Intermediate crack-induced debonding in RC beams and slabs

Construction and Building Materials

Volumn 17, Issue 6-7, 2003, Pages 447-462

  Teng, J G ^a   Smith, S T ^b   Yao, J ^a   Chen, J F ^c  

^a HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

^b UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

^c UNIVERSITY OF EDINBURGH   (United Kingdom)

Author keywords

Debonding; Fibre reinforced polymer; FRP; RC beams; RC cantilever slabs; Retrofitting; Strengthening

Indexed keywords

CRACKS; DEBONDING; FIBER REINFORCED PLASTICS; PLATES (STRUCTURAL COMPONENTS); REINFORCED CONCRETE; RETROFITTING; STRESSES;

CRACK-INDUCED DEBONDING;

BEAMS AND GIRDERS;

EID: 0141659633     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0950-0618(03)00043-6     Document Type: Conference Paper

References (60)

1. Teng J.G., Chen J.F., Smith S.T., Lam L. FRP-strengthened RC structures. 2002;245 John Wiley and Sons, Chichester, West Sussex, UK.
2. Garden H.N., Quantrill R.J., Hollaway L.C., Thorne A.M., Parke G.A.R. An experimental study of the anchorage length of carbon fibre composite plates used to strengthen reinforced concrete beams. Constr Build Mater. 12:1998;203-219.
3. Meier U. Strengthening of structures using carbon fibre/epoxy composites. Constr Build Mater. 9:(6):1995;341-351.
4. Ritchie P.A., Thomas D.A., Lu L.W., Connely G.M. External reinforcement of concrete beams using fiber reinforced plastics. ACI Struct J. 88:(4):1991;490-500.
5. Smith S.T., Teng J.G. Shear-bending interaction in debonding failures of FRP-plated RC beams. Adv Struct Eng. 6:(3):2003;183-200.
6. Triantafillou T.C., Plevris N. Strengthening of RC beams with epoxy-bonded fibre-composite materials. Mater Struct. 25:1992;201-211.
7. Ahmed, O, van Gemert, D. Effect of longitudinal carbon fiber reinforced plastic laminates on shear capacity of reinforced concrete beams, in: Dolan CW, Rizkalla SH, Nanni A. (Eds.) Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, 1999, pp. 933-943.
8. Jansze, W. Strengthening of RC Members in Bending by Externally Bonded Steel Plates, PhD Thesis, Delft University of Technology, Delft, 1997.
9. Oehlers D.J. Reinforced concrete beams with plates glued to their soffits. J Struct Eng ASCE. 118:(8):1992;2023-2038.
10. Raoof, M, Hassanen, MAH. Peeling failure of reinforced concrete beams with fibre-reinforced plastic or steel plates glued to their soffits, Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 140, August 2000, pp. 291-305.
11. Raoof, M, Zhang, S. An insight into the structural behaviour of reinforced concrete beams with externally bonded plates, Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 122, November 1997, pp. 477-492.
12. Saadatmanesh H., Malek A.M. Design guidelines for flexural strengthening of RC beams with FRP plates. J Compos Constr ASCE. 2:(4):1998;158-164.
13. Tumialan, G, Belarbi, A, Nanni, A. Reinforced concrete beams strengthened with CFRP composites: failure due to concrete cover delamination, Department of Civil Engineering, Center for Infrastructure Engineering Studies, Report No. CIES-99/01, University of Missouri-Rolla, USA, 1999.
14. Varastehpour H., Hamelin P. Strengthening of concrete beams using fiber-reinforced plastics. Mater Struct. 30:1997;160-166.
15. Wang, CY, Ling, FS. Prediction model for the debonding failure of cracked RC beams with externally bonded FRP sheets, in: Saadatmanesh H, Ehsani MR. (Eds.), Proceedings of the Second International Conference of Composites in Infrastructure (ICCI 98), Arizona, USA, 1998, pp. 548-562.
16. Ziraba Y.N., Baluch M.H., Basunbul I.A., Sharif A.M., Azad A.K., Al-Sulaimani G.J. Guidelines towards the design of reinforced concrete beams with external plates. ACI Struct J. 91:(6):1994;639-646.
17. Smith S.T., Teng J.G. FRP-strengthened RC structures. I: review of debonding strength models. Eng Struct. 24:(4):2002;385-395.
18. Smith S.T., Teng J.G. FRP-strengthened RC structures. II: assessment of debonding strength models. Eng Struct. 24:(4):2002;397-417.
19. Niu, H, Wu, Z. Peeling-off criterion for FRP-strengthened R/C flexural members, in: Teng JG., (Ed.) Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 571-578.
20. Sebastian W.M. Significance of mid-span debonding failure in FRP-plated RC beams. J Struct Eng ASCE. 127:(7):2001;792-798.
21. Seracino, R. Axial intermediate crack debonding of plates glued to concrete surfaces, in: Teng JG.(Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 365-372.
22. Teng, JG, Smith, ST, Yao, J, Chen, JF. Strength model for intermediate flexural crack induced debonding in RC beams and slabs, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 579-587.
23. Leung C.K.Y. Delamination failure in concrete beams retrofitted with a bonded plate. J Mater Civil Eng ASCE. 13:(2):2001;106-113.
24. Chen J.F., Teng J.G. Anchorage strength models for FRP and steel plates bonded to concrete. J Struct Eng ASCE. 127:(1):2001;784-791.
25. Oehlers, DJ, Seracino, R, Kim, KB, Park, SM. Design rules for steel plating beams and slabs that can be applied to FRP plating, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 197-206.
26. Holzenkämpfer, O. Ingenieurmodelle des Verbundes geklebter Bewehrung für Betonbauteile, Dissertation, TU Braunschweig, 1994.
27. Leung, CKY, Tung, WK. A three-parameter model for debonding of FRP from concrete substrate, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 272-373.
28. Yuan H., Wu Z.S., Yoshizawa H. Theoretical solutions on interfacial stress transfer of externally bonded steel/composite laminates. J Struct Mech Earthquake Eng JSCE. 675:(1-55):2001;27-39.
29. Yang, ZJ, Chen, JF, Proverbs D., Numerical Simulation of Concrete Cover Separation in FRP Strengthened RC Beams, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 617-624.
30. Teng J.G., Lam L., Chan W., Wang J. Retrofitting of deficient RC cantilever slabs using GFRP strips. J Compos Constr ASCE. 4:(2):2000 May;75-84.
31. Teng J.G., Cao S.Y., Lam L. Behaviour of GFRP-strengthened RC cantilever slabs. Constr Build Mater. 15:(7):2001, October;339-349.
32. Yao, J, Teng, JG, Lam, L. Debonding in RC cantilever slabs strengthened with FRP strips', Proceedings of the International Conference on Advanced Polymer Composites for Structural Applications in Construction, Southampton University, UK, 15-17 April 2002, pp. 125-133.
33. Rahimi H., Hutchinson A. Concrete beams strengthened with externally bonded FRP plates. J Compos Constr ASCE. 5:(1):2001;44-56.
34. Swamy, RN, Mukhopadhyaya, P. Debonding of carbon-fibre-reinforced polymer plate from concrete beams, Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol. 134, November, 1999, pp. 301-317.
35. Chen J.F., Yang Z.J., Holt G.D. FRP or steel plate-to-concrete bonded joints: effect of test methods on experimental bond strength. Steel Compos Struct-An Int J. 1:(2):2001;231-244.
36. Neubauer, U, Rostásy, FS. Design aspects of concrete structures strengthened with externally bonded CFRP plates, Proceedings of the 7th International Conference on Structural Faults and Repairs, Vol. 2, ECS Publications, Edinburgh, 1997, pp. 109-118.
37. Täljsten B. Defining anchor lengths of steel and CFRP plates bonded to concrete. Int J Adhesion Adhes. 17:(4):1997;319-327.
38. Chaallal O., Nollet M.J., Perraton D. Strengthening of reinforced concrete beams with externally bonded fibre-reinforced-plastic plates: design guidelines for shear and flexure. Can J Civil Eng. 25:(4):1998;692-704.
39. Maeda, T, Asano, Y, Sato, Y, Ueda, T, Kakuta, Y. A study on bond mechanism of carbon fiber sheet', Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the 3rd International Symposium, Vol. 1, Japan Concrete Institute, Sapporo, Japan, 1997, pp. 279-285.
40. van Gemert D. Force transfer in Epoxy-bonded steel-concrete joints. Int J Adhesion Adhes. (1):1980;67-72.
41. BS 8110 Structural Use of Concrete, Part 1. Code of Practice for Design and Construction, British Standards Institution, 1997, London, UK.
42. Arduini M., Nanni A. Behavior of pecracked RC beams strengthened with carbon FRP sheets. J Compos Constr ASCE. 1:(2):1997;63-70.
43. Lopez, M, Naaman, AE., Till, RD. Bending behavior of reinforced concrete beams strengthened with carbon fiber reinforced polymer laminates and subjected to freeze-thaw cycles, in: Dolan CW, Rizkalla SH, Nanni A. (Eds.), Proceeding, Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, 1999, pp. 559-576.
44. Tumialan, G, Serra, P, Nanni, A, Belarbi, A. Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets, in: Dolan C.W., Rizkalla S.H., Nanni A. (Eds.), Proceedings of the Fourth International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Maryland, USA, 1999, pp. 725-735.
45. Chen J.F., Teng J.G. Shear capacity of FRP-strengthened RC beams: FRP debonding. Constr Build Mater. 17:(1):2003;27-41.
46. Chen J.F., Teng J.G. Shear capacity of FRP-strengthened RC beams: FRP rupture. Journal of Structural Engineering, ASCE. 129:(5):2003;615-625.
47. ACI Committee 440 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, 2002.
48. Concrete Society Design Guidance for Strengthening Concrete Structures Using Fibre Composite Materials, Concrete Society Technical Report No. 55, Berkshire, UK, 2000.
49. fib Externally Bonded FRP Reinforcement for RC Structures, The International Federation for Structural Concrete, Lausanne, Switzerland, 2001.
50. Smith, ST, Teng, JG Debonding failures in FRP-plated RC beams with or without U strip end anchorage, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 607-615.
51. Al-Sulaimani G.J., Sharif A.M., Basunbul I.A., Baluch M.H., Ghaleb B.N. Shear repair for reinforced concrete by fibreglass plate bonding. ACI Struct J. 91:(3):1994;458-464.
52. Kachlakev, DI, Barnes, WA. Flexural and shear performance of concrete beams strengthened with fibre reinforced polymer laminates, Proceedings of the Fourth International Symposium on Fibre Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI publications SP-188, 1999, pp. 959-971.
53. Kachlakev D.I. Horsetail creek bridge: design method calibration and experimental results of structural strengthening with CFRP and GFRP laminates. Adv Struct Eng. 5:(2):2002;87-98.
54. Kamiharako, A, Maruyama, K, Takada, K, Shimomura, T. Evaluation of shear contribution of FRP sheets attached to concrete beams', Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the 3rd International Symposium, Vol. 1, Japan Concrete Institute, Sapporo, Japan, 1997, pp. 467-474.
55. Lam L., Teng J.G. Strength of RC cantilever slabs bonded with GFRP strips. J Compos Constr ASCE. 5:(4):2001 November;221-227.
56. Blaschko, M. Anchoring device for FRP strips, in: Teng JG. (Ed.), Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, 2001, pp. 1255-1262.
57. ACI 318-95 Building Code Requirements for Structural Concrete (318-95) and Commentary (318R-95), American Concrete Institute (ACI), Fifth Printing, Michigan, USA, 1999.
58. Bonacci J.F., Maalej M. Externally bonded fiber-reinforced polymer for rehabilitation of corrosion damaged concrete beams. ACI Struct J. 97:(5):2000;703-711.
59. Kong F.K., Evans R.H. Reinforced and prestressed concrete. 3rd ed: 1987;Chapman and Hall, London, UK.
60. Saadatmanesh H., Ehsani M.R. RC Beams strengthened with GFRP plates. I: experimental study. J Struct Eng. 117:(11):1991;3417-3433.