Finite element modeling of the bond between fiber reinforced plastic (FRP) reinforcement and concrete, Report CMTC-9602, Composites Manufacturing Technology Center, University Park, PA: Pennsylvania State University, 1996.
392. Vijay, P.V., GangaRao, H.V.S., Unified limit state approach using deformability factors in concrete beams reinforced with GFRP bars, Proc. 4th Matls. Eng. Conf, 1999.
393. Vijay, P.V., GangaRao, H.V.S., Development of fiber reinforced plastics for highway application: Aging behavior of concrete beams with GFRP bars, CFC-WVU Report No. 99-265 (WVDOT Rep. No. 699-FRP1), Department of Civil and Environmental Engineering, Morgantown, WV: West Virginia University, 1999.
394. Yonezawa, T., Ohno, S., Kakizawa, T., Inoue, K., Fukata, T., and Okamoto, R., A new threedimensional FRP reinforcement: Fiber-reinforced-plastic (FRP) for concrete structures: Properties and applications, Nanni, A. (Ed.), St. Louis, MO: Elsevier, 1993.
395. Yu, H., Cox, J.V., Radial elastic modulus for the interface between FRP reinforcing bars and concrete, J. Reinforced Plastics and Composites, 21(14): 1285-1318, 2002.
396. American Concrete Institute (ACI), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI 440.1R-03, ACI Committee 440, Farmington Hills, MI: American Concrete Institute, 2003.
397. American Concrete Institute (ACI), Deflection of Concrete Structures, ACI Special Publication SP-43 (ACI SP-43), ACI Committee 440, Farmington Hills, MI: American Concrete Institute, 1974a.
398. American Concrete Institute (ACI), Consideration for design of concrete structures subjected to fatigue loading, Report by ACI Committee 215, ACI J., 71, 97-121, March 1974b.
399. American Concrete Institute (ACI), Abeles symposium: fatigue of concrete, ACI Special Publication SP-41, Farmington Hills, MI: American Concrete Institute, 1974c.
400. American Concrete Institute (ACI), Analysis of concrete bridges, ACI Report 343R-77, ACI Committee 343, Farmington Hills, MI: American Concrete Institute, 1977.
401. American Concrete Institute (ACI), Fatigue of concrete structures, ACI Special Publication SP-75, Farmington Hills, MI: American Concrete Institute, 1982.
402. Benmokrane, B., Challal, O., and Masmoudi, R., Flexural response of concrete beams reinforced with FRP bars, ACI Struct. J., 93, 1, 46-55, January-February 1996.
403. Bischoff, P.H., Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars, J. Struct. Eng., 131, 5, 752-767, May 2005.
404. Branson, D.E., Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams, HPR Report No. 7, Part I, Alabama Highway Department, Bureau of Public Roads, Auburn, AL: Department of Civil Engineering and Auburn Research Foundation, Auburn University, 1965.
405. Branson, D.E., Deformation of Concrete Structures, New York: McGraw-Hill, 1977.
406. Brown, V., Sustained load deflections in GFRP reinforced beams, Proc. 3rd Intl. Symp. NonMetallic (FRP) Reinforcement for Concrete Structures (FRPRCS-3), v.2, Japan Concrete Institute, Sapporo, Japan, 1997.
407. CSA 1996. Canadian Highway Bridge Design Code-Section 16: Fiber Reinforced Structures, Canadian Standard Association.
408. Gao, D., Benmokrane, B., and Masmoudi, R., A calculating method of flexural properties of FRP-reinforced concrete beam: Part 1: Crack width and deflection, Technical Report, Department of Civil Engineering, University of Sherbrook, Sherbrook, Quebec, Canada, 1998.
409. Faza, S.S., GangaRao, H.V.S., Theoretical and experimental correlation of behavior of concrete beams reinforced with fiber reinforced plastic rebars, Fiber-Reinforced- Plastic Reinforcement for Concrete Structures, SP-138, Nanni, A., Dolan, C.W. (Eds.), Farmington Hills, MI: American Concrete Institute, 1993.
410. Kage, T., Masuda, Y., Tanano, Y., and Sato, K., Long-term deflection of continuous fiber reinforced concrete beams, Proc. 2nd Intl. RILEM Symp. Non-Metallic (FRP) Reinforcement for Concrete Structures, Ghent, Belgium, 1995.
411. Kumar, S., and GangaRao, H.V.S., Fatigue response of concrete decks reinforced with FRP rebars, J. Struct. Eng., ASCE, 124, 1, 11-16, January 1998.
412. Masmoudi, R., Benmokrane, B., and Challal, O., Cracking behavior of concrete beams reinforced with FRP rebars, Proc. ICCI '96, Tucson, AZ, 1996.
413. National Research Council, Life prediction methodologies for composite materials, NMAB- 460, Washington, DC: National Materials Advisory Board, 1991.
414. Nilson, A. H., Winter, G., Design of Concrete Structures, New York: John Wiley & Sons, 1991.
415. Vijay, P.V., GangaRao, H.V.S., Creep behavior of concrete beams reinforced with GFRP bars, Proc. CDCC '98, Benmokrane, B., Rahman, H. (Eds.), Sherbrooke, Quebec, Canada, August 5-7, 1998.
416. Vijay, P.V., GangaRao, H.V.S., Development of fiber reinforced plastics for highway application: Aging behavior of concrete beams reinforced with GFRP bars, CFC- WVU Report No. 99-265, WVDOH RP No. T-699-FRP1, Morgantown, WV: Department of Civil and Environmental Engineering, West Virginia University, 1999.