Prediction of liquid and vapor penetration of high pressure diesel sprays

SAE Technical Papers

Volumn , Issue , 2006, Pages

  Tonini, S ^a   Gavaises, M ^a   Arcoumanis, C ^a   Theodorakakos, A ^b  

^a CITY UNIVERSITY   (United Kingdom)

^b Fluid Research Co   (United Kingdom)

Author keywords

High pressure evaporating diesel sprays; Multi phase flow modelling

Indexed keywords

AERODYNAMIC DRAG; DROPS; HIGH PRESSURE EFFECTS; LAGRANGE MULTIPLIERS; LIQUIDS; STOCHASTIC SYSTEMS;

CHEMICAL COMPOSITIONS; EVAPORATING DIESEL SPRAYS; FRAGMENTATION PROCESS; HIGH PRESSURE DIESEL SPRAYS; INITIAL TEMPERATURES; LOCAL GRID REFINEMENT; NON-EQUILIBRIUM EFFECTS; STOCHASTIC METHODOLOGY;

SPRAY NOZZLES;

EID: 85072429675     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2006-01-0242     Document Type: Conference Paper

References (41)

1. Gold M., Li G., Sapsford S., and Stokes J., "Application of Optical Techniques to the Study of Mixture Preparation in Direct Injection Gasoline Engines and Validation of a CFD Model" SAE Technical Paper 2000-01-0538, 2000.
2. Fan L., and Reitz R.D., "Development of an Ignition and Combustion Model for Spark-Ignition Engines" SAE Technical Paper 2000-01-2809, 2000.
3. Gosman A.D., "State of the art of multi-dimensional modelling of engine reacting flows" Oil&Gas Science and Technology, Vol. 54, No. 2, pp. 149-159, 1999.
4. Tanner F.X., and Reitz R.D., "Scaling aspects of the characteristic time combustion model in the simulation of diesel engines" SAE Technical Paper 1999-01-1175, 1999.
5. Dukowicz J.K., "A particle-fluid numerical model for liquid sprays" J. Comp. Physics, vol. 35, pp. 229-253, 1980.
6. Versaevel P., Motte P., and Wieser K., "A New 3D Model For Vaporizing Diesel Sprays Based on Mixing-Limited Vaporization" SAE Technical Paper 2000-01-0949, 2000.
7. Barroso G., Schneider B., and Boulouchos K., "An Extensive Parametric Study on Diesel Spray Simulation and Verification with Experimental Data" SAE Technical Paper 2003-01-3230, 2003.
8. Larmi M., Rantanen P., Tiainen J., Kiijärvi J., Tanner F.X., and Stalsberg-Zarling K., "Simulation of Non-Evaporating Diesel Sprays and Verification with Experimental Data" SAE Technical Paper 2002-01-0946, 2002.
9. Hieber S.E., "An investigation of the mesh dependence of the stochastic discrete droplet model applied to dense liquid sprays" Master of Science in Mathematics thesis, Michigan Technological University, 2001.
10. Nordin N., "Complex Chemistry Modeling of Diesel Spray Combustion" PhD thesis, Chalmers University of Technology, 2001.
11. Bensler H., Bühren F., Samson E., and Vervisch L., "3-D CFD Analysis of the Combustion Process in a DI Diesel Engine using a Flamelet Model" SAE Technical Paper 2000-01-0662, 2000.
12. Rodatz P., Weisser G., and Tanner F.X., "Assessment of CFD Methods for Large Diesel Engines Equipped with a Common Rail Injection System" SAE Technical Paper 2000-01-0948, 2000.
13. Tristano J.R., Chen Z., Hancq D. A., and Kwok W., "Fully automatic adaptive mesh refinement integrated into the solution process" Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp. 307-314, September 14-17, 2003.
14. Wan J., Kocak S., and Shephard M.S., "Automated Adaptive Forming Simulations" Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp. 323-334, September 14-17, 2003.
15. Malik M., "Volume tracking with adaptive refinement" Master of Applied Science, University of Toronto, 2004.
16. th Diesel Engine Emissions Reduction Conference August 29-September 02, 2004 Coronado, California.
17. Tatschl R., v. Kunsberg Sarre C., and v. Berg E., "IC-engine spray modelling-status and outlook" International Multidimensional Engine Modeling User's Group Meeting at the SAE Congress 2002.
18. Lebas R., Blokkeel G., Beau P.-A., and Demoulin F.-X., "Coupling vaporization model with Eulerian-Lagrangian spray atomization (ELSA) model in diesel engine conditions" SAE Paper 2005-01-0213, 2005.
19. Beau P.-A., Funk M., Lebas R., and Blokkeel G., "Applying quasi-multiphase model to simulate atomization processes in diesel engines: modelling of the slip velocity" SAE Paper 2005-01-0220, 2005.
20. Tonini S., 'Multi-phase flow modelling of fuel injection processes in direct injection diesel and gasoline engines' PhD Thesis, City University London, UK, 2005.
21. Giannadakis, E., Gavaises M., Roth H., and Arcoumanis C., "Cavitation modelling in single-hole diesel injector based on Eulerian-Lagrangian approach". In Proc. THIESEL International Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, Valencia, Spain, 2004.
22. Siebers D.L., "Liquid-Phase Fuel Penetration in Diesel Sprays" SAE Paper 980809, 1998.
23. Ramos J.I., "Internal combustion engine modelling" Hemisphere Publishing Corporation, 1989.
24. Giannadakis E., 'Modelling of cavitation in automotive fuel injector nozzles' PhD Thesis, Imperial College London, UK, 2005.
25. Reitz R.D., and Bracco F.V., "Mechanism of atomisation of a liquid jet" Phys. Fluids, Vol. 25, No 2, pp. 1730-1741, 1982.
26. Huh K.Y., and Gosman A.D., "A phenomenological model of diesel spray atomisation" Proc. Int. Conf. Multiphase Flows, Sept. 24-27, Tsukuba, Japan, 1991.
27. Arcoumanis C., and Gavaises M., "Linking the nozzle flow with spray characteristics in a diesel fuel injection system" Atomization and Sprays, vol. 8, pp. 179-197, 1998
28. Bellan J., and Summerfield M., "Theoretical examination of assumptions commonly used for the gas phase surrounding a burning droplet" Combustion and Flame, No. 33, pp. 107-122, 1978. (Pubitemid 8633497)
29. Poling B.E., Prausnitz J.M., and O'Connell J.P., "The Properties of Liquids and Gases" 5th ed. New York, McGraw-Hill, 2000.
30. Perry, R.H., Green, D.W., "Perry's Chemical Engineers' Handbook" 7th ed. McGraw-Hill, 1997.
31. Arcoumanis C., Gavaises M., and French B., "Effect of fuel injection processes on the structure of diesel sprays" SAE Paper 970799, SAE Transactions, 1997.
32. Hsiang L.-P., and Faeth G.M., "Near limit drop deformation and secondary breakup" Int. J. Multiphase Flow, Vol. 18, pp. 635-652, 1992. (Pubitemid 23559732)
33. Hsiang L.-P., and Faeth G.M., "Drop properties after secondary breakup" Int. J. Multiphase Flow, Vol. 19, No. 5, pp. 721-735, 1993.
34. Faeth G.M., Hsiang L.-P., and Wu P.-K., "Structure and break-up properties of sprays" Int. J. Multiphase Flow, Vol. 21, Suppl., pp. 99-127, 1995.
35. Faeth G.M., and Hsiang L.-P., "Drop deformation and breajup sue to shock wave and steady disturbances" Int. J. Multiphase Flow, Vol. 21, No. 4, pp. 545-560, 1995.
36. Simmons H.C., "The correlation of drop-size distributions in fuel nozzle sprays, Part I: the drop-size/volume-fraction distribution" ASME Trans, Journal of Engineering for Power, July 1997.
37. Xu T.-H., Durst F., and Tropea C., "The three parameter log-hyperbolic distributions and its application to particle sizing" Atomisation and Sprays, Vol. 3, pp. 109-124, 1993.
38. Yanagihara H., "A Study on Combustion Structure of Premixed Compression Ignition Diesel Engines". THIESEL 2002 Conference on Thermo- and Fluid-Dynamic Processes in Diesel Engines, Valencia, September 11-15, 2002.
39. Gavaises M., Arcoumanis C., Roth H., Choi Y.S., and Theodorakakos A., "Nozzle flow and spray development from VCO diesel injector nozzles" THIESEL 2002 Conference on Thermo- and Fluid-Dynamic Processes in Diesel Engines, Valencia, September 11-15, 2002.
40. Feng Z.G., and Michaelides E.E., "Drag coefficients of viscous spheres at intermediate and high Reynolds numbers" Journal of Fluids Engineering-Transactions of the ASME, 123 (4), pp. 841-849, 2001. (Pubitemid 33715607)
41. Rusche, H., and Issa R., "The Effect of Voidage on the Drag Force on Particles,Droplets and Bubbles in Dispersed Two-Phase Flow" in Proc. 2nd Japanese-European Two-Phase Flow Group Meeting, Tsukuba, Japan, 2000.