On the correlation between NOx emissions and the diesel premixed burn

SAE Technical Papers

Volumn , Issue , 2004, Pages

  Musculus, Mark P B ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADIABATIC FLAME TEMPERATURE; ENGINE CYLINDERS; HEAT TRANSFER; IGNITION; LUMINANCE; MIXTURES; REDUCTION; SOOT; TEMPERATURE; THERMOANALYSIS;

CALCULATED ADIABATIC FLAME TEMPERATURE; COMPRESSION HEATING; FLAME TEMPERATURES; IN-CYLINDER MECHANISMS; INTAKE TEMPERATURE; PREMIXED COMBUSTION; RADIATIVE HEAT TRANSFER; THERMO DYNAMIC ANALYSIS;

DIESEL ENGINES;

EID: 85072436177     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2004-01-1401     Document Type: Conference Paper

References (68)

1. "Control of Air Pollution from New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements," Federal Register, 66, No. 12, pp. 50052001.
2. Johnson, T. V., "Diesel Emission Control in Review-The Last 12 Months," SAE Paper 2003-01-0039, 2003.
3. "Final Report: Meeting Technology Challenges for the 2007 Heavy-Duty Highway Diesel Rule," Clean Diesel Independent Review Subcommittee of the Clean Air Act Advisory Committee, 2002.
4. Pfeifer, A., Krueger, M., Gruetering, U., and Tomazic, D., "U.S. 2007-Which Way to Go? Possible Technical Solutions," SAE Paper 2003-01-0770, 2003.
5. Heywood, J. B., Internal Combustion Engine Fundamentals, McGraw-Hill, Inc., 1988.
6. Miller, J. A., and Bowman, C. T., "Mechanism and Modeling of Nitrogen Chemistry in Combustion," Progress in Energy and Combustion Science, 15, pp. 287-338, 1989.
7. Hayhurst, A. N., and Vince, I. M., "Nitric Oxide Formation from N2 in Flames: The Importance of "Prompt" NO," Progress in Energy and Combustion Science, 6, pp. 35-51, 1980. (Pubitemid 10079599)
8. Hill, S. C., and Smoot, L. D., "Modeling of Nitrogen Oxides Formation and Destruction in Combustion Systems," Progress in Energy and Combustion Science, 26, pp. 417-458, 2000.
9. Dec, J. E., and Canaan, R. E., "PLIF Imaging of NO Formation in a DI Diesel Engine," SAE Paper 980147, SAE Transactions, 107, No. 3, pp. 176-204, 1998.
10. Flynn, P. F., Hunter, G. L., Durret, R. P., Farrell, L. A., and Akinyemi, O. C., "Minimum Engine Flame Temperature Impacts on Diesel and Spark-Ignition Engine NOx Production," SAE Paper 2000-01-1177, SAE Transactions, 109, No. 3, pp. 1286-1297, 2000.
11. Smyth, K. C., "NO Production and Destruction in a Methane/Air Diffusion Flame," Combustion Science and Technology, 115, pp. 151-176, 1996. (Pubitemid 126541032)
12. Martin, G. C., and Mueller, C. J., "Progress in NO Detection by Planar Laser Induced Fluorescence in a Direct Injection Diesel Engine," ILASS Americas, 16th Annual Conference on Liquid Atomization and Spray Systems, Monterey, CA, 2003.
13. Dec, J. E., and Coy, E. B., "OH Radical Imaging in a DI Diesel Engine and the Structure of the Early Diffusion Flame," SAE Paper 960831, SAE Transactions, 105, No. 3, pp. 1127-1148, 1996.
14. Dec, J. E., "A Conceptual Model of D.I. Diesel Combustion Based on Laser-Sheet Imaging," SAE Paper 970873, SAE Transactions, 106, No. 3, pp. 1319-1348, 1997.
15. Plee, S. L., Ahmad, T., Myers, J. P., and Faeth, G. M., "Diesel NOx Emissions-A Simple Correlation Technique for Intake Air Effects," Proceedings of the Combustion Institute, 19, pp. 1495-1502, 1982. (Pubitemid 13529451)
16. Ahmad, T., and Plee, S. L., "Application of Flame Temperature Correlations to Emissions from a Direct-Injection Diesel Engine," SAE Paper 831734, SAE Transactions, 92, No. 4, pp. 910-920, 1983.
17. Plee, S. L., Ahmad, T., and Myers, J. P., "Flame Temperature Correlation for the Effects of Exhaust Gas Recirculation on Diesel Particulate and NOx Emissions," SAE Paper 811195, SAE Transactions, 90, No. 4, pp. 3738-3754, 1981.
18. Yu, R. C., and Shahed, S. M., "Effects of Injection Timing and Exhaust Gas Recirculation on Emissions from a D.I. Diesel Engine," SAE Paper 811234, SAE Transactions, 90, No. 4, pp. 3873-3883, 1981.
19. Flynn, P. F., "How Chemistry Controls Engine Design," ASME, Proceedings of the 2001 Fall Conference of the ASME Internal Combustion Engine Division, New York, N.Y., 2001.
20. Pierpont, D. A., and Reitz, R., "Effects of Injection Pressure and Nozzle Geometry on D.I. Diesel Emissions and Performance," SAE Paper 950604, SAE Transactions, 104, No. 3, pp. 1041-1050, 1995.
21. Kidoguchi, Y., Yang, C., and Miwa, K., "Effects of Fuel Properties on Combustion and Emissions Characteristics of a Direct-Injection Diesel Engine," SAE Paper 2000-01-1851, SAE Transactions, 109, No. 4, pp. 1149-1157, 2000.
22. Shundoh, S., Komori, M., Tsujimura, K., and Kobayahi, S., "NOx Reduction from Diesel Combustion Using Pilot Injection with High Pressure Fuel Injection," SAE Paper 920461, 1992.
23. Flynn, P. F., Hunter, G. L., Farrell, L. A., Durret, R. P., Akinyemi, O. C., zur Loye, A. O., Westbrook, C. K., and Pitz, W. J., "The Inevitability of Engine-Out NOx Emissions from Spark-Ignited and Diesel Engines," Proceedings of the Combustion Institute, 28, pp. 1211-1218, 2000.
24. Solbrig, C. E., and Litzinger, T. A., "The Effect of Intake Charge Temperature on Combustion and Emissions in an Optically Accessible DI Diesel Engine With and Without Swirl," SAE Paper 902060, 1990.
25. Van Gerpen, J. H., Huang, C.-W., and Borman, G. L., "The Effects of Swirl and Injection Parameters on Diesel Combustion and Heat Transfer," SAE Paper 850265, SAE Transactions, 94, No. 2, pp. 494-511, 1985.
26. Shundoh, S., Kakegawa, T., Tsujimura, K., and Kobayashi, S., "The Effect of Injection Parameters and Swirl on Diesel Combustion with High Pressure Fuel Injection," SAE Paper 910489, SAE Transactions, 100, No. 3, pp. 793-805, 1991. (Pubitemid 23582059)
27. Herzog, P. L., Burgler, L., Winklhofer, E., Zelneka, P., and Cartellieri, W., "NOx Reduction Strategies for DI Diesel Engines," SAE Paper 920470, SAE Transactions, 101, No. 3, pp. 820-836, 1992.
28. Donahue, R. J., Borman, G. L., and Bower, G. R., "Cylinder-Averaged Histories of Nitrogen Oxide in a D.I. Diesel with Simulated Turbocharging," SAE Paper 942046, SAE Transactions, 103, No. 4, pp. 1789-1801, 1994.
29. Nehmer, D. A., and Reitz, R., "Measurement of the Effect of Injection Rate and Split Injection on Diesel Engine Soot and NOx Emissions," SAE Paper 940668, SAE Transactions, 105, No. 3, pp. 1030-1041, 1994.
30. Juva, A., Zelneka, P., and Tritthart, P., "Influences of Diesel Fuel Properties and Ambient Temperature on Engine Operation and Exhaust Emissions," SAE Paper 890012, SAE Transactions, 98, No. 4, pp. 1-11, 1989.
31. Lee, R., Pedley, J., and Hobbs, C., "Fuel Quality Impact on Heavy Duty Diesel Emissions:-A Literature Review," SAE Paper 982649, SAE Transactions, 107, No. 4, pp. 1952-1970, 1998.
32. Li, X., Chippior, W. L., and Gulder, O. L., "Effects of Cetane Enhancing Additives and Ignition Quality on Diesel Engine Emissions," SAE Paper 972968, SAE Transactions, 106, No. 4, pp. 1543-1556, 1997.
33. Naber, J. D., and Siebers, D. L., "Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays," SAE Paper 960034, SAE Transactions, 105, No. 3, pp. 82-111, 1996.
34. Espey, C., Dec, J. E., and Litzinger, T. A., "Quantitative 2-D Fuel Vapor Concentration Imaging in a Firing D.I. Diesel Engine Using Planar Laser-Induced Rayleigh Scattering," SAE Paper 940682, SAE Transactions, 103, No. 3, pp. 1145-1160, 1994.
35. Flynn, P. F., Mizusawa, M., Uyehara, O. A., and Myers, P. S., "An Experimental Determination of the Instantaneous Potential Radiant Heat Transfer Within an Operating Diesel Engine," SAE Paper 720022, SAE Transactions, 81, No. 1, pp. 95-125, 1972.
36. Struwe, F. J., and Foster, D. E., "In Cylinder Measurement of Particulate Radiant Heat Transfer in a Direct Injection Diesel Engine," SAE Paper 2003-01-0072, 2003.
37. Wiedenhoefer, J. F., and Reitz, R., "Multidimensional Modeling of the Effects of Radiation and Soot Deposition in Heavy-Duty Diesel Engines," SAE Paper 2003-01-0560, 2003.
38. Brahma, I., Zhu, X., Frankel, S., and Gore, J. P., "A Study of the Effect of Radiation on Pollutant Emissions in Direct Injection Engines," ASME, Proceedings of the 2001 Fall Technical Conference of the ASME Internal Combustion Engine Division, New York, N.Y., 2001.
39. Uchida, N., Shimokawa, K., Kudo, Y., and Shimoda, M., "Combustion Optimization by Means of Common Rail Injection System for Heavy-Duty Diesel Engines," SAE Paper 982679, 1998.
40. Badami, M., Millo, F., and D'Amato, D. D., "Experimental Investigation on Soot and NOx Formation in a DI Common Rail Diesel Engine with Pilot Injection," SAE Paper 2001-01-0657, SAE Transactions, 110, No. 3, pp. 663-674, 2001.
41. Yang, B., Mellor, A. M., and Chen, S. K., "Multiple Injection with EGR Effects on NOx Emissions for DI Diesel Engines Analyzed Using an Engineering Model," SAE Paper 2002-01-2774, SAE Transactions, 111, 2002.
42. Tow, T. C., Pierpont, D. A., and Reitz, R. D., "Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine," SAE Paper 940897, SAE Transactions, 103, No. 3, pp. 1403-1417, 1994.
43. Akihama, K., Takatori, Y., Inagaki, K., Sasaki, S., and Dean, A. M., "Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature," SAE Paper 2001-01-0655, SAE Transactions, 110, No. 3, pp. 648-662, 2001.
44. Kimura, S., Aoki, O., Ogawa, H., Muranaka, S., and Enomoto, Y., "New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines," SAE Paper 1999-01-3681, SAE Transactions, 108, No. 3, pp. 2128-2137, 1999.
45. Kimura, S., Aoki, O., Kitahara, Y., and Aiyoshizawa, E., "Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards," SAE Paper 2001-01-0200, SAE Transactions, 110, No. 4, pp. 239-248, 2001.
46. Espey, C., and Dec, J. E., "Diesel Engine Combustion Studies in a Newly Designed Optical-Access Engine Using High-Speed Visualization and 2-D Laser Imaging," SAE Paper 930971, SAE Transactions, 99, No. 4, pp. 703-723, 1993.
47. zur Loye, A. O., Siebers, D. L., McKinley, T. L., Ng, H. K., and Primus, R. J., "Cycle-Resolved LDV Measurements in a Motored Diesel Engine and Comparisons with k-epsilon Model Predictions," SAE Paper 890618, SAE Transactions, 96, No. 3, pp. 1142-1158, 1989.
48. Desantes, J. M., Payri, R., Salvador, F. J., and Gimeno, J., "Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles," SAE Paper 2003-01-0703, 2003.
49. Glassman, Irvin, "Soot Formation in Combustion Processes," Proceedings of the Combustion Institute, 22, pp. 295-311, 1988.
50. Musculus, M. P., "Effects of the In-Cylinder Environment on Diffusion Flame Lift-Off in a DI Diesel Engine," SAE Paper 2003-01-0074, 2003.
51. Reynolds, W. C., "The Element Potential Method for Equilibrium Analysis: Implementation of the Interactive Program Stanjan," Department of Mechanical Engineering, Stanford University, 1986.
52. Driscoll, J. F., Chen, R-H, and Yoon, Y., "Nitric Oxide Levels of Turbulent Jet Diffusion Flames: Effects of Residence Time and Damkohler Number," Combustion and Flame, 88, pp. 37-49, 1992.
53. Mueller, C. J., and Martin, G. C., "Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine: Broadband Natural Luminosity Imaging," SAE Paper 2002-01-1631, SAE Transactions, 111, No. 4, 2002.
54. Dec, J. E., Espey, C., and Litzinger, T. A., "Planar Laser Rayleigh Scattering for Quantitative Vapor-Fuel Imaging in a Diesel Jet," Combustion and Flame, 109, pp. 65-86, 1997. (Pubitemid 27150570)
55. Venkatesan, C. P., and Abraham, J., "An Investigation of the Dependence of NO and Soot Emissions from a Diesel Engine on Heat Release Rate Characteristics-I," SAE Paper 2000-01-0509, 2000.
56. Musculus, M. P., Dec, J. E., and Tree, D. R., "Effects of Fuel Parameters and Diffusion Flame Lift-Off on Soot Formation in a Heavy-Duty Diesel Engine," SAE Paper 2002-01-0889, 2002.
57. Shimada, T., Shoji, T., and Takeda, Y., "The Effect of Fuel Injection Pressure on Diesel Engine Performance," SAE Paper 891919, SAE Transactions, 98, No. 3, pp. 1906-1914, 1989.
58. Pickett, L. M., and Siebers, D. L., "Orifice Diameter Effects on Diesel Fuel Jet Flame Structure," Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division, 2001.
59. Mueller, C. J., Pitz, W. J., Pickett, L., Martin, G. C., Siebers, D. L., and Westbrook, C. K., "Effects of Oxygenates on Soot Processes in DI Diesel Engines: Experiments and Numerical Simulations," SAE Paper 2003-01-1791, 2003.
60. Siebers, D., Higgins, B., and Pickett, L., "Flame Lift-Off on Direct-Injection Diesel Fuel Jets: Oxygen Concentration Effects," SAE Paper 2002-01-0890, SAE Transactions, 111, 2002.
61. Siebers, D., and Higgins, B., "Flame Lift-Off on Direct-Injection Diesel Sprays Under Quiescent Conditions," SAE Paper 2001-01-0530, SAE Transactions, 110, No. 3, pp. 400-421, 2001.
62. Hiroyasu, H., and Arai, M., "Structures of Fuel Sprays in Diesel Engines," SAE Paper 900475, SAE Transactions, 99, No. 3, pp. 1050-1061, 1990. (Pubitemid 21723270)
63. Hill, P. G., and Douville, B., "Relating Burning Rate and NO Formation to Pressure Development in Two-Stroke Diesel Engines," Journal of Energy Resources Technology, 119, pp. 129-136, 1997.
64. Easley, W. L., Mellor, A. M., and Plee, S. L., "NO Formation and Decomposition Models for DI Diesel Engines," SAE Paper 2000-01-0582, 2000.
65. Turns, S. R., "Understanding NOx Formation in Nonpremixed Flames: Experiments and Modeling," Progress in Energy and Combustion Science, 21, pp. 361-385, 1995.
66. Matsui, Y., Kamimoto, T., and Matsuoka, S., "A Study on the Time and Space Resolved Measurement of Flame Temperature and Soot Concentration in a D.I. Diesel engine by the Two-Color Method," SAE Paper 790491, SAE Transactions, 88, No. 2, pp. 1808-1822, 1979.
67. Alder, B. J., Tseng, L. K., Laurendeau, N. M., and Gore, J. P., "Effects of Partial Premixing on NOx Emission Indices of Soot-Containing Flames," Combustion Science and Technology, 152, pp. 169-178, 2000.
68. Siebers, D. L., "Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization," SAE Paper 1999-01-0528, SAE Transactions, 108, No. 3, pp. 703-728, 1999.