EGR cooler performance and degradation: Effects of biodiesel blends

SAE Technical Papers

Volumn , Issue , 2008, Pages

  Sluder, C Scott ^a   Storey, John M E ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIODIESEL; DEPOSITS; DIESEL FUELS; EXHAUST GAS RECIRCULATION; HYDROCARBONS; POWERTRAINS;

BIO-DIESEL BLENDS; BIO-DIESEL FUEL; COOLANT TEMPERATURE; DEPOSIT FORMATION; EXHAUST GAS RECIRCULATION (EGR); FUEL CHEMISTRY; HYDROCARBON CONTENT; SPECIFIC EFFECTS;

COOLING SYSTEMS;

EID: 85072454660     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2008-01-2473     Document Type: Conference Paper

References (17)

1. x Control in Heavy-Duty Diesel Engines-What is the limit?" SAE Paper Number 980174, Society of Automotive Engineers, 1998.
2. Ishikawa, N., Ohkubo, Y., and Kudou, K., "Study on the Effects of EGR Cooler Performance on Combustion Properties of the Pre-Mixed Compression Ignition Combustion by Multi Cylinder DI Diesel Engine," SAE Paper 2007-01-1881, Society of Automotive Engineers, 2007.
3. Pickett, L. M., and Siebers, D. L., "Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion," SAE Paper Number 2004-01-1399, Society of Automotive Engineers, 2004.
4. Idicheria, C. A., and Pickett, L. M., "Soot Formation in Diesel Combustion under High-EGR Conditions," SAE Paper Number 2005-01-3834, Society of Automotive Engineers, 2005.
5. Sluder, C. S., and Wagner, R. M., "An Estimate of Diesel High-Efficiency Clean Combustion Impacts on FTP-75 Aftertreatment Requirements," SAE Paper Number 2006-01-3311, Society of Automotive Engineers, 2006.
6. Lepperhoff, G., and Houben, M., "Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers," SAE Paper Number 931032, Society of Automotive Engineers, 1993.
7. Zhang, R., Charles, F., Ewing, D., Chang, J. S., and Cotton, J. S., "Effect of Diesel Soot Deposition on the Performance of Exhaust Gas Recirculation Cooling Devices," SAE Paper Number 2004-01-0122, Society of Automotive Engineers, 2004.
8. Bravo, Y., Lazaro, J. L., and Garcia-Bernad, J., "Study of Fouling Phenomena on EGR Coolers due to Soot Deposits: Development of a Representative Test Method," SAE Paper Number 2005-01-1143, Society of Automotive Engineers, 2005.
9. Bravo, Y., Moreno, F., and Longo, O., "Improved Characterization of Fouling in Cooled EGR Systems," SAE Paper Number 2007-01-1257, Society of Automotive Engineers, 2007.
10. Grillot, J. M., and Icart, G., "Fouling of a Cylindrical Probe and a Finned Tube Bundle in a Diesel Exhaust Environment," Experimental Thermal and Fluid Science 1997, 14: 442-454. Elsevier Science, Inc., 1997.
11. Ismail, B., Charles, F., Ewing, D., Cotton, J. S., and Chang, J-S, "Mitigation of the Diesel Soot Deposition Effect on the Exhaust Gas Recirculation (EGR) Cooling Devices for Diesel Engines, SAE Paper Number 2005-01-0656, Society of Automotive Engineers, 2005.
12. Ismail, B., Ewing, D., Cotton, J. S., and Chang, J-S., "Characterization of the Soot Deposition Profiles in Diesel Engine Exhaust Gas Recirculation (EGR) Cooling Devices using a Digital Neutron Radiography Imaging Technique," SAE Paper Number 2004-01-1433, Society of Automotive Engineers, 2004.
13. Charles, F., Ewing, D., Becard, J., Chang, J-S., and Cotton, J. S., "Optimization of the Exhaust Mass Flow Rate and Coolant Temperature for Exhaust Gas Recirculation (EGR) Cooling Devices Used in Diesel Engines," SAE Paper Number 2005-01-0654, Society of Automotive Engineers, 2005.
14. Usui, S., Ito, K., and Kato, K., "The Effect of Semi-Circular Micro Riblets on the Deposition of Diesel Exhaust Particulate," SAE Paper Number 2004-01-0969, Society of Automotive Engineers, 2004.
15. Castano, C., Sanchez, A., Grande, J. A., and Paz, C., "Advantages in the EGR Cooler Performance by Using Internal Corrugated Tubes Technology," SAE Paper Number 2007-26-019, Society of Automotive Engineers, 2007.
16. Incropera, F. P., and DeWitt, D. P., Fundamentals of Heat and Mass Transfer 3rd Edition, John Wiley & Sons, 1990.
17. Bejan, A., Convection Heat Transfer 2nd Edition, John Wiley & Sons, 1995.