Direct measurement of EGR cooler deposit thermal properties for improved understanding of cooler fouling

SAE Technical Papers

Volumn , Issue , 2009, Pages

  Lance, Michael J ^a   Sluder, C Scott ^a   Wang, Hsin ^a   Storey, John M E ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COOLING SYSTEMS; DIESEL ENGINES; EXHAUST GAS RECIRCULATION; EXHAUST GASES; FOULING; GAS EMISSIONS; REGULATORY COMPLIANCE; SOOT; SPECIFIC HEAT; TUBES (COMPONENTS); TUBULAR STEEL STRUCTURES;

304 STAINLESS STEEL; CONTROLLED CONDITIONS; DIRECT MEASUREMENT; EXHAUST GAS RECIRCULATION (EGR); GAS TEMPERATURE; SOOT PARTICLES; TEMPERATURE DATA; XENON FLASH LAMPS;

THERMAL CONDUCTIVITY;

EID: 85072494743     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2009-01-1461     Document Type: Conference Paper

References (20)

1. x Control in Heavy-Duty Diesel EnginesWhat is the limit?" SAE Paper Number 980174, SAE International, 1998.
2. Ishikawa N., Ohkubo Y., and Kudou K., "Study on the Effects of EGR Cooler Performance on Combustion Properties of the Pre-Mixed Compression Ignition Combustion by Multi Cylinder DI Diesel Engine," SAE Paper 2007-01-1881, SAE International, 2007.
3. Pickett L. M., and Siebers D. L., "Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion," SAE Paper Number 2004-01-1399, SAE International, 2004.
4. Idicheria C. A., and Pickett L. M., "Soot Formation in Diesel Combustion under High-EGR Conditions," SAE Paper Number 2005-01-3834, SAE International, 2005.
5. Sluder C. S., and Wagner R. M., "An Estimate of Diesel High-Efficiency Clean Combustion Impacts on FTP-75 Aftertreatment Requirements," SAE Paper Number 2006-01-3311, SAE International, 2006.
6. Lepperhoff G., and Houben M., "Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers," SAE Paper Number 931032, Society of Automotive Engineers, 1993.
7. Zhang R., Charles F., Ewing D., Chang J. S., and Cotton J. S., "Effect of Diesel Soot Deposition on the Performance of Exhaust Gas Recirculation Cooling Devices," SAE Paper Number 2004-01-0122, SAE International, 2004.
8. Hoard J. W., Abarham M., Styles D., Giuliano J. M., Sluder C. S., and Storey J. M. E., "Diesel EGR Cooler Fouling," SAE Paper Number 2008-01-2475, SAE International, 2008.
9. Sluder C. S., Storey J. M. E., Styles D., Giuliano J., and Hoard J. W., "Hydrocarbons and Particulate Matter in EGR Cooler Deposits: Effects of Gas Flow Rate, Coolant Temperature, and Oxidation Catalyst," SAE Paper Number 2008-01-2467, SAE International, 2008.
10. Sluder C. S., and Storey J. M. E., "EGR Cooler Performance and Degradation: Effects of Biodiesel Blends," SAE Paper Number 2008-01-2473, SAE International, 2008.
11. Bravo Y., Lazaro J. L., and Garcia-Bernad J., "Study of Fouling Phenomena on EGR Coolers due to Soot Deposits: Development of a Representative Test Method," SAE Paper Number 2005-01-1143, SAE International, 2005.
12. Bravo Y., Moreno F., and Longo O., "Improved Characterization of Fouling in Cooled EGR Systems," SAE Paper Number 2007-01-1257, SAE International, 2007.
13. Grillot J. M., and Icart G., "Fouling of a Cylindrical Probe and a Finned Tube Bundle in a Diesel Exhaust Environment," Experimental Thermal and Fluid Science 1997, 14: 442-454. Elsevier Science, Inc., 1997.
14. Ismail B., Charles F., Ewing D., Cotton J. S., and Chang J-S, "Mitigation of the Diesel Soot Deposition Effect on the Exhaust Gas Recirculation (EGR) Cooling Devices for Diesel Engines" SAE Paper Number 2005-01-0656, SAE International, 2005.
15. Ismail B., Ewing D., Cotton J. S., and Chang J-S., "Characterization of the Soot Deposition Profiles in Diesel Engine Exhaust Gas Recirculation (EGR) Cooling Devices using a Digital Neutron Radiography Imaging Technique," SAE Paper Number 2004-01-1433, SAE International, 2004.
16. Charles F., Ewing D., Becard J., Chang J-S., and Cotton J. S., "Optimization of the Exhaust Mass Flow Rate and Coolant Temperature for Exhaust Gas Recirculation (EGR) Cooling Devices Used in Diesel Engines," SAE Paper Number 2005-01-0654, SAE International, 2005.
17. Usui S., Ito K., and Kato K., "The Effect of Semi-Circular Micro Riblets on the Deposition of Diesel Exhaust Particulate," SAE Paper Number 2004-01-0969, SAE International, 2004.
18. Castano C., Sanchez A., Grande J. A., and Paz C., "Advantages in the EGR Cooler Performance by Using Internal Corrugated Tubes Technology," SAE Paper Number 2007-26-019, SAE International, 2007.
19. Park K., Kittelson D. B., Zachariah M. R., and McMurry P. H., "Measurement of inherent material density of nanoparticle agglomerates," Journal of Nanoparticle Research 6 267-272 (2004).
20. Incropera Frank P., and Dewitt David P., Fundamentals of Heat and Mass Transfer, 3rd Edition. John Wiley & Sons, 1990.