Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars

Journal of Structural Engineering

Volumn 131, Issue 5, 2005, Pages 752-762

  Bischoff, Peter H ^a  

^a UNIVERSITY OF NEW BRUNSWICK   (Canada)

Author keywords

Beams; Concrete, reinforced; Deflection; Steel

Indexed keywords

BARS (METAL); DEFLECTION (STRUCTURES); EVALUATION; FIBER REINFORCED METALS; POLYMERS; REINFORCEMENT; STEEL; STIFFNESS; TENSILE TESTING;

FIBER REINFORCED POLYMER BARS; LINEAR INELASTIC; REEVALUATION; TENSION STIFFENING;

CONCRETE BEAMS AND GIRDERS;

EID: 18144410996     PISSN: 07339445     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0733-9445(2005)131:5(752)     Document Type: Article

References (47)

1. ACI Committee 224. (1986). "Cracking of concrete members in direct tension (ACI Committee 224 Report, ACI 224.2R-86)." ACI J., 83(1), 3-13.
2. ACI Committee 318. (2002). "Building code requirements for structural concrete (ACI 318-02) and commentary (ACI 318R-02)." ACI, Farmington Hills, Mich.
3. ACI Committee 440. (2003). "Guide for the design and construction of concrete reinforced with FRP bars." ACI 440.1R-03, ACI, Farmington Hills, Mich.
4. Al-Shaikh, A. H., and Al-Zaid, R. Z. (1993). "Effect of reinforcement ratio on the effective moment of inertia of reinforced concrete beams." ACI Struct. J., 90(2), 144-149.
5. Bischoff, P. H. (2001). "Effects of shrinkage on tension stiffening and cracking in reinforced concrete." Can. J. Civ. Eng., 28(3), 363-374.
6. Bischoff, P. H., and Paixao, R. (2004). "Tension stiffening and cracking of concrete reinforced with glass fiber reinforced polymer (GFRP) bars." Can. J. Civ. Eng., 31(4), 579-588.
7. Branson, D. E. (1965). "Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams." HPR Report No. 7, Part 1, Alabama Highway Department, Bureau of Public Roads, Alab. (Dept. of Civil Engineering and Auburn Research Foundation, Auburn Univ., Aug. 1963).
8. Branson, D. E. (1977). Deformation of concrete structures, McGraw-Hill, New York.
9. Brown, V. L., and Bartholomew, C. L. (1996). "Long-term deflections of GFRP-reinforced concrete beams." Fiber Composites in Infrastructure: Proc., 1st Int. Conf. on Composites in Infrastructure, ICCI'96, H. Saadatmanesh and M. R. Ehsani, eds., Tuscon, Ariz., 389-400.
10. CSA. (2002). "Design and construction of building components with fibre-reinforced polymers." CSA Standard S806-02, CSA, Rexdale (Toronto), Ontario.
11. CSA. (2004). "Design of concrete structures." CSA Standard A23.3-04, CSA, Rexdale (Toronto), Ontario.
12. Collins, M. P., and Mitchell, D. (1991). Prestressed concrete structures, Prentice-Hall, Englewood Cliffs, N.J.
13. CEB-FIP. (1978). CEB-FIP model code for concrete structures (MC78), 3rd Ed., Comité Euro-International du Béton (CEB), Paris.
14. CEB-FIP. (1993). CEB-FIP model code (MC-90), Comité Euro-International du Béton (CEE), Thomas Telford, London.
15. Dolan, C. W. (1989). "Prestressed concrete using Kevlar reinforced tendons." PhD thesis, Cornell Univ., N. Y.
16. Engel, R. S., Croyle, M. G., Bakis, C. E., and Nanni, A. (1999). "Deflection of reinforced concrete beams reinforced by fiber reinforced polymer grids with various joint designs." Proc., 4th Int. Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, ACI SP 188, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., ACI, Farmington Hills, Mich., 75-85.
17. European Committee for Standardization (CEN). (1991). "Eurocode 2: Design of concrete structures Part 1-1: General rules for buildings." European Prestandard, DD ENV 1992-1-1, European Committee for Standardization (CEN), Brussels.
18. Farra, B., and Jaccoud, J.-P. (1992). "Bond behaviour, tension stiffening, and crack prediction of high strength concrete." Bond in Concrete: From Research to Practice, CEB-RTU International Conf., Riga Technical Univ., Riga, Latvia, 3(7-12), 9-1 to 9-10.
19. Faza, S. S., and GangaRao, H. V. S. (1992). "Pre- and postcracking deflection behaviour of concrete beams reinforced with fibre-reinforced plastic rebars." Advanced Composite Materials in Bridges and Structures, K. W. Neale and P. Labossiere, eds., Canadian Society for Civil Engineering, Montreal, Quebec, 151-160.
20. Fields, K., and Bischoff, P. H. (2004). "Tension stiffening and cracking of high strength reinforced concrete tension members." ACI Struct. J., 101(4), 447-456.
21. Gao, D., Benmokrane, B., and Masmoudi, R. (1998). "A calculating method of flexural properties of FRP-reinforced concrete beam: Part 1: Crack width and deflection." Tech. Rep., Dept. of Civil Engineering, Univ. of Sherbrooke, Quebec, Canada.
22. Ghali, A. (1993). "Deflection of reinforced concrete members: A critical review." ACI Struct. J., 90(4), 364-373.
23. Ghali, A., and Favre, R. (1994). Concrete structures: Stresses and deformations, 2nd Ed., E & FN Spon, London.
24. Ghali, A., Hall, T., and Bobey, W. (2001). "Minimum thickness of concrete members reinforced with fibre reinforced polymer bars." Can. J. Civ. Eng., 28(4), 583-592.
25. Gilbert, R. I. (1988). Time effects in concrete structures, Elsevier, Amsterdam.
26. Gilbert, R. I. (2001). "Deflection calculation and control - Australian code amendments and improvements." Code Provisions for Deflection Control in Concrete Structures, SP-203, E. G. Nawy and A. Scanlon, eds., ACI, Mich., 45-77.
27. Gilbert, R. I., and Warner, R. F. (1977). "Nonlinear analysis of reinforced concrete slabs with tension stiffening." UNICIV Rep. No. R-167, Studies from the School of Civil Engineering, Univ. of New South Wales, Kensington, Australia.
28. Goto, Y. (1971). "Cracks formed in concrete around deformed tension bars." ACI J., 68(4), 244-251.
29. ISIS Canada. (2001). Reinforcing concrete structures with fibre reinforced polymers, Design Manual No. 3, ISIS Canada, Winnipeg, Manitoba.
30. Masmoudi, R., Thériault, M., and Benmokrane, B. (1998). "Flexural behavior of concrete beams reinforced with deformed fiber reinforced plastic reinforcing rods." ACI Struct. J., 95(6), 665-676.
31. Murashev, V. I. (1940). "Theory of appearance and opening of cracks, computation of rigidity of reinforced concrete members." Stroitelnaya Promishlenost (Moscow), 11.
32. Murashev, V. I., Sigalov, E. E., and Baikov, V. N. (1971). Design of reinforced concrete structures, 2nd Ed., Translation of Zhelezobetonnye konstruktsii, MIR Publishers, Moscow.
33. Nanni, A. (1993). "Flexural behavior and design of RC members using FRP reinforcement." J. Struct. Eng., 119(11), 3344-3359.
34. Nawy, E. G., and Neuwerth, G. E. (1977). "Fiberglass reinforced concrete slabs and beams." J. Struct. Div. ASCE, 103(2), 421-440.
35. Nemirovsky, J. M. (1949). "Rigidity of flexural loaded reinforced concrete members and opening of cracks." Central Research Institute for Building Design (TsNIPS), Research Results for Conventional and Prestressed Reinforced Concrete Construction, Collected Papers, Stroiisdat, State Publication for Construction Literature (Moscow).
36. Newhook, J., Ghali, A., and Tadros, G. (2002). "Concrete flexural members reinforced with fiber reinforced polymer: Design for cracking and deformability." Can. J. Civ. Eng., 29(1), 125-134.
37. Rangan, B. V., and Sarker, P. K. (2001). "Bending stiffness of concrete flexural members reinforced with high strength steel." Code Provisions for Deflection Control in Concrete Structures, SP-203, E. G. Nawy and A. Scanlon, eds., ACI, Mich., 143-156.
38. Rao, P. S. (1966). "Die Grundlagen zur Berechnung der bei statisch unbestimmten Stahlbetonkonstruktionen im plastischen Bereich auftretenden Umlagerungen der Schnittkräfte (Basic laws governing moment redistribution in statically indeterminate reinforced concrete structures)." DAfStb, Ernst & Sohn, Berlin, Heft 177.
39. Rasheed, H. A., Nayal, R., and Melhem, H. (2004). "Response prediction of concrete beams reinforced with FRP bars." Compos. Struct., 65(2), 193-204.
40. Razaqpur, A. G., Svecova, D., and Cheung, M. S. (2000). "Rational method for calculating deflection of fiber-reinforced polymer reinforced beams." ACI Struct. J., 97(1), 175-185.
41. Scanlon, A., Lee, J. C., and Bischoff, P. H. (2004). "Tension stiffening models for analysis of concrete structures with steel and FRP reinforcement." 5th Structural Specialty Conf. of the Canadian Society for Civil Engineering (CD-Rom), CSCE, Saskatoon, Canada, ST 049 1-8.
42. Standards Australia. (1994). "Australian standard for concrete structures." AS3600, Standards Australia, Sydney, Australia.
43. Thériault, M., and Benmokrane, B. (1998). "Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams." J. Compos. Constr., 2(1), 7-16.
44. Toutanji, H. A., and Saafi, M. (2000). "Flexural behavior of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars." ACI Struct. J., 97(5), 712-719.
45. Washa, G. W., and Fluck, P. G. (1952). "Effect of compressive reinforcement on the plastic flow of reinforced concrete beams." ACI J., 49(8), 89-108.
46. Yost, J. R., Gross, S. P., and Dinehart, D. W. (2003). "Effective moment of inertia for glass fiber-reinforced polymer-reinforced concrete beams." ACI Struct. J., 100(6), 732-739.
47. Yu, W.-W., and Winter, G. (1960). "Instantaneous and long-time deflections of reinforced concrete under working loads." ACI J., 57(1), 29-50.