Characterization of field-aged EGR cooler deposits

SAE Technical Papers

Volumn , Issue , 2010, Pages

  Lance, Michael J ^a   Sluder, Scott ^a   Lewis, Samuel ^a   Storey, John ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING SYSTEMS; DEPOSITS; DIFFERENTIAL THERMAL ANALYSIS; ENERGY DISPERSIVE SPECTROSCOPY; EXHAUST GAS RECIRCULATION; GAS CHROMATOGRAPHY; GAS EMISSIONS; GRAVIMETRIC ANALYSIS; HYDROCARBONS; MASS SPECTROMETRY; NITROGEN OXIDES; OPTICAL DATA STORAGE; OPTICAL MICROSCOPY; PETROLEUM DEPOSITS; REGULATORY COMPLIANCE; SCANNING ELECTRON MICROSCOPY; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

CHEMICAL COMPOSITIONS; DIFFERENTIAL THERMAL ANALYSES (DTA); ENERGY DISPERSIVE SPECTROSCOPIES (EDS); ENGINE MANUFACTURERS; EXHAUST GAS RECIRCULATION (EGR); FOULING MECHANISMS; GAS CHROMATOGRAPHY-MASS SPECTROMETRIES (GC-MS); THERMAL GRAVIMETRIC ANALYSES (TGA);

X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 85072356932     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2010-01-2091     Document Type: Conference Paper

References (20)

1. Dickey, D.W., Ryan, T.W., III, and, Matheaus, A.C., "Nox Control in Heavy-Duty Diesel Engines-What is the Limit?" SAE Technical Paper 980174, 1998, doi: 10.4271/980174.
2. Ishikawa, N., Ohkubo, Y., and, Kudou, K., "Study on the Effects of EGR Cooler Performance on Combustion Properties of the Pre-mixed Compression Ignition Combustion by Multi Cylinder DI Diesel Engine," SAE Technical Paper 2007-01-1881, 2007, doi: 10.4271/2007-01-1881.
3. Pickett, L.M., and, Siebers, D.L., "Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion," SAE Technical Paper 2004-01-1399, 2004, doi: 10.4271/2004-01-1399.
4. Idicheria, C.A., and, Pickett, L.M., "Soot Formation in Diesel Combustion under High-EGR Conditions," SAE Technical Paper 2005-01-3834, 2005, doi: 10.4271/2005-01-3834.
5. Sluder, C.S., and, Wagner, R.M., "An Estimate of Diesel High-Efficiency Clean Combustion Impacts on FTP-75 Aftertreatment Requirements," SAE Technical Paper 2006-01-3311, 2006, doi: 10.4271/2006-01-3311.
6. Lance, M.J., Sluder, C.S., Wang, H., and, Storey, J.M.E., "Direct Measurement of EGR Cooler Deposit Thermal Properties for Improved Understanding of Cooler Fouling," SAE Technical Paper 2009-01-1461, 2009, doi: 10.4271/2009-01-1461.
7. Lepperhoff, G., and, Houben, M., "Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers," SAE Technical Paper 931032, 1993, doi: 10.4271/931032.
8. Zhang, R., Charles, F., Ewing, D., Chang, J.-S., et al., "Effect of Diesel Soot Deposition on the Performance of Exhaust Gas Recirculation Cooling Devices," SAE Technical Paper 2004-01-0122, 2004, doi: 10.4271/2004-01- 0122.
9. Hoard, J., Abarham, M., Styles, D., Giuliano, J.M., et al., "Diesel EGR Cooler Fouling," SAE Int. J. Engines 1 (1): 1234-1250, 2008, doi: 10.4271/2008-01-2475.
10. Sluder, C.S., Storey, J.M.E., Lewis, S.A., Styles, D., et al., "Hydrocarbons and Particulate Matter in EGR Cooler Deposits: Effects of Gas Flow Rate, Coolant Temperature, and Oxidation Catalyst," SAE Int. J. Engines 1 (1): 1196-1204, 2008, doi: 10.4271/2008-01-2467.
11. Sluder, C.S., and, Storey, J.M.E., "EGR Cooler Performance and Degradation: Effects of Biodiesel Blends," SAE Technical Paper 2008-01-2473, 2008, doi: 10.4271/2008-01-2473.
12. Bravo, Y., Lázaro, J.L., and, García-Bernad, J.L., "Study of Fouling Phenomena on EGR Coolers due to Soot Deposits: Development of a Representative Test Method," SAE Technical Paper 2005-01-1143, 2005, doi: 10.4271/2005-01-1143.
13. Bravo, Y., Moreno, F., and, Longo, O., "Improved Characterization of Fouling in Cooled EGR Systems," SAE Technical Paper 2007-01-1257, 2007, doi: 10.4271/2007-01-1257.
14. Grillot, J. M., and, Icart, G., "Fouling of a Cylindrical Probe and a Finned Tube Bundle in a Diesel Exhaust Environment," Experimental Thermal and Fluid Science 1997, 14: 442-454. Elsevier Science, Inc., 1997. (Pubitemid 127408263)
15. Ismail, B., Charles, F., Ewing, D., Cotton, J.S., et al., "Mitigation of the Diesel Soot Deposition Effect on the Exhaust Gas Recirculation (EGR) Cooling Devices for Diesel Engines," SAE Technical Paper 2005-01-0656, 2005, doi: 10.4271/2005-01-0656.
16. Ismail, B., Ewing, D., Cotton, J.S., and, Chang, J.-S., "Characterization of the Soot Deposition Profiles in Diesel Engine Exhaust Gas Recirculation (EGR) Cooling Devices Using a Digital Neutron Radiography Imaging Technique," SAE Technical Paper 2004-01-1433, 2004, doi: 10.4271/2004-01-1433.
17. Charles, F.L.R., Ewing, D., Becard, J., Chang, J.-S., et al., "Optimization of the Exhaust Mass Flow Rate and Coolant Temperature for Exhaust Gas Recirculation (EGR) Cooling Devices Used in Diesel Engines," SAE Technical Paper 2005-01-0654, 2005, doi: 10.4271/2005-01-0654.
18. Usui, S., Ito, K., and, Kato, K., "The Effect of Semi-Circular Micro Riblets on the Deposition of Diesel Exhaust Particulate," SAE Technical Paper 2004-01-0969, 2004, doi: 10.4271/2004-01-0969.
19. Castaño, C., Sánchez, A., Grande, J.A., and, Paz, C., "Advantages in the EGR Cooler Performance by Using Internal Corrugated Tubes Technology," SAE Technical Paper 2007-26-019, 2007, doi: 10.4271/2007-26-019.
20. Teng, H., and, Barnard, M., "Physicochemical Characteristics of Soot Deposits in EGR Coolers," SAE Technical Paper 2010-01-0730, 2010, doi: 10.4271/2010-01-0730.